]>
Commit | Line | Data |
---|---|---|
11e2191c LV |
1 | /* |
2 | * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | ||
9 | /* AM437x GP EVM */ | |
10 | ||
11 | /dts-v1/; | |
12 | ||
13 | #include "am4372.dtsi" | |
14 | #include <dt-bindings/pinctrl/am43xx.h> | |
c540b476 | 15 | #include <dt-bindings/pwm/pwm.h> |
51724dbb | 16 | #include <dt-bindings/gpio/gpio.h> |
11e2191c LV |
17 | |
18 | / { | |
19 | model = "TI AM437x GP EVM"; | |
20 | compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; | |
c540b476 | 21 | |
0bacb529 SP |
22 | aliases { |
23 | display0 = &lcd0; | |
24 | }; | |
25 | ||
506be3fb B |
26 | vmmcsd_fixed: fixedregulator-sd { |
27 | compatible = "regulator-fixed"; | |
28 | regulator-name = "vmmcsd_fixed"; | |
29 | regulator-min-microvolt = <3300000>; | |
30 | regulator-max-microvolt = <3300000>; | |
31 | enable-active-high; | |
32 | }; | |
33 | ||
b2873bfa DG |
34 | vtt_fixed: fixedregulator-vtt { |
35 | compatible = "regulator-fixed"; | |
36 | regulator-name = "vtt_fixed"; | |
37 | regulator-min-microvolt = <1500000>; | |
38 | regulator-max-microvolt = <1500000>; | |
39 | regulator-always-on; | |
40 | regulator-boot-on; | |
41 | enable-active-high; | |
42 | gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; | |
43 | }; | |
44 | ||
c540b476 SP |
45 | backlight { |
46 | compatible = "pwm-backlight"; | |
47 | pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; | |
48 | brightness-levels = <0 51 53 56 62 75 101 152 255>; | |
49 | default-brightness-level = <8>; | |
50 | }; | |
51724dbb SP |
51 | |
52 | matrix_keypad: matrix_keypad@0 { | |
53 | compatible = "gpio-matrix-keypad"; | |
54 | debounce-delay-ms = <5>; | |
55 | col-scan-delay-us = <2>; | |
56 | ||
57 | row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */ | |
58 | &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ | |
59 | &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ | |
60 | ||
61 | col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */ | |
62 | &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */ | |
63 | ||
64 | linux,keymap = <0x00000201 /* P1 */ | |
65 | 0x00010202 /* P2 */ | |
66 | 0x01000067 /* UP */ | |
67 | 0x0101006a /* RIGHT */ | |
68 | 0x02000069 /* LEFT */ | |
69 | 0x0201006c>; /* DOWN */ | |
70 | }; | |
0bacb529 SP |
71 | |
72 | lcd0: display { | |
73 | compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; | |
74 | label = "lcd"; | |
75 | ||
76 | pinctrl-names = "default"; | |
77 | pinctrl-0 = <&lcd_pins>; | |
78 | ||
79 | /* | |
80 | * SelLCDorHDMI, LOW to select HDMI. This is not really the | |
81 | * panel's enable GPIO, but we don't have HDMI driver support nor | |
82 | * support to switch between two displays, so using this gpio as | |
83 | * panel's enable should be safe. | |
84 | */ | |
85 | enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; | |
86 | ||
87 | panel-timing { | |
88 | clock-frequency = <33000000>; | |
89 | hactive = <800>; | |
90 | vactive = <480>; | |
91 | hfront-porch = <210>; | |
92 | hback-porch = <16>; | |
93 | hsync-len = <30>; | |
94 | vback-porch = <10>; | |
95 | vfront-porch = <22>; | |
96 | vsync-len = <13>; | |
97 | hsync-active = <0>; | |
98 | vsync-active = <0>; | |
99 | de-active = <1>; | |
100 | pixelclk-active = <1>; | |
101 | }; | |
102 | ||
103 | port { | |
104 | lcd_in: endpoint { | |
105 | remote-endpoint = <&dpi_out>; | |
106 | }; | |
107 | }; | |
108 | }; | |
11e2191c LV |
109 | }; |
110 | ||
111 | &am43xx_pinmux { | |
112 | i2c0_pins: i2c0_pins { | |
113 | pinctrl-single,pins = < | |
114 | 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ | |
115 | 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ | |
116 | >; | |
117 | }; | |
118 | ||
119 | i2c1_pins: i2c1_pins { | |
120 | pinctrl-single,pins = < | |
121 | 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ | |
122 | 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ | |
123 | >; | |
124 | }; | |
c540b476 | 125 | |
506be3fb B |
126 | mmc1_pins: pinmux_mmc1_pins { |
127 | pinctrl-single,pins = < | |
128 | 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ | |
129 | >; | |
130 | }; | |
131 | ||
c540b476 SP |
132 | ecap0_pins: backlight_pins { |
133 | pinctrl-single,pins = < | |
134 | 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ | |
135 | >; | |
136 | }; | |
0ebc1e25 SN |
137 | |
138 | pixcir_ts_pins: pixcir_ts_pins { | |
139 | pinctrl-single,pins = < | |
140 | 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ | |
141 | >; | |
142 | }; | |
7b25babf M |
143 | |
144 | cpsw_default: cpsw_default { | |
145 | pinctrl-single,pins = < | |
146 | /* Slave 1 */ | |
147 | 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ | |
148 | 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ | |
149 | 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ | |
150 | 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ | |
151 | 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ | |
152 | 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ | |
153 | 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ | |
154 | 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ | |
155 | 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ | |
156 | 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ | |
157 | 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ | |
158 | 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ | |
159 | >; | |
160 | }; | |
161 | ||
162 | cpsw_sleep: cpsw_sleep { | |
163 | pinctrl-single,pins = < | |
164 | /* Slave 1 reset value */ | |
165 | 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
166 | 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
167 | 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
168 | 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
169 | 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
170 | 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
171 | 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
172 | 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
173 | 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
174 | 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
175 | 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
176 | 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
177 | >; | |
178 | }; | |
179 | ||
180 | davinci_mdio_default: davinci_mdio_default { | |
181 | pinctrl-single,pins = < | |
182 | /* MDIO */ | |
183 | 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ | |
184 | 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ | |
185 | >; | |
186 | }; | |
187 | ||
188 | davinci_mdio_sleep: davinci_mdio_sleep { | |
189 | pinctrl-single,pins = < | |
190 | /* MDIO reset value */ | |
191 | 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
192 | 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
193 | >; | |
194 | }; | |
99ffa642 PG |
195 | |
196 | nand_flash_x8: nand_flash_x8 { | |
197 | pinctrl-single,pins = < | |
198 | 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */ | |
199 | 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ | |
200 | 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ | |
201 | 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ | |
202 | 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ | |
203 | 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ | |
204 | 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ | |
205 | 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ | |
206 | 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ | |
207 | 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ | |
208 | 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ | |
209 | 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ | |
210 | 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ | |
211 | 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ | |
212 | 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ | |
213 | 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ | |
214 | >; | |
215 | }; | |
0bacb529 SP |
216 | |
217 | dss_pins: dss_pins { | |
218 | pinctrl-single,pins = < | |
219 | 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ | |
220 | 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
221 | 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
222 | 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
223 | 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
224 | 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
225 | 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
226 | 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ | |
227 | 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ | |
228 | 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
229 | 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
230 | 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
231 | 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
232 | 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
233 | 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
234 | 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
235 | 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
236 | 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
237 | 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
238 | 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
239 | 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
240 | 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
241 | 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
242 | 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ | |
243 | 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ | |
244 | 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ | |
245 | 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ | |
246 | 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ | |
247 | ||
248 | >; | |
249 | }; | |
250 | ||
251 | lcd_pins: lcd_pins { | |
252 | pinctrl-single,pins = < | |
253 | /* GPIO 5_8 to select LCD / HDMI */ | |
254 | 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) | |
255 | >; | |
256 | }; | |
11e2191c LV |
257 | }; |
258 | ||
259 | &i2c0 { | |
260 | status = "okay"; | |
261 | pinctrl-names = "default"; | |
262 | pinctrl-0 = <&i2c0_pins>; | |
263 | }; | |
264 | ||
265 | &i2c1 { | |
266 | status = "okay"; | |
267 | pinctrl-names = "default"; | |
268 | pinctrl-0 = <&i2c1_pins>; | |
0ebc1e25 SN |
269 | |
270 | pixcir_ts@5c { | |
271 | compatible = "pixcir,pixcir_tangoc"; | |
272 | pinctrl-names = "default"; | |
273 | pinctrl-0 = <&pixcir_ts_pins>; | |
274 | reg = <0x5c>; | |
275 | interrupt-parent = <&gpio3>; | |
276 | interrupts = <22 0>; | |
277 | ||
278 | attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; | |
279 | ||
280 | x-size = <1024>; | |
281 | y-size = <600>; | |
282 | }; | |
11e2191c | 283 | }; |
c540b476 SP |
284 | |
285 | &epwmss0 { | |
286 | status = "okay"; | |
287 | }; | |
288 | ||
289 | &ecap0 { | |
290 | status = "okay"; | |
291 | pinctrl-names = "default"; | |
292 | pinctrl-0 = <&ecap0_pins>; | |
293 | }; | |
d3d46cca | 294 | |
506be3fb B |
295 | &gpio0 { |
296 | status = "okay"; | |
297 | }; | |
298 | ||
d3d46cca SP |
299 | &gpio3 { |
300 | status = "okay"; | |
301 | }; | |
302 | ||
303 | &gpio4 { | |
304 | status = "okay"; | |
305 | }; | |
506be3fb | 306 | |
1ff3859e DG |
307 | &gpio5 { |
308 | status = "okay"; | |
309 | ti,no-reset-on-init; | |
310 | }; | |
311 | ||
506be3fb B |
312 | &mmc1 { |
313 | status = "okay"; | |
314 | vmmc-supply = <&vmmcsd_fixed>; | |
315 | bus-width = <4>; | |
316 | pinctrl-names = "default"; | |
317 | pinctrl-0 = <&mmc1_pins>; | |
318 | cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; | |
319 | }; | |
b5820d3a GC |
320 | |
321 | &usb2_phy1 { | |
322 | status = "okay"; | |
323 | }; | |
324 | ||
325 | &usb1 { | |
326 | dr_mode = "peripheral"; | |
327 | status = "okay"; | |
328 | }; | |
329 | ||
330 | &usb2_phy2 { | |
331 | status = "okay"; | |
332 | }; | |
333 | ||
334 | &usb2 { | |
335 | dr_mode = "host"; | |
336 | status = "okay"; | |
337 | }; | |
7b25babf M |
338 | |
339 | &mac { | |
340 | slaves = <1>; | |
341 | pinctrl-names = "default", "sleep"; | |
342 | pinctrl-0 = <&cpsw_default>; | |
343 | pinctrl-1 = <&cpsw_sleep>; | |
344 | status = "okay"; | |
345 | }; | |
346 | ||
347 | &davinci_mdio { | |
348 | pinctrl-names = "default", "sleep"; | |
349 | pinctrl-0 = <&davinci_mdio_default>; | |
350 | pinctrl-1 = <&davinci_mdio_sleep>; | |
351 | status = "okay"; | |
352 | }; | |
353 | ||
354 | &cpsw_emac0 { | |
355 | phy_id = <&davinci_mdio>, <0>; | |
356 | phy-mode = "rgmii"; | |
357 | }; | |
99ffa642 PG |
358 | |
359 | &elm { | |
360 | status = "okay"; | |
361 | }; | |
362 | ||
363 | &gpmc { | |
364 | status = "okay"; | |
365 | pinctrl-names = "default"; | |
366 | pinctrl-0 = <&nand_flash_x8>; | |
367 | ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ | |
368 | nand@0,0 { | |
369 | reg = <0 0 4>; /* device IO registers */ | |
370 | ti,nand-ecc-opt = "bch8"; | |
371 | ti,elm-id = <&elm>; | |
372 | nand-bus-width = <8>; | |
373 | gpmc,device-width = <1>; | |
374 | gpmc,sync-clk-ps = <0>; | |
375 | gpmc,cs-on-ns = <0>; | |
376 | gpmc,cs-rd-off-ns = <40>; | |
377 | gpmc,cs-wr-off-ns = <40>; | |
378 | gpmc,adv-on-ns = <0>; | |
379 | gpmc,adv-rd-off-ns = <25>; | |
380 | gpmc,adv-wr-off-ns = <25>; | |
381 | gpmc,we-on-ns = <0>; | |
382 | gpmc,we-off-ns = <20>; | |
383 | gpmc,oe-on-ns = <3>; | |
384 | gpmc,oe-off-ns = <30>; | |
385 | gpmc,access-ns = <30>; | |
386 | gpmc,rd-cycle-ns = <40>; | |
387 | gpmc,wr-cycle-ns = <40>; | |
388 | gpmc,wait-pin = <0>; | |
389 | gpmc,wait-on-read; | |
390 | gpmc,wait-on-write; | |
391 | gpmc,bus-turnaround-ns = <0>; | |
392 | gpmc,cycle2cycle-delay-ns = <0>; | |
393 | gpmc,clk-activation-ns = <0>; | |
394 | gpmc,wait-monitoring-ns = <0>; | |
395 | gpmc,wr-access-ns = <40>; | |
396 | gpmc,wr-data-mux-bus-ns = <0>; | |
397 | /* MTD partition table */ | |
398 | /* All SPL-* partitions are sized to minimal length | |
399 | * which can be independently programmable. For | |
400 | * NAND flash this is equal to size of erase-block */ | |
401 | #address-cells = <1>; | |
402 | #size-cells = <1>; | |
403 | partition@0 { | |
404 | label = "NAND.SPL"; | |
405 | reg = <0x00000000 0x00040000>; | |
406 | }; | |
407 | partition@1 { | |
408 | label = "NAND.SPL.backup1"; | |
409 | reg = <0x00040000 0x00040000>; | |
410 | }; | |
411 | partition@2 { | |
412 | label = "NAND.SPL.backup2"; | |
413 | reg = <0x00080000 0x00040000>; | |
414 | }; | |
415 | partition@3 { | |
416 | label = "NAND.SPL.backup3"; | |
417 | reg = <0x000c0000 0x00040000>; | |
418 | }; | |
419 | partition@4 { | |
420 | label = "NAND.u-boot-spl-os"; | |
421 | reg = <0x00100000 0x00080000>; | |
422 | }; | |
423 | partition@5 { | |
424 | label = "NAND.u-boot"; | |
425 | reg = <0x00180000 0x00100000>; | |
426 | }; | |
427 | partition@6 { | |
428 | label = "NAND.u-boot-env"; | |
429 | reg = <0x00280000 0x00040000>; | |
430 | }; | |
431 | partition@7 { | |
432 | label = "NAND.u-boot-env.backup1"; | |
433 | reg = <0x002c0000 0x00040000>; | |
434 | }; | |
435 | partition@8 { | |
436 | label = "NAND.kernel"; | |
437 | reg = <0x00300000 0x00700000>; | |
438 | }; | |
439 | partition@9 { | |
440 | label = "NAND.file-system"; | |
441 | reg = <0x00a00000 0x1f600000>; | |
442 | }; | |
443 | }; | |
444 | }; | |
0bacb529 SP |
445 | |
446 | &dss { | |
447 | status = "ok"; | |
448 | ||
449 | pinctrl-names = "default"; | |
450 | pinctrl-0 = <&dss_pins>; | |
451 | ||
452 | port { | |
453 | dpi_out: endpoint@0 { | |
454 | remote-endpoint = <&lcd_in>; | |
455 | data-lines = <24>; | |
456 | }; | |
457 | }; | |
458 | }; |