]>
Commit | Line | Data |
---|---|---|
85a9efcd VD |
1 | /* |
2 | * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC). | |
3 | * | |
4 | * Copyright (C) 2015 Seagate | |
5 | * | |
6 | * Author: Vincent Donnefort <vdonnefort@gmail.com> | |
7 | * | |
8 | * This file is licensed under the terms of the GNU General Public | |
9 | * License version 2. This program is licensed "as is" without any | |
10 | * warranty of any kind, whether express or implied. | |
11 | */ | |
12 | ||
13 | /* | |
14 | * TODO: add support for the white SATA LEDs associated with HDD 0 and 1. | |
15 | */ | |
16 | ||
17 | #include "armada-370.dtsi" | |
18 | #include <dt-bindings/gpio/gpio.h> | |
19 | #include <dt-bindings/input/input.h> | |
20 | ||
21 | / { | |
22 | chosen { | |
23 | stdout-path = "serial0:115200n8"; | |
24 | }; | |
25 | ||
26 | memory { | |
27 | device_type = "memory"; | |
28 | reg = <0x00000000 0x20000000>; /* 512 MB */ | |
29 | }; | |
30 | ||
31 | soc { | |
32 | ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 | |
33 | MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; | |
34 | ||
35 | pcie-controller { | |
36 | status = "okay"; | |
37 | ||
38 | /* USB 3.0 bridge ASM1042A */ | |
39 | pcie@2,0 { | |
40 | status = "okay"; | |
41 | }; | |
42 | }; | |
43 | ||
44 | internal-regs { | |
45 | serial@12000 { | |
46 | status = "okay"; | |
47 | }; | |
48 | ||
49 | sata@a0000 { | |
50 | nr-ports = <2>; | |
51 | status = "okay"; | |
52 | }; | |
53 | ||
54 | mdio { | |
55 | pinctrl-0 = <&mdio_pins>; | |
56 | pinctrl-names = "default"; | |
57 | ||
58 | phy0: ethernet-phy@0 { | |
59 | reg = <0>; | |
60 | }; | |
61 | }; | |
62 | ||
63 | ethernet@70000 { | |
64 | status = "okay"; | |
65 | pinctrl-0 = <&ge0_rgmii_pins>; | |
66 | pinctrl-names = "default"; | |
67 | phy = <&phy0>; | |
68 | phy-mode = "rgmii-id"; | |
69 | }; | |
70 | ||
71 | i2c@11000 { | |
72 | status = "okay"; | |
73 | pinctrl-0 = <&i2c0_pins>; | |
74 | pinctrl-names = "default"; | |
75 | clock-frequency = <100000>; | |
76 | ||
77 | /* RTC - NXP 8563T (second source) */ | |
78 | rtc@51 { | |
79 | compatible = "nxp,pcf8563"; | |
80 | reg = <0x51>; | |
81 | interrupts = <110>; | |
82 | }; | |
83 | /* RTC - MCP7940NT */ | |
84 | rtc@6f { | |
85 | compatible = "microchip,mcp7941x"; | |
86 | reg = <0x6f>; | |
87 | interrupts = <110>; | |
88 | }; | |
89 | }; | |
90 | ||
91 | nand@d0000 { | |
92 | status = "okay"; | |
93 | num-cs = <1>; | |
94 | marvell,nand-keep-config; | |
95 | marvell,nand-enable-arbiter; | |
96 | nand-on-flash-bbt; | |
97 | nand-ecc-strength = <4>; | |
98 | nand-ecc-step-size = <512>; | |
99 | ||
100 | partition@0 { | |
101 | label = "u-boot"; | |
102 | reg = <0x0 0x300000>; | |
103 | }; | |
104 | partition@300000 { | |
105 | label = "device-tree"; | |
106 | reg = <0x300000 0x20000>; | |
107 | }; | |
108 | partition@320000 { | |
109 | label = "linux"; | |
110 | reg = <0x320000 0x2000000>; | |
111 | }; | |
112 | partition@2320000 { | |
113 | label = "rootfs"; | |
114 | reg = <0x2320000 0xdce0000>; | |
115 | }; | |
116 | }; | |
117 | }; | |
118 | ||
119 | }; | |
120 | ||
121 | regulators { | |
122 | compatible = "simple-bus"; | |
123 | #address-cells = <1>; | |
124 | #size-cells = <0>; | |
125 | pinctrl-names = "default"; | |
126 | ||
127 | regulator@1 { | |
128 | compatible = "regulator-fixed"; | |
129 | reg = <1>; | |
130 | regulator-name = "SATA0 power"; | |
131 | regulator-min-microvolt = <5000000>; | |
132 | regulator-max-microvolt = <5000000>; | |
133 | enable-active-high; | |
134 | regulator-always-on; | |
135 | regulator-boot-on; | |
136 | gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; | |
137 | }; | |
138 | regulator@2 { | |
139 | compatible = "regulator-fixed"; | |
140 | reg = <2>; | |
141 | regulator-name = "SATA1 power"; | |
142 | regulator-min-microvolt = <5000000>; | |
143 | regulator-max-microvolt = <5000000>; | |
144 | enable-active-high; | |
145 | regulator-always-on; | |
146 | regulator-boot-on; | |
147 | gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; | |
148 | }; | |
149 | }; | |
150 | ||
151 | gpio-fan { | |
152 | compatible = "gpio-fan"; | |
153 | gpios = <&gpio2 0 GPIO_ACTIVE_HIGH | |
154 | &gpio2 1 GPIO_ACTIVE_HIGH>; | |
155 | }; | |
156 | ||
157 | gpio-keys { | |
158 | compatible = "gpio-keys"; | |
159 | #address-cells = <1>; | |
160 | #size-cells = <0>; | |
161 | ||
162 | button@1 { | |
163 | label = "Power button"; | |
164 | linux,code = <KEY_POWER>; | |
165 | gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; | |
166 | debounce-interval = <100>; | |
167 | }; | |
168 | button@2 { | |
169 | label = "Backup button"; | |
170 | linux,code = <KEY_OPTION>; | |
171 | gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; | |
172 | debounce-interval = <100>; | |
173 | }; | |
174 | button@3 { | |
175 | label = "Reset Button"; | |
176 | linux,code = <KEY_RESTART>; | |
177 | gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; | |
178 | debounce-interval = <100>; | |
179 | }; | |
180 | }; | |
181 | ||
182 | gpio-leds { | |
183 | compatible = "gpio-leds"; | |
184 | ||
185 | white-power { | |
186 | label = "dart:white:power"; | |
187 | gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; | |
188 | linux,default-trigger = "timer"; | |
189 | ||
190 | }; | |
191 | red-power { | |
192 | label = "dart:red:power"; | |
193 | gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; | |
194 | }; | |
195 | red-sata0 { | |
196 | label = "dart:red:sata0"; | |
197 | gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; | |
198 | }; | |
199 | red-sata1 { | |
200 | label = "dart:red:sata1"; | |
201 | gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; | |
202 | }; | |
203 | }; | |
204 | ||
205 | gpio_poweroff { | |
206 | compatible = "gpio-poweroff"; | |
207 | gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; | |
208 | }; | |
209 | }; | |
210 | ||
211 | &pinctrl { | |
212 | pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>; | |
213 | pinctrl-names = "default"; | |
214 | ||
215 | hdd0_led_sata_pin: hdd0-led-sata-pin { | |
216 | marvell,pins = "mpp48"; | |
217 | marvell,function = "sata1"; | |
218 | }; | |
219 | hdd0_led_gpio_pin: hdd0-led-gpio-pin { | |
220 | marvell,pins = "mpp48"; | |
221 | marvell,function = "gpio"; | |
222 | }; | |
223 | hdd1_led_sata_pin: hdd1-led-sata-pin { | |
224 | marvell,pins = "mpp57"; | |
225 | marvell,function = "sata0"; | |
226 | }; | |
227 | hdd1_led_gpio_pin: hdd1-led-gpio-pin { | |
228 | marvell,pins = "mpp57"; | |
229 | marvell,function = "gpio"; | |
230 | }; | |
231 | }; |