[mirror_ubuntu-artful-kernel.git] / arch / arm / boot / dts / armada-370-synology-ds213j.dts

/*
 * Device Tree file for Synology DS213j
 *
 * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 *
 * Note: this Device Tree assumes that the bootloader has remapped the
 * internal registers to 0xf1000000 (instead of the old 0xd0000000).
 * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
 * bootloaders provided by Marvell. It is used in recent versions of
 * DSM software provided by Synology. Nonetheless, some earlier boards
 * were delivered with an older version of u-boot that left internal
 * registers mapped at 0xd0000000. If you have such a device you will
 * not be able to directly boot a kernel based on this Device Tree. In
 * that case, the preferred solution is to update your bootloader (e.g.
 * by upgrading to latest version of DSM, or building a new one and
 * installing it from u-boot prompt) or adjust the Devive Tree
 * (s/0xf1000000/0xd0000000/ in 'ranges' below).
 */

/dts-v1/;

#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"

/ {
	model = "Synology DS213j";
	compatible = "synology,ds213j", "marvell,armada370",
		     "marvell,armada-370-xp";

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x20000000>; /* 512 MB */
	};

	soc {
		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;

		internal-regs {

			/* RTC provided by Seiko S-35390A I2C RTC chip below */
			rtc@10300 {
				status = "disabled";
			};

			spi0: spi@10600 {
				status = "okay";

				spi-flash@0 {
					#address-cells = <1>;
					#size-cells = <1>;
					compatible = "micron,n25q064", "jedec,spi-nor";
					reg = <0>; /* Chip select 0 */
					spi-max-frequency = <20000000>;

					/*
					 * Warning!
					 *
					 * Synology u-boot uses its compiled-in environment
					 * and it seems Synology did not care to change u-boot
					 * default configuration in order to allow saving a
					 * modified environment at a sensible location. So,
					 * if you do a 'saveenv' under u-boot, your modified
					 * environment will be saved at 1MB after the start
					 * of the flash, i.e. in the middle of the uImage.
					 * For that reason, it is strongly advised not to
					 * change the default environment, unless you know
					 * what you are doing.
					 */
					partition@00000000 { /* u-boot */
						label = "RedBoot";
						reg = <0x00000000 0x000c0000>; /* 768KB */
					};

					partition@000c0000 { /* uImage */
						label = "zImage";
						reg = <0x000c0000 0x002d0000>; /* 2880KB */
					};

					partition@00390000 { /* uInitramfs */
						label = "rd.gz";
						reg = <0x00390000 0x00440000>; /* 4250KB */
					};

					partition@007d0000 { /* MAC address and serial number */
						label = "vendor";
						reg = <0x007d0000 0x00010000>; /* 64KB */
					};

					partition@007e0000 {
						label = "RedBoot config";
						reg = <0x007e0000 0x00010000>; /* 64KB */
					};

					partition@007f0000 {
						label = "FIS directory";
						reg = <0x007f0000 0x00010000>; /* 64KB */
					};
				};
			};

			i2c@11000 {
				compatible = "marvell,mv64xxx-i2c";
				pinctrl-0 = <&i2c0_pins>;
				pinctrl-names = "default";
				clock-frequency = <400000>;
				status = "okay";

				/* Main device RTC chip */
				s35390a: s35390a@30 {
					 compatible = "sii,s35390a";
					 reg = <0x30>;
				};
			};

			/* Connected to a header on device's PCB */
			serial@12000 {
				status = "okay";
			};

			/* Connected to a TI MSP430F2111 for power control */
			serial@12100 {
				status = "okay";
			};

			poweroff@12100 {
				compatible = "synology,power-off";
				reg = <0x12100 0x100>;
				clocks = <&coreclk 0>;
			};

			/* rear USB port, near reset button */
			usb@50000 {
				status = "okay";
			};

			/* rear USB port, near RJ45 port */
			usb@51000 {
				status = "okay";
			};

			mdio {
				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
					reg = <1>;
				};
			};

			ethernet@70000 {
			       status = "okay";
			       phy = <&phy1>;
			       phy-mode = "sgmii";
			};

			sata@a0000 {
				nr-ports = <2>;
				status = "okay";
			};
		};
	};

	gpio-fan-32-38 {
		status = "okay";
		compatible = "gpio-fan";
		pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
			     &fan_ctrl_high_pin &fan_alarm_pin>;
		pinctrl-names = "default";
		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
			 &gpio2  0 GPIO_ACTIVE_HIGH
			 &gpio2  1 GPIO_ACTIVE_HIGH>;
		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
		gpio-fan,speed-map = <    0 0
				       1000 1
				       1150 2
				       1350 4
				       1500 3
				       1650 5
				       1750 6
				       1900 7 >;
	};

	gpio-leds {
		compatible = "gpio-leds";
		pinctrl-0 = <&disk1_led_pin
			     &disk2_led_pin>;
		pinctrl-names = "default";

		disk1-led-amber {
			label = "synology:amber:disk1";
			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};

		disk2-led-amber {
			label = "synology:amber:disk2";
			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
		pinctrl-names = "default";

		sata1_regulator: sata1-regulator {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "SATA1 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			startup-delay-us = <2000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
		};

		sata2_regulator: sata2-regulator {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "SATA2 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			startup-delay-us = <4000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
		};
	};
};

&pinctrl {
	disk1_led_pin: disk1-led-pin {
		marvell,pins = "mpp31";
		marvell,function = "gpio";
	};

	disk2_led_pin: disk2-led-pin {
		marvell,pins = "mpp32";
		marvell,function = "gpio";
	};

	sata1_pwr_pin: sata1-pwr-pin {
		marvell,pins = "mpp37";
		marvell,function = "gpio";
	};

	sata2_pwr_pin: sata2-pwr-pin {
		marvell,pins = "mpp62";
		marvell,function = "gpio";
	};

	sata1_pres_pin: sata1-pres-pin {
		marvell,pins = "mpp60";
		marvell,function = "gpio";
	};

	sata2_pres_pin: sata2-pres-pin {
		marvell,pins = "mpp48";
		marvell,function = "gpio";
	};

	syno_id_bit0_pin: syno-id-bit0-pin {
		marvell,pins = "mpp55";
		marvell,function = "gpio";
	};

	syno_id_bit1_pin: syno-id-bit1-pin {
		marvell,pins = "mpp56";
		marvell,function = "gpio";
	};

	syno_id_bit2_pin: syno-id-bit2-pin {
		marvell,pins = "mpp57";
		marvell,function = "gpio";
	};

	syno_id_bit3_pin: syno-id-bit3-pin {
		marvell,pins = "mpp58";
		marvell,function = "gpio";
	};

	fan_ctrl_low_pin: fan-ctrl-low-pin {
		marvell,pins = "mpp65";
		marvell,function = "gpio";
	};

	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
		marvell,pins = "mpp64";
		marvell,function = "gpio";
	};

	fan_ctrl_high_pin: fan-ctrl-high-pin {
		marvell,pins = "mpp63";
		marvell,function = "gpo";
	};

	fan_alarm_pin: fan-alarm-pin {
		marvell,pins = "mpp38";
		marvell,function = "gpio";
	};
};
Commit	Line	Data
0e76f78c AE	1	/*
	2	* Device Tree file for Synology DS213j
	3	*
	4	* Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
	5	*
f14855ee GC	6	* This file is dual-licensed: you can use it either under the terms
	7	* of the GPL or the X11 license, at your option. Note that this dual
	8	* licensing only applies to this file, and not this project as a
	9	* whole.
	10	*
	11	* a) This file is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of the
	14	* License, or (at your option) any later version.
	15	*
	16	* This file is distributed in the hope that it will be useful
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* Or, alternatively
	22	*
	23	* b) Permission is hereby granted, free of charge, to any person
	24	* obtaining a copy of this software and associated documentation
	25	* files (the "Software"), to deal in the Software without
	26	* restriction, including without limitation the rights to use
	27	* copy, modify, merge, publish, distribute, sublicense, and/or
	28	* sell copies of the Software, and to permit persons to whom the
	29	* Software is furnished to do so, subject to the following
	30	* conditions:
	31	*
	32	* The above copyright notice and this permission notice shall be
	33	* included in all copies or substantial portions of the Software.
	34	*
	35	* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
	36	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	37	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	38	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	39	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
	40	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	41	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	42	* OTHER DEALINGS IN THE SOFTWARE.
0e76f78c AE	43	*
	44	* Note: this Device Tree assumes that the bootloader has remapped the
	45	* internal registers to 0xf1000000 (instead of the old 0xd0000000).
	46	* The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
	47	* bootloaders provided by Marvell. It is used in recent versions of
	48	* DSM software provided by Synology. Nonetheless, some earlier boards
	49	* were delivered with an older version of u-boot that left internal
	50	* registers mapped at 0xd0000000. If you have such a device you will
	51	* not be able to directly boot a kernel based on this Device Tree. In
	52	* that case, the preferred solution is to update your bootloader (e.g.
	53	* by upgrading to latest version of DSM, or building a new one and
	54	* installing it from u-boot prompt) or adjust the Devive Tree
	55	* (s/0xf1000000/0xd0000000/ in 'ranges' below).
	56	*/
	57
	58	/dts-v1/;
	59
	60	#include <dt-bindings/input/input.h>
	61	#include <dt-bindings/gpio/gpio.h>
	62	#include "armada-370.dtsi"
	63
	64	/ {
	65	model = "Synology DS213j";
	66	compatible = "synology,ds213j", "marvell,armada370",
	67	"marvell,armada-370-xp";
	68
	69	chosen {
9552203c	70	stdout-path = "serial0:115200n8";
0e76f78c AE	71	};
	72
	73	memory {
	74	device_type = "memory";
	75	reg = <0x00000000 0x20000000>; /* 512 MB */
	76	};
	77
	78	soc {
	79	ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
	80	MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
	81
	82	internal-regs {
	83
	84	/* RTC provided by Seiko S-35390A I2C RTC chip below */
	85	rtc@10300 {
	86	status = "disabled";
	87	};
	88
	89	spi0: spi@10600 {
	90	status = "okay";
	91
	92	spi-flash@0 {
	93	#address-cells = <1>;
	94	#size-cells = <1>;
e9f3ed4a	95	compatible = "micron,n25q064", "jedec,spi-nor";
0e76f78c AE	96	reg = <0>; /* Chip select 0 */
	97	spi-max-frequency = <20000000>;
	98
	99	/*
	100	* Warning!
	101	*
	102	* Synology u-boot uses its compiled-in environment
	103	* and it seems Synology did not care to change u-boot
	104	* default configuration in order to allow saving a
	105	* modified environment at a sensible location. So,
	106	* if you do a 'saveenv' under u-boot, your modified
	107	* environment will be saved at 1MB after the start
	108	* of the flash, i.e. in the middle of the uImage.
	109	* For that reason, it is strongly advised not to
	110	* change the default environment, unless you know
	111	* what you are doing.
	112	*/
	113	partition@00000000 { /* u-boot */
	114	label = "RedBoot";
	115	reg = <0x00000000 0x000c0000>; /* 768KB */
	116	};
	117
	118	partition@000c0000 { /* uImage */
	119	label = "zImage";
	120	reg = <0x000c0000 0x002d0000>; /* 2880KB */
	121	};
	122
	123	partition@00390000 { /* uInitramfs */
	124	label = "rd.gz";
	125	reg = <0x00390000 0x00440000>; /* 4250KB */
	126	};
	127
	128	partition@007d0000 { /* MAC address and serial number */
	129	label = "vendor";
	130	reg = <0x007d0000 0x00010000>; /* 64KB */
	131	};
	132
	133	partition@007e0000 {
	134	label = "RedBoot config";
	135	reg = <0x007e0000 0x00010000>; /* 64KB */
	136	};
	137
	138	partition@007f0000 {
	139	label = "FIS directory";
	140	reg = <0x007f0000 0x00010000>; /* 64KB */
	141	};
	142	};
	143	};
	144
	145	i2c@11000 {
	146	compatible = "marvell,mv64xxx-i2c";
	147	pinctrl-0 = <&i2c0_pins>;
	148	pinctrl-names = "default";
	149	clock-frequency = <400000>;
	150	status = "okay";
	151
	152	/* Main device RTC chip */
	153	s35390a: s35390a@30 {
	154	compatible = "sii,s35390a";
	155	reg = <0x30>;
	156	};
	157	};
	158
	159	/* Connected to a header on device's PCB */
160	serial@12000 {
161	status = "okay";
162	};
163
164	/* Connected to a TI MSP430F2111 for power control */
165	serial@12100 {
166	status = "okay";
167	};
168
169	poweroff@12100 {
170	compatible = "synology,power-off";
171	reg = <0x12100 0x100>;
172	clocks = <&coreclk 0>;
173	};
174
175	/* rear USB port, near reset button */
176	usb@50000 {
177	status = "okay";
178	};
179
180	/* rear USB port, near RJ45 port */
181	usb@51000 {
182	status = "okay";
183	};
184
185	mdio {
186	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
187	reg = <1>;
188	};
189	};
190
191	ethernet@70000 {
192	status = "okay";
193	phy = <&phy1>;
194	phy-mode = "sgmii";
195	};
196
197	sata@a0000 {
198	nr-ports = <2>;
199	status = "okay";
200	};
201	};
202	};
203
204	gpio-fan-32-38 {
205	status = "okay";
206	compatible = "gpio-fan";
207	pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
208	&fan_ctrl_high_pin &fan_alarm_pin>;
209	pinctrl-names = "default";
210	gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
211	&gpio2 0 GPIO_ACTIVE_HIGH
212	&gpio2 1 GPIO_ACTIVE_HIGH>;
213	alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
214	gpio-fan,speed-map = < 0 0
215	1000 1
216	1150 2
217	1350 4
218	1500 3
219	1650 5
220	1750 6
221	1900 7 >;
222	};
223
224	gpio-leds {
225	compatible = "gpio-leds";
226	pinctrl-0 = <&disk1_led_pin
227	&disk2_led_pin>;
228	pinctrl-names = "default";
229
230	disk1-led-amber {
231	label = "synology:amber:disk1";
232	gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
233	default-state = "keep";
234	};
235
236	disk2-led-amber {
237	label = "synology:amber:disk2";
238	gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
239	default-state = "keep";
240	};
241	};
242
243	regulators {
244	compatible = "simple-bus";
245	#address-cells = <1>;
246	#size-cells = <0>;
247	pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
248	pinctrl-names = "default";
249
250	sata1_regulator: sata1-regulator {
251	compatible = "regulator-fixed";
252	reg = <1>;
253	regulator-name = "SATA1 Power";
254	regulator-min-microvolt = <5000000>;
255	regulator-max-microvolt = <5000000>;
256	startup-delay-us = <2000000>;
257	enable-active-high;
258	regulator-always-on;
259	regulator-boot-on;
260	gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
261	};
262
263	sata2_regulator: sata2-regulator {
264	compatible = "regulator-fixed";
265	reg = <2>;
266	regulator-name = "SATA2 Power";
267	regulator-min-microvolt = <5000000>;
268	regulator-max-microvolt = <5000000>;
269	startup-delay-us = <4000000>;
270	enable-active-high;
271	regulator-always-on;
272	regulator-boot-on;
273	gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
274	};
275	};
276	};
277
278	&pinctrl {
279	disk1_led_pin: disk1-led-pin {
280	marvell,pins = "mpp31";
281	marvell,function = "gpio";
282	};
283
284	disk2_led_pin: disk2-led-pin {
285	marvell,pins = "mpp32";
286	marvell,function = "gpio";
287	};
288
289	sata1_pwr_pin: sata1-pwr-pin {
290	marvell,pins = "mpp37";
291	marvell,function = "gpio";
292	};
293
294	sata2_pwr_pin: sata2-pwr-pin {
295	marvell,pins = "mpp62";
296	marvell,function = "gpio";
297	};
298
299	sata1_pres_pin: sata1-pres-pin {
300	marvell,pins = "mpp60";
301	marvell,function = "gpio";
302	};
303
304	sata2_pres_pin: sata2-pres-pin {
305	marvell,pins = "mpp48";
306	marvell,function = "gpio";
307	};
308
309	syno_id_bit0_pin: syno-id-bit0-pin {
310	marvell,pins = "mpp55";
311	marvell,function = "gpio";
312	};
313
314	syno_id_bit1_pin: syno-id-bit1-pin {
315	marvell,pins = "mpp56";
316	marvell,function = "gpio";
317	};
318
319	syno_id_bit2_pin: syno-id-bit2-pin {
320	marvell,pins = "mpp57";
321	marvell,function = "gpio";
322	};
323
324	syno_id_bit3_pin: syno-id-bit3-pin {
325	marvell,pins = "mpp58";
326	marvell,function = "gpio";
327	};
328
329	fan_ctrl_low_pin: fan-ctrl-low-pin {
330	marvell,pins = "mpp65";
331	marvell,function = "gpio";
332	};
333
334	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
335	marvell,pins = "mpp64";
336	marvell,function = "gpio";
337	};
338
339	fan_ctrl_high_pin: fan-ctrl-high-pin {
340	marvell,pins = "mpp63";
341	marvell,function = "gpo";
342	};
343
344	fan_alarm_pin: fan-alarm-pin {
345	marvell,pins = "mpp38";
346	marvell,function = "gpio";
347	};
348	};