]>
Commit | Line | Data |
---|---|---|
4c945e85 RK |
1 | /* |
2 | * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828) | |
3 | * | |
4 | * Copyright (C) 2015 Russell King | |
5 | * | |
6 | * This board is in development; the contents of this file work with | |
7 | * the A1 rev 2.0 of the board, which does not represent final | |
8 | * production board. Things will change, don't expect this file to | |
9 | * remain compatible info the future. | |
10 | * | |
11 | * This file is dual-licensed: you can use it either under the terms | |
12 | * of the GPL or the X11 license, at your option. Note that this dual | |
13 | * licensing only applies to this file, and not this project as a | |
14 | * whole. | |
15 | * | |
16 | * a) This file is free software; you can redistribute it and/or | |
17 | * modify it under the terms of the GNU General Public License | |
18 | * version 2 as published by the Free Software Foundation. | |
19 | * | |
20 | * This file is distributed in the hope that it will be useful | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * Or, alternatively | |
26 | * | |
27 | * b) Permission is hereby granted, free of charge, to any person | |
28 | * obtaining a copy of this software and associated documentation | |
29 | * files (the "Software"), to deal in the Software without | |
30 | * restriction, including without limitation the rights to use | |
31 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
32 | * sell copies of the Software, and to permit persons to whom the | |
33 | * Software is furnished to do so, subject to the following | |
34 | * conditions: | |
35 | * | |
36 | * The above copyright notice and this permission notice shall be | |
37 | * included in all copies or substantial portions of the Software. | |
38 | * | |
39 | * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND | |
40 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
41 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
42 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
43 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY | |
44 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
45 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
46 | * OTHER DEALINGS IN THE SOFTWARE. | |
47 | */ | |
48 | ||
49 | /dts-v1/; | |
50 | #include "armada-388.dtsi" | |
51 | #include "armada-38x-solidrun-microsom.dtsi" | |
52 | ||
53 | / { | |
54 | model = "SolidRun Clearfog A1"; | |
55 | compatible = "solidrun,clearfog-a1", "marvell,armada388", | |
56 | "marvell,armada385", "marvell,armada380"; | |
57 | ||
58 | aliases { | |
59 | /* So that mvebu u-boot can update the MAC addresses */ | |
60 | ethernet1 = ð0; | |
61 | ethernet2 = ð1; | |
62 | ethernet3 = ð2; | |
63 | }; | |
64 | ||
65 | chosen { | |
66 | stdout-path = "serial0:115200n8"; | |
67 | }; | |
68 | ||
69 | reg_3p3v: regulator-3p3v { | |
70 | compatible = "regulator-fixed"; | |
71 | regulator-name = "3P3V"; | |
72 | regulator-min-microvolt = <3300000>; | |
73 | regulator-max-microvolt = <3300000>; | |
74 | regulator-always-on; | |
75 | }; | |
76 | ||
77 | soc { | |
78 | internal-regs { | |
79 | ethernet@30000 { | |
80 | phy-mode = "sgmii"; | |
c49e99c2 MW |
81 | buffer-manager = <&bm>; |
82 | bm,pool-long = <2>; | |
83 | bm,pool-short = <1>; | |
4c945e85 RK |
84 | status = "okay"; |
85 | ||
86 | fixed-link { | |
87 | speed = <1000>; | |
88 | full-duplex; | |
89 | }; | |
90 | }; | |
91 | ||
92 | ethernet@34000 { | |
93 | phy-mode = "sgmii"; | |
c49e99c2 MW |
94 | buffer-manager = <&bm>; |
95 | bm,pool-long = <3>; | |
96 | bm,pool-short = <1>; | |
4c945e85 RK |
97 | status = "okay"; |
98 | ||
99 | fixed-link { | |
100 | speed = <1000>; | |
101 | full-duplex; | |
102 | }; | |
103 | }; | |
104 | ||
105 | i2c@11000 { | |
106 | /* Is there anything on this? */ | |
107 | clock-frequency = <100000>; | |
108 | pinctrl-0 = <&i2c0_pins>; | |
109 | pinctrl-names = "default"; | |
110 | status = "okay"; | |
111 | ||
112 | /* | |
113 | * PCA9655 GPIO expander, up to 1MHz clock. | |
114 | * 0-CON3 CLKREQ# | |
115 | * 1-CON3 PERST# | |
116 | * 2-CON2 PERST# | |
117 | * 3-CON3 W_DISABLE | |
118 | * 4-CON2 CLKREQ# | |
119 | * 5-USB3 overcurrent | |
120 | * 6-USB3 power | |
121 | * 7-CON2 W_DISABLE | |
122 | * 8-JP4 P1 | |
123 | * 9-JP4 P4 | |
124 | * 10-JP4 P5 | |
125 | * 11-m.2 DEVSLP | |
126 | * 12-SFP_LOS | |
127 | * 13-SFP_TX_FAULT | |
128 | * 14-SFP_TX_DISABLE | |
129 | * 15-SFP_MOD_DEF0 | |
130 | */ | |
131 | expander0: gpio-expander@20 { | |
132 | /* | |
133 | * This is how it should be: | |
134 | * compatible = "onnn,pca9655", | |
135 | * "nxp,pca9555"; | |
136 | * but you can't do this because of | |
137 | * the way I2C works. | |
138 | */ | |
139 | compatible = "nxp,pca9555"; | |
140 | gpio-controller; | |
141 | #gpio-cells = <2>; | |
142 | reg = <0x20>; | |
143 | ||
144 | pcie1_0_clkreq { | |
145 | gpio-hog; | |
146 | gpios = <0 GPIO_ACTIVE_LOW>; | |
147 | input; | |
148 | line-name = "pcie1.0-clkreq"; | |
149 | }; | |
150 | pcie1_0_w_disable { | |
151 | gpio-hog; | |
152 | gpios = <3 GPIO_ACTIVE_LOW>; | |
153 | output-low; | |
154 | line-name = "pcie1.0-w-disable"; | |
155 | }; | |
156 | pcie2_0_clkreq { | |
157 | gpio-hog; | |
158 | gpios = <4 GPIO_ACTIVE_LOW>; | |
159 | input; | |
160 | line-name = "pcie2.0-clkreq"; | |
161 | }; | |
162 | pcie2_0_w_disable { | |
163 | gpio-hog; | |
164 | gpios = <7 GPIO_ACTIVE_LOW>; | |
165 | output-low; | |
166 | line-name = "pcie2.0-w-disable"; | |
167 | }; | |
168 | usb3_ilimit { | |
169 | gpio-hog; | |
170 | gpios = <5 GPIO_ACTIVE_LOW>; | |
171 | input; | |
172 | line-name = "usb3-current-limit"; | |
173 | }; | |
174 | usb3_power { | |
175 | gpio-hog; | |
176 | gpios = <6 GPIO_ACTIVE_HIGH>; | |
177 | output-high; | |
178 | line-name = "usb3-power"; | |
179 | }; | |
180 | m2_devslp { | |
181 | gpio-hog; | |
182 | gpios = <11 GPIO_ACTIVE_HIGH>; | |
183 | output-low; | |
184 | line-name = "m.2 devslp"; | |
185 | }; | |
186 | sfp_los { | |
187 | /* SFP loss of signal */ | |
188 | gpio-hog; | |
189 | gpios = <12 GPIO_ACTIVE_HIGH>; | |
190 | input; | |
191 | line-name = "sfp-los"; | |
192 | }; | |
193 | sfp_tx_fault { | |
194 | /* SFP laser fault */ | |
195 | gpio-hog; | |
196 | gpios = <13 GPIO_ACTIVE_HIGH>; | |
197 | input; | |
198 | line-name = "sfp-tx-fault"; | |
199 | }; | |
200 | sfp_tx_disable { | |
201 | /* SFP transmit disable */ | |
202 | gpio-hog; | |
203 | gpios = <14 GPIO_ACTIVE_HIGH>; | |
204 | output-low; | |
205 | line-name = "sfp-tx-disable"; | |
206 | }; | |
207 | sfp_mod_def0 { | |
208 | /* SFP module present */ | |
209 | gpio-hog; | |
210 | gpios = <15 GPIO_ACTIVE_LOW>; | |
211 | input; | |
212 | line-name = "sfp-mod-def0"; | |
213 | }; | |
214 | }; | |
215 | ||
216 | /* The MCP3021 is 100kHz clock only */ | |
217 | mikrobus_adc: mcp3021@4c { | |
218 | compatible = "microchip,mcp3021"; | |
219 | reg = <0x4c>; | |
220 | }; | |
221 | ||
222 | /* Also something at 0x64 */ | |
223 | }; | |
224 | ||
225 | i2c@11100 { | |
226 | /* | |
227 | * Routed to SFP, mikrobus, and PCIe. | |
228 | * SFP limits this to 100kHz, and requires | |
229 | * an AT24C01A/02/04 with address pins tied | |
230 | * low, which takes addresses 0x50 and 0x51. | |
231 | * Mikrobus doesn't specify beyond an I2C | |
232 | * bus being present. | |
233 | * PCIe uses ARP to assign addresses, or | |
234 | * 0x63-0x64. | |
235 | */ | |
236 | clock-frequency = <100000>; | |
237 | pinctrl-0 = <&clearfog_i2c1_pins>; | |
238 | pinctrl-names = "default"; | |
239 | status = "okay"; | |
240 | }; | |
241 | ||
4c945e85 RK |
242 | pinctrl@18000 { |
243 | clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { | |
244 | marvell,pins = "mpp46"; | |
245 | marvell,function = "ref"; | |
246 | }; | |
247 | clearfog_dsa0_pins: clearfog-dsa0-pins { | |
248 | marvell,pins = "mpp23", "mpp41"; | |
249 | marvell,function = "gpio"; | |
250 | }; | |
251 | clearfog_i2c1_pins: i2c1-pins { | |
252 | /* SFP, PCIe, mSATA, mikrobus */ | |
253 | marvell,pins = "mpp26", "mpp27"; | |
254 | marvell,function = "i2c1"; | |
255 | }; | |
256 | clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { | |
257 | marvell,pins = "mpp20"; | |
258 | marvell,function = "gpio"; | |
259 | }; | |
260 | clearfog_sdhci_pins: clearfog-sdhci-pins { | |
261 | marvell,pins = "mpp21", "mpp28", | |
262 | "mpp37", "mpp38", | |
263 | "mpp39", "mpp40"; | |
264 | marvell,function = "sd0"; | |
265 | }; | |
266 | clearfog_spi1_cs_pins: spi1-cs-pins { | |
267 | marvell,pins = "mpp55"; | |
268 | marvell,function = "spi1"; | |
269 | }; | |
270 | mikro_pins: mikro-pins { | |
271 | /* int: mpp22 rst: mpp29 */ | |
272 | marvell,pins = "mpp22", "mpp29"; | |
273 | marvell,function = "gpio"; | |
274 | }; | |
275 | mikro_spi_pins: mikro-spi-pins { | |
276 | marvell,pins = "mpp43"; | |
277 | marvell,function = "spi1"; | |
278 | }; | |
279 | mikro_uart_pins: mikro-uart-pins { | |
280 | marvell,pins = "mpp24", "mpp25"; | |
281 | marvell,function = "ua1"; | |
282 | }; | |
283 | rear_button_pins: rear-button-pins { | |
284 | marvell,pins = "mpp34"; | |
285 | marvell,function = "gpio"; | |
286 | }; | |
287 | }; | |
288 | ||
289 | sata@a8000 { | |
290 | /* pinctrl? */ | |
291 | status = "okay"; | |
292 | }; | |
293 | ||
294 | sata@e0000 { | |
295 | /* pinctrl? */ | |
296 | status = "okay"; | |
297 | }; | |
298 | ||
299 | sdhci@d8000 { | |
300 | bus-width = <4>; | |
301 | cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; | |
302 | no-1-8-v; | |
303 | pinctrl-0 = <&clearfog_sdhci_pins | |
304 | &clearfog_sdhci_cd_pins>; | |
305 | pinctrl-names = "default"; | |
306 | status = "okay"; | |
307 | vmmc = <®_3p3v>; | |
308 | wp-inverted; | |
309 | }; | |
310 | ||
311 | serial@12100 { | |
312 | /* mikrobus uart */ | |
313 | pinctrl-0 = <&mikro_uart_pins>; | |
314 | pinctrl-names = "default"; | |
315 | status = "okay"; | |
316 | }; | |
317 | ||
4c945e85 RK |
318 | usb@58000 { |
319 | /* CON3, nearest power. */ | |
320 | status = "okay"; | |
321 | }; | |
322 | ||
323 | usb3@f0000 { | |
324 | /* CON2, nearest CPU, USB2 only. */ | |
325 | status = "okay"; | |
326 | }; | |
327 | ||
328 | usb3@f8000 { | |
329 | /* CON7 */ | |
330 | status = "okay"; | |
331 | }; | |
332 | }; | |
333 | ||
334 | pcie-controller { | |
335 | status = "okay"; | |
336 | /* | |
337 | * The two PCIe units are accessible through | |
338 | * the mini-PCIe connectors on the board. | |
339 | */ | |
340 | pcie@2,0 { | |
341 | /* Port 1, Lane 0. CON3, nearest power. */ | |
342 | reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; | |
343 | status = "okay"; | |
344 | }; | |
345 | pcie@3,0 { | |
346 | /* Port 2, Lane 0. CON2, nearest CPU. */ | |
347 | reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; | |
348 | status = "okay"; | |
349 | }; | |
350 | }; | |
351 | }; | |
352 | ||
353 | dsa@0 { | |
354 | compatible = "marvell,dsa"; | |
355 | dsa,ethernet = <ð1>; | |
356 | dsa,mii-bus = <&mdio>; | |
357 | pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; | |
358 | pinctrl-names = "default"; | |
359 | #address-cells = <2>; | |
360 | #size-cells = <0>; | |
361 | ||
362 | switch@0 { | |
363 | #address-cells = <1>; | |
364 | #size-cells = <0>; | |
365 | reg = <4 0>; | |
366 | ||
367 | port@0 { | |
368 | reg = <0>; | |
d9fd3c91 | 369 | label = "lan5"; |
4c945e85 RK |
370 | }; |
371 | ||
372 | port@1 { | |
373 | reg = <1>; | |
d9fd3c91 | 374 | label = "lan4"; |
4c945e85 RK |
375 | }; |
376 | ||
377 | port@2 { | |
378 | reg = <2>; | |
379 | label = "lan3"; | |
380 | }; | |
381 | ||
382 | port@3 { | |
383 | reg = <3>; | |
d9fd3c91 | 384 | label = "lan2"; |
4c945e85 RK |
385 | }; |
386 | ||
387 | port@4 { | |
388 | reg = <4>; | |
d9fd3c91 | 389 | label = "lan1"; |
4c945e85 RK |
390 | }; |
391 | ||
392 | port@5 { | |
393 | reg = <5>; | |
394 | label = "cpu"; | |
395 | }; | |
396 | ||
397 | port@6 { | |
398 | /* 88E1512 external phy */ | |
399 | reg = <6>; | |
400 | label = "lan6"; | |
401 | fixed-link { | |
402 | speed = <1000>; | |
403 | full-duplex; | |
404 | }; | |
405 | }; | |
406 | }; | |
407 | }; | |
408 | ||
409 | gpio-keys { | |
410 | compatible = "gpio-keys"; | |
411 | pinctrl-0 = <&rear_button_pins>; | |
412 | pinctrl-names = "default"; | |
413 | ||
414 | button_0 { | |
415 | /* The rear SW3 button */ | |
416 | label = "Rear Button"; | |
417 | gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; | |
418 | linux,can-disable; | |
419 | linux,code = <BTN_0>; | |
420 | }; | |
421 | }; | |
422 | }; | |
0160a4b6 SR |
423 | |
424 | &spi1 { | |
425 | /* | |
426 | * We don't seem to have the W25Q32 on the | |
427 | * A1 Rev 2.0 boards, so disable SPI. | |
428 | * CS0: W25Q32 (doesn't appear to be present) | |
429 | * CS1: | |
430 | * CS2: mikrobus | |
431 | */ | |
432 | pinctrl-0 = <&spi1_pins | |
433 | &clearfog_spi1_cs_pins | |
434 | &mikro_spi_pins>; | |
435 | pinctrl-names = "default"; | |
436 | status = "okay"; | |
437 | ||
438 | spi-flash@0 { | |
439 | #address-cells = <1>; | |
440 | #size-cells = <0>; | |
441 | compatible = "w25q32", "jedec,spi-nor"; | |
442 | reg = <0>; /* Chip select 0 */ | |
443 | spi-max-frequency = <3000000>; | |
444 | status = "disabled"; | |
445 | }; | |
446 | }; |