]>
Commit | Line | Data |
---|---|---|
ca36855e | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
8aa0b019 AE |
2 | /* |
3 | * Device Tree file for NETGEAR ReadyNAS 2120 | |
4 | * | |
5 | * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> | |
8aa0b019 AE |
6 | */ |
7 | ||
8 | /dts-v1/; | |
9 | ||
10 | #include <dt-bindings/input/input.h> | |
11 | #include <dt-bindings/gpio/gpio.h> | |
12 | #include "armada-xp-mv78230.dtsi" | |
13 | ||
14 | / { | |
15 | model = "NETGEAR ReadyNAS 2120"; | |
16 | compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; | |
17 | ||
18 | chosen { | |
9552203c | 19 | stdout-path = "serial0:115200n8"; |
8aa0b019 AE |
20 | }; |
21 | ||
6f477f43 | 22 | memory@0 { |
8aa0b019 AE |
23 | device_type = "memory"; |
24 | reg = <0 0x00000000 0 0x80000000>; /* 2GB */ | |
25 | }; | |
26 | ||
27 | soc { | |
28 | ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 | |
c466d997 | 29 | MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 |
d7d5a43c TP |
30 | MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 |
31 | MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; | |
8aa0b019 | 32 | |
8aa0b019 | 33 | internal-regs { |
784693de AE |
34 | |
35 | /* RTC is provided by Intersil ISL12057 I2C RTC chip */ | |
36 | rtc@10300 { | |
37 | status = "disabled"; | |
38 | }; | |
39 | ||
8aa0b019 | 40 | i2c@11000 { |
8aa0b019 AE |
41 | clock-frequency = <400000>; |
42 | status = "okay"; | |
43 | ||
44 | /* Controller for rear fan #1 of 3 (Protechnic | |
45 | * MGT4012XB-O20, 8000RPM) near eSATA port */ | |
46 | g762_fan1: g762@3e { | |
47 | compatible = "gmt,g762"; | |
48 | reg = <0x3e>; | |
49 | clocks = <&g762_clk>; /* input clock */ | |
50 | fan_gear_mode = <0>; | |
51 | fan_startv = <1>; | |
52 | pwm_polarity = <0>; | |
53 | }; | |
54 | ||
55 | /* Controller for rear (center) fan #2 of 3 */ | |
56 | g762_fan2: g762@48 { | |
57 | compatible = "gmt,g762"; | |
58 | reg = <0x48>; | |
59 | clocks = <&g762_clk>; /* input clock */ | |
60 | fan_gear_mode = <0>; | |
61 | fan_startv = <1>; | |
62 | pwm_polarity = <0>; | |
63 | }; | |
64 | ||
65 | /* Controller for rear fan #3 of 3 */ | |
66 | g762_fan3: g762@49 { | |
67 | compatible = "gmt,g762"; | |
68 | reg = <0x49>; | |
69 | clocks = <&g762_clk>; /* input clock */ | |
70 | fan_gear_mode = <0>; | |
71 | fan_startv = <1>; | |
72 | pwm_polarity = <0>; | |
73 | }; | |
74 | ||
75 | /* Temperature sensor */ | |
76 | g751: g751@4c { | |
77 | compatible = "gmt,g751"; | |
78 | reg = <0x4c>; | |
79 | }; | |
2b63821e | 80 | |
bd1de6a3 | 81 | isl12057: rtc@68 { |
2b63821e AE |
82 | compatible = "isil,isl12057"; |
83 | reg = <0x68>; | |
8b44f5be | 84 | wakeup-source; |
2b63821e AE |
85 | }; |
86 | }; | |
87 | ||
88 | serial@12000 { | |
89 | status = "okay"; | |
90 | }; | |
91 | ||
92 | /* Front USB 2.0 port */ | |
93 | usb@50000 { | |
94 | status = "okay"; | |
95 | }; | |
96 | ||
2b63821e | 97 | ethernet@70000 { |
ae6f0020 UKK |
98 | pinctrl-0 = <&ge0_rgmii_pins>; |
99 | pinctrl-names = "default"; | |
100 | ||
2b63821e AE |
101 | status = "okay"; |
102 | phy = <&phy0>; | |
103 | phy-mode = "rgmii-id"; | |
104 | }; | |
105 | ||
106 | ethernet@74000 { | |
ae6f0020 UKK |
107 | pinctrl-0 = <&ge1_rgmii_pins>; |
108 | pinctrl-names = "default"; | |
109 | ||
2b63821e AE |
110 | status = "okay"; |
111 | phy = <&phy1>; | |
112 | phy-mode = "rgmii-id"; | |
113 | }; | |
114 | ||
115 | /* Two rear eSATA ports */ | |
116 | sata@a0000 { | |
117 | nr-ports = <2>; | |
118 | status = "okay"; | |
8aa0b019 AE |
119 | }; |
120 | }; | |
121 | }; | |
122 | ||
123 | clocks { | |
124 | g762_clk: g762-oscillator { | |
125 | compatible = "fixed-clock"; | |
126 | #clock-cells = <0>; | |
127 | clock-frequency = <32768>; | |
128 | }; | |
129 | }; | |
130 | ||
131 | gpio-leds { | |
132 | compatible = "gpio-leds"; | |
133 | pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin | |
134 | &sata3_led_pin &sata4_led_pin>; | |
135 | pinctrl-names = "default"; | |
136 | ||
137 | red-sata1-led { | |
138 | label = "rn2120:red:sata1"; | |
139 | gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; | |
140 | default-state = "off"; | |
141 | }; | |
142 | ||
143 | red-sata2-led { | |
144 | label = "rn2120:red:sata2"; | |
145 | gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; | |
146 | default-state = "off"; | |
147 | }; | |
148 | ||
149 | red-sata3-led { | |
150 | label = "rn2120:red:sata3"; | |
151 | gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; | |
152 | default-state = "off"; | |
153 | }; | |
154 | ||
155 | red-sata4-led { | |
156 | label = "rn2120:red:sata4"; | |
157 | gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; | |
158 | default-state = "off"; | |
159 | }; | |
160 | ||
161 | red-err-led { | |
162 | label = "rn2120:red:err"; | |
163 | gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; | |
164 | default-state = "off"; | |
165 | }; | |
166 | }; | |
167 | ||
168 | gpio-keys { | |
169 | compatible = "gpio-keys"; | |
170 | pinctrl-0 = <&power_button_pin &reset_button_pin>; | |
171 | pinctrl-names = "default"; | |
172 | ||
173 | power-button { | |
174 | label = "Power Button"; | |
175 | linux,code = <KEY_POWER>; | |
176 | gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; | |
177 | }; | |
178 | ||
179 | reset-button { | |
180 | label = "Reset Button"; | |
181 | linux,code = <KEY_RESTART>; | |
182 | gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; | |
183 | }; | |
184 | }; | |
185 | ||
186 | gpio-poweroff { | |
187 | compatible = "gpio-poweroff"; | |
188 | pinctrl-0 = <&poweroff>; | |
189 | pinctrl-names = "default"; | |
190 | gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; | |
191 | }; | |
192 | }; | |
01c43422 | 193 | |
007d05d8 GC |
194 | &pciec { |
195 | status = "okay"; | |
196 | ||
197 | /* Connected to first Marvell 88SE9170 SATA controller */ | |
198 | pcie@1,0 { | |
199 | /* Port 0, Lane 0 */ | |
200 | status = "okay"; | |
201 | }; | |
202 | ||
203 | /* Connected to second Marvell 88SE9170 SATA controller */ | |
204 | pcie@2,0 { | |
205 | /* Port 0, Lane 1 */ | |
206 | status = "okay"; | |
207 | }; | |
208 | ||
209 | /* Connected to Fresco Logic FL1009 USB 3.0 controller */ | |
210 | pcie@5,0 { | |
211 | /* Port 1, Lane 0 */ | |
212 | status = "okay"; | |
213 | }; | |
214 | }; | |
215 | ||
1fc21295 GC |
216 | &mdio { |
217 | phy0: ethernet-phy@0 { /* Marvell 88E1318 */ | |
218 | reg = <0>; | |
219 | }; | |
220 | ||
221 | phy1: ethernet-phy@1 { /* Marvell 88E1318 */ | |
222 | reg = <1>; | |
223 | }; | |
224 | }; | |
225 | ||
226 | ||
01c43422 SH |
227 | &pinctrl { |
228 | poweroff: poweroff { | |
229 | marvell,pins = "mpp42"; | |
230 | marvell,function = "gpio"; | |
231 | }; | |
232 | ||
233 | power_button_pin: power-button-pin { | |
234 | marvell,pins = "mpp27"; | |
235 | marvell,function = "gpio"; | |
236 | }; | |
237 | ||
238 | reset_button_pin: reset-button-pin { | |
239 | marvell,pins = "mpp41"; | |
240 | marvell,function = "gpio"; | |
241 | }; | |
242 | ||
243 | sata1_led_pin: sata1-led-pin { | |
244 | marvell,pins = "mpp31"; | |
245 | marvell,function = "gpio"; | |
246 | }; | |
247 | ||
248 | sata2_led_pin: sata2-led-pin { | |
249 | marvell,pins = "mpp40"; | |
250 | marvell,function = "gpio"; | |
251 | }; | |
252 | ||
253 | sata3_led_pin: sata3-led-pin { | |
254 | marvell,pins = "mpp44"; | |
255 | marvell,function = "gpio"; | |
256 | }; | |
257 | ||
258 | sata4_led_pin: sata4-led-pin { | |
259 | marvell,pins = "mpp47"; | |
260 | marvell,function = "gpio"; | |
261 | }; | |
262 | ||
263 | sata1_power_pin: sata1-power-pin { | |
264 | marvell,pins = "mpp24"; | |
265 | marvell,function = "gpio"; | |
266 | }; | |
267 | ||
268 | sata2_power_pin: sata2-power-pin { | |
269 | marvell,pins = "mpp25"; | |
270 | marvell,function = "gpio"; | |
271 | }; | |
272 | ||
273 | sata3_power_pin: sata3-power-pin { | |
274 | marvell,pins = "mpp26"; | |
275 | marvell,function = "gpio"; | |
276 | }; | |
277 | ||
278 | sata4_power_pin: sata4-power-pin { | |
279 | marvell,pins = "mpp28"; | |
280 | marvell,function = "gpio"; | |
281 | }; | |
282 | ||
283 | sata1_pres_pin: sata1-pres-pin { | |
284 | marvell,pins = "mpp32"; | |
285 | marvell,function = "gpio"; | |
286 | }; | |
287 | ||
288 | sata2_pres_pin: sata2-pres-pin { | |
289 | marvell,pins = "mpp33"; | |
290 | marvell,function = "gpio"; | |
291 | }; | |
292 | ||
293 | sata3_pres_pin: sata3-pres-pin { | |
294 | marvell,pins = "mpp34"; | |
295 | marvell,function = "gpio"; | |
296 | }; | |
297 | ||
298 | sata4_pres_pin: sata4-pres-pin { | |
299 | marvell,pins = "mpp35"; | |
300 | marvell,function = "gpio"; | |
301 | }; | |
302 | ||
303 | err_led_pin: err-led-pin { | |
304 | marvell,pins = "mpp45"; | |
305 | marvell,function = "gpio"; | |
306 | }; | |
307 | }; | |
3b799199 MR |
308 | |
309 | &nand_controller { | |
310 | status = "okay"; | |
311 | ||
312 | nand@0 { | |
313 | reg = <0>; | |
314 | label = "pxa3xx_nand-0"; | |
315 | nand-rb = <0>; | |
316 | marvell,nand-keep-config; | |
317 | nand-on-flash-bbt; | |
318 | ||
319 | /* Use Hardware BCH ECC */ | |
320 | nand-ecc-strength = <4>; | |
321 | nand-ecc-step-size = <512>; | |
322 | ||
323 | partitions { | |
324 | compatible = "fixed-partitions"; | |
325 | #address-cells = <1>; | |
326 | #size-cells = <1>; | |
327 | ||
328 | partition@0 { | |
329 | label = "u-boot"; | |
330 | reg = <0x0000000 0x180000>; /* 1.5MB */ | |
331 | read-only; | |
332 | }; | |
333 | ||
334 | partition@180000 { | |
335 | label = "u-boot-env"; | |
336 | reg = <0x180000 0x20000>; /* 128KB */ | |
337 | read-only; | |
338 | }; | |
339 | ||
340 | partition@200000 { | |
341 | label = "uImage"; | |
342 | reg = <0x0200000 0x600000>; /* 6MB */ | |
343 | }; | |
344 | ||
345 | partition@800000 { | |
346 | label = "minirootfs"; | |
347 | reg = <0x0800000 0x400000>; /* 4MB */ | |
348 | }; | |
349 | ||
350 | /* Last MB is for the BBT, i.e. not writable */ | |
351 | partition@c00000 { | |
352 | label = "ubifs"; | |
353 | reg = <0x0c00000 0x7400000>; /* 116MB */ | |
354 | }; | |
355 | }; | |
356 | }; | |
357 | }; |