[mirror_ubuntu-hirsute-kernel.git] / arch / arm / boot / dts / at91-sama5d3_xplained.dts

/*
 * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
 *
 *  Copyright (C) 2014 Atmel,
 *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
 *
 * Licensed under GPLv2 or later.
 */
/dts-v1/;
#include "sama5d36.dtsi"

/ {
	model = "SAMA5D3 Xplained";
	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory {
		reg = <0x20000000 0x10000000>;
	};

	clocks {
		slow_xtal {
			clock-frequency = <32768>;
		};

		main_xtal {
			clock-frequency = <12000000>;
		};
	};

	ahb {
		apb {
			mmc0: mmc@f0000000 {
				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
				vmmc-supply = <&vcc_mmc0_reg>;
				vqmmc-supply = <&vcc_3v3_reg>;
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <8>;
					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
				};
			};

			mmc1: mmc@f8000000 {
				vmmc-supply = <&vcc_3v3_reg>;
				vqmmc-supply = <&vcc_3v3_reg>;
				status = "disabled";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
				};
			};

			spi0: spi@f0004000 {
				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
				status = "okay";
			};

			can0: can@f000c000 {
				status = "okay";
			};

			i2c0: i2c@f0014000 {
				pinctrl-0 = <&pinctrl_i2c0_pu>;
				status = "okay";
			};

			i2c1: i2c@f0018000 {
				status = "okay";

				pmic: act8865@5b {
					compatible = "active-semi,act8865";
					reg = <0x5b>;
					status = "disabled";

					regulators {
						vcc_1v8_reg: DCDC_REG1 {
							regulator-name = "VCC_1V8";
							regulator-min-microvolt = <1800000>;
							regulator-max-microvolt = <1800000>;
							regulator-always-on;
						};

						vcc_1v2_reg: DCDC_REG2 {
							regulator-name = "VCC_1V2";
							regulator-min-microvolt = <1200000>;
							regulator-max-microvolt = <1200000>;
							regulator-always-on;
						};

						vcc_3v3_reg: DCDC_REG3 {
							regulator-name = "VCC_3V3";
							regulator-min-microvolt = <3300000>;
							regulator-max-microvolt = <3300000>;
							regulator-always-on;
						};

						vddfuse_reg: LDO_REG1 {
							regulator-name = "FUSE_2V5";
							regulator-min-microvolt = <2500000>;
							regulator-max-microvolt = <2500000>;
						};

						vddana_reg: LDO_REG2 {
							regulator-name = "VDDANA";
							regulator-min-microvolt = <3300000>;
							regulator-max-microvolt = <3300000>;
							regulator-always-on;
						};
					};
				};
			};

			macb0: ethernet@f0028000 {
				phy-mode = "rgmii";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "okay";

				ethernet-phy@7 {
					reg = <0x7>;
				};
			};

			pwm0: pwm@f002c000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
				status = "okay";
			};

			usart0: serial@f001c000 {
				status = "okay";
			};

			usart1: serial@f0020000 {
				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
				status = "okay";
			};

			uart0: serial@f0024000 {
				status = "okay";
			};

			mmc1: mmc@f8000000 {
				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
				};
			};

			spi1: spi@f8008000 {
				cs-gpios = <&pioC 25 0>;
				status = "okay";
			};

			adc0: adc@f8018000 {
				pinctrl-0 = <
					&pinctrl_adc0_adtrg
					&pinctrl_adc0_ad0
					&pinctrl_adc0_ad1
					&pinctrl_adc0_ad2
					&pinctrl_adc0_ad3
					&pinctrl_adc0_ad4
					&pinctrl_adc0_ad5
					&pinctrl_adc0_ad6
					&pinctrl_adc0_ad7
					&pinctrl_adc0_ad8
					&pinctrl_adc0_ad9
					>;
				status = "okay";
			};

			i2c2: i2c@f801c000 {
				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
				pinctrl-0 = <&pinctrl_i2c2_pu>;
				status = "okay";
			};

			macb1: ethernet@f802c000 {
				phy-mode = "rmii";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "okay";

				ethernet-phy@1 {
					reg = <0x1>;
				};
			};

			dbgu: serial@ffffee00 {
				status = "okay";
			};

			pinctrl@fffff200 {
				board {
					pinctrl_i2c0_pu: i2c0_pu {
						atmel,pins =
							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
					};

					pinctrl_i2c2_pu: i2c2_pu {
						atmel,pins =
							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
					};

					pinctrl_key_gpio: key_gpio_0 {
						atmel,pins =
							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
					};

					pinctrl_mmc0_cd: mmc0_cd {
						atmel,pins =
							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
					};

					pinctrl_mmc1_cd: mmc1_cd {
						atmel,pins =
							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
					};

					pinctrl_usba_vbus: usba_vbus {
						atmel,pins =
							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
					};
				};
			};
		};

		nand0: nand@60000000 {
			nand-bus-width = <8>;
			nand-ecc-mode = "hw";
			atmel,has-pmecc;
			atmel,pmecc-cap = <4>;
			atmel,pmecc-sector-size = <512>;
			nand-on-flash-bbt;
			status = "okay";

			at91bootstrap@0 {
				label = "at91bootstrap";
				reg = <0x0 0x40000>;
			};

			bootloader@40000 {
				label = "bootloader";
				reg = <0x40000 0x80000>;
			};

			bootloaderenv@c0000 {
				label = "bootloader env";
				reg = <0xc0000 0xc0000>;
			};

			dtb@180000 {
				label = "device tree";
				reg = <0x180000 0x80000>;
			};

			kernel@200000 {
				label = "kernel";
				reg = <0x200000 0x600000>;
			};

			rootfs@800000 {
				label = "rootfs";
				reg = <0x800000 0x0f800000>;
			};
		};

		usb0: gadget@00500000 {
			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_usba_vbus>;
			status = "okay";
		};

		usb1: ohci@00600000 {
			num-ports = <3>;
			atmel,vbus-gpio = <0
					   &pioE 3 GPIO_ACTIVE_LOW
					   &pioE 4 GPIO_ACTIVE_LOW
					  >;
			status = "okay";
		};

		usb2: ehci@00700000 {
			status = "okay";
		};
	};

	vcc_mmc0_reg: fixedregulator@0 {
		compatible = "regulator-fixed";
		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
		regulator-name = "mmc0-card-supply";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	gpio_keys {
		compatible = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_key_gpio>;

		bp3 {
			label = "PB_USER";
			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
			linux,code = <0x104>;
			wakeup-source;
		};
	};

	leds {
		compatible = "gpio-leds";

		d2 {
			label = "d2";
			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
			linux,default-trigger = "heartbeat";
		};

		d3 {
			label = "d3";
			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
		};
	};
};
Commit	Line	Data
b7c2b615 NF	1	/*
	2	* at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
	3	*
	4	* Copyright (C) 2014 Atmel,
	5	* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
	6	*
	7	* Licensed under GPLv2 or later.
	8	*/
	9	/dts-v1/;
	10	#include "sama5d36.dtsi"
	11
	12	/ {
	13	model = "SAMA5D3 Xplained";
	14	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
	15
	16	chosen {
a08545db	17	stdout-path = "serial0:115200n8";
b7c2b615 NF	18	};
	19
	20	memory {
	21	reg = <0x20000000 0x10000000>;
	22	};
	23
334394c0 AB	24	clocks {
	25	slow_xtal {
	26	clock-frequency = <32768>;
	27	};
58a5c3d8	28
334394c0 AB	29	main_xtal {
	30	clock-frequency = <12000000>;
	31	};
58a5c3d8 BB	32	};
58a5c3d8 BB	33
b7c2b615 NF	34	ahb {
	35	apb {
	36	mmc0: mmc@f0000000 {
	37	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
1b53e341	38	vmmc-supply = <&vcc_mmc0_reg>;
ed8d177b	39	vqmmc-supply = <&vcc_3v3_reg>;
b7c2b615 NF	40	status = "okay";
	41	slot@0 {
	42	reg = <0>;
	43	bus-width = <8>;
	44	cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
	45	};
	46	};
	47
6f4728c5 BD	48	mmc1: mmc@f8000000 {
	49	vmmc-supply = <&vcc_3v3_reg>;
	50	vqmmc-supply = <&vcc_3v3_reg>;
	51	status = "disabled";
	52	slot@0 {
	53	reg = <0>;
	54	bus-width = <4>;
	55	cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
	56	};
	57	};
	58
b7c2b615	59	spi0: spi@f0004000 {
d44db494	60	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
b7c2b615 NF	61	status = "okay";
	62	};
	63
	64	can0: can@f000c000 {
	65	status = "okay";
	66	};
	67
	68	i2c0: i2c@f0014000 {
a3b8a7c7	69	pinctrl-0 = <&pinctrl_i2c0_pu>;
b7c2b615 NF	70	status = "okay";
	71	};
	72
	73	i2c1: i2c@f0018000 {
	74	status = "okay";
a93f9c88 WY	75
	76	pmic: act8865@5b {
	77	compatible = "active-semi,act8865";
	78	reg = <0x5b>;
19146e7e	79	status = "disabled";
a93f9c88 WY	80
	81	regulators {
	82	vcc_1v8_reg: DCDC_REG1 {
	83	regulator-name = "VCC_1V8";
	84	regulator-min-microvolt = <1800000>;
	85	regulator-max-microvolt = <1800000>;
	86	regulator-always-on;
	87	};
	88
	89	vcc_1v2_reg: DCDC_REG2 {
	90	regulator-name = "VCC_1V2";
	91	regulator-min-microvolt = <1200000>;
	92	regulator-max-microvolt = <1200000>;
	93	regulator-always-on;
	94	};
	95
	96	vcc_3v3_reg: DCDC_REG3 {
	97	regulator-name = "VCC_3V3";
	98	regulator-min-microvolt = <3300000>;
	99	regulator-max-microvolt = <3300000>;
	100	regulator-always-on;
	101	};
	102
	103	vddfuse_reg: LDO_REG1 {
	104	regulator-name = "FUSE_2V5";
	105	regulator-min-microvolt = <2500000>;
	106	regulator-max-microvolt = <2500000>;
	107	};
	108
	109	vddana_reg: LDO_REG2 {
	110	regulator-name = "VDDANA";
	111	regulator-min-microvolt = <3300000>;
	112	regulator-max-microvolt = <3300000>;
	113	regulator-always-on;
	114	};
	115	};
	116	};
b7c2b615 NF	117	};
	118
	119	macb0: ethernet@f0028000 {
	120	phy-mode = "rgmii";
9e65adb4 NF	121	#address-cells = <1>;
9e65adb4 NF	122	#size-cells = <0>;
b7c2b615	123	status = "okay";
9e65adb4 NF	124
	125	ethernet-phy@7 {
	126	reg = <0x7>;
	127	};
b7c2b615 NF	128	};
b7c2b615 NF	129
0da40f3d NF	130	pwm0: pwm@f002c000 {
	131	pinctrl-names = "default";
	132	pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
	133	status = "okay";
	134	};
	135
b7c2b615 NF	136	usart0: serial@f001c000 {
	137	status = "okay";
	138	};
	139
	140	usart1: serial@f0020000 {
	141	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
	142	status = "okay";
	143	};
	144
	145	uart0: serial@f0024000 {
	146	status = "okay";
	147	};
	148
	149	mmc1: mmc@f8000000 {
	150	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
	151	status = "okay";
	152	slot@0 {
	153	reg = <0>;
	154	bus-width = <4>;
	155	cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
	156	};
	157	};
	158
	159	spi1: spi@f8008000 {
d44db494	160	cs-gpios = <&pioC 25 0>;
b7c2b615 NF	161	status = "okay";
	162	};
	163
	164	adc0: adc@f8018000 {
	165	pinctrl-0 = <
	166	&pinctrl_adc0_adtrg
	167	&pinctrl_adc0_ad0
	168	&pinctrl_adc0_ad1
	169	&pinctrl_adc0_ad2
	170	&pinctrl_adc0_ad3
	171	&pinctrl_adc0_ad4
	172	&pinctrl_adc0_ad5
	173	&pinctrl_adc0_ad6
	174	&pinctrl_adc0_ad7
	175	&pinctrl_adc0_ad8
	176	&pinctrl_adc0_ad9
	177	>;
	178	status = "okay";
	179	};
	180
	181	i2c2: i2c@f801c000 {
	182	dmas = <0>, <0>; /* Do not use DMA for i2c2 */
a3b8a7c7	183	pinctrl-0 = <&pinctrl_i2c2_pu>;
b7c2b615 NF	184	status = "okay";
	185	};
	186
	187	macb1: ethernet@f802c000 {
	188	phy-mode = "rmii";
98b80987 NF	189	#address-cells = <1>;
98b80987 NF	190	#size-cells = <0>;
b7c2b615	191	status = "okay";
98b80987 NF	192
	193	ethernet-phy@1 {
	194	reg = <0x1>;
	195	};
b7c2b615 NF	196	};
	197
	198	dbgu: serial@ffffee00 {
	199	status = "okay";
	200	};
	201
	202	pinctrl@fffff200 {
	203	board {
a3b8a7c7 NF	204	pinctrl_i2c0_pu: i2c0_pu {
	205	atmel,pins =
	206	<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
	207	<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
	208	};
	209
	210	pinctrl_i2c2_pu: i2c2_pu {
	211	atmel,pins =
	212	<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
	213	<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
	214	};
	215
6d39bb01 WY	216	pinctrl_key_gpio: key_gpio_0 {
	217	atmel,pins =
	218	<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
	219	};
	220
b7c2b615 NF	221	pinctrl_mmc0_cd: mmc0_cd {
	222	atmel,pins =
	223	<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
	224	};
	225
	226	pinctrl_mmc1_cd: mmc1_cd {
	227	atmel,pins =
	228	<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
	229	};
	230
	231	pinctrl_usba_vbus: usba_vbus {
	232	atmel,pins =
	233	<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
	234	};
	235	};
	236	};
b7c2b615 NF	237	};
	238
	239	nand0: nand@60000000 {
	240	nand-bus-width = <8>;
	241	nand-ecc-mode = "hw";
	242	atmel,has-pmecc;
	243	atmel,pmecc-cap = <4>;
	244	atmel,pmecc-sector-size = <512>;
	245	nand-on-flash-bbt;
	246	status = "okay";
	247
	248	at91bootstrap@0 {
	249	label = "at91bootstrap";
	250	reg = <0x0 0x40000>;
	251	};
	252
	253	bootloader@40000 {
	254	label = "bootloader";
	255	reg = <0x40000 0x80000>;
	256	};
	257
	258	bootloaderenv@c0000 {
	259	label = "bootloader env";
	260	reg = <0xc0000 0xc0000>;
	261	};
	262
	263	dtb@180000 {
	264	label = "device tree";
	265	reg = <0x180000 0x80000>;
	266	};
	267
	268	kernel@200000 {
	269	label = "kernel";
	270	reg = <0x200000 0x600000>;
	271	};
	272
	273	rootfs@800000 {
	274	label = "rootfs";
	275	reg = <0x800000 0x0f800000>;
	276	};
	277	};
	278
	279	usb0: gadget@00500000 {
	280	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
	281	pinctrl-names = "default";
	282	pinctrl-0 = <&pinctrl_usba_vbus>;
	283	status = "okay";
	284	};
	285
	286	usb1: ohci@00600000 {
	287	num-ports = <3>;
	288	atmel,vbus-gpio = <0
	289	&pioE 3 GPIO_ACTIVE_LOW
	290	&pioE 4 GPIO_ACTIVE_LOW
	291	>;
	292	status = "okay";
	293	};
	294
	295	usb2: ehci@00700000 {
	296	status = "okay";
	297	};
	298	};
	299
1b53e341 BD	300	vcc_mmc0_reg: fixedregulator@0 {
	301	compatible = "regulator-fixed";
	302	gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
	303	regulator-name = "mmc0-card-supply";
	304	regulator-min-microvolt = <3300000>;
	305	regulator-max-microvolt = <3300000>;
	306	};
	307
b7c2b615 NF	308	gpio_keys {
	309	compatible = "gpio-keys";
	310
6d39bb01 WY	311	pinctrl-names = "default";
	312	pinctrl-0 = <&pinctrl_key_gpio>;
	313
b7c2b615 NF	314	bp3 {
	315	label = "PB_USER";
	316	gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
	317	linux,code = <0x104>;
67ae8b9b	318	wakeup-source;
b7c2b615 NF	319	};
	320	};
	321
	322	leds {
	323	compatible = "gpio-leds";
	324
	325	d2 {
	326	label = "d2";
	327	gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */
	328	linux,default-trigger = "heartbeat";
	329	};
	330
	331	d3 {
	332	label = "d3";
	333	gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
	334	};
	335	};
	336	};