[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / at91rm9200ek.dts

/*
 * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
 *
 *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
 *
 * Licensed under GPLv2 only
 */
/dts-v1/;
#include "at91rm9200.dtsi"

/ {
	model = "Atmel AT91RM9200 evaluation kit";
	compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory {
		reg = <0x20000000 0x4000000>;
	};

	clocks {
		slow_xtal {
			clock-frequency = <32768>;
		};

		main_xtal {
			clock-frequency = <18432000>;
		};
	};

	ahb {
		apb {
			tcb0: timer@fffa0000 {
				timer@0 {
					compatible = "atmel,tcb-timer";
					reg = <0>, <1>;
				};

				timer@2 {
					compatible = "atmel,tcb-timer";
					reg = <2>;
				};
			};

			usb1: gadget@fffb0000 {
				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
				status = "okay";
			};

			macb0: ethernet@fffbc000 {
				phy-mode = "rmii";
				status = "okay";

				phy0: ethernet-phy {
					interrupt-parent = <&pioC>;
					interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
				};
			};

			usart1: serial@fffc4000 {
				pinctrl-0 =
						<&pinctrl_uart1
						 &pinctrl_uart1_rts
						 &pinctrl_uart1_cts
						 &pinctrl_uart1_dtr_dsr
						 &pinctrl_uart1_dcd
						 &pinctrl_uart1_ri>;
				status = "okay";
			};

			spi0: spi@fffe0000 {
				status = "okay";
				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
				mtd_dataflash@0 {
					compatible = "atmel,at45", "atmel,dataflash";
					spi-max-frequency = <15000000>;
					reg = <0>;
				};
			};

			dbgu: serial@fffff200 {
				status = "okay";
			};

			rtc: rtc@fffffe00 {
				status = "okay";
			};
		};

		usb0: ohci@300000 {
			num-ports = <2>;
			status = "okay";
		};

		nor_flash@10000000 {
			compatible = "cfi-flash";
			reg = <0x10000000 0x800000>;
			linux,mtd-name = "physmap-flash.0";
			bank-width = <2>;
			#address-cells = <1>;
			#size-cells = <1>;

			barebox@0 {
				label = "barebox";
				reg = <0x00000 0x40000>;
			};

			bareboxenv@40000 {
				label = "bareboxenv";
				reg = <0x40000 0x10000>;
			};

			kernel@50000 {
				label = "kernel";
				reg = <0x50000 0x300000>;
			};

			root@350000  {
				label = "root";
				reg = <0x350000 0x4B0000>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		ds2 {
			label = "green";
			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "mmc0";
		};

		ds4 {
			label = "yellow";
			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "heartbeat";
		};

		ds6 {
			label = "red";
			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
		};
	};
};
Commit	Line	Data
c84ca7ce JE	1	/*
	2	* at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
	3	*
	4	* Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
	5	*
	6	* Licensed under GPLv2 only
	7	*/
	8	/dts-v1/;
6db64d29	9	#include "at91rm9200.dtsi"
c84ca7ce JE	10
	11	/ {
	12	model = "Atmel AT91RM9200 evaluation kit";
	13	compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
	14
927ccfe3 AB	15	chosen {
	16	stdout-path = "serial0:115200n8";
	17	};
	18
c84ca7ce JE	19	memory {
	20	reg = <0x20000000 0x4000000>;
	21	};
	22
	23	clocks {
94788118 AB	24	slow_xtal {
	25	clock-frequency = <32768>;
	26	};
	27
	28	main_xtal {
	29	clock-frequency = <18432000>;
	30	};
c84ca7ce JE	31	};
	32
	33	ahb {
	34	apb {
dbc9573e AB	35	tcb0: timer@fffa0000 {
	36	timer@0 {
	37	compatible = "atmel,tcb-timer";
	38	reg = <0>, <1>;
	39	};
	40
	41	timer@2 {
	42	compatible = "atmel,tcb-timer";
	43	reg = <2>;
	44	};
	45	};
	46
ca594844 NF	47	usb1: gadget@fffb0000 {
	48	atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
	49	atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
c84ca7ce JE	50	status = "okay";
	51	};
	52
ce3b2630 JE	53	macb0: ethernet@fffbc000 {
	54	phy-mode = "rmii";
	55	status = "okay";
44fa054e BB	56
	57	phy0: ethernet-phy {
	58	interrupt-parent = <&pioC>;
	59	interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
	60	};
ce3b2630 JE	61	};
ce3b2630 JE	62
ca594844 NF	63	usart1: serial@fffc4000 {
	64	pinctrl-0 =
	65	<&pinctrl_uart1
	66	&pinctrl_uart1_rts
	67	&pinctrl_uart1_cts
	68	&pinctrl_uart1_dtr_dsr
	69	&pinctrl_uart1_dcd
	70	&pinctrl_uart1_ri>;
c84ca7ce JE	71	status = "okay";
c84ca7ce JE	72	};
26e3326c JCPV	73
	74	spi0: spi@fffe0000 {
	75	status = "okay";
	76	cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
	77	mtd_dataflash@0 {
	78	compatible = "atmel,at45", "atmel,dataflash";
	79	spi-max-frequency = <15000000>;
	80	reg = <0>;
	81	};
	82	};
ca594844 NF	83
	84	dbgu: serial@fffff200 {
	85	status = "okay";
	86	};
74335f49 AB	87
	88	rtc: rtc@fffffe00 {
	89	status = "okay";
	90	};
c84ca7ce JE	91	};
c84ca7ce JE	92
8dccafaa	93	usb0: ohci@300000 {
c84ca7ce JE	94	num-ports = <2>;
	95	status = "okay";
	96	};
c8b3cc56 JCPV	97
	98	nor_flash@10000000 {
	99	compatible = "cfi-flash";
	100	reg = <0x10000000 0x800000>;
	101	linux,mtd-name = "physmap-flash.0";
	102	bank-width = <2>;
	103	#address-cells = <1>;
	104	#size-cells = <1>;
	105
	106	barebox@0 {
	107	label = "barebox";
	108	reg = <0x00000 0x40000>;
	109	};
	110
	111	bareboxenv@40000 {
	112	label = "bareboxenv";
	113	reg = <0x40000 0x10000>;
	114	};
	115
	116	kernel@50000 {
	117	label = "kernel";
	118	reg = <0x50000 0x300000>;
	119	};
	120
	121	root@350000 {
	122	label = "root";
	123	reg = <0x350000 0x4B0000>;
	124	};
	125	};
c84ca7ce JE	126	};
	127
	128	leds {
	129	compatible = "gpio-leds";
	130
	131	ds2 {
	132	label = "green";
92f8629b	133	gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
c84ca7ce JE	134	linux,default-trigger = "mmc0";
	135	};
	136
	137	ds4 {
	138	label = "yellow";
92f8629b	139	gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
c84ca7ce JE	140	linux,default-trigger = "heartbeat";
	141	};
	142
	143	ds6 {
	144	label = "red";
92f8629b	145	gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
c84ca7ce JE	146	};
	147	};
	148	};