]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/blame - arch/arm/boot/dts/at91rm9200ek.dts
ARM: at91/dt: add ethernet phy to at91rm9200ek board
[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / at91rm9200ek.dts
CommitLineData
c84ca7ce
JE
1/*
2 * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
3 *
4 * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
5 *
6 * Licensed under GPLv2 only
7 */
8/dts-v1/;
6db64d29 9#include "at91rm9200.dtsi"
c84ca7ce
JE
10
11/ {
12 model = "Atmel AT91RM9200 evaluation kit";
13 compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
14
15 memory {
16 reg = <0x20000000 0x4000000>;
17 };
18
19 clocks {
20 #address-cells = <1>;
21 #size-cells = <1>;
22 ranges;
23
24 main_clock: clock@0 {
25 compatible = "atmel,osc", "fixed-clock";
26 clock-frequency = <18432000>;
27 };
28 };
29
30 ahb {
31 apb {
32 dbgu: serial@fffff200 {
33 status = "okay";
34 };
35
36 usart1: serial@fffc4000 {
37 pinctrl-0 =
38 <&pinctrl_uart1
39 &pinctrl_uart1_rts
40 &pinctrl_uart1_cts
41 &pinctrl_uart1_dtr_dsr
42 &pinctrl_uart1_dcd
43 &pinctrl_uart1_ri>;
44 status = "okay";
45 };
46
ce3b2630
JE
47 macb0: ethernet@fffbc000 {
48 phy-mode = "rmii";
49 status = "okay";
44fa054e
BB
50
51 phy0: ethernet-phy {
52 interrupt-parent = <&pioC>;
53 interrupts = <4 IRQ_TYPE_EDGE_BOTH>;
54 };
ce3b2630
JE
55 };
56
c84ca7ce 57 usb1: gadget@fffb0000 {
92f8629b 58 atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
c84ca7ce
JE
59 status = "okay";
60 };
26e3326c
JCPV
61
62 spi0: spi@fffe0000 {
63 status = "okay";
64 cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
65 mtd_dataflash@0 {
66 compatible = "atmel,at45", "atmel,dataflash";
67 spi-max-frequency = <15000000>;
68 reg = <0>;
69 };
70 };
c84ca7ce
JE
71 };
72
73 usb0: ohci@00300000 {
74 num-ports = <2>;
75 status = "okay";
76 };
77 };
78
79 leds {
80 compatible = "gpio-leds";
81
82 ds2 {
83 label = "green";
92f8629b 84 gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
c84ca7ce
JE
85 linux,default-trigger = "mmc0";
86 };
87
88 ds4 {
89 label = "yellow";
92f8629b 90 gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
c84ca7ce
JE
91 linux,default-trigger = "heartbeat";
92 };
93
94 ds6 {
95 label = "red";
92f8629b 96 gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
c84ca7ce
JE
97 };
98 };
99};