[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / at91sam9g45.dtsi

/*
 * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
 *                    applies to AT91SAM9G45, AT91SAM9M10,
 *                    AT91SAM9G46, AT91SAM9M11 SoC
 *
 *  Copyright (C) 2011 Atmel,
 *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
 *
 * Licensed under GPLv2 or later.
 */

/include/ "skeleton.dtsi"

/ {
	model = "Atmel AT91SAM9G45 family SoC";
	compatible = "atmel,at91sam9g45";
	interrupt-parent = <&aic>;

	aliases {
		serial0 = &dbgu;
		serial1 = &usart0;
		serial2 = &usart1;
		serial3 = &usart2;
		serial4 = &usart3;
		gpio0 = &pioA;
		gpio1 = &pioB;
		gpio2 = &pioC;
		gpio3 = &pioD;
		gpio4 = &pioE;
		tcb0 = &tcb0;
		tcb1 = &tcb1;
		i2c0 = &i2c0;
		i2c1 = &i2c1;
	};
	cpus {
		cpu@0 {
			compatible = "arm,arm926ejs";
		};
	};

	memory {
		reg = <0x70000000 0x10000000>;
	};

	ahb {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		apb {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			aic: interrupt-controller@fffff000 {
				#interrupt-cells = <3>;
				compatible = "atmel,at91rm9200-aic";
				interrupt-controller;
				reg = <0xfffff000 0x200>;
				atmel,external-irqs = <31>;
			};

			ramc0: ramc@ffffe400 {
				compatible = "atmel,at91sam9g45-ddramc";
				reg = <0xffffe400 0x200
				       0xffffe600 0x200>;
			};

			pmc: pmc@fffffc00 {
				compatible = "atmel,at91rm9200-pmc";
				reg = <0xfffffc00 0x100>;
			};

			rstc@fffffd00 {
				compatible = "atmel,at91sam9g45-rstc";
				reg = <0xfffffd00 0x10>;
			};

			pit: timer@fffffd30 {
				compatible = "atmel,at91sam9260-pit";
				reg = <0xfffffd30 0xf>;
				interrupts = <1 4 7>;
			};


			shdwc@fffffd10 {
				compatible = "atmel,at91sam9rl-shdwc";
				reg = <0xfffffd10 0x10>;
			};

			tcb0: timer@fff7c000 {
				compatible = "atmel,at91rm9200-tcb";
				reg = <0xfff7c000 0x100>;
				interrupts = <18 4 0>;
			};

			tcb1: timer@fffd4000 {
				compatible = "atmel,at91rm9200-tcb";
				reg = <0xfffd4000 0x100>;
				interrupts = <18 4 0>;
			};

			dma: dma-controller@ffffec00 {
				compatible = "atmel,at91sam9g45-dma";
				reg = <0xffffec00 0x200>;
				interrupts = <21 4 0>;
			};

			pinctrl@fffff200 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
				ranges = <0xfffff200 0xfffff200 0xa00>;

				atmel,mux-mask = <
				      /*    A         B     */
				       0xffffffff 0xffc003ff  /* pioA */
				       0xffffffff 0x800f8f00  /* pioB */
				       0xffffffff 0x00000e00  /* pioC */
				       0xffffffff 0xff0c1381  /* pioD */
				       0xffffffff 0x81ffff81  /* pioE */
				      >;

				/* shared pinctrl settings */
				dbgu {
					pinctrl_dbgu: dbgu-0 {
						atmel,pins =
							<1 12 0x1 0x0	/* PB12 periph A */
							 1 13 0x1 0x0>;	/* PB13 periph A */
					};
				};

				usart0 {
					pinctrl_usart0: usart0-0 {
						atmel,pins =
							<1 19 0x1 0x1	/* PB19 periph A with pullup */
							 1 18 0x1 0x0>;	/* PB18 periph A */
					};

					pinctrl_usart0_rts: usart0_rts-0 {
						atmel,pins =
							<1 17 0x2 0x0>;	/* PB17 periph B */
					};

					pinctrl_usart0_cts: usart0_cts-0 {
						atmel,pins =
							<1 15 0x2 0x0>;	/* PB15 periph B */
					};
				};

				uart1 {
					pinctrl_usart1: usart1-0 {
						atmel,pins =
							<1 4 0x1 0x1	/* PB4 periph A with pullup */
							 1 5 0x1 0x0>;	/* PB5 periph A */
					};

					pinctrl_usart1_rts: usart1_rts-0 {
						atmel,pins =
							<3 16 0x1 0x0>;	/* PD16 periph A */
					};

					pinctrl_usart1_cts: usart1_cts-0 {
						atmel,pins =
							<3 17 0x1 0x0>;	/* PD17 periph A */
					};
				};

				usart2 {
					pinctrl_usart2: usart2-0 {
						atmel,pins =
							<1 6 0x1 0x1	/* PB6 periph A with pullup */
							 1 7 0x1 0x0>;	/* PB7 periph A */
					};

					pinctrl_usart2_rts: usart2_rts-0 {
						atmel,pins =
							<2 9 0x2 0x0>;	/* PC9 periph B */
					};

					pinctrl_usart2_cts: usart2_cts-0 {
						atmel,pins =
							<2 11 0x2 0x0>;	/* PC11 periph B */
					};
				};

				usart3 {
					pinctrl_usart3: usart3-0 {
						atmel,pins =
							<1 8 0x1 0x1	/* PB9 periph A with pullup */
							 1 9 0x1 0x0>;	/* PB8 periph A */
					};

					pinctrl_usart3_rts: usart3_rts-0 {
						atmel,pins =
							<0 23 0x2 0x0>;	/* PA23 periph B */
					};

					pinctrl_usart3_cts: usart3_cts-0 {
						atmel,pins =
							<0 24 0x2 0x0>;	/* PA24 periph B */
					};
				};

				nand {
					pinctrl_nand: nand-0 {
						atmel,pins =
							<2 8 0x0 0x1	/* PC8 gpio RDY pin pull_up*/
							 2 14 0x0 0x1>;	/* PC14 gpio enable pin pull_up */
					};
				};

				macb {
					pinctrl_macb_rmii: macb_rmii-0 {
						atmel,pins =
							<0 10 0x1 0x0	/* PA10 periph A */
							 0 11 0x1 0x0	/* PA11 periph A */
							 0 12 0x1 0x0	/* PA12 periph A */
							 0 13 0x1 0x0	/* PA13 periph A */
							 0 14 0x1 0x0	/* PA14 periph A */
							 0 15 0x1 0x0	/* PA15 periph A */
							 0 16 0x1 0x0	/* PA16 periph A */
							 0 17 0x1 0x0	/* PA17 periph A */
							 0 18 0x1 0x0	/* PA18 periph A */
							 0 19 0x1 0x0>;	/* PA19 periph A */
					};

					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
						atmel,pins =
							<0 6 0x2 0x0	/* PA6 periph B */
							 0 7 0x2 0x0	/* PA7 periph B */
							 0 8 0x2 0x0	/* PA8 periph B */
							 0 9 0x2 0x0	/* PA9 periph B */
							 0 27 0x2 0x0	/* PA27 periph B */
							 0 28 0x2 0x0	/* PA28 periph B */
							 0 29 0x2 0x0	/* PA29 periph B */
							 0 30 0x2 0x0>;	/* PA30 periph B */
					};
				};

				pioA: gpio@fffff200 {
					compatible = "atmel,at91rm9200-gpio";
					reg = <0xfffff200 0x200>;
					interrupts = <2 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioB: gpio@fffff400 {
					compatible = "atmel,at91rm9200-gpio";
					reg = <0xfffff400 0x200>;
					interrupts = <3 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioC: gpio@fffff600 {
					compatible = "atmel,at91rm9200-gpio";
					reg = <0xfffff600 0x200>;
					interrupts = <4 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioD: gpio@fffff800 {
					compatible = "atmel,at91rm9200-gpio";
					reg = <0xfffff800 0x200>;
					interrupts = <5 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};

				pioE: gpio@fffffa00 {
					compatible = "atmel,at91rm9200-gpio";
					reg = <0xfffffa00 0x200>;
					interrupts = <5 4 1>;
					#gpio-cells = <2>;
					gpio-controller;
					interrupt-controller;
					#interrupt-cells = <2>;
				};
			};

			dbgu: serial@ffffee00 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xffffee00 0x200>;
				interrupts = <1 4 7>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_dbgu>;
				status = "disabled";
			};

			usart0: serial@fff8c000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfff8c000 0x200>;
				interrupts = <7 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart0>;
				status = "disabled";
			};

			usart1: serial@fff90000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfff90000 0x200>;
				interrupts = <8 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart1>;
				status = "disabled";
			};

			usart2: serial@fff94000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfff94000 0x200>;
				interrupts = <9 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart2>;
				status = "disabled";
			};

			usart3: serial@fff98000 {
				compatible = "atmel,at91sam9260-usart";
				reg = <0xfff98000 0x200>;
				interrupts = <10 4 5>;
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_usart3>;
				status = "disabled";
			};

			macb0: ethernet@fffbc000 {
				compatible = "cdns,at32ap7000-macb", "cdns,macb";
				reg = <0xfffbc000 0x100>;
				interrupts = <25 4 3>;
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_macb_rmii>;
				status = "disabled";
			};

			i2c0: i2c@fff84000 {
				compatible = "atmel,at91sam9g10-i2c";
				reg = <0xfff84000 0x100>;
				interrupts = <12 4 6>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			i2c1: i2c@fff88000 {
				compatible = "atmel,at91sam9g10-i2c";
				reg = <0xfff88000 0x100>;
				interrupts = <13 4 6>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			adc0: adc@fffb0000 {
				compatible = "atmel,at91sam9260-adc";
				reg = <0xfffb0000 0x100>;
				interrupts = <20 4 0>;
				atmel,adc-use-external-triggers;
				atmel,adc-channels-used = <0xff>;
				atmel,adc-vref = <3300>;
				atmel,adc-num-channels = <8>;
				atmel,adc-startup-time = <40>;
				atmel,adc-channel-base = <0x30>;
				atmel,adc-drdy-mask = <0x10000>;
				atmel,adc-status-register = <0x1c>;
				atmel,adc-trigger-register = <0x08>;

				trigger@0 {
					trigger-name = "external-rising";
					trigger-value = <0x1>;
					trigger-external;
				};
				trigger@1 {
					trigger-name = "external-falling";
					trigger-value = <0x2>;
					trigger-external;
				};

				trigger@2 {
					trigger-name = "external-any";
					trigger-value = <0x3>;
					trigger-external;
				};

				trigger@3 {
					trigger-name = "continuous";
					trigger-value = <0x6>;
				};
			};
		};

		nand0: nand@40000000 {
			compatible = "atmel,at91rm9200-nand";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x40000000 0x10000000
			       0xffffe200 0x200
			      >;
			atmel,nand-addr-offset = <21>;
			atmel,nand-cmd-offset = <22>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_nand>;
			gpios = <&pioC 8 0
				 &pioC 14 0
				 0
				>;
			status = "disabled";
		};

		usb0: ohci@00700000 {
			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
			reg = <0x00700000 0x100000>;
			interrupts = <22 4 2>;
			status = "disabled";
		};

		usb1: ehci@00800000 {
			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
			reg = <0x00800000 0x100000>;
			interrupts = <22 4 2>;
			status = "disabled";
		};
	};

	i2c@0 {
		compatible = "i2c-gpio";
		gpios = <&pioA 20 0 /* sda */
			 &pioA 21 0 /* scl */
			>;
		i2c-gpio,sda-open-drain;
		i2c-gpio,scl-open-drain;
		i2c-gpio,delay-us = <5>;	/* ~100 kHz */
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};
};
Commit	Line	Data
49fe2ba3 NF	1	/*
	2	* at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
	3	* applies to AT91SAM9G45, AT91SAM9M10,
	4	* AT91SAM9G46, AT91SAM9M11 SoC
	5	*
	6	* Copyright (C) 2011 Atmel,
	7	* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
	8	*
	9	* Licensed under GPLv2 or later.
	10	*/
	11
	12	/include/ "skeleton.dtsi"
	13
	14	/ {
	15	model = "Atmel AT91SAM9G45 family SoC";
	16	compatible = "atmel,at91sam9g45";
	17	interrupt-parent = <&aic>;
	18
	19	aliases {
	20	serial0 = &dbgu;
	21	serial1 = &usart0;
	22	serial2 = &usart1;
	23	serial3 = &usart2;
	24	serial4 = &usart3;
21f81872 NF	25	gpio0 = &pioA;
	26	gpio1 = &pioB;
	27	gpio2 = &pioC;
	28	gpio3 = &pioD;
	29	gpio4 = &pioE;
3a61a5da NF	30	tcb0 = &tcb0;
3a61a5da NF	31	tcb1 = &tcb1;
05dcd361 LD	32	i2c0 = &i2c0;
05dcd361 LD	33	i2c1 = &i2c1;
49fe2ba3 NF	34	};
	35	cpus {
	36	cpu@0 {
	37	compatible = "arm,arm926ejs";
	38	};
	39	};
	40
dcce6ce8	41	memory {
49fe2ba3 NF	42	reg = <0x70000000 0x10000000>;
	43	};
	44
	45	ahb {
	46	compatible = "simple-bus";
	47	#address-cells = <1>;
	48	#size-cells = <1>;
	49	ranges;
	50
	51	apb {
	52	compatible = "simple-bus";
	53	#address-cells = <1>;
	54	#size-cells = <1>;
	55	ranges;
	56
	57	aic: interrupt-controller@fffff000 {
f8a073ee	58	#interrupt-cells = <3>;
49fe2ba3 NF	59	compatible = "atmel,at91rm9200-aic";
49fe2ba3 NF	60	interrupt-controller;
49fe2ba3	61	reg = <0xfffff000 0x200>;
c6573943	62	atmel,external-irqs = <31>;
49fe2ba3 NF	63	};
49fe2ba3 NF	64
a7776ec6 JCPV	65	ramc0: ramc@ffffe400 {
	66	compatible = "atmel,at91sam9g45-ddramc";
	67	reg = <0xffffe400 0x200
	68	0xffffe600 0x200>;
	69	};
	70
eb5e76ff JCPV	71	pmc: pmc@fffffc00 {
	72	compatible = "atmel,at91rm9200-pmc";
	73	reg = <0xfffffc00 0x100>;
	74	};
	75
c8082d34 JCPV	76	rstc@fffffd00 {
	77	compatible = "atmel,at91sam9g45-rstc";
	78	reg = <0xfffffd00 0x10>;
	79	};
	80
23fa648f JCPV	81	pit: timer@fffffd30 {
	82	compatible = "atmel,at91sam9260-pit";
	83	reg = <0xfffffd30 0xf>;
f8a073ee	84	interrupts = <1 4 7>;
23fa648f JCPV	85	};
23fa648f JCPV	86
3a61a5da	87
82015c4e JCPV	88	shdwc@fffffd10 {
	89	compatible = "atmel,at91sam9rl-shdwc";
	90	reg = <0xfffffd10 0x10>;
	91	};
	92
3a61a5da NF	93	tcb0: timer@fff7c000 {
	94	compatible = "atmel,at91rm9200-tcb";
	95	reg = <0xfff7c000 0x100>;
f8a073ee	96	interrupts = <18 4 0>;
3a61a5da NF	97	};
	98
	99	tcb1: timer@fffd4000 {
	100	compatible = "atmel,at91rm9200-tcb";
	101	reg = <0xfffd4000 0x100>;
f8a073ee	102	interrupts = <18 4 0>;
3a61a5da NF	103	};
3a61a5da NF	104
49fe2ba3 NF	105	dma: dma-controller@ffffec00 {
	106	compatible = "atmel,at91sam9g45-dma";
	107	reg = <0xffffec00 0x200>;
f8a073ee	108	interrupts = <21 4 0>;
49fe2ba3 NF	109	};
49fe2ba3 NF	110
e4541ff2 JCPV	111	pinctrl@fffff200 {
	112	#address-cells = <1>;
	113	#size-cells = <1>;
	114	compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
	115	ranges = <0xfffff200 0xfffff200 0xa00>;
	116
5314ec8e JCPV	117	atmel,mux-mask = <
	118	/* A B */
	119	0xffffffff 0xffc003ff /* pioA */
	120	0xffffffff 0x800f8f00 /* pioB */
	121	0xffffffff 0x00000e00 /* pioC */
	122	0xffffffff 0xff0c1381 /* pioD */
	123	0xffffffff 0x81ffff81 /* pioE */
	124	>;
	125
	126	/* shared pinctrl settings */
ec6754a7 JCPV	127	dbgu {
	128	pinctrl_dbgu: dbgu-0 {
	129	atmel,pins =
	130	<1 12 0x1 0x0 /* PB12 periph A */
	131	1 13 0x1 0x0>; /* PB13 periph A */
	132	};
	133	};
	134
9e3129e9 JCPV	135	usart0 {
9e3129e9 JCPV	136	pinctrl_usart0: usart0-0 {
ec6754a7 JCPV	137	atmel,pins =
	138	<1 19 0x1 0x1 /* PB19 periph A with pullup */
	139	1 18 0x1 0x0>; /* PB18 periph A */
	140	};
	141
c58c0c5a	142	pinctrl_usart0_rts: usart0_rts-0 {
ec6754a7	143	atmel,pins =
c58c0c5a JCPV	144	<1 17 0x2 0x0>; /* PB17 periph B */
	145	};
	146
	147	pinctrl_usart0_cts: usart0_cts-0 {
	148	atmel,pins =
	149	<1 15 0x2 0x0>; /* PB15 periph B */
ec6754a7 JCPV	150	};
	151	};
	152
	153	uart1 {
9e3129e9	154	pinctrl_usart1: usart1-0 {
ec6754a7 JCPV	155	atmel,pins =
	156	<1 4 0x1 0x1 /* PB4 periph A with pullup */
	157	1 5 0x1 0x0>; /* PB5 periph A */
	158	};
	159
c58c0c5a JCPV	160	pinctrl_usart1_rts: usart1_rts-0 {
	161	atmel,pins =
	162	<3 16 0x1 0x0>; /* PD16 periph A */
	163	};
	164
	165	pinctrl_usart1_cts: usart1_cts-0 {
ec6754a7	166	atmel,pins =
c58c0c5a	167	<3 17 0x1 0x0>; /* PD17 periph A */
ec6754a7 JCPV	168	};
	169	};
	170
9e3129e9 JCPV	171	usart2 {
9e3129e9 JCPV	172	pinctrl_usart2: usart2-0 {
ec6754a7 JCPV	173	atmel,pins =
	174	<1 6 0x1 0x1 /* PB6 periph A with pullup */
	175	1 7 0x1 0x0>; /* PB7 periph A */
	176	};
	177
c58c0c5a	178	pinctrl_usart2_rts: usart2_rts-0 {
ec6754a7	179	atmel,pins =
c58c0c5a JCPV	180	<2 9 0x2 0x0>; /* PC9 periph B */
	181	};
	182
	183	pinctrl_usart2_cts: usart2_cts-0 {
	184	atmel,pins =
	185	<2 11 0x2 0x0>; /* PC11 periph B */
ec6754a7 JCPV	186	};
	187	};
	188
9e3129e9 JCPV	189	usart3 {
9e3129e9 JCPV	190	pinctrl_usart3: usart3-0 {
ec6754a7 JCPV	191	atmel,pins =
	192	<1 8 0x1 0x1 /* PB9 periph A with pullup */
	193	1 9 0x1 0x0>; /* PB8 periph A */
	194	};
	195
c58c0c5a JCPV	196	pinctrl_usart3_rts: usart3_rts-0 {
	197	atmel,pins =
	198	<0 23 0x2 0x0>; /* PA23 periph B */
	199	};
	200
	201	pinctrl_usart3_cts: usart3_cts-0 {
ec6754a7	202	atmel,pins =
c58c0c5a	203	<0 24 0x2 0x0>; /* PA24 periph B */
ec6754a7 JCPV	204	};
ec6754a7 JCPV	205	};
5314ec8e	206
7a38d450 JCPV	207	nand {
	208	pinctrl_nand: nand-0 {
	209	atmel,pins =
	210	<2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/
	211	2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */
	212	};
	213	};
	214
d9b4fe83 JCPV	215	macb {
	216	pinctrl_macb_rmii: macb_rmii-0 {
	217	atmel,pins =
	218	<0 10 0x1 0x0 /* PA10 periph A */
	219	0 11 0x1 0x0 /* PA11 periph A */
	220	0 12 0x1 0x0 /* PA12 periph A */
	221	0 13 0x1 0x0 /* PA13 periph A */
	222	0 14 0x1 0x0 /* PA14 periph A */
	223	0 15 0x1 0x0 /* PA15 periph A */
	224	0 16 0x1 0x0 /* PA16 periph A */
	225	0 17 0x1 0x0 /* PA17 periph A */
	226	0 18 0x1 0x0 /* PA18 periph A */
	227	0 19 0x1 0x0>; /* PA19 periph A */
	228	};
	229
	230	pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
	231	atmel,pins =
	232	<0 6 0x2 0x0 /* PA6 periph B */
	233	0 7 0x2 0x0 /* PA7 periph B */
	234	0 8 0x2 0x0 /* PA8 periph B */
	235	0 9 0x2 0x0 /* PA9 periph B */
	236	0 27 0x2 0x0 /* PA27 periph B */
	237	0 28 0x2 0x0 /* PA28 periph B */
	238	0 29 0x2 0x0 /* PA29 periph B */
	239	0 30 0x2 0x0>; /* PA30 periph B */
	240	};
	241	};
	242
e4541ff2 JCPV	243	pioA: gpio@fffff200 {
	244	compatible = "atmel,at91rm9200-gpio";
	245	reg = <0xfffff200 0x200>;
	246	interrupts = <2 4 1>;
	247	#gpio-cells = <2>;
	248	gpio-controller;
	249	interrupt-controller;
	250	#interrupt-cells = <2>;
	251	};
	252
	253	pioB: gpio@fffff400 {
	254	compatible = "atmel,at91rm9200-gpio";
	255	reg = <0xfffff400 0x200>;
	256	interrupts = <3 4 1>;
	257	#gpio-cells = <2>;
	258	gpio-controller;
	259	interrupt-controller;
	260	#interrupt-cells = <2>;
	261	};
	262
	263	pioC: gpio@fffff600 {
	264	compatible = "atmel,at91rm9200-gpio";
	265	reg = <0xfffff600 0x200>;
	266	interrupts = <4 4 1>;
	267	#gpio-cells = <2>;
	268	gpio-controller;
	269	interrupt-controller;
	270	#interrupt-cells = <2>;
	271	};
	272
	273	pioD: gpio@fffff800 {
	274	compatible = "atmel,at91rm9200-gpio";
	275	reg = <0xfffff800 0x200>;
	276	interrupts = <5 4 1>;
	277	#gpio-cells = <2>;
	278	gpio-controller;
	279	interrupt-controller;
	280	#interrupt-cells = <2>;
	281	};
	282
	283	pioE: gpio@fffffa00 {
	284	compatible = "atmel,at91rm9200-gpio";
	285	reg = <0xfffffa00 0x200>;
	286	interrupts = <5 4 1>;
	287	#gpio-cells = <2>;
	288	gpio-controller;
	289	interrupt-controller;
	290	#interrupt-cells = <2>;
	291	};
21f81872 NF	292	};
21f81872 NF	293
49fe2ba3 NF	294	dbgu: serial@ffffee00 {
	295	compatible = "atmel,at91sam9260-usart";
	296	reg = <0xffffee00 0x200>;
f8a073ee	297	interrupts = <1 4 7>;
ec6754a7 JCPV	298	pinctrl-names = "default";
ec6754a7 JCPV	299	pinctrl-0 = <&pinctrl_dbgu>;
49fe2ba3 NF	300	status = "disabled";
	301	};
	302
	303	usart0: serial@fff8c000 {
	304	compatible = "atmel,at91sam9260-usart";
	305	reg = <0xfff8c000 0x200>;
f8a073ee	306	interrupts = <7 4 5>;
49fe2ba3 NF	307	atmel,use-dma-rx;
49fe2ba3 NF	308	atmel,use-dma-tx;
ec6754a7	309	pinctrl-names = "default";
9e3129e9	310	pinctrl-0 = <&pinctrl_usart0>;
49fe2ba3 NF	311	status = "disabled";
	312	};
	313
	314	usart1: serial@fff90000 {
	315	compatible = "atmel,at91sam9260-usart";
	316	reg = <0xfff90000 0x200>;
f8a073ee	317	interrupts = <8 4 5>;
49fe2ba3 NF	318	atmel,use-dma-rx;
49fe2ba3 NF	319	atmel,use-dma-tx;
ec6754a7	320	pinctrl-names = "default";
9e3129e9	321	pinctrl-0 = <&pinctrl_usart1>;
49fe2ba3 NF	322	status = "disabled";
	323	};
	324
	325	usart2: serial@fff94000 {
	326	compatible = "atmel,at91sam9260-usart";
	327	reg = <0xfff94000 0x200>;
f8a073ee	328	interrupts = <9 4 5>;
49fe2ba3 NF	329	atmel,use-dma-rx;
49fe2ba3 NF	330	atmel,use-dma-tx;
ec6754a7	331	pinctrl-names = "default";
9e3129e9	332	pinctrl-0 = <&pinctrl_usart2>;
49fe2ba3 NF	333	status = "disabled";
	334	};
	335
	336	usart3: serial@fff98000 {
	337	compatible = "atmel,at91sam9260-usart";
	338	reg = <0xfff98000 0x200>;
f8a073ee	339	interrupts = <10 4 5>;
49fe2ba3 NF	340	atmel,use-dma-rx;
49fe2ba3 NF	341	atmel,use-dma-tx;
ec6754a7	342	pinctrl-names = "default";
9e3129e9	343	pinctrl-0 = <&pinctrl_usart3>;
49fe2ba3 NF	344	status = "disabled";
49fe2ba3 NF	345	};
0d4f99d8 NF	346
	347	macb0: ethernet@fffbc000 {
	348	compatible = "cdns,at32ap7000-macb", "cdns,macb";
	349	reg = <0xfffbc000 0x100>;
f8a073ee	350	interrupts = <25 4 3>;
d9b4fe83 JCPV	351	pinctrl-names = "default";
d9b4fe83 JCPV	352	pinctrl-0 = <&pinctrl_macb_rmii>;
0d4f99d8 NF	353	status = "disabled";
0d4f99d8 NF	354	};
93b298ba	355
05dcd361 LD	356	i2c0: i2c@fff84000 {
	357	compatible = "atmel,at91sam9g10-i2c";
	358	reg = <0xfff84000 0x100>;
	359	interrupts = <12 4 6>;
	360	#address-cells = <1>;
	361	#size-cells = <0>;
	362	status = "disabled";
	363	};
	364
	365	i2c1: i2c@fff88000 {
	366	compatible = "atmel,at91sam9g10-i2c";
	367	reg = <0xfff88000 0x100>;
	368	interrupts = <13 4 6>;
	369	#address-cells = <1>;
	370	#size-cells = <0>;
	371	status = "disabled";
	372	};
	373
93b298ba MR	374	adc0: adc@fffb0000 {
	375	compatible = "atmel,at91sam9260-adc";
	376	reg = <0xfffb0000 0x100>;
f8a073ee	377	interrupts = <20 4 0>;
93b298ba MR	378	atmel,adc-use-external-triggers;
	379	atmel,adc-channels-used = <0xff>;
	380	atmel,adc-vref = <3300>;
	381	atmel,adc-num-channels = <8>;
	382	atmel,adc-startup-time = <40>;
	383	atmel,adc-channel-base = <0x30>;
	384	atmel,adc-drdy-mask = <0x10000>;
	385	atmel,adc-status-register = <0x1c>;
	386	atmel,adc-trigger-register = <0x08>;
	387
	388	trigger@0 {
	389	trigger-name = "external-rising";
	390	trigger-value = <0x1>;
	391	trigger-external;
	392	};
	393	trigger@1 {
	394	trigger-name = "external-falling";
	395	trigger-value = <0x2>;
	396	trigger-external;
	397	};
	398
	399	trigger@2 {
	400	trigger-name = "external-any";
	401	trigger-value = <0x3>;
	402	trigger-external;
	403	};
	404
	405	trigger@3 {
	406	trigger-name = "continuous";
	407	trigger-value = <0x6>;
	408	};
	409	};
49fe2ba3	410	};
d6a01661 JCPV	411
	412	nand0: nand@40000000 {
	413	compatible = "atmel,at91rm9200-nand";
	414	#address-cells = <1>;
	415	#size-cells = <1>;
	416	reg = <0x40000000 0x10000000
	417	0xffffe200 0x200
	418	>;
	419	atmel,nand-addr-offset = <21>;
	420	atmel,nand-cmd-offset = <22>;
7a38d450 JCPV	421	pinctrl-names = "default";
7a38d450 JCPV	422	pinctrl-0 = <&pinctrl_nand>;
d6a01661 JCPV	423	gpios = <&pioC 8 0
	424	&pioC 14 0
	425	0
	426	>;
	427	status = "disabled";
	428	};
6a062459 JCPV	429
	430	usb0: ohci@00700000 {
	431	compatible = "atmel,at91rm9200-ohci", "usb-ohci";
	432	reg = <0x00700000 0x100000>;
f8a073ee	433	interrupts = <22 4 2>;
6a062459 JCPV	434	status = "disabled";
6a062459 JCPV	435	};
62c5553a JCPV	436
	437	usb1: ehci@00800000 {
	438	compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
	439	reg = <0x00800000 0x100000>;
f8a073ee	440	interrupts = <22 4 2>;
62c5553a JCPV	441	status = "disabled";
62c5553a JCPV	442	};
49fe2ba3	443	};
8f24bdaa JCPV	444
	445	i2c@0 {
	446	compatible = "i2c-gpio";
	447	gpios = <&pioA 20 0 /* sda */
	448	&pioA 21 0 /* scl */
	449	>;
	450	i2c-gpio,sda-open-drain;
	451	i2c-gpio,scl-open-drain;
	452	i2c-gpio,delay-us = <5>; /* ~100 kHz */
	453	#address-cells = <1>;
	454	#size-cells = <0>;
	455	status = "disabled";
	456	};
49fe2ba3	457	};