]>
Commit | Line | Data |
---|---|---|
ec6754a7 JCPV |
1 | /* |
2 | * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board | |
3 | * | |
4 | * Copyright (C) 2012 Atmel, | |
5 | * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> | |
6 | * | |
7 | * Licensed under GPLv2 or later. | |
8 | */ | |
6db64d29 | 9 | #include "at91sam9x5cm.dtsi" |
ec6754a7 JCPV |
10 | |
11 | / { | |
12 | model = "Atmel AT91SAM9X5-EK"; | |
13 | compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; | |
14 | ||
15 | chosen { | |
b090e5f6 | 16 | bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; |
ec6754a7 JCPV |
17 | }; |
18 | ||
19 | ahb { | |
20 | apb { | |
4134a455 | 21 | mmc0: mmc@f0008000 { |
199e2ede JCPV |
22 | pinctrl-0 = < |
23 | &pinctrl_board_mmc0 | |
24 | &pinctrl_mmc0_slot0_clk_cmd_dat0 | |
25 | &pinctrl_mmc0_slot0_dat1_3>; | |
4134a455 LD |
26 | status = "okay"; |
27 | slot@0 { | |
28 | reg = <0>; | |
29 | bus-width = <4>; | |
92f8629b | 30 | cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; |
4134a455 LD |
31 | }; |
32 | }; | |
33 | ||
34 | mmc1: mmc@f000c000 { | |
199e2ede JCPV |
35 | pinctrl-0 = < |
36 | &pinctrl_board_mmc1 | |
37 | &pinctrl_mmc1_slot0_clk_cmd_dat0 | |
38 | &pinctrl_mmc1_slot0_dat1_3>; | |
4134a455 LD |
39 | status = "okay"; |
40 | slot@0 { | |
41 | reg = <0>; | |
42 | bus-width = <4>; | |
92f8629b | 43 | cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>; |
4134a455 LD |
44 | }; |
45 | }; | |
46 | ||
ec6754a7 JCPV |
47 | dbgu: serial@fffff200 { |
48 | status = "okay"; | |
49 | }; | |
50 | ||
51 | usart0: serial@f801c000 { | |
52 | status = "okay"; | |
53 | }; | |
54 | ||
17bcaaa3 JCPV |
55 | usb2: gadget@f803c000 { |
56 | atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; | |
57 | status = "okay"; | |
58 | }; | |
59 | ||
ec6754a7 JCPV |
60 | i2c0: i2c@f8010000 { |
61 | status = "okay"; | |
4dc6e27c RG |
62 | |
63 | wm8731: wm8731@1a { | |
64 | compatible = "wm8731"; | |
65 | reg = <0x1a>; | |
66 | }; | |
ec6754a7 JCPV |
67 | }; |
68 | ||
199e2ede JCPV |
69 | pinctrl@fffff400 { |
70 | mmc0 { | |
71 | pinctrl_board_mmc0: mmc0-board { | |
72 | atmel,pins = | |
c9d0f317 | 73 | <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ |
199e2ede JCPV |
74 | }; |
75 | }; | |
76 | ||
77 | mmc1 { | |
78 | pinctrl_board_mmc1: mmc1-board { | |
79 | atmel,pins = | |
c9d0f317 | 80 | <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */ |
199e2ede JCPV |
81 | }; |
82 | }; | |
83 | }; | |
b6811e9a RG |
84 | |
85 | spi0: spi@f0000000 { | |
86 | status = "okay"; | |
87 | cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; | |
88 | m25p80@0 { | |
89 | compatible = "atmel,at25df321a"; | |
90 | spi-max-frequency = <50000000>; | |
91 | reg = <0>; | |
92 | }; | |
93 | }; | |
c77bcef4 WY |
94 | |
95 | watchdog@fffffe40 { | |
96 | status = "okay"; | |
97 | }; | |
45b76352 RG |
98 | |
99 | ssc0: ssc@f0010000 { | |
100 | status = "okay"; | |
101 | }; | |
ec6754a7 JCPV |
102 | }; |
103 | ||
104 | usb0: ohci@00600000 { | |
105 | status = "okay"; | |
69b90f1a NF |
106 | num-ports = <3>; |
107 | atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ | |
108 | &pioD 19 GPIO_ACTIVE_LOW | |
92f8629b | 109 | &pioD 20 GPIO_ACTIVE_LOW |
ec6754a7 JCPV |
110 | >; |
111 | }; | |
112 | ||
113 | usb1: ehci@00700000 { | |
114 | status = "okay"; | |
115 | }; | |
116 | }; | |
90d01929 RG |
117 | |
118 | sound { | |
119 | compatible = "atmel,sam9x5-wm8731-audio"; | |
120 | ||
121 | atmel,model = "wm8731 @ AT91SAM9X5EK"; | |
122 | ||
123 | atmel,audio-routing = | |
124 | "Headphone Jack", "RHPOUT", | |
125 | "Headphone Jack", "LHPOUT", | |
126 | "LLINEIN", "Line In Jack", | |
127 | "RLINEIN", "Line In Jack"; | |
128 | ||
129 | atmel,ssc-controller = <&ssc0>; | |
130 | atmel,audio-codec = <&wm8731>; | |
131 | }; | |
ec6754a7 | 132 | }; |