[mirror_ubuntu-hirsute-kernel.git] / arch / arm / boot / dts / at91sam9x5ek.dtsi

/*
 * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
 *
 *  Copyright (C) 2012 Atmel,
 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
 *
 * Licensed under GPLv2 or later.
 */
#include "at91sam9x5cm.dtsi"

/ {
	model = "Atmel AT91SAM9X5-EK";
	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";

	chosen {
		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
		stdout-path = "serial0:115200n8";
	};

	ahb {
		apb {
			mmc0: mmc@f0008000 {
				pinctrl-0 = <
					&pinctrl_board_mmc0
					&pinctrl_mmc0_slot0_clk_cmd_dat0
					&pinctrl_mmc0_slot0_dat1_3>;
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
				};
			};

			mmc1: mmc@f000c000 {
				pinctrl-0 = <
					&pinctrl_board_mmc1
					&pinctrl_mmc1_slot0_clk_cmd_dat0
					&pinctrl_mmc1_slot0_dat1_3>;
				status = "okay";
				slot@0 {
					reg = <0>;
					bus-width = <4>;
					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
				};
			};

			dbgu: serial@fffff200 {
				status = "okay";
			};

			usart0: serial@f801c000 {
				atmel,use-dma-rx;
				atmel,use-dma-tx;
				status = "okay";
			};

			usb2: gadget@f803c000 {
				pinctrl-names = "default";
				pinctrl-0 = <&pinctrl_board_usb2>;
				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
				status = "okay";
			};

			i2c0: i2c@f8010000 {
				status = "okay";

				wm8731: wm8731@1a {
					compatible = "wm8731";
					reg = <0x1a>;
				};
			};

			adc0: adc@f804c000 {
				atmel,adc-ts-wires = <4>;
				atmel,adc-ts-pressure-threshold = <10000>;
				status = "okay";
			};

			pinctrl@fffff400 {
				camera_sensor {
					pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
						atmel,pins =
							<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
					};

					pinctrl_sensor_power: sensor_power-0 {
						atmel,pins =
							<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					};

					pinctrl_sensor_reset: sensor_reset-0 {
						atmel,pins =
							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
					};
				};

				mmc0 {
					pinctrl_board_mmc0: mmc0-board {
						atmel,pins =
							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
					};
				};

				mmc1 {
					pinctrl_board_mmc1: mmc1-board {
						atmel,pins =
							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
					};
				};

				usb2 {
					pinctrl_board_usb2: usb2-board {
						atmel,pins =
							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
					};
				};
			};

			spi0: spi@f0000000 {
				status = "disabled"; /* conflicts with mmc1 */
				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
				m25p80@0 {
					compatible = "atmel,at25df321a";
					spi-max-frequency = <50000000>;
					reg = <0>;
				};
			};

			watchdog@fffffe40 {
				status = "okay";
			};

			ssc0: ssc@f0010000 {
				status = "okay";
			};
		};

		usb0: ohci@600000 {
			status = "okay";
			num-ports = <3>;
			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
					   &pioD 19 GPIO_ACTIVE_LOW
					   &pioD 20 GPIO_ACTIVE_LOW
					  >;
		};

		usb1: ehci@700000 {
			status = "okay";
		};
	};

	sound {
		compatible = "atmel,sam9x5-wm8731-audio";

		atmel,model = "wm8731 @ AT91SAM9X5EK";

		atmel,audio-routing =
			"Headphone Jack", "RHPOUT",
			"Headphone Jack", "LHPOUT",
			"LLINEIN", "Line In Jack",
			"RLINEIN", "Line In Jack";

		atmel,ssc-controller = <&ssc0>;
		atmel,audio-codec = <&wm8731>;
	};
};
Commit	Line	Data
ec6754a7 JCPV	1	/*
	2	* at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
	3	*
	4	* Copyright (C) 2012 Atmel,
	5	* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
	6	*
	7	* Licensed under GPLv2 or later.
	8	*/
6db64d29	9	#include "at91sam9x5cm.dtsi"
ec6754a7 JCPV	10
	11	/ {
	12	model = "Atmel AT91SAM9X5-EK";
	13	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
	14
	15	chosen {
5bb27f09 AB	16	bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
5bb27f09 AB	17	stdout-path = "serial0:115200n8";
ec6754a7 JCPV	18	};
	19
	20	ahb {
	21	apb {
4134a455	22	mmc0: mmc@f0008000 {
199e2ede JCPV	23	pinctrl-0 = <
	24	&pinctrl_board_mmc0
	25	&pinctrl_mmc0_slot0_clk_cmd_dat0
	26	&pinctrl_mmc0_slot0_dat1_3>;
4134a455 LD	27	status = "okay";
	28	slot@0 {
	29	reg = <0>;
	30	bus-width = <4>;
92f8629b	31	cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
4134a455 LD	32	};
	33	};
	34
	35	mmc1: mmc@f000c000 {
199e2ede JCPV	36	pinctrl-0 = <
	37	&pinctrl_board_mmc1
	38	&pinctrl_mmc1_slot0_clk_cmd_dat0
	39	&pinctrl_mmc1_slot0_dat1_3>;
4134a455 LD	40	status = "okay";
	41	slot@0 {
	42	reg = <0>;
	43	bus-width = <4>;
92f8629b	44	cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
4134a455 LD	45	};
	46	};
	47
ec6754a7 JCPV	48	dbgu: serial@fffff200 {
	49	status = "okay";
	50	};
	51
	52	usart0: serial@f801c000 {
854106bc NF	53	atmel,use-dma-rx;
854106bc NF	54	atmel,use-dma-tx;
ec6754a7 JCPV	55	status = "okay";
	56	};
	57
17bcaaa3	58	usb2: gadget@f803c000 {
73734551 SR	59	pinctrl-names = "default";
73734551 SR	60	pinctrl-0 = <&pinctrl_board_usb2>;
17bcaaa3 JCPV	61	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
	62	status = "okay";
	63	};
	64
ec6754a7 JCPV	65	i2c0: i2c@f8010000 {
ec6754a7 JCPV	66	status = "okay";
4dc6e27c RG	67
	68	wm8731: wm8731@1a {
	69	compatible = "wm8731";
	70	reg = <0x1a>;
	71	};
ec6754a7 JCPV	72	};
ec6754a7 JCPV	73
7c08d8cd JW	74	adc0: adc@f804c000 {
	75	atmel,adc-ts-wires = <4>;
	76	atmel,adc-ts-pressure-threshold = <10000>;
	77	status = "okay";
	78	};
	79
199e2ede	80	pinctrl@fffff400 {
436ea603 JW	81	camera_sensor {
	82	pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
	83	atmel,pins =
	84	<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
	85	};
	86
	87	pinctrl_sensor_power: sensor_power-0 {
	88	atmel,pins =
	89	<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
	90	};
	91
	92	pinctrl_sensor_reset: sensor_reset-0 {
	93	atmel,pins =
	94	<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
	95	};
	96	};
	97
199e2ede JCPV	98	mmc0 {
	99	pinctrl_board_mmc0: mmc0-board {
	100	atmel,pins =
c9d0f317	101	<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
199e2ede JCPV	102	};
	103	};
	104
	105	mmc1 {
	106	pinctrl_board_mmc1: mmc1-board {
	107	atmel,pins =
c9d0f317	108	<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
199e2ede JCPV	109	};
199e2ede JCPV	110	};
73734551 SR	111
	112	usb2 {
	113	pinctrl_board_usb2: usb2-board {
	114	atmel,pins =
	115	<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
	116	};
	117	};
199e2ede	118	};
b6811e9a RG	119
b6811e9a RG	120	spi0: spi@f0000000 {
1142f176	121	status = "disabled"; /* conflicts with mmc1 */
b6811e9a RG	122	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
	123	m25p80@0 {
	124	compatible = "atmel,at25df321a";
	125	spi-max-frequency = <50000000>;
	126	reg = <0>;
	127	};
	128	};
c77bcef4 WY	129
	130	watchdog@fffffe40 {
	131	status = "okay";
	132	};
45b76352 RG	133
	134	ssc0: ssc@f0010000 {
	135	status = "okay";
	136	};
ec6754a7 JCPV	137	};
ec6754a7 JCPV	138
8dccafaa	139	usb0: ohci@600000 {
ec6754a7	140	status = "okay";
69b90f1a NF	141	num-ports = <3>;
	142	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW // Activate to have access to port A */
	143	&pioD 19 GPIO_ACTIVE_LOW
92f8629b	144	&pioD 20 GPIO_ACTIVE_LOW
ec6754a7 JCPV	145	>;
	146	};
	147
8dccafaa	148	usb1: ehci@700000 {
ec6754a7 JCPV	149	status = "okay";
	150	};
	151	};
90d01929 RG	152
	153	sound {
	154	compatible = "atmel,sam9x5-wm8731-audio";
	155
	156	atmel,model = "wm8731 @ AT91SAM9X5EK";
	157
	158	atmel,audio-routing =
	159	"Headphone Jack", "RHPOUT",
	160	"Headphone Jack", "LHPOUT",
	161	"LLINEIN", "Line In Jack",
	162	"RLINEIN", "Line In Jack";
	163
	164	atmel,ssc-controller = <&ssc0>;
	165	atmel,audio-codec = <&wm8731>;
	166	};
ec6754a7	167	};