projects / mirror_ubuntu-artful-kernel.git / blame
| Commit | Line | Data |
|---|---|---|
| 285f3690 TL |
1 | /* |
| 2 | * This program is free software; you can redistribute it and/or modify | |
| 3 | * it under the terms of the GNU General Public License version 2 as | |
| 4 | * published by the Free Software Foundation. | |
| 5 | */ | |
| 6 | /dts-v1/; | |
| 7 | ||
| 8 | #include "dm814x.dtsi" | |
| 9 | ||
| 10 | / { | |
| 60fdcb88 | 11 | model = "HP t410 Smart Zero Client"; |
| 285f3690 TL |
12 | compatible = "hp,t410", "ti,dm8148"; |
| 13 | ||
| 14 | memory { | |
| 15 | device_type = "memory"; | |
| 16 | reg = <0x80000000 0x40000000>; /* 1 GB */ | |
| 17 | }; | |
| f24f1bdc | 18 | |
| 868e2478 TL |
19 | /* gpio9 seems to control USB VBUS regulator and/or hub power */ |
| 20 | usb_power: regulator@9 { | |
| 21 | compatible = "regulator-fixed"; | |
| 22 | regulator-name = "usb_power"; | |
| 23 | regulator-min-microvolt = <5000000>; | |
| 24 | regulator-max-microvolt = <5000000>; | |
| 25 | gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; | |
| 26 | enable-active-high; | |
| 27 | regulator-always-on; | |
| 28 | }; | |
| 29 | ||
| f24f1bdc TL |
30 | vmmcsd_fixed: fixedregulator@0 { |
| 31 | compatible = "regulator-fixed"; | |
| 32 | regulator-name = "vmmcsd_fixed"; | |
| 33 | regulator-min-microvolt = <3300000>; | |
| 34 | regulator-max-microvolt = <3300000>; | |
| 35 | }; | |
| 285f3690 TL |
36 | }; |
| 37 | ||
| 38 | &cpsw_emac0 { | |
| 39 | phy_id = <&davinci_mdio>, <0>; | |
| 87ee15ec | 40 | phy-mode = "rgmii"; |
| 285f3690 TL |
41 | }; |
| 42 | ||
| 43 | &cpsw_emac1 { | |
| 44 | phy_id = <&davinci_mdio>, <1>; | |
| 87ee15ec | 45 | phy-mode = "rgmii"; |
| 285f3690 | 46 | }; |
| f24f1bdc TL |
47 | |
| 48 | &mmc3 { | |
| 49 | pinctrl-names = "default"; | |
| 50 | pinctrl-0 = <&sd2_pins>; | |
| 51 | vmmc-supply = <&vmmcsd_fixed>; | |
| 52 | bus-width = <8>; | |
| 53 | dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */ | |
| 54 | &edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */ | |
| 55 | dma-names = "tx", "rx"; | |
| 56 | }; | |
| 57 | ||
| 58 | &pincntl { | |
| 59 | sd2_pins: pinmux_sd2_pins { | |
| 60 | pinctrl-single,pins = < | |
| 61 | DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[7] */ | |
| 62 | DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[6] */ | |
| 63 | DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[5] */ | |
| 64 | DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[4] */ | |
| 65 | DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[3] */ | |
| 66 | DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[2] */ | |
| 67 | DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[1] */ | |
| 68 | DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1) /* SD2_DAT[0] */ | |
| 69 | DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1) /* SD2_CLK */ | |
| 70 | DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2) /* SD2_CMD */ | |
| 71 | DM814X_IOPAD(0x0920, PIN_INPUT | 40) /* SD2_SDCD */ | |
| 72 | >; | |
| 73 | }; | |
| 868e2478 TL |
74 | |
| 75 | usb0_pins: pinmux_usb0_pins { | |
| 76 | pinctrl-single,pins = < | |
| 77 | DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */ | |
| 78 | >; | |
| 79 | }; | |
| 80 | ||
| 81 | usb1_pins: pinmux_usb1_pins { | |
| 82 | pinctrl-single,pins = < | |
| 83 | DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80) /* USB1_DRVVBUS */ | |
| 84 | >; | |
| 85 | }; | |
| 86 | }; | |
| 87 | ||
| 88 | &usb0 { | |
| 89 | pinctrl-names = "default"; | |
| 90 | pinctrl-0 = <&usb0_pins>; | |
| 91 | dr_mode = "host"; | |
| 92 | }; | |
| 93 | ||
| 94 | &usb1 { | |
| 95 | pinctrl-names = "default"; | |
| 96 | pinctrl-0 = <&usb1_pins>; | |
| 97 | dr_mode = "host"; | |
| f24f1bdc | 98 | }; |