projects / mirror_ubuntu-zesty-kernel.git / blame
| Commit | Line | Data |
|---|---|---|
| 37078732 SH |
1 | /dts-v1/; |
| 2 | ||
| 3 | #include "dove.dtsi" | |
| 4 | ||
| 5 | / { | |
| 6 | model = "Globalscale D3Plug"; | |
| 7 | compatible = "globalscale,d3plug", "marvell,dove"; | |
| 8 | ||
| 9 | memory { | |
| 10 | device_type = "memory"; | |
| 11 | reg = <0x00000000 0x40000000>; | |
| 12 | }; | |
| 13 | ||
| 14 | chosen { | |
| 15 | bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; | |
| 16 | }; | |
| 17 | ||
| 18 | leds { | |
| 19 | compatible = "gpio-leds"; | |
| 20 | pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; | |
| 21 | pinctrl-names = "default"; | |
| 22 | ||
| 23 | wlan-act { | |
| 24 | label = "wlan-act"; | |
| 25 | gpios = <&gpio0 0 1>; | |
| 26 | }; | |
| 27 | ||
| 28 | wlan-ap { | |
| 29 | label = "wlan-ap"; | |
| 30 | gpios = <&gpio0 1 1>; | |
| 31 | }; | |
| 32 | ||
| 33 | status { | |
| 34 | label = "status"; | |
| 35 | gpios = <&gpio0 2 1>; | |
| 36 | }; | |
| 37 | }; | |
| 38 | ||
| 39 | regulators { | |
| 40 | compatible = "simple-bus"; | |
| 41 | #address-cells = <1>; | |
| 42 | #size-cells = <0>; | |
| 43 | ||
| 44 | usb_power: regulator@1 { | |
| 45 | compatible = "regulator-fixed"; | |
| 46 | reg = <1>; | |
| 47 | regulator-name = "USB Power"; | |
| 48 | regulator-min-microvolt = <5000000>; | |
| 49 | regulator-max-microvolt = <5000000>; | |
| 50 | enable-active-high; | |
| 51 | regulator-always-on; | |
| 52 | regulator-boot-on; | |
| 53 | gpio = <&gpio0 8 0>; | |
| 54 | pinctrl-0 = <&pmx_gpio_8>; | |
| 55 | pinctrl-names = "default"; | |
| 56 | }; | |
| 57 | }; | |
| 58 | }; | |
| 59 | ||
| 60 | &uart0 { status = "okay"; }; | |
| 61 | &sata0 { status = "okay"; }; | |
| 62 | &i2c0 { status = "okay"; }; | |
| 63 | ||
| 64 | /* Samsung M8G2F eMMC */ | |
| 65 | &sdio0 { | |
| 66 | status = "okay"; | |
| 67 | non-removable; | |
| 68 | bus-width = <4>; | |
| 69 | }; | |
| 70 | ||
| 71 | /* Marvell SD8787 WLAN/BT */ | |
| 72 | &sdio1 { | |
| 73 | status = "okay"; | |
| 74 | non-removable; | |
| 75 | }; | |
| 76 | ||
| 77 | &spi0 { | |
| 78 | status = "okay"; | |
| 79 | ||
| 80 | /* spi0.0: 2M Flash Macronix MX25L1605D */ | |
| 81 | spi-flash@0 { | |
| 82 | compatible = "st,m25l1605d"; | |
| 83 | spi-max-frequency = <86000000>; | |
| 84 | reg = <0>; | |
| 85 | }; | |
| 86 | }; | |
| 87 | ||
| 88 | &pcie { | |
| 89 | status = "okay"; | |
| 90 | /* Fresco Logic USB3.0 xHCI controller */ | |
| 91 | pcie-port@0 { | |
| 92 | status = "okay"; | |
| 93 | reset-gpios = <&gpio0 26 1>; | |
| 94 | reset-delay-us = <20000>; | |
| 95 | pinctrl-0 = <&pmx_camera_gpio>; | |
| 96 | pinctrl-names = "default"; | |
| 97 | }; | |
| 98 | /* Mini-PCIe slot */ | |
| 99 | pcie-port@1 { | |
| 100 | status = "okay"; | |
| 101 | reset-gpios = <&gpio0 25 1>; | |
| 102 | }; | |
| 103 | }; |