]>
Commit | Line | Data |
---|---|---|
80a8b54b SH |
1 | /include/ "skeleton.dtsi" |
2 | ||
6953af77 SH |
3 | #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) |
4 | ||
80a8b54b SH |
5 | / { |
6 | compatible = "marvell,dove"; | |
7 | model = "Marvell Armada 88AP510 SoC"; | |
0ad44659 | 8 | interrupt-parent = <&intc>; |
80a8b54b | 9 | |
9139acd1 SH |
10 | aliases { |
11 | gpio0 = &gpio0; | |
12 | gpio1 = &gpio1; | |
13 | gpio2 = &gpio2; | |
14 | }; | |
15 | ||
2d299834 SH |
16 | cpus { |
17 | #address-cells = <1>; | |
18 | #size-cells = <0>; | |
19 | ||
20 | cpu0: cpu@0 { | |
21 | compatible = "marvell,pj4a", "marvell,sheeva-v7"; | |
22 | device_type = "cpu"; | |
23 | next-level-cache = <&l2>; | |
24 | reg = <0>; | |
25 | }; | |
26 | }; | |
27 | ||
28 | l2: l2-cache { | |
29 | compatible = "marvell,tauros2-cache"; | |
30 | marvell,tauros2-cache-features = <0>; | |
31 | }; | |
32 | ||
960ee4e7 SH |
33 | mbus { |
34 | compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus"; | |
35 | #address-cells = <2>; | |
36 | #size-cells = <1>; | |
37 | controller = <&mbusc>; | |
38 | pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */ | |
39 | pcie-io-aperture = <0xf2000000 0x00200000>; /* 2M I/O space */ | |
40 | ||
41 | ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000 /* MBUS regs 1M */ | |
42 | MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000 /* AXI regs 16M */ | |
43 | MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000 /* BootROM 128M */ | |
44 | MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */ | |
45 | MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */ | |
4c3f6b86 | 46 | |
74ecaa40 SH |
47 | pcie: pcie-controller { |
48 | compatible = "marvell,dove-pcie"; | |
49 | status = "disabled"; | |
50 | device_type = "pci"; | |
51 | #address-cells = <3>; | |
52 | #size-cells = <2>; | |
53 | ||
54 | msi-parent = <&intc>; | |
55 | bus-range = <0x00 0xff>; | |
56 | ||
57 | ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000 | |
58 | 0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000 | |
59 | 0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 Mem */ | |
60 | 0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 I/O */ | |
61 | 0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */ | |
62 | 0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */ | |
63 | ||
64 | pcie-port@0 { | |
65 | device_type = "pci"; | |
66 | status = "disabled"; | |
67 | assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; | |
68 | reg = <0x0800 0 0 0 0>; | |
69 | clocks = <&gate_clk 4>; | |
70 | marvell,pcie-port = <0>; | |
71 | ||
72 | #address-cells = <3>; | |
73 | #size-cells = <2>; | |
74 | ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 | |
75 | 0x81000000 0 0 0x81000000 0x1 0 1 0>; | |
76 | ||
77 | #interrupt-cells = <1>; | |
78 | interrupt-map-mask = <0 0 0 0>; | |
79 | interrupt-map = <0 0 0 0 &intc 16>; | |
80 | }; | |
81 | ||
82 | pcie-port@1 { | |
83 | device_type = "pci"; | |
84 | status = "disabled"; | |
85 | assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; | |
86 | reg = <0x1000 0 0 0 0>; | |
87 | clocks = <&gate_clk 5>; | |
88 | marvell,pcie-port = <1>; | |
89 | ||
90 | #address-cells = <3>; | |
91 | #size-cells = <2>; | |
92 | ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 | |
93 | 0x81000000 0 0 0x81000000 0x2 0 1 0>; | |
94 | ||
95 | #interrupt-cells = <1>; | |
96 | interrupt-map-mask = <0 0 0 0>; | |
97 | interrupt-map = <0 0 0 0 &intc 18>; | |
98 | }; | |
99 | }; | |
100 | ||
0ad44659 SH |
101 | internal-regs { |
102 | compatible = "simple-bus"; | |
4c3f6b86 | 103 | #address-cells = <1>; |
0ad44659 SH |
104 | #size-cells = <1>; |
105 | ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000 /* MBUS regs 1M */ | |
106 | 0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000 /* AXI regs 16M */ | |
107 | 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */ | |
108 | 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */ | |
109 | ||
b31b3211 JC |
110 | spi0: spi-ctrl@10600 { |
111 | compatible = "marvell,orion-spi"; | |
112 | #address-cells = <1>; | |
113 | #size-cells = <0>; | |
114 | cell-index = <0>; | |
115 | interrupts = <6>; | |
116 | reg = <0x10600 0x28>; | |
0ad44659 | 117 | clocks = <&core_clk 0>; |
b31b3211 JC |
118 | pinctrl-0 = <&pmx_spi0>; |
119 | pinctrl-names = "default"; | |
120 | status = "disabled"; | |
0ad44659 SH |
121 | }; |
122 | ||
b31b3211 JC |
123 | i2c0: i2c-ctrl@11000 { |
124 | compatible = "marvell,mv64xxx-i2c"; | |
125 | reg = <0x11000 0x20>; | |
126 | #address-cells = <1>; | |
127 | #size-cells = <0>; | |
128 | interrupts = <11>; | |
129 | clock-frequency = <400000>; | |
130 | timeout-ms = <1000>; | |
0ad44659 | 131 | clocks = <&core_clk 0>; |
b31b3211 | 132 | status = "disabled"; |
0ad44659 SH |
133 | }; |
134 | ||
135 | uart0: serial@12000 { | |
136 | compatible = "ns16550a"; | |
137 | reg = <0x12000 0x100>; | |
138 | reg-shift = <2>; | |
139 | interrupts = <7>; | |
140 | clocks = <&core_clk 0>; | |
141 | status = "disabled"; | |
142 | }; | |
143 | ||
144 | uart1: serial@12100 { | |
145 | compatible = "ns16550a"; | |
146 | reg = <0x12100 0x100>; | |
147 | reg-shift = <2>; | |
148 | interrupts = <8>; | |
149 | clocks = <&core_clk 0>; | |
150 | pinctrl-0 = <&pmx_uart1>; | |
151 | pinctrl-names = "default"; | |
152 | status = "disabled"; | |
153 | }; | |
154 | ||
155 | uart2: serial@12200 { | |
156 | compatible = "ns16550a"; | |
157 | reg = <0x12000 0x100>; | |
158 | reg-shift = <2>; | |
159 | interrupts = <9>; | |
160 | clocks = <&core_clk 0>; | |
161 | status = "disabled"; | |
162 | }; | |
163 | ||
164 | uart3: serial@12300 { | |
165 | compatible = "ns16550a"; | |
166 | reg = <0x12100 0x100>; | |
167 | reg-shift = <2>; | |
168 | interrupts = <10>; | |
169 | clocks = <&core_clk 0>; | |
170 | status = "disabled"; | |
171 | }; | |
172 | ||
b31b3211 JC |
173 | spi1: spi-ctrl@14600 { |
174 | compatible = "marvell,orion-spi"; | |
175 | #address-cells = <1>; | |
176 | #size-cells = <0>; | |
177 | cell-index = <1>; | |
178 | interrupts = <5>; | |
179 | reg = <0x14600 0x28>; | |
180 | clocks = <&core_clk 0>; | |
181 | status = "disabled"; | |
182 | }; | |
183 | ||
184 | mbusc: mbus-ctrl@20000 { | |
185 | compatible = "marvell,mbus-controller"; | |
186 | reg = <0x20000 0x80>, <0x800100 0x8>; | |
187 | }; | |
188 | ||
a16761ac SH |
189 | sysc: system-ctrl@20000 { |
190 | compatible = "marvell,orion-system-controller"; | |
191 | reg = <0x20000 0x110>; | |
192 | }; | |
193 | ||
b31b3211 JC |
194 | bridge_intc: bridge-interrupt-ctrl@20110 { |
195 | compatible = "marvell,orion-bridge-intc"; | |
0ad44659 | 196 | interrupt-controller; |
b31b3211 JC |
197 | #interrupt-cells = <1>; |
198 | reg = <0x20110 0x8>; | |
199 | interrupts = <0>; | |
200 | marvell,#interrupts = <5>; | |
0ad44659 SH |
201 | }; |
202 | ||
b31b3211 JC |
203 | intc: main-interrupt-ctrl@20200 { |
204 | compatible = "marvell,orion-intc"; | |
0ad44659 | 205 | interrupt-controller; |
b31b3211 JC |
206 | #interrupt-cells = <1>; |
207 | reg = <0x20200 0x10>, <0x20210 0x10>; | |
0ad44659 SH |
208 | }; |
209 | ||
b31b3211 JC |
210 | timer: timer@20300 { |
211 | compatible = "marvell,orion-timer"; | |
212 | reg = <0x20300 0x20>; | |
213 | interrupt-parent = <&bridge_intc>; | |
214 | interrupts = <1>, <2>; | |
215 | clocks = <&core_clk 0>; | |
216 | }; | |
217 | ||
7a5b293f EG |
218 | watchdog@20300 { |
219 | compatible = "marvell,orion-wdt"; | |
220 | reg = <0x20300 0x28>, <0x20108 0x4>; | |
221 | interrupt-parent = <&bridge_intc>; | |
222 | interrupts = <3>; | |
223 | clocks = <&core_clk 0>; | |
224 | }; | |
225 | ||
b31b3211 JC |
226 | crypto: crypto-engine@30000 { |
227 | compatible = "marvell,orion-crypto"; | |
228 | reg = <0x30000 0x10000>, | |
229 | <0xffffe000 0x800>; | |
230 | reg-names = "regs", "sram"; | |
231 | interrupts = <31>; | |
232 | clocks = <&gate_clk 15>; | |
233 | status = "okay"; | |
234 | }; | |
235 | ||
236 | ehci0: usb-host@50000 { | |
237 | compatible = "marvell,orion-ehci"; | |
238 | reg = <0x50000 0x1000>; | |
239 | interrupts = <24>; | |
240 | clocks = <&gate_clk 0>; | |
241 | status = "okay"; | |
242 | }; | |
243 | ||
244 | ehci1: usb-host@51000 { | |
245 | compatible = "marvell,orion-ehci"; | |
246 | reg = <0x51000 0x1000>; | |
247 | interrupts = <25>; | |
248 | clocks = <&gate_clk 1>; | |
249 | status = "okay"; | |
250 | }; | |
251 | ||
252 | xor0: dma-engine@60800 { | |
253 | compatible = "marvell,orion-xor"; | |
254 | reg = <0x60800 0x100 | |
255 | 0x60a00 0x100>; | |
256 | clocks = <&gate_clk 23>; | |
257 | status = "okay"; | |
258 | ||
259 | channel0 { | |
260 | interrupts = <39>; | |
261 | dmacap,memcpy; | |
262 | dmacap,xor; | |
263 | }; | |
264 | ||
265 | channel1 { | |
266 | interrupts = <40>; | |
267 | dmacap,memcpy; | |
268 | dmacap,xor; | |
269 | }; | |
270 | }; | |
271 | ||
272 | xor1: dma-engine@60900 { | |
273 | compatible = "marvell,orion-xor"; | |
274 | reg = <0x60900 0x100 | |
275 | 0x60b00 0x100>; | |
276 | clocks = <&gate_clk 24>; | |
277 | status = "okay"; | |
278 | ||
279 | channel0 { | |
280 | interrupts = <42>; | |
281 | dmacap,memcpy; | |
282 | dmacap,xor; | |
283 | }; | |
284 | ||
285 | channel1 { | |
286 | interrupts = <43>; | |
287 | dmacap,memcpy; | |
288 | dmacap,xor; | |
289 | }; | |
290 | }; | |
291 | ||
292 | sdio1: sdio-host@90000 { | |
293 | compatible = "marvell,dove-sdhci"; | |
294 | reg = <0x90000 0x100>; | |
295 | interrupts = <36>, <38>; | |
296 | clocks = <&gate_clk 9>; | |
297 | pinctrl-0 = <&pmx_sdio1>; | |
298 | pinctrl-names = "default"; | |
299 | status = "disabled"; | |
300 | }; | |
301 | ||
302 | eth: ethernet-ctrl@72000 { | |
303 | compatible = "marvell,orion-eth"; | |
304 | #address-cells = <1>; | |
305 | #size-cells = <0>; | |
306 | reg = <0x72000 0x4000>; | |
307 | clocks = <&gate_clk 2>; | |
308 | marvell,tx-checksum-limit = <1600>; | |
309 | status = "disabled"; | |
310 | ||
311 | ethernet-port@0 { | |
b31b3211 JC |
312 | compatible = "marvell,orion-eth-port"; |
313 | reg = <0>; | |
314 | interrupts = <29>; | |
315 | /* overwrite MAC address in bootloader */ | |
316 | local-mac-address = [00 00 00 00 00 00]; | |
317 | phy-handle = <ðphy>; | |
318 | }; | |
319 | }; | |
320 | ||
321 | mdio: mdio-bus@72004 { | |
322 | compatible = "marvell,orion-mdio"; | |
323 | #address-cells = <1>; | |
324 | #size-cells = <0>; | |
325 | reg = <0x72004 0x84>; | |
326 | interrupts = <30>; | |
327 | clocks = <&gate_clk 2>; | |
328 | status = "disabled"; | |
329 | ||
330 | ethphy: ethernet-phy { | |
b31b3211 JC |
331 | /* set phy address in board file */ |
332 | }; | |
333 | }; | |
334 | ||
335 | sdio0: sdio-host@92000 { | |
336 | compatible = "marvell,dove-sdhci"; | |
337 | reg = <0x92000 0x100>; | |
338 | interrupts = <35>, <37>; | |
339 | clocks = <&gate_clk 8>; | |
340 | pinctrl-0 = <&pmx_sdio0>; | |
341 | pinctrl-names = "default"; | |
342 | status = "disabled"; | |
343 | }; | |
344 | ||
345 | sata0: sata-host@a0000 { | |
346 | compatible = "marvell,orion-sata"; | |
347 | reg = <0xa0000 0x2400>; | |
348 | interrupts = <62>; | |
349 | clocks = <&gate_clk 3>; | |
0ad82cd8 AL |
350 | phys = <&sata_phy0>; |
351 | phy-names = "port0"; | |
b31b3211 JC |
352 | nr-ports = <1>; |
353 | status = "disabled"; | |
354 | }; | |
355 | ||
0ad82cd8 AL |
356 | sata_phy0: sata-phy@a2000 { |
357 | compatible = "marvell,mvebu-sata-phy"; | |
358 | reg = <0xa2000 0x0334>; | |
359 | clocks = <&gate_clk 3>; | |
360 | clock-names = "sata"; | |
361 | #phy-cells = <0>; | |
362 | status = "ok"; | |
363 | }; | |
364 | ||
b31b3211 JC |
365 | audio0: audio-controller@b0000 { |
366 | compatible = "marvell,dove-audio"; | |
367 | reg = <0xb0000 0x2210>; | |
368 | interrupts = <19>, <20>; | |
369 | clocks = <&gate_clk 12>; | |
370 | clock-names = "internal"; | |
371 | status = "disabled"; | |
372 | }; | |
373 | ||
374 | audio1: audio-controller@b4000 { | |
375 | compatible = "marvell,dove-audio"; | |
376 | reg = <0xb4000 0x2210>; | |
377 | interrupts = <21>, <22>; | |
378 | clocks = <&gate_clk 13>; | |
379 | clock-names = "internal"; | |
380 | status = "disabled"; | |
381 | }; | |
382 | ||
383 | thermal: thermal-diode@d001c { | |
384 | compatible = "marvell,dove-thermal"; | |
385 | reg = <0xd001c 0x0c>, <0xd005c 0x08>; | |
386 | }; | |
387 | ||
388 | gate_clk: clock-gating-ctrl@d0038 { | |
389 | compatible = "marvell,dove-gating-clock"; | |
390 | reg = <0xd0038 0x4>; | |
391 | clocks = <&core_clk 0>; | |
392 | #clock-cells = <1>; | |
393 | }; | |
394 | ||
0ad44659 SH |
395 | pinctrl: pin-ctrl@d0200 { |
396 | compatible = "marvell,dove-pinctrl"; | |
5db26374 | 397 | reg = <0xd0200 0x14>, |
df76299f | 398 | <0xd0440 0x04>; |
0ad44659 SH |
399 | clocks = <&gate_clk 22>; |
400 | ||
401 | pmx_gpio_0: pmx-gpio-0 { | |
402 | marvell,pins = "mpp0"; | |
403 | marvell,function = "gpio"; | |
404 | }; | |
405 | ||
406 | pmx_gpio_1: pmx-gpio-1 { | |
407 | marvell,pins = "mpp1"; | |
408 | marvell,function = "gpio"; | |
409 | }; | |
410 | ||
411 | pmx_gpio_2: pmx-gpio-2 { | |
412 | marvell,pins = "mpp2"; | |
413 | marvell,function = "gpio"; | |
414 | }; | |
415 | ||
416 | pmx_gpio_3: pmx-gpio-3 { | |
417 | marvell,pins = "mpp3"; | |
418 | marvell,function = "gpio"; | |
419 | }; | |
420 | ||
421 | pmx_gpio_4: pmx-gpio-4 { | |
422 | marvell,pins = "mpp4"; | |
423 | marvell,function = "gpio"; | |
424 | }; | |
425 | ||
426 | pmx_gpio_5: pmx-gpio-5 { | |
427 | marvell,pins = "mpp5"; | |
428 | marvell,function = "gpio"; | |
429 | }; | |
430 | ||
431 | pmx_gpio_6: pmx-gpio-6 { | |
432 | marvell,pins = "mpp6"; | |
433 | marvell,function = "gpio"; | |
434 | }; | |
435 | ||
436 | pmx_gpio_7: pmx-gpio-7 { | |
437 | marvell,pins = "mpp7"; | |
438 | marvell,function = "gpio"; | |
439 | }; | |
440 | ||
441 | pmx_gpio_8: pmx-gpio-8 { | |
442 | marvell,pins = "mpp8"; | |
443 | marvell,function = "gpio"; | |
444 | }; | |
445 | ||
446 | pmx_gpio_9: pmx-gpio-9 { | |
447 | marvell,pins = "mpp9"; | |
448 | marvell,function = "gpio"; | |
449 | }; | |
450 | ||
451 | pmx_gpio_10: pmx-gpio-10 { | |
452 | marvell,pins = "mpp10"; | |
453 | marvell,function = "gpio"; | |
454 | }; | |
455 | ||
456 | pmx_gpio_11: pmx-gpio-11 { | |
457 | marvell,pins = "mpp11"; | |
458 | marvell,function = "gpio"; | |
459 | }; | |
460 | ||
461 | pmx_gpio_12: pmx-gpio-12 { | |
462 | marvell,pins = "mpp12"; | |
463 | marvell,function = "gpio"; | |
464 | }; | |
465 | ||
466 | pmx_gpio_13: pmx-gpio-13 { | |
467 | marvell,pins = "mpp13"; | |
468 | marvell,function = "gpio"; | |
469 | }; | |
470 | ||
34ea5342 JFM |
471 | pmx_audio1_extclk: pmx-audio1-extclk { |
472 | marvell,pins = "mpp13"; | |
473 | marvell,function = "audio1"; | |
474 | }; | |
475 | ||
0ad44659 SH |
476 | pmx_gpio_14: pmx-gpio-14 { |
477 | marvell,pins = "mpp14"; | |
478 | marvell,function = "gpio"; | |
479 | }; | |
480 | ||
481 | pmx_gpio_15: pmx-gpio-15 { | |
482 | marvell,pins = "mpp15"; | |
483 | marvell,function = "gpio"; | |
484 | }; | |
485 | ||
486 | pmx_gpio_16: pmx-gpio-16 { | |
487 | marvell,pins = "mpp16"; | |
488 | marvell,function = "gpio"; | |
489 | }; | |
490 | ||
491 | pmx_gpio_17: pmx-gpio-17 { | |
492 | marvell,pins = "mpp17"; | |
493 | marvell,function = "gpio"; | |
494 | }; | |
495 | ||
496 | pmx_gpio_18: pmx-gpio-18 { | |
497 | marvell,pins = "mpp18"; | |
498 | marvell,function = "gpio"; | |
499 | }; | |
500 | ||
501 | pmx_gpio_19: pmx-gpio-19 { | |
502 | marvell,pins = "mpp19"; | |
503 | marvell,function = "gpio"; | |
504 | }; | |
505 | ||
506 | pmx_gpio_20: pmx-gpio-20 { | |
507 | marvell,pins = "mpp20"; | |
508 | marvell,function = "gpio"; | |
509 | }; | |
510 | ||
511 | pmx_gpio_21: pmx-gpio-21 { | |
512 | marvell,pins = "mpp21"; | |
513 | marvell,function = "gpio"; | |
514 | }; | |
515 | ||
516 | pmx_camera: pmx-camera { | |
517 | marvell,pins = "mpp_camera"; | |
518 | marvell,function = "camera"; | |
519 | }; | |
520 | ||
521 | pmx_camera_gpio: pmx-camera-gpio { | |
522 | marvell,pins = "mpp_camera"; | |
523 | marvell,function = "gpio"; | |
524 | }; | |
525 | ||
526 | pmx_sdio0: pmx-sdio0 { | |
527 | marvell,pins = "mpp_sdio0"; | |
528 | marvell,function = "sdio0"; | |
529 | }; | |
530 | ||
531 | pmx_sdio0_gpio: pmx-sdio0-gpio { | |
532 | marvell,pins = "mpp_sdio0"; | |
533 | marvell,function = "gpio"; | |
534 | }; | |
535 | ||
536 | pmx_sdio1: pmx-sdio1 { | |
537 | marvell,pins = "mpp_sdio1"; | |
538 | marvell,function = "sdio1"; | |
539 | }; | |
540 | ||
541 | pmx_sdio1_gpio: pmx-sdio1-gpio { | |
542 | marvell,pins = "mpp_sdio1"; | |
543 | marvell,function = "gpio"; | |
544 | }; | |
545 | ||
546 | pmx_audio1_gpio: pmx-audio1-gpio { | |
547 | marvell,pins = "mpp_audio1"; | |
548 | marvell,function = "gpio"; | |
549 | }; | |
550 | ||
34ea5342 JFM |
551 | pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo { |
552 | marvell,pins = "mpp_audio1"; | |
553 | marvell,function = "i2s1/spdifo"; | |
554 | }; | |
555 | ||
0ad44659 SH |
556 | pmx_spi0: pmx-spi0 { |
557 | marvell,pins = "mpp_spi0"; | |
558 | marvell,function = "spi0"; | |
559 | }; | |
560 | ||
561 | pmx_spi0_gpio: pmx-spi0-gpio { | |
562 | marvell,pins = "mpp_spi0"; | |
563 | marvell,function = "gpio"; | |
564 | }; | |
565 | ||
566 | pmx_uart1: pmx-uart1 { | |
567 | marvell,pins = "mpp_uart1"; | |
568 | marvell,function = "uart1"; | |
569 | }; | |
570 | ||
571 | pmx_uart1_gpio: pmx-uart1-gpio { | |
572 | marvell,pins = "mpp_uart1"; | |
573 | marvell,function = "gpio"; | |
574 | }; | |
575 | ||
576 | pmx_nand: pmx-nand { | |
577 | marvell,pins = "mpp_nand"; | |
578 | marvell,function = "nand"; | |
579 | }; | |
580 | ||
581 | pmx_nand_gpo: pmx-nand-gpo { | |
582 | marvell,pins = "mpp_nand"; | |
583 | marvell,function = "gpo"; | |
584 | }; | |
585 | }; | |
586 | ||
b31b3211 JC |
587 | core_clk: core-clocks@d0214 { |
588 | compatible = "marvell,dove-core-clock"; | |
589 | reg = <0xd0214 0x4>; | |
590 | #clock-cells = <1>; | |
0ad44659 SH |
591 | }; |
592 | ||
b31b3211 JC |
593 | gpio0: gpio-ctrl@d0400 { |
594 | compatible = "marvell,orion-gpio"; | |
595 | #gpio-cells = <2>; | |
596 | gpio-controller; | |
597 | reg = <0xd0400 0x20>; | |
598 | ngpios = <32>; | |
599 | interrupt-controller; | |
600 | #interrupt-cells = <2>; | |
601 | interrupts = <12>, <13>, <14>, <60>; | |
0ad44659 SH |
602 | }; |
603 | ||
b31b3211 JC |
604 | gpio1: gpio-ctrl@d0420 { |
605 | compatible = "marvell,orion-gpio"; | |
606 | #gpio-cells = <2>; | |
607 | gpio-controller; | |
608 | reg = <0xd0420 0x20>; | |
609 | ngpios = <32>; | |
610 | interrupt-controller; | |
611 | #interrupt-cells = <2>; | |
612 | interrupts = <61>; | |
0ad44659 SH |
613 | }; |
614 | ||
615 | rtc: real-time-clock@d8500 { | |
616 | compatible = "marvell,orion-rtc"; | |
617 | reg = <0xd8500 0x20>; | |
618 | }; | |
619 | ||
7a98c18f SH |
620 | gconf: global-config@e802c { |
621 | compatible = "marvell,dove-global-config", | |
622 | "syscon"; | |
623 | reg = <0xe802c 0x14>; | |
624 | }; | |
625 | ||
b31b3211 JC |
626 | gpio2: gpio-ctrl@e8400 { |
627 | compatible = "marvell,orion-gpio"; | |
628 | #gpio-cells = <2>; | |
629 | gpio-controller; | |
630 | reg = <0xe8400 0x0c>; | |
631 | ngpios = <8>; | |
080972aa | 632 | }; |
4c3f6b86 | 633 | }; |
80a8b54b SH |
634 | }; |
635 | }; |