]>
Commit | Line | Data |
---|---|---|
c769eaf7 SS |
1 | // SPDX-License-Identifier: GPL-2.0 |
2 | /* | |
3 | * Samsung's Exynos4412 based Galaxy S3 board device tree source | |
4 | * | |
5 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. | |
6 | * http://www.samsung.com | |
7 | */ | |
8 | ||
9 | /dts-v1/; | |
10 | #include "exynos4412-midas.dtsi" | |
11 | ||
12 | / { | |
13 | aliases { | |
14 | i2c9 = &i2c_ak8975; | |
15 | i2c10 = &i2c_cm36651; | |
16 | }; | |
17 | ||
18 | regulators { | |
19 | lcd_vdd3_reg: voltage-regulator-2 { | |
20 | compatible = "regulator-fixed"; | |
21 | regulator-name = "LCD_VDD_2.2V"; | |
22 | regulator-min-microvolt = <2200000>; | |
23 | regulator-max-microvolt = <2200000>; | |
24 | gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; | |
25 | enable-active-high; | |
26 | }; | |
27 | ||
28 | ps_als_reg: voltage-regulator-5 { | |
29 | compatible = "regulator-fixed"; | |
30 | regulator-name = "LED_A_3.0V"; | |
31 | regulator-min-microvolt = <3000000>; | |
32 | regulator-max-microvolt = <3000000>; | |
33 | gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; | |
34 | enable-active-high; | |
35 | }; | |
36 | }; | |
37 | ||
38 | i2c_ak8975: i2c-gpio-0 { | |
39 | compatible = "i2c-gpio"; | |
40 | gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; | |
41 | i2c-gpio,delay-us = <2>; | |
42 | #address-cells = <1>; | |
43 | #size-cells = <0>; | |
44 | status = "okay"; | |
45 | ||
46 | ak8975@c { | |
47 | compatible = "asahi-kasei,ak8975"; | |
48 | reg = <0x0c>; | |
49 | gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; | |
50 | }; | |
51 | }; | |
52 | ||
53 | i2c_cm36651: i2c-gpio-2 { | |
54 | compatible = "i2c-gpio"; | |
55 | gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; | |
56 | i2c-gpio,delay-us = <2>; | |
57 | #address-cells = <1>; | |
58 | #size-cells = <0>; | |
59 | ||
60 | cm36651@18 { | |
61 | compatible = "capella,cm36651"; | |
62 | reg = <0x18>; | |
63 | interrupt-parent = <&gpx0>; | |
64 | interrupts = <2 IRQ_TYPE_EDGE_FALLING>; | |
65 | vled-supply = <&ps_als_reg>; | |
66 | }; | |
67 | }; | |
68 | }; | |
69 | ||
70 | &buck9_reg { | |
71 | maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; | |
72 | }; | |
73 | ||
74 | &cam_af_reg { | |
75 | gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; | |
76 | status = "okay"; | |
77 | }; | |
78 | ||
79 | &cam_io_reg { | |
80 | gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; | |
81 | status = "okay"; | |
82 | }; | |
83 | ||
84 | &dsi_0 { | |
85 | status = "okay"; | |
86 | ||
87 | panel@0 { | |
88 | compatible = "samsung,s6e8aa0"; | |
89 | reg = <0>; | |
90 | vdd3-supply = <&lcd_vdd3_reg>; | |
91 | vci-supply = <&ldo25_reg>; | |
92 | reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; | |
93 | power-on-delay= <50>; | |
94 | reset-delay = <100>; | |
95 | init-delay = <100>; | |
96 | flip-horizontal; | |
97 | flip-vertical; | |
98 | panel-width-mm = <58>; | |
99 | panel-height-mm = <103>; | |
100 | ||
101 | display-timings { | |
102 | timing-0 { | |
103 | clock-frequency = <57153600>; | |
104 | hactive = <720>; | |
105 | vactive = <1280>; | |
106 | hfront-porch = <5>; | |
107 | hback-porch = <5>; | |
108 | hsync-len = <5>; | |
109 | vfront-porch = <13>; | |
110 | vback-porch = <1>; | |
111 | vsync-len = <2>; | |
112 | }; | |
113 | }; | |
114 | }; | |
115 | }; | |
116 | ||
117 | &i2c_3 { | |
118 | mms114-touchscreen@48 { | |
119 | compatible = "melfas,mms114"; | |
120 | reg = <0x48>; | |
121 | interrupt-parent = <&gpm2>; | |
122 | interrupts = <3 IRQ_TYPE_EDGE_FALLING>; | |
123 | x-size = <720>; | |
124 | y-size = <1280>; | |
125 | avdd-supply = <&ldo23_reg>; | |
126 | vdd-supply = <&ldo24_reg>; | |
127 | }; | |
128 | }; | |
129 | ||
130 | &ldo25_reg { | |
131 | regulator-name = "LCD_VCC_3.3V"; | |
132 | regulator-min-microvolt = <2800000>; | |
133 | regulator-max-microvolt = <2800000>; | |
134 | }; | |
135 | ||
136 | &s5c73m3 { | |
137 | standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ | |
138 | vdda-supply = <&ldo17_reg>; | |
139 | status = "okay"; | |
140 | }; |