]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/blame - arch/arm/boot/dts/exynos4412-midas.dtsi
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / exynos4412-midas.dtsi
CommitLineData
c769eaf7
SS
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos4412 based Trats 2 board device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 *
8 * Device tree source file for Samsung's Trats 2 board which is based on
9 * Samsung's Exynos4412 SoC.
10 */
11
12/dts-v1/;
13#include "exynos4412.dtsi"
14#include "exynos4412-ppmu-common.dtsi"
15#include <dt-bindings/gpio/gpio.h>
16#include <dt-bindings/interrupt-controller/irq.h>
17#include <dt-bindings/clock/maxim,max77686.h>
18#include <dt-bindings/pinctrl/samsung.h>
19
20/ {
21 compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
22
23 aliases {
24 i2c11 = &i2c_max77693;
25 i2c12 = &i2c_max77693_fuel;
26 };
27
28 chosen {
29 stdout-path = &serial_2;
30 };
31
32 firmware@204f000 {
33 compatible = "samsung,secure-firmware";
34 reg = <0x0204F000 0x1000>;
35 };
36
37 fixed-rate-clocks {
38 xxti {
39 compatible = "samsung,clock-xxti", "fixed-clock";
40 clock-frequency = <0>;
41 };
42
43 xusbxti {
44 compatible = "samsung,clock-xusbxti", "fixed-clock";
45 clock-frequency = <24000000>;
46 };
47 };
48
33b9e719
KK
49 cam_io_reg: voltage-regulator-1 {
50 compatible = "regulator-fixed";
51 regulator-name = "CAM_SENSOR_A";
52 regulator-min-microvolt = <2800000>;
53 regulator-max-microvolt = <2800000>;
54 enable-active-high;
55 status = "disabled";
56 };
c769eaf7 57
ca1378d1 58 cam_af_reg: voltage-regulator-2 {
33b9e719
KK
59 compatible = "regulator-fixed";
60 regulator-name = "CAM_AF";
61 regulator-min-microvolt = <2800000>;
62 regulator-max-microvolt = <2800000>;
63 enable-active-high;
64 status = "disabled";
65 };
c769eaf7 66
ca1378d1 67 vsil12: voltage-regulator-3 {
33b9e719
KK
68 compatible = "regulator-fixed";
69 regulator-name = "VSIL_1.2V";
70 regulator-min-microvolt = <1200000>;
71 regulator-max-microvolt = <1200000>;
72 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
73 enable-active-high;
74 vin-supply = <&buck7_reg>;
75 };
c769eaf7 76
ca1378d1 77 vcc33mhl: voltage-regulator-4 {
33b9e719
KK
78 compatible = "regulator-fixed";
79 regulator-name = "VCC_3.3_MHL";
80 regulator-min-microvolt = <3300000>;
81 regulator-max-microvolt = <3300000>;
82 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
83 enable-active-high;
84 };
c769eaf7 85
ca1378d1 86 vcc18mhl: voltage-regulator-5 {
33b9e719
KK
87 compatible = "regulator-fixed";
88 regulator-name = "VCC_1.8_MHL";
89 regulator-min-microvolt = <1800000>;
90 regulator-max-microvolt = <1800000>;
91 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
92 enable-active-high;
c769eaf7
SS
93 };
94
95 gpio-keys {
96 compatible = "gpio-keys";
492413dd
SS
97 pinctrl-names = "default";
98 pinctrl-0 = <&gpio_keys>;
c769eaf7
SS
99
100 key-down {
101 gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
102 linux,code = <114>;
103 label = "volume down";
104 debounce-interval = <10>;
105 };
106
107 key-up {
108 gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
109 linux,code = <115>;
110 label = "volume up";
111 debounce-interval = <10>;
112 };
113
114 key-power {
115 gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
116 linux,code = <116>;
117 label = "power";
118 debounce-interval = <10>;
119 wakeup-source;
120 };
121
122 key-ok {
123 gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
124 linux,code = <139>;
125 label = "ok";
0076096b 126 debounce-interval = <10>;
c769eaf7
SS
127 wakeup-source;
128 };
129 };
130
131 i2c_max77693: i2c-gpio-1 {
132 compatible = "i2c-gpio";
133 gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
134 i2c-gpio,delay-us = <2>;
135 #address-cells = <1>;
136 #size-cells = <0>;
137 status = "okay";
138
139 max77693@66 {
140 compatible = "maxim,max77693";
141 interrupt-parent = <&gpx1>;
142 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
43efe4fa
SS
143 pinctrl-names = "default";
144 pinctrl-0 = <&max77693_irq>;
c769eaf7
SS
145 reg = <0x66>;
146
147 regulators {
148 esafeout1_reg: ESAFEOUT1 {
149 regulator-name = "ESAFEOUT1";
150 };
151 esafeout2_reg: ESAFEOUT2 {
152 regulator-name = "ESAFEOUT2";
153 };
154 charger_reg: CHARGER {
155 regulator-name = "CHARGER";
156 regulator-min-microamp = <60000>;
157 regulator-max-microamp = <2580000>;
158 };
159 };
160
161 max77693_haptic {
162 compatible = "maxim,max77693-haptic";
163 haptic-supply = <&ldo26_reg>;
164 pwms = <&pwm 0 38022 0>;
165 };
166
167 charger {
168 compatible = "maxim,max77693-charger";
169
170 maxim,constant-microvolt = <4350000>;
171 maxim,min-system-microvolt = <3600000>;
172 maxim,thermal-regulation-celsius = <100>;
173 maxim,battery-overcurrent-microamp = <3500000>;
174 maxim,charge-input-threshold-microvolt = <4300000>;
175 };
176 };
177 };
178
179 i2c_max77693_fuel: i2c-gpio-3 {
180 compatible = "i2c-gpio";
181 gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
182 i2c-gpio,delay-us = <2>;
183 #address-cells = <1>;
184 #size-cells = <0>;
185 status = "okay";
186
187 max77693-fuel-gauge@36 {
188 compatible = "maxim,max17047";
189 interrupt-parent = <&gpx2>;
190 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
e2bae133
SS
191 pinctrl-names = "default";
192 pinctrl-0 = <&max77693_fuel_irq>;
c769eaf7
SS
193 reg = <0x36>;
194
195 maxim,over-heat-temp = <700>;
196 maxim,over-volt = <4500>;
197 };
198 };
199
200 i2c-mhl {
201 compatible = "i2c-gpio";
202 gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
203 i2c-gpio,delay-us = <100>;
204 #address-cells = <1>;
205 #size-cells = <0>;
206
207 pinctrl-0 = <&i2c_mhl_bus>;
208 pinctrl-names = "default";
209 status = "okay";
210
211 sii9234: hdmi-bridge@39 {
212 compatible = "sil,sii9234";
213 avcc33-supply = <&vcc33mhl>;
214 iovcc18-supply = <&vcc18mhl>;
215 avcc12-supply = <&vsil12>;
216 cvcc12-supply = <&vsil12>;
217 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
218 interrupt-parent = <&gpf3>;
219 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
220 reg = <0x39>;
221
222 port {
223 mhl_to_hdmi: endpoint {
224 remote-endpoint = <&hdmi_to_mhl>;
225 };
226 };
227 };
228 };
229
230 wlan_pwrseq: sdhci3-pwrseq {
231 compatible = "mmc-pwrseq-simple";
232 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
233 clocks = <&max77686 MAX77686_CLK_PMIC>;
234 clock-names = "ext_clock";
235 };
236
237 sound {
238 compatible = "samsung,trats2-audio";
239 samsung,i2s-controller = <&i2s0>;
240 samsung,model = "Trats2";
241 samsung,audio-codec = <&wm1811>;
242 samsung,audio-routing =
243 "SPK", "SPKOUTLN",
244 "SPK", "SPKOUTLP",
245 "SPK", "SPKOUTRN",
246 "SPK", "SPKOUTRP";
247 };
248
249 thermistor-ap {
250 compatible = "murata,ncp15wb473";
251 pullup-uv = <1800000>; /* VCC_1.8V_AP */
252 pullup-ohm = <100000>; /* 100K */
253 pulldown-ohm = <100000>; /* 100K */
254 io-channels = <&adc 1>; /* AP temperature */
255 };
256
257 thermistor-battery {
258 compatible = "murata,ncp15wb473";
259 pullup-uv = <1800000>; /* VCC_1.8V_AP */
260 pullup-ohm = <100000>; /* 100K */
261 pulldown-ohm = <100000>; /* 100K */
262 io-channels = <&adc 2>; /* Battery temperature */
263 };
264
265 thermal-zones {
266 cpu_thermal: cpu-thermal {
267 cooling-maps {
268 map0 {
269 /* Corresponds to 800MHz at freq_table */
270 cooling-device = <&cpu0 7 7>;
271 };
272 map1 {
273 /* Corresponds to 200MHz at freq_table */
274 cooling-device = <&cpu0 13 13>;
275 };
276 };
277 };
278 };
279};
280
281&adc {
282 vdd-supply = <&ldo3_reg>;
283 status = "okay";
284};
285
286&bus_dmc {
287 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
288 vdd-supply = <&buck1_reg>;
289 status = "okay";
290};
291
292&bus_acp {
293 devfreq = <&bus_dmc>;
294 status = "okay";
295};
296
297&bus_c2c {
298 devfreq = <&bus_dmc>;
299 status = "okay";
300};
301
302&bus_leftbus {
303 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
304 vdd-supply = <&buck3_reg>;
305 status = "okay";
306};
307
308&bus_rightbus {
309 devfreq = <&bus_leftbus>;
310 status = "okay";
311};
312
313&bus_display {
314 devfreq = <&bus_leftbus>;
315 status = "okay";
316};
317
318&bus_fsys {
319 devfreq = <&bus_leftbus>;
320 status = "okay";
321};
322
323&bus_peri {
324 devfreq = <&bus_leftbus>;
325 status = "okay";
326};
327
328&bus_mfc {
329 devfreq = <&bus_leftbus>;
330 status = "okay";
331};
332
333&camera {
334 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
335 pinctrl-names = "default";
336 status = "okay";
337 assigned-clocks = <&clock CLK_MOUT_CAM0>,
338 <&clock CLK_MOUT_CAM1>;
339 assigned-clock-parents = <&clock CLK_XUSBXTI>,
340 <&clock CLK_XUSBXTI>;
341};
342
343&cpu0 {
344 cpu0-supply = <&buck2_reg>;
345};
346
347&csis_0 {
348 status = "okay";
349 vddcore-supply = <&ldo8_reg>;
350 vddio-supply = <&ldo10_reg>;
351 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
352 <&clock CLK_SCLK_CSIS0>;
353 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
354 assigned-clock-rates = <0>, <176000000>;
355
356 /* Camera C (3) MIPI CSI-2 (CSIS0) */
357 port@3 {
358 reg = <3>;
359 csis0_ep: endpoint {
360 remote-endpoint = <&s5c73m3_ep>;
361 data-lanes = <1 2 3 4>;
362 samsung,csis-hs-settle = <12>;
363 };
364 };
365};
366
367&csis_1 {
368 status = "okay";
369 vddcore-supply = <&ldo8_reg>;
370 vddio-supply = <&ldo10_reg>;
371 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
372 <&clock CLK_SCLK_CSIS1>;
373 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
374 assigned-clock-rates = <0>, <176000000>;
375
376 /* Camera D (4) MIPI CSI-2 (CSIS1) */
377 port@4 {
378 reg = <4>;
379 csis1_ep: endpoint {
380 remote-endpoint = <&is_s5k6a3_ep>;
381 data-lanes = <1>;
382 samsung,csis-hs-settle = <18>;
383 samsung,csis-wclk;
384 };
385 };
386};
387
388&dsi_0 {
389 vddcore-supply = <&ldo8_reg>;
390 vddio-supply = <&ldo10_reg>;
391 samsung,burst-clock-frequency = <500000000>;
392 samsung,esc-clock-frequency = <20000000>;
393 samsung,pll-clock-frequency = <24000000>;
394};
395
396&exynos_usbphy {
397 vbus-supply = <&esafeout1_reg>;
398 status = "okay";
399};
400
401&fimc_0 {
402 status = "okay";
403 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
404 <&clock CLK_SCLK_FIMC0>;
405 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
406 assigned-clock-rates = <0>, <176000000>;
407};
408
409&fimc_1 {
410 status = "okay";
411 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
412 <&clock CLK_SCLK_FIMC1>;
413 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
414 assigned-clock-rates = <0>, <176000000>;
415};
416
417&fimc_2 {
418 status = "okay";
419 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
420 <&clock CLK_SCLK_FIMC2>;
421 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
422 assigned-clock-rates = <0>, <176000000>;
423};
424
425&fimc_3 {
426 status = "okay";
427 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
428 <&clock CLK_SCLK_FIMC3>;
429 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
430 assigned-clock-rates = <0>, <176000000>;
431};
432
433&fimc_is {
434 pinctrl-0 = <&fimc_is_uart>;
435 pinctrl-names = "default";
436 status = "okay";
437
438 };
439
440&fimc_lite_0 {
441 status = "okay";
442};
443
444&fimc_lite_1 {
445 status = "okay";
446};
447
448&fimd {
449 status = "okay";
450};
451
452&hdmi {
453 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
454 pinctrl-names = "default";
455 pinctrl-0 = <&hdmi_hpd>;
456 vdd-supply = <&ldo3_reg>;
457 vdd_osc-supply = <&ldo4_reg>;
458 vdd_pll-supply = <&ldo3_reg>;
459 ddc = <&i2c_5>;
460 status = "okay";
461
462 ports {
463 #address-cells = <1>;
464 #size-cells = <0>;
465
466 port@1 {
467 reg = <1>;
468 hdmi_to_mhl: endpoint {
469 remote-endpoint = <&mhl_to_hdmi>;
470 };
471 };
472 };
473};
474
475&hsotg {
476 vusb_d-supply = <&ldo15_reg>;
477 vusb_a-supply = <&ldo12_reg>;
478 dr_mode = "peripheral";
479 status = "okay";
480};
481
482&i2c_0 {
483 samsung,i2c-sda-delay = <100>;
484 samsung,i2c-slave-addr = <0x10>;
485 samsung,i2c-max-bus-freq = <400000>;
486 pinctrl-0 = <&i2c0_bus>;
487 pinctrl-names = "default";
488 status = "okay";
489
490 s5c73m3: s5c73m3@3c {
491 compatible = "samsung,s5c73m3";
492 reg = <0x3c>;
493 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
494 vdd-int-supply = <&buck9_reg>;
495 vddio-cis-supply = <&ldo9_reg>;
496 vddio-host-supply = <&ldo18_reg>;
497 vdd-af-supply = <&cam_af_reg>;
498 vdd-reg-supply = <&cam_io_reg>;
499 clock-frequency = <24000000>;
500 /* CAM_A_CLKOUT */
501 clocks = <&camera 0>;
502 clock-names = "cis_extclk";
503 status = "disabled";
504 port {
505 s5c73m3_ep: endpoint {
506 remote-endpoint = <&csis0_ep>;
507 data-lanes = <1 2 3 4>;
508 };
509 };
510 };
511};
512
513&i2c1_isp {
514 pinctrl-0 = <&fimc_is_i2c1>;
515 pinctrl-names = "default";
516
517 s5k6a3@10 {
518 compatible = "samsung,s5k6a3";
519 reg = <0x10>;
520 svdda-supply = <&cam_io_reg>;
521 svddio-supply = <&ldo19_reg>;
522 afvdd-supply = <&ldo19_reg>;
523 clock-frequency = <24000000>;
524 /* CAM_B_CLKOUT */
525 clocks = <&camera 1>;
526 clock-names = "extclk";
527 samsung,camclk-out = <1>;
528 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
529
530 port {
531 is_s5k6a3_ep: endpoint {
532 remote-endpoint = <&csis1_ep>;
533 data-lanes = <1>;
534 };
535 };
536 };
537};
538
539&i2c_3 {
540 samsung,i2c-sda-delay = <100>;
541 samsung,i2c-slave-addr = <0x10>;
542 samsung,i2c-max-bus-freq = <400000>;
543 pinctrl-0 = <&i2c3_bus>;
544 pinctrl-names = "default";
545 status = "okay";
546};
547
548&i2c_4 {
549 samsung,i2c-sda-delay = <100>;
550 samsung,i2c-slave-addr = <0x10>;
551 samsung,i2c-max-bus-freq = <100000>;
552 pinctrl-0 = <&i2c4_bus>;
553 pinctrl-names = "default";
554 status = "okay";
555
556 wm1811: wm1811@1a {
557 compatible = "wlf,wm1811";
558 reg = <0x1a>;
559 clocks = <&pmu_system_controller 0>;
560 clock-names = "MCLK1";
561 DCVDD-supply = <&ldo3_reg>;
562 DBVDD1-supply = <&ldo3_reg>;
563 wlf,ldo1ena = <&gpj0 4 0>;
564 };
565};
566
567&i2c_5 {
568 status = "okay";
569};
570
571&i2c_7 {
572 samsung,i2c-sda-delay = <100>;
573 samsung,i2c-slave-addr = <0x10>;
574 samsung,i2c-max-bus-freq = <100000>;
575 pinctrl-0 = <&i2c7_bus>;
576 pinctrl-names = "default";
577 status = "okay";
578
579 max77686: max77686_pmic@9 {
580 compatible = "maxim,max77686";
581 interrupt-parent = <&gpx0>;
582 interrupts = <7 IRQ_TYPE_NONE>;
73d2f794
SS
583 pinctrl-0 = <&max77686_irq>;
584 pinctrl-names = "default";
c769eaf7
SS
585 reg = <0x09>;
586 #clock-cells = <1>;
587
588 voltage-regulators {
589 ldo1_reg: LDO1 {
590 regulator-name = "VALIVE_1.0V_AP";
591 regulator-min-microvolt = <1000000>;
592 regulator-max-microvolt = <1000000>;
593 regulator-always-on;
594 };
595
596 ldo2_reg: LDO2 {
597 regulator-name = "VM1M2_1.2V_AP";
598 regulator-min-microvolt = <1200000>;
599 regulator-max-microvolt = <1200000>;
600 regulator-always-on;
601 regulator-state-mem {
602 regulator-on-in-suspend;
603 };
604 };
605
606 ldo3_reg: LDO3 {
607 regulator-name = "VCC_1.8V_AP";
608 regulator-min-microvolt = <1800000>;
609 regulator-max-microvolt = <1800000>;
610 regulator-always-on;
611 };
612
613 ldo4_reg: LDO4 {
614 regulator-name = "VCC_2.8V_AP";
615 regulator-min-microvolt = <2800000>;
616 regulator-max-microvolt = <2800000>;
617 regulator-always-on;
618 };
619
620 ldo5_reg: LDO5 {
621 regulator-name = "VCC_1.8V_IO";
622 regulator-min-microvolt = <1800000>;
623 regulator-max-microvolt = <1800000>;
624 regulator-always-on;
625 };
626
627 ldo6_reg: LDO6 {
628 regulator-name = "VMPLL_1.0V_AP";
629 regulator-min-microvolt = <1000000>;
630 regulator-max-microvolt = <1000000>;
631 regulator-always-on;
632 regulator-state-mem {
633 regulator-on-in-suspend;
634 };
635 };
636
637 ldo7_reg: LDO7 {
638 regulator-name = "VPLL_1.0V_AP";
639 regulator-min-microvolt = <1000000>;
640 regulator-max-microvolt = <1000000>;
641 regulator-always-on;
642 regulator-state-mem {
643 regulator-on-in-suspend;
644 };
645 };
646
647 ldo8_reg: LDO8 {
648 regulator-name = "VMIPI_1.0V";
649 regulator-min-microvolt = <1000000>;
650 regulator-max-microvolt = <1000000>;
651 regulator-state-mem {
652 regulator-off-in-suspend;
653 };
654 };
655
656 ldo9_reg: LDO9 {
657 regulator-name = "CAM_ISP_MIPI_1.2V";
658 regulator-min-microvolt = <1200000>;
659 regulator-max-microvolt = <1200000>;
660 };
661
662 ldo10_reg: LDO10 {
663 regulator-name = "VMIPI_1.8V";
664 regulator-min-microvolt = <1800000>;
665 regulator-max-microvolt = <1800000>;
666 regulator-state-mem {
667 regulator-off-in-suspend;
668 };
669 };
670
671 ldo11_reg: LDO11 {
672 regulator-name = "VABB1_1.95V";
673 regulator-min-microvolt = <1950000>;
674 regulator-max-microvolt = <1950000>;
675 regulator-always-on;
676 regulator-state-mem {
677 regulator-off-in-suspend;
678 };
679 };
680
681 ldo12_reg: LDO12 {
682 regulator-name = "VUOTG_3.0V";
683 regulator-min-microvolt = <3000000>;
684 regulator-max-microvolt = <3000000>;
685 regulator-state-mem {
686 regulator-off-in-suspend;
687 };
688 };
689
690 ldo13_reg: LDO13 {
691 regulator-name = "NFC_AVDD_1.8V";
692 regulator-min-microvolt = <1800000>;
693 regulator-max-microvolt = <1800000>;
694 };
695
696 ldo14_reg: LDO14 {
697 regulator-name = "VABB2_1.95V";
698 regulator-min-microvolt = <1950000>;
699 regulator-max-microvolt = <1950000>;
700 regulator-always-on;
701 regulator-state-mem {
702 regulator-off-in-suspend;
703 };
704 };
705
706 ldo15_reg: LDO15 {
707 regulator-name = "VHSIC_1.0V";
708 regulator-min-microvolt = <1000000>;
709 regulator-max-microvolt = <1000000>;
710 regulator-state-mem {
711 regulator-on-in-suspend;
712 };
713 };
714
715 ldo16_reg: LDO16 {
716 regulator-name = "VHSIC_1.8V";
717 regulator-min-microvolt = <1800000>;
718 regulator-max-microvolt = <1800000>;
719 regulator-state-mem {
720 regulator-on-in-suspend;
721 };
722 };
723
724 ldo17_reg: LDO17 {
725 regulator-name = "CAM_SENSOR_CORE_1.2V";
726 regulator-min-microvolt = <1200000>;
727 regulator-max-microvolt = <1200000>;
728 };
729
730 ldo18_reg: LDO18 {
731 regulator-name = "CAM_ISP_SEN_IO_1.8V";
732 regulator-min-microvolt = <1800000>;
733 regulator-max-microvolt = <1800000>;
734 };
735
736 ldo19_reg: LDO19 {
737 regulator-name = "VT_CAM_1.8V";
738 regulator-min-microvolt = <1800000>;
739 regulator-max-microvolt = <1800000>;
740 };
741
742 ldo20_reg: LDO20 {
743 regulator-name = "VDDQ_PRE_1.8V";
744 regulator-min-microvolt = <1800000>;
745 regulator-max-microvolt = <1800000>;
746 };
747
748 ldo21_reg: LDO21 {
749 regulator-name = "VTF_2.8V";
750 regulator-min-microvolt = <2800000>;
751 regulator-max-microvolt = <2800000>;
752 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
753 };
754
755 ldo22_reg: LDO22 {
756 regulator-name = "VMEM_VDD_2.8V";
757 regulator-min-microvolt = <2800000>;
758 regulator-max-microvolt = <2800000>;
759 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
760 };
761
762 ldo23_reg: LDO23 {
763 regulator-name = "TSP_AVDD_3.3V";
764 regulator-min-microvolt = <3300000>;
765 regulator-max-microvolt = <3300000>;
766 };
767
768 ldo24_reg: LDO24 {
769 regulator-name = "TSP_VDD_1.8V";
770 regulator-min-microvolt = <1800000>;
771 regulator-max-microvolt = <1800000>;
772 };
773
774 ldo25_reg: LDO25 {
775 regulator-name = "LDO25";
776 };
777
778 ldo26_reg: LDO26 {
779 regulator-name = "MOTOR_VCC_3.0V";
780 regulator-min-microvolt = <3000000>;
781 regulator-max-microvolt = <3000000>;
782 };
783
784 buck1_reg: BUCK1 {
785 regulator-name = "vdd_mif";
786 regulator-min-microvolt = <850000>;
787 regulator-max-microvolt = <1100000>;
788 regulator-always-on;
789 regulator-boot-on;
790 regulator-state-mem {
791 regulator-off-in-suspend;
792 };
793 };
794
795 buck2_reg: BUCK2 {
796 regulator-name = "vdd_arm";
797 regulator-min-microvolt = <850000>;
798 regulator-max-microvolt = <1500000>;
799 regulator-always-on;
800 regulator-boot-on;
801 regulator-state-mem {
802 regulator-on-in-suspend;
803 };
804 };
805
806 buck3_reg: BUCK3 {
807 regulator-name = "vdd_int";
808 regulator-min-microvolt = <850000>;
809 regulator-max-microvolt = <1150000>;
810 regulator-always-on;
811 regulator-boot-on;
812 regulator-state-mem {
813 regulator-off-in-suspend;
814 };
815 };
816
817 buck4_reg: BUCK4 {
818 regulator-name = "vdd_g3d";
819 regulator-min-microvolt = <850000>;
820 regulator-max-microvolt = <1150000>;
821 regulator-boot-on;
822 regulator-state-mem {
823 regulator-off-in-suspend;
824 };
825 };
826
827 buck5_reg: BUCK5 {
828 regulator-name = "VMEM_1.2V_AP";
829 regulator-min-microvolt = <1200000>;
830 regulator-max-microvolt = <1200000>;
831 regulator-always-on;
832 };
833
834 buck6_reg: BUCK6 {
835 regulator-name = "VCC_SUB_1.35V";
836 regulator-min-microvolt = <1350000>;
837 regulator-max-microvolt = <1350000>;
838 regulator-always-on;
839 };
840
841 buck7_reg: BUCK7 {
842 regulator-name = "VCC_SUB_2.0V";
843 regulator-min-microvolt = <2000000>;
844 regulator-max-microvolt = <2000000>;
845 regulator-always-on;
846 };
847
848 buck8_reg: BUCK8 {
849 regulator-name = "VMEM_VDDF_3.0V";
850 regulator-min-microvolt = <2850000>;
851 regulator-max-microvolt = <2850000>;
852 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
853 };
854
855 buck9_reg: BUCK9 {
856 regulator-name = "CAM_ISP_CORE_1.2V";
857 regulator-min-microvolt = <1000000>;
858 regulator-max-microvolt = <1200000>;
859 };
860 };
861 };
862};
863
864&i2c_8 {
865 status = "okay";
866};
867
868&i2s0 {
869 pinctrl-0 = <&i2s0_bus>;
870 pinctrl-names = "default";
871 status = "okay";
872};
873
874&mixer {
875 status = "okay";
876};
877
878&mshc_0 {
879 broken-cd;
880 non-removable;
881 card-detect-delay = <200>;
882 vmmc-supply = <&ldo22_reg>;
883 clock-frequency = <400000000>;
884 samsung,dw-mshc-ciu-div = <0>;
885 samsung,dw-mshc-sdr-timing = <2 3>;
886 samsung,dw-mshc-ddr-timing = <1 2>;
887 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
888 pinctrl-names = "default";
889 status = "okay";
890 bus-width = <8>;
891 cap-mmc-highspeed;
892};
893
894&pmu_system_controller {
895 assigned-clocks = <&pmu_system_controller 0>;
896 assigned-clock-parents = <&clock CLK_XUSBXTI>;
897};
898
899&pinctrl_0 {
900 pinctrl-names = "default";
901 pinctrl-0 = <&sleep0>;
902
903 mhl_int: mhl-int {
904 samsung,pins = "gpf3-5";
905 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
906 };
907
908 i2c_mhl_bus: i2c-mhl-bus {
909 samsung,pins = "gpf0-4", "gpf0-6";
910 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
911 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
912 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
913 };
914
915 sleep0: sleep-states {
916 PIN_SLP(gpa0-0, INPUT, NONE);
917 PIN_SLP(gpa0-1, OUT0, NONE);
918 PIN_SLP(gpa0-2, INPUT, NONE);
919 PIN_SLP(gpa0-3, INPUT, UP);
920 PIN_SLP(gpa0-4, INPUT, NONE);
921 PIN_SLP(gpa0-5, INPUT, DOWN);
922 PIN_SLP(gpa0-6, INPUT, DOWN);
923 PIN_SLP(gpa0-7, INPUT, UP);
924
925 PIN_SLP(gpa1-0, INPUT, DOWN);
926 PIN_SLP(gpa1-1, INPUT, DOWN);
927 PIN_SLP(gpa1-2, INPUT, DOWN);
928 PIN_SLP(gpa1-3, INPUT, DOWN);
929 PIN_SLP(gpa1-4, INPUT, DOWN);
930 PIN_SLP(gpa1-5, INPUT, DOWN);
931
932 PIN_SLP(gpb-0, INPUT, NONE);
933 PIN_SLP(gpb-1, INPUT, NONE);
934 PIN_SLP(gpb-2, INPUT, NONE);
935 PIN_SLP(gpb-3, INPUT, NONE);
936 PIN_SLP(gpb-4, INPUT, DOWN);
937 PIN_SLP(gpb-5, INPUT, UP);
938 PIN_SLP(gpb-6, INPUT, DOWN);
939 PIN_SLP(gpb-7, INPUT, DOWN);
940
941 PIN_SLP(gpc0-0, INPUT, DOWN);
942 PIN_SLP(gpc0-1, INPUT, DOWN);
943 PIN_SLP(gpc0-2, INPUT, DOWN);
944 PIN_SLP(gpc0-3, INPUT, DOWN);
945 PIN_SLP(gpc0-4, INPUT, DOWN);
946
947 PIN_SLP(gpc1-0, INPUT, NONE);
948 PIN_SLP(gpc1-1, PREV, NONE);
949 PIN_SLP(gpc1-2, INPUT, NONE);
950 PIN_SLP(gpc1-3, INPUT, NONE);
951 PIN_SLP(gpc1-4, INPUT, NONE);
952
953 PIN_SLP(gpd0-0, INPUT, DOWN);
954 PIN_SLP(gpd0-1, INPUT, DOWN);
955 PIN_SLP(gpd0-2, INPUT, NONE);
956 PIN_SLP(gpd0-3, INPUT, NONE);
957
958 PIN_SLP(gpd1-0, INPUT, DOWN);
959 PIN_SLP(gpd1-1, INPUT, DOWN);
960 PIN_SLP(gpd1-2, INPUT, NONE);
961 PIN_SLP(gpd1-3, INPUT, NONE);
962
963 PIN_SLP(gpf0-0, INPUT, NONE);
964 PIN_SLP(gpf0-1, INPUT, NONE);
965 PIN_SLP(gpf0-2, INPUT, DOWN);
966 PIN_SLP(gpf0-3, INPUT, DOWN);
967 PIN_SLP(gpf0-4, INPUT, NONE);
968 PIN_SLP(gpf0-5, INPUT, DOWN);
969 PIN_SLP(gpf0-6, INPUT, NONE);
970 PIN_SLP(gpf0-7, INPUT, DOWN);
971
972 PIN_SLP(gpf1-0, INPUT, DOWN);
973 PIN_SLP(gpf1-1, INPUT, DOWN);
974 PIN_SLP(gpf1-2, INPUT, DOWN);
975 PIN_SLP(gpf1-3, INPUT, DOWN);
976 PIN_SLP(gpf1-4, INPUT, NONE);
977 PIN_SLP(gpf1-5, INPUT, NONE);
978 PIN_SLP(gpf1-6, INPUT, DOWN);
979 PIN_SLP(gpf1-7, PREV, NONE);
980
981 PIN_SLP(gpf2-0, PREV, NONE);
982 PIN_SLP(gpf2-1, INPUT, DOWN);
983 PIN_SLP(gpf2-2, INPUT, DOWN);
984 PIN_SLP(gpf2-3, INPUT, DOWN);
985 PIN_SLP(gpf2-4, INPUT, DOWN);
986 PIN_SLP(gpf2-5, INPUT, DOWN);
987 PIN_SLP(gpf2-6, INPUT, NONE);
988 PIN_SLP(gpf2-7, INPUT, NONE);
989
990 PIN_SLP(gpf3-0, INPUT, NONE);
991 PIN_SLP(gpf3-1, PREV, NONE);
992 PIN_SLP(gpf3-2, PREV, NONE);
993 PIN_SLP(gpf3-3, PREV, NONE);
994 PIN_SLP(gpf3-4, OUT1, NONE);
995 PIN_SLP(gpf3-5, INPUT, DOWN);
996
997 PIN_SLP(gpj0-0, PREV, NONE);
998 PIN_SLP(gpj0-1, PREV, NONE);
999 PIN_SLP(gpj0-2, PREV, NONE);
1000 PIN_SLP(gpj0-3, INPUT, DOWN);
1001 PIN_SLP(gpj0-4, PREV, NONE);
1002 PIN_SLP(gpj0-5, PREV, NONE);
1003 PIN_SLP(gpj0-6, INPUT, DOWN);
1004 PIN_SLP(gpj0-7, INPUT, DOWN);
1005
1006 PIN_SLP(gpj1-0, INPUT, DOWN);
1007 PIN_SLP(gpj1-1, PREV, NONE);
1008 PIN_SLP(gpj1-2, PREV, NONE);
1009 PIN_SLP(gpj1-3, INPUT, DOWN);
1010 PIN_SLP(gpj1-4, INPUT, DOWN);
1011 };
1012};
1013
1014&pinctrl_1 {
1015 pinctrl-names = "default";
1016 pinctrl-0 = <&sleep1>;
1017
492413dd
SS
1018 gpio_keys: gpio-keys {
1019 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1020 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1021 };
1022
73d2f794
SS
1023 max77686_irq: max77686-irq {
1024 samsung,pins = "gpx0-7";
1025 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1026 };
1027
43efe4fa
SS
1028 max77693_irq: max77693-irq {
1029 samsung,pins = "gpx1-5";
1030 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1031 };
1032
e2bae133
SS
1033 max77693_fuel_irq: max77693-fuel-irq {
1034 samsung,pins = "gpx2-3";
1035 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1036 };
1037
965228d3
SS
1038 sdhci2_cd: sdhci2-cd-irq {
1039 samsung,pins = "gpx3-4";
1040 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1041 };
1042
c769eaf7
SS
1043 hdmi_hpd: hdmi-hpd {
1044 samsung,pins = "gpx3-7";
1045 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1046 };
1047
1048 sleep1: sleep-states {
1049 PIN_SLP(gpk0-0, PREV, NONE);
1050 PIN_SLP(gpk0-1, PREV, NONE);
1051 PIN_SLP(gpk0-2, OUT0, NONE);
1052 PIN_SLP(gpk0-3, PREV, NONE);
1053 PIN_SLP(gpk0-4, PREV, NONE);
1054 PIN_SLP(gpk0-5, PREV, NONE);
1055 PIN_SLP(gpk0-6, PREV, NONE);
1056
1057 PIN_SLP(gpk1-0, INPUT, DOWN);
1058 PIN_SLP(gpk1-1, INPUT, DOWN);
1059 PIN_SLP(gpk1-2, INPUT, DOWN);
1060 PIN_SLP(gpk1-3, PREV, NONE);
1061 PIN_SLP(gpk1-4, PREV, NONE);
1062 PIN_SLP(gpk1-5, PREV, NONE);
1063 PIN_SLP(gpk1-6, PREV, NONE);
1064
1065 PIN_SLP(gpk2-0, INPUT, DOWN);
1066 PIN_SLP(gpk2-1, INPUT, DOWN);
1067 PIN_SLP(gpk2-2, INPUT, DOWN);
1068 PIN_SLP(gpk2-3, INPUT, DOWN);
1069 PIN_SLP(gpk2-4, INPUT, DOWN);
1070 PIN_SLP(gpk2-5, INPUT, DOWN);
1071 PIN_SLP(gpk2-6, INPUT, DOWN);
1072
1073 PIN_SLP(gpk3-0, OUT0, NONE);
1074 PIN_SLP(gpk3-1, INPUT, NONE);
1075 PIN_SLP(gpk3-2, INPUT, DOWN);
1076 PIN_SLP(gpk3-3, INPUT, NONE);
1077 PIN_SLP(gpk3-4, INPUT, NONE);
1078 PIN_SLP(gpk3-5, INPUT, NONE);
1079 PIN_SLP(gpk3-6, INPUT, NONE);
1080
1081 PIN_SLP(gpl0-0, INPUT, DOWN);
1082 PIN_SLP(gpl0-1, INPUT, DOWN);
1083 PIN_SLP(gpl0-2, INPUT, DOWN);
1084 PIN_SLP(gpl0-3, INPUT, DOWN);
1085 PIN_SLP(gpl0-4, PREV, NONE);
1086 PIN_SLP(gpl0-6, PREV, NONE);
1087
1088 PIN_SLP(gpl1-0, INPUT, DOWN);
1089 PIN_SLP(gpl1-1, INPUT, DOWN);
1090 PIN_SLP(gpl2-0, INPUT, DOWN);
1091 PIN_SLP(gpl2-1, INPUT, DOWN);
1092 PIN_SLP(gpl2-2, INPUT, DOWN);
1093 PIN_SLP(gpl2-3, INPUT, DOWN);
1094 PIN_SLP(gpl2-4, INPUT, DOWN);
1095 PIN_SLP(gpl2-5, INPUT, DOWN);
1096 PIN_SLP(gpl2-6, PREV, NONE);
1097 PIN_SLP(gpl2-7, INPUT, DOWN);
1098
1099 PIN_SLP(gpm0-0, INPUT, DOWN);
1100 PIN_SLP(gpm0-1, INPUT, DOWN);
1101 PIN_SLP(gpm0-2, INPUT, DOWN);
1102 PIN_SLP(gpm0-3, INPUT, DOWN);
1103 PIN_SLP(gpm0-4, INPUT, DOWN);
1104 PIN_SLP(gpm0-5, INPUT, DOWN);
1105 PIN_SLP(gpm0-6, INPUT, DOWN);
1106 PIN_SLP(gpm0-7, INPUT, DOWN);
1107
1108 PIN_SLP(gpm1-0, INPUT, DOWN);
1109 PIN_SLP(gpm1-1, INPUT, DOWN);
1110 PIN_SLP(gpm1-2, INPUT, NONE);
1111 PIN_SLP(gpm1-3, INPUT, NONE);
1112 PIN_SLP(gpm1-4, INPUT, NONE);
1113 PIN_SLP(gpm1-5, INPUT, NONE);
1114 PIN_SLP(gpm1-6, INPUT, DOWN);
1115
1116 PIN_SLP(gpm2-0, INPUT, NONE);
1117 PIN_SLP(gpm2-1, INPUT, NONE);
1118 PIN_SLP(gpm2-2, INPUT, DOWN);
1119 PIN_SLP(gpm2-3, INPUT, DOWN);
1120 PIN_SLP(gpm2-4, INPUT, DOWN);
1121
1122 PIN_SLP(gpm3-0, PREV, NONE);
1123 PIN_SLP(gpm3-1, PREV, NONE);
1124 PIN_SLP(gpm3-2, PREV, NONE);
1125 PIN_SLP(gpm3-3, OUT1, NONE);
1126 PIN_SLP(gpm3-4, INPUT, DOWN);
1127 PIN_SLP(gpm3-5, INPUT, DOWN);
1128 PIN_SLP(gpm3-6, INPUT, DOWN);
1129 PIN_SLP(gpm3-7, INPUT, DOWN);
1130
1131 PIN_SLP(gpm4-0, INPUT, DOWN);
1132 PIN_SLP(gpm4-1, INPUT, DOWN);
1133 PIN_SLP(gpm4-2, INPUT, DOWN);
1134 PIN_SLP(gpm4-3, INPUT, DOWN);
1135 PIN_SLP(gpm4-4, INPUT, DOWN);
1136 PIN_SLP(gpm4-5, INPUT, DOWN);
1137 PIN_SLP(gpm4-6, INPUT, DOWN);
1138 PIN_SLP(gpm4-7, INPUT, DOWN);
1139
1140 PIN_SLP(gpy0-0, INPUT, DOWN);
1141 PIN_SLP(gpy0-1, INPUT, DOWN);
1142 PIN_SLP(gpy0-2, INPUT, DOWN);
1143 PIN_SLP(gpy0-3, INPUT, DOWN);
1144 PIN_SLP(gpy0-4, INPUT, DOWN);
1145 PIN_SLP(gpy0-5, INPUT, DOWN);
1146
1147 PIN_SLP(gpy1-0, INPUT, DOWN);
1148 PIN_SLP(gpy1-1, INPUT, DOWN);
1149 PIN_SLP(gpy1-2, INPUT, DOWN);
1150 PIN_SLP(gpy1-3, INPUT, DOWN);
1151
1152 PIN_SLP(gpy2-0, PREV, NONE);
1153 PIN_SLP(gpy2-1, INPUT, DOWN);
1154 PIN_SLP(gpy2-2, INPUT, NONE);
1155 PIN_SLP(gpy2-3, INPUT, NONE);
1156 PIN_SLP(gpy2-4, INPUT, NONE);
1157 PIN_SLP(gpy2-5, INPUT, NONE);
1158
1159 PIN_SLP(gpy3-0, INPUT, DOWN);
1160 PIN_SLP(gpy3-1, INPUT, DOWN);
1161 PIN_SLP(gpy3-2, INPUT, DOWN);
1162 PIN_SLP(gpy3-3, INPUT, DOWN);
1163 PIN_SLP(gpy3-4, INPUT, DOWN);
1164 PIN_SLP(gpy3-5, INPUT, DOWN);
1165 PIN_SLP(gpy3-6, INPUT, DOWN);
1166 PIN_SLP(gpy3-7, INPUT, DOWN);
1167
1168 PIN_SLP(gpy4-0, INPUT, DOWN);
1169 PIN_SLP(gpy4-1, INPUT, DOWN);
1170 PIN_SLP(gpy4-2, INPUT, DOWN);
1171 PIN_SLP(gpy4-3, INPUT, DOWN);
1172 PIN_SLP(gpy4-4, INPUT, DOWN);
1173 PIN_SLP(gpy4-5, INPUT, DOWN);
1174 PIN_SLP(gpy4-6, INPUT, DOWN);
1175 PIN_SLP(gpy4-7, INPUT, DOWN);
1176
1177 PIN_SLP(gpy5-0, INPUT, DOWN);
1178 PIN_SLP(gpy5-1, INPUT, DOWN);
1179 PIN_SLP(gpy5-2, INPUT, DOWN);
1180 PIN_SLP(gpy5-3, INPUT, DOWN);
1181 PIN_SLP(gpy5-4, INPUT, DOWN);
1182 PIN_SLP(gpy5-5, INPUT, DOWN);
1183 PIN_SLP(gpy5-6, INPUT, DOWN);
1184 PIN_SLP(gpy5-7, INPUT, DOWN);
1185
1186 PIN_SLP(gpy6-0, INPUT, DOWN);
1187 PIN_SLP(gpy6-1, INPUT, DOWN);
1188 PIN_SLP(gpy6-2, INPUT, DOWN);
1189 PIN_SLP(gpy6-3, INPUT, DOWN);
1190 PIN_SLP(gpy6-4, INPUT, DOWN);
1191 PIN_SLP(gpy6-5, INPUT, DOWN);
1192 PIN_SLP(gpy6-6, INPUT, DOWN);
1193 PIN_SLP(gpy6-7, INPUT, DOWN);
1194 };
1195};
1196
1197&pinctrl_2 {
1198 pinctrl-names = "default";
1199 pinctrl-0 = <&sleep2>;
1200
1201 sleep2: sleep-states {
1202 PIN_SLP(gpz-0, INPUT, DOWN);
1203 PIN_SLP(gpz-1, INPUT, DOWN);
1204 PIN_SLP(gpz-2, INPUT, DOWN);
1205 PIN_SLP(gpz-3, INPUT, DOWN);
1206 PIN_SLP(gpz-4, INPUT, DOWN);
1207 PIN_SLP(gpz-5, INPUT, DOWN);
1208 PIN_SLP(gpz-6, INPUT, DOWN);
1209 };
1210};
1211
1212&pinctrl_3 {
1213 pinctrl-names = "default";
1214 pinctrl-0 = <&sleep3>;
1215
1216 sleep3: sleep-states {
1217 PIN_SLP(gpv0-0, INPUT, DOWN);
1218 PIN_SLP(gpv0-1, INPUT, DOWN);
1219 PIN_SLP(gpv0-2, INPUT, DOWN);
1220 PIN_SLP(gpv0-3, INPUT, DOWN);
1221 PIN_SLP(gpv0-4, INPUT, DOWN);
1222 PIN_SLP(gpv0-5, INPUT, DOWN);
1223 PIN_SLP(gpv0-6, INPUT, DOWN);
1224 PIN_SLP(gpv0-7, INPUT, DOWN);
1225
1226 PIN_SLP(gpv1-0, INPUT, DOWN);
1227 PIN_SLP(gpv1-1, INPUT, DOWN);
1228 PIN_SLP(gpv1-2, INPUT, DOWN);
1229 PIN_SLP(gpv1-3, INPUT, DOWN);
1230 PIN_SLP(gpv1-4, INPUT, DOWN);
1231 PIN_SLP(gpv1-5, INPUT, DOWN);
1232 PIN_SLP(gpv1-6, INPUT, DOWN);
1233 PIN_SLP(gpv1-7, INPUT, DOWN);
1234
1235 PIN_SLP(gpv2-0, INPUT, DOWN);
1236 PIN_SLP(gpv2-1, INPUT, DOWN);
1237 PIN_SLP(gpv2-2, INPUT, DOWN);
1238 PIN_SLP(gpv2-3, INPUT, DOWN);
1239 PIN_SLP(gpv2-4, INPUT, DOWN);
1240 PIN_SLP(gpv2-5, INPUT, DOWN);
1241 PIN_SLP(gpv2-6, INPUT, DOWN);
1242 PIN_SLP(gpv2-7, INPUT, DOWN);
1243
1244 PIN_SLP(gpv3-0, INPUT, DOWN);
1245 PIN_SLP(gpv3-1, INPUT, DOWN);
1246 PIN_SLP(gpv3-2, INPUT, DOWN);
1247 PIN_SLP(gpv3-3, INPUT, DOWN);
1248 PIN_SLP(gpv3-4, INPUT, DOWN);
1249 PIN_SLP(gpv3-5, INPUT, DOWN);
1250 PIN_SLP(gpv3-6, INPUT, DOWN);
1251 PIN_SLP(gpv3-7, INPUT, DOWN);
1252
1253 PIN_SLP(gpv4-0, INPUT, DOWN);
1254 };
1255};
1256
1257&pwm {
1258 pinctrl-0 = <&pwm0_out>;
1259 pinctrl-names = "default";
1260 samsung,pwm-outputs = <0>;
1261 status = "okay";
1262};
1263
1264&rtc {
1265 status = "okay";
1266 clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1267 clock-names = "rtc", "rtc_src";
1268};
1269
1270&sdhci_2 {
1271 bus-width = <4>;
b8032118 1272 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
965228d3 1273 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
c769eaf7
SS
1274 pinctrl-names = "default";
1275 vmmc-supply = <&ldo21_reg>;
1276 status = "okay";
1277};
1278
1279&sdhci_3 {
1280 #address-cells = <1>;
1281 #size-cells = <0>;
1282 non-removable;
1283 bus-width = <4>;
1284
1285 mmc-pwrseq = <&wlan_pwrseq>;
1286 pinctrl-names = "default";
1287 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1288 status = "okay";
1289
1290 brcmf: wifi@1 {
1291 reg = <1>;
1292 compatible = "brcm,bcm4329-fmac";
1293 interrupt-parent = <&gpx2>;
1294 interrupts = <5 IRQ_TYPE_NONE>;
1295 interrupt-names = "host-wake";
1296 };
1297};
1298
1299&serial_0 {
1300 status = "okay";
1301};
1302
1303&serial_1 {
1304 status = "okay";
1305};
1306
1307&serial_2 {
1308 status = "okay";
1309};
1310
1311&serial_3 {
1312 status = "okay";
1313};
1314
1315&spi_1 {
1316 pinctrl-names = "default";
1317 pinctrl-0 = <&spi1_bus>;
1318 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1319 status = "okay";
1320
1321 s5c73m3_spi: s5c73m3@0 {
1322 compatible = "samsung,s5c73m3";
1323 spi-max-frequency = <50000000>;
1324 reg = <0>;
1325 controller-data {
1326 samsung,spi-feedback-delay = <2>;
1327 };
1328 };
1329};
1330
1331&tmu {
1332 vtmu-supply = <&ldo10_reg>;
1333 status = "okay";
1334};