]>
Commit | Line | Data |
---|---|---|
15dfdfad TF |
1 | /* |
2 | * Samsung's Exynos4412 based Trats 2 board device tree source | |
3 | * | |
4 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. | |
5 | * http://www.samsung.com | |
6 | * | |
7 | * Device tree source file for Samsung's Trats 2 board which is based on | |
8 | * Samsung's Exynos4412 SoC. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or modify | |
11 | * it under the terms of the GNU General Public License version 2 as | |
12 | * published by the Free Software Foundation. | |
13 | */ | |
14 | ||
15 | /dts-v1/; | |
16 | #include "exynos4412.dtsi" | |
7eec1266 | 17 | #include <dt-bindings/gpio/gpio.h> |
e8614292 | 18 | #include <dt-bindings/interrupt-controller/irq.h> |
15dfdfad TF |
19 | |
20 | / { | |
21 | model = "Samsung Trats 2 based on Exynos4412"; | |
8bdb31b4 | 22 | compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; |
15dfdfad | 23 | |
9f1eaef2 | 24 | aliases { |
6af2ba90 | 25 | i2c9 = &i2c_ak8975; |
85cb4e0b | 26 | i2c10 = &i2c_cm36651; |
7eec1266 | 27 | i2c11 = &i2c_max77693; |
e8614292 | 28 | i2c12 = &i2c_max77693_fuel; |
9f1eaef2 JA |
29 | }; |
30 | ||
15dfdfad TF |
31 | memory { |
32 | reg = <0x40000000 0x40000000>; | |
33 | }; | |
34 | ||
35 | chosen { | |
36 | bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; | |
62d38099 | 37 | stdout-path = &serial_2; |
15dfdfad TF |
38 | }; |
39 | ||
40 | firmware@0204F000 { | |
41 | compatible = "samsung,secure-firmware"; | |
42 | reg = <0x0204F000 0x1000>; | |
43 | }; | |
44 | ||
45 | fixed-rate-clocks { | |
46 | xxti { | |
47 | compatible = "samsung,clock-xxti", "fixed-clock"; | |
48 | clock-frequency = <0>; | |
49 | }; | |
50 | ||
51 | xusbxti { | |
52 | compatible = "samsung,clock-xusbxti", "fixed-clock"; | |
53 | clock-frequency = <24000000>; | |
54 | }; | |
55 | }; | |
56 | ||
57 | regulators { | |
58 | compatible = "simple-bus"; | |
59 | #address-cells = <1>; | |
60 | #size-cells = <0>; | |
61 | ||
b4fec647 SN |
62 | cam_io_reg: voltage-regulator-1 { |
63 | compatible = "regulator-fixed"; | |
64 | regulator-name = "CAM_SENSOR_A"; | |
65 | regulator-min-microvolt = <2800000>; | |
66 | regulator-max-microvolt = <2800000>; | |
67 | gpio = <&gpm0 2 0>; | |
68 | enable-active-high; | |
69 | }; | |
70 | ||
420ae845 AH |
71 | lcd_vdd3_reg: voltage-regulator-2 { |
72 | compatible = "regulator-fixed"; | |
73 | regulator-name = "LCD_VDD_2.2V"; | |
74 | regulator-min-microvolt = <2200000>; | |
75 | regulator-max-microvolt = <2200000>; | |
76 | gpio = <&gpc0 1 0>; | |
77 | enable-active-high; | |
78 | }; | |
79 | ||
4cb37864 SN |
80 | cam_af_reg: voltage-regulator-3 { |
81 | compatible = "regulator-fixed"; | |
82 | regulator-name = "CAM_AF"; | |
83 | regulator-min-microvolt = <2800000>; | |
84 | regulator-max-microvolt = <2800000>; | |
85 | gpio = <&gpm0 4 0>; | |
86 | enable-active-high; | |
87 | }; | |
88 | ||
85cb4e0b BS |
89 | ps_als_reg: voltage-regulator-5 { |
90 | compatible = "regulator-fixed"; | |
91 | regulator-name = "LED_A_3.0V"; | |
92 | regulator-min-microvolt = <3000000>; | |
93 | regulator-max-microvolt = <3000000>; | |
94 | gpio = <&gpj0 5 0>; | |
95 | enable-active-high; | |
96 | }; | |
15dfdfad TF |
97 | }; |
98 | ||
99 | gpio-keys { | |
100 | compatible = "gpio-keys"; | |
101 | ||
102 | key-down { | |
172ff6c6 | 103 | gpios = <&gpx3 3 1>; |
15dfdfad TF |
104 | linux,code = <114>; |
105 | label = "volume down"; | |
106 | debounce-interval = <10>; | |
107 | }; | |
108 | ||
109 | key-up { | |
172ff6c6 | 110 | gpios = <&gpx2 2 1>; |
15dfdfad TF |
111 | linux,code = <115>; |
112 | label = "volume up"; | |
113 | debounce-interval = <10>; | |
114 | }; | |
115 | ||
116 | key-power { | |
15dfdfad TF |
117 | gpios = <&gpx2 7 1>; |
118 | linux,code = <116>; | |
119 | label = "power"; | |
120 | debounce-interval = <10>; | |
121 | gpio-key,wakeup; | |
122 | }; | |
172ff6c6 BS |
123 | |
124 | key-ok { | |
125 | gpios = <&gpx0 1 1>; | |
126 | linux,code = <139>; | |
127 | label = "ok"; | |
128 | debounce-inteval = <10>; | |
129 | gpio-key,wakeup; | |
130 | }; | |
15dfdfad TF |
131 | }; |
132 | ||
4f423788 CC |
133 | adc: adc@126C0000 { |
134 | vdd-supply = <&ldo3_reg>; | |
135 | status = "okay"; | |
136 | }; | |
137 | ||
15dfdfad TF |
138 | i2c@13890000 { |
139 | samsung,i2c-sda-delay = <100>; | |
140 | samsung,i2c-slave-addr = <0x10>; | |
141 | samsung,i2c-max-bus-freq = <400000>; | |
142 | pinctrl-0 = <&i2c3_bus>; | |
143 | pinctrl-names = "default"; | |
144 | status = "okay"; | |
145 | ||
146 | mms114-touchscreen@48 { | |
147 | compatible = "melfas,mms114"; | |
148 | reg = <0x48>; | |
149 | interrupt-parent = <&gpm2>; | |
150 | interrupts = <3 2>; | |
151 | x-size = <720>; | |
152 | y-size = <1280>; | |
153 | avdd-supply = <&ldo23_reg>; | |
154 | vdd-supply = <&ldo24_reg>; | |
155 | }; | |
156 | }; | |
157 | ||
4cb37864 SN |
158 | i2c_0: i2c@13860000 { |
159 | samsung,i2c-sda-delay = <100>; | |
160 | samsung,i2c-slave-addr = <0x10>; | |
161 | samsung,i2c-max-bus-freq = <400000>; | |
162 | pinctrl-0 = <&i2c0_bus>; | |
163 | pinctrl-names = "default"; | |
164 | status = "okay"; | |
165 | ||
166 | s5c73m3@3c { | |
167 | compatible = "samsung,s5c73m3"; | |
168 | reg = <0x3c>; | |
169 | standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ | |
170 | xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ | |
171 | vdd-int-supply = <&buck9_reg>; | |
172 | vddio-cis-supply = <&ldo9_reg>; | |
173 | vdda-supply = <&ldo17_reg>; | |
174 | vddio-host-supply = <&ldo18_reg>; | |
175 | vdd-af-supply = <&cam_af_reg>; | |
176 | vdd-reg-supply = <&cam_io_reg>; | |
177 | clock-frequency = <24000000>; | |
178 | /* CAM_A_CLKOUT */ | |
179 | clocks = <&camera 0>; | |
180 | clock-names = "cis_extclk"; | |
181 | port { | |
182 | s5c73m3_ep: endpoint { | |
183 | remote-endpoint = <&csis0_ep>; | |
184 | data-lanes = <1 2 3 4>; | |
185 | }; | |
186 | }; | |
187 | }; | |
188 | }; | |
189 | ||
440e5aef IS |
190 | i2c@138A0000 { |
191 | samsung,i2c-sda-delay = <100>; | |
192 | samsung,i2c-slave-addr = <0x10>; | |
193 | samsung,i2c-max-bus-freq = <100000>; | |
194 | pinctrl-0 = <&i2c4_bus>; | |
195 | pinctrl-names = "default"; | |
196 | status = "okay"; | |
197 | ||
198 | wm1811: wm1811@1a { | |
199 | compatible = "wlf,wm1811"; | |
200 | reg = <0x1a>; | |
201 | clocks = <&pmu_system_controller 0>; | |
202 | clock-names = "MCLK1"; | |
203 | DCVDD-supply = <&ldo3_reg>; | |
204 | DBVDD1-supply = <&ldo3_reg>; | |
205 | wlf,ldo1ena = <&gpj0 4 0>; | |
206 | }; | |
207 | }; | |
208 | ||
15dfdfad TF |
209 | i2c@138D0000 { |
210 | samsung,i2c-sda-delay = <100>; | |
211 | samsung,i2c-slave-addr = <0x10>; | |
212 | samsung,i2c-max-bus-freq = <100000>; | |
213 | pinctrl-0 = <&i2c7_bus>; | |
214 | pinctrl-names = "default"; | |
215 | status = "okay"; | |
216 | ||
217 | max77686_pmic@09 { | |
218 | compatible = "maxim,max77686"; | |
219 | interrupt-parent = <&gpx0>; | |
220 | interrupts = <7 0>; | |
221 | reg = <0x09>; | |
ada12c47 | 222 | #clock-cells = <1>; |
15dfdfad TF |
223 | |
224 | voltage-regulators { | |
225 | ldo1_reg: ldo1 { | |
226 | regulator-compatible = "LDO1"; | |
227 | regulator-name = "VALIVE_1.0V_AP"; | |
228 | regulator-min-microvolt = <1000000>; | |
229 | regulator-max-microvolt = <1000000>; | |
230 | regulator-always-on; | |
15dfdfad TF |
231 | }; |
232 | ||
233 | ldo2_reg: ldo2 { | |
234 | regulator-compatible = "LDO2"; | |
235 | regulator-name = "VM1M2_1.2V_AP"; | |
236 | regulator-min-microvolt = <1200000>; | |
237 | regulator-max-microvolt = <1200000>; | |
238 | regulator-always-on; | |
4a235f6a KK |
239 | regulator-state-mem { |
240 | regulator-on-in-suspend; | |
241 | }; | |
15dfdfad TF |
242 | }; |
243 | ||
244 | ldo3_reg: ldo3 { | |
245 | regulator-compatible = "LDO3"; | |
246 | regulator-name = "VCC_1.8V_AP"; | |
247 | regulator-min-microvolt = <1800000>; | |
248 | regulator-max-microvolt = <1800000>; | |
249 | regulator-always-on; | |
15dfdfad TF |
250 | }; |
251 | ||
252 | ldo4_reg: ldo4 { | |
253 | regulator-compatible = "LDO4"; | |
254 | regulator-name = "VCC_2.8V_AP"; | |
255 | regulator-min-microvolt = <2800000>; | |
256 | regulator-max-microvolt = <2800000>; | |
257 | regulator-always-on; | |
15dfdfad TF |
258 | }; |
259 | ||
260 | ldo5_reg: ldo5 { | |
261 | regulator-compatible = "LDO5"; | |
262 | regulator-name = "VCC_1.8V_IO"; | |
263 | regulator-min-microvolt = <1800000>; | |
264 | regulator-max-microvolt = <1800000>; | |
265 | regulator-always-on; | |
15dfdfad TF |
266 | }; |
267 | ||
268 | ldo6_reg: ldo6 { | |
269 | regulator-compatible = "LDO6"; | |
270 | regulator-name = "VMPLL_1.0V_AP"; | |
271 | regulator-min-microvolt = <1000000>; | |
272 | regulator-max-microvolt = <1000000>; | |
273 | regulator-always-on; | |
4a235f6a KK |
274 | regulator-state-mem { |
275 | regulator-on-in-suspend; | |
276 | }; | |
15dfdfad TF |
277 | }; |
278 | ||
279 | ldo7_reg: ldo7 { | |
280 | regulator-compatible = "LDO7"; | |
281 | regulator-name = "VPLL_1.0V_AP"; | |
282 | regulator-min-microvolt = <1000000>; | |
283 | regulator-max-microvolt = <1000000>; | |
284 | regulator-always-on; | |
4a235f6a KK |
285 | regulator-state-mem { |
286 | regulator-on-in-suspend; | |
287 | }; | |
15dfdfad TF |
288 | }; |
289 | ||
290 | ldo8_reg: ldo8 { | |
291 | regulator-compatible = "LDO8"; | |
292 | regulator-name = "VMIPI_1.0V"; | |
293 | regulator-min-microvolt = <1000000>; | |
294 | regulator-max-microvolt = <1000000>; | |
4a235f6a KK |
295 | regulator-state-mem { |
296 | regulator-off-in-suspend; | |
297 | }; | |
15dfdfad TF |
298 | }; |
299 | ||
300 | ldo9_reg: ldo9 { | |
301 | regulator-compatible = "LDO9"; | |
302 | regulator-name = "CAM_ISP_MIPI_1.2V"; | |
303 | regulator-min-microvolt = <1200000>; | |
304 | regulator-max-microvolt = <1200000>; | |
15dfdfad TF |
305 | }; |
306 | ||
307 | ldo10_reg: ldo10 { | |
308 | regulator-compatible = "LDO10"; | |
309 | regulator-name = "VMIPI_1.8V"; | |
310 | regulator-min-microvolt = <1800000>; | |
311 | regulator-max-microvolt = <1800000>; | |
4a235f6a KK |
312 | regulator-state-mem { |
313 | regulator-off-in-suspend; | |
314 | }; | |
15dfdfad TF |
315 | }; |
316 | ||
317 | ldo11_reg: ldo11 { | |
318 | regulator-compatible = "LDO11"; | |
319 | regulator-name = "VABB1_1.95V"; | |
320 | regulator-min-microvolt = <1950000>; | |
321 | regulator-max-microvolt = <1950000>; | |
322 | regulator-always-on; | |
4a235f6a KK |
323 | regulator-state-mem { |
324 | regulator-off-in-suspend; | |
325 | }; | |
15dfdfad TF |
326 | }; |
327 | ||
328 | ldo12_reg: ldo12 { | |
329 | regulator-compatible = "LDO12"; | |
330 | regulator-name = "VUOTG_3.0V"; | |
331 | regulator-min-microvolt = <3000000>; | |
332 | regulator-max-microvolt = <3000000>; | |
4a235f6a KK |
333 | regulator-state-mem { |
334 | regulator-off-in-suspend; | |
335 | }; | |
15dfdfad TF |
336 | }; |
337 | ||
338 | ldo13_reg: ldo13 { | |
339 | regulator-compatible = "LDO13"; | |
340 | regulator-name = "NFC_AVDD_1.8V"; | |
341 | regulator-min-microvolt = <1800000>; | |
342 | regulator-max-microvolt = <1800000>; | |
15dfdfad TF |
343 | }; |
344 | ||
345 | ldo14_reg: ldo14 { | |
346 | regulator-compatible = "LDO14"; | |
347 | regulator-name = "VABB2_1.95V"; | |
348 | regulator-min-microvolt = <1950000>; | |
349 | regulator-max-microvolt = <1950000>; | |
350 | regulator-always-on; | |
4a235f6a KK |
351 | regulator-state-mem { |
352 | regulator-off-in-suspend; | |
353 | }; | |
15dfdfad TF |
354 | }; |
355 | ||
356 | ldo15_reg: ldo15 { | |
357 | regulator-compatible = "LDO15"; | |
358 | regulator-name = "VHSIC_1.0V"; | |
359 | regulator-min-microvolt = <1000000>; | |
360 | regulator-max-microvolt = <1000000>; | |
4a235f6a KK |
361 | regulator-state-mem { |
362 | regulator-on-in-suspend; | |
363 | }; | |
15dfdfad TF |
364 | }; |
365 | ||
366 | ldo16_reg: ldo16 { | |
367 | regulator-compatible = "LDO16"; | |
368 | regulator-name = "VHSIC_1.8V"; | |
369 | regulator-min-microvolt = <1800000>; | |
370 | regulator-max-microvolt = <1800000>; | |
4a235f6a KK |
371 | regulator-state-mem { |
372 | regulator-on-in-suspend; | |
373 | }; | |
15dfdfad TF |
374 | }; |
375 | ||
376 | ldo17_reg: ldo17 { | |
377 | regulator-compatible = "LDO17"; | |
378 | regulator-name = "CAM_SENSOR_CORE_1.2V"; | |
379 | regulator-min-microvolt = <1200000>; | |
380 | regulator-max-microvolt = <1200000>; | |
15dfdfad TF |
381 | }; |
382 | ||
383 | ldo18_reg: ldo18 { | |
384 | regulator-compatible = "LDO18"; | |
385 | regulator-name = "CAM_ISP_SEN_IO_1.8V"; | |
386 | regulator-min-microvolt = <1800000>; | |
387 | regulator-max-microvolt = <1800000>; | |
15dfdfad TF |
388 | }; |
389 | ||
390 | ldo19_reg: ldo19 { | |
391 | regulator-compatible = "LDO19"; | |
392 | regulator-name = "VT_CAM_1.8V"; | |
393 | regulator-min-microvolt = <1800000>; | |
394 | regulator-max-microvolt = <1800000>; | |
15dfdfad TF |
395 | }; |
396 | ||
397 | ldo20_reg: ldo20 { | |
398 | regulator-compatible = "LDO20"; | |
399 | regulator-name = "VDDQ_PRE_1.8V"; | |
400 | regulator-min-microvolt = <1800000>; | |
401 | regulator-max-microvolt = <1800000>; | |
15dfdfad TF |
402 | }; |
403 | ||
404 | ldo21_reg: ldo21 { | |
405 | regulator-compatible = "LDO21"; | |
406 | regulator-name = "VTF_2.8V"; | |
407 | regulator-min-microvolt = <2800000>; | |
408 | regulator-max-microvolt = <2800000>; | |
faf9a3ea | 409 | maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; |
15dfdfad TF |
410 | }; |
411 | ||
412 | ldo22_reg: ldo22 { | |
413 | regulator-compatible = "LDO22"; | |
414 | regulator-name = "VMEM_VDD_2.8V"; | |
415 | regulator-min-microvolt = <2800000>; | |
416 | regulator-max-microvolt = <2800000>; | |
faf9a3ea | 417 | maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
15dfdfad TF |
418 | }; |
419 | ||
420 | ldo23_reg: ldo23 { | |
421 | regulator-compatible = "LDO23"; | |
422 | regulator-name = "TSP_AVDD_3.3V"; | |
423 | regulator-min-microvolt = <3300000>; | |
424 | regulator-max-microvolt = <3300000>; | |
15dfdfad TF |
425 | }; |
426 | ||
427 | ldo24_reg: ldo24 { | |
428 | regulator-compatible = "LDO24"; | |
429 | regulator-name = "TSP_VDD_1.8V"; | |
430 | regulator-min-microvolt = <1800000>; | |
431 | regulator-max-microvolt = <1800000>; | |
15dfdfad TF |
432 | }; |
433 | ||
434 | ldo25_reg: ldo25 { | |
435 | regulator-compatible = "LDO25"; | |
436 | regulator-name = "LCD_VCC_3.3V"; | |
437 | regulator-min-microvolt = <2800000>; | |
438 | regulator-max-microvolt = <2800000>; | |
15dfdfad TF |
439 | }; |
440 | ||
441 | ldo26_reg: ldo26 { | |
442 | regulator-compatible = "LDO26"; | |
443 | regulator-name = "MOTOR_VCC_3.0V"; | |
444 | regulator-min-microvolt = <3000000>; | |
445 | regulator-max-microvolt = <3000000>; | |
15dfdfad TF |
446 | }; |
447 | ||
448 | buck1_reg: buck1 { | |
449 | regulator-compatible = "BUCK1"; | |
450 | regulator-name = "vdd_mif"; | |
451 | regulator-min-microvolt = <850000>; | |
452 | regulator-max-microvolt = <1100000>; | |
453 | regulator-always-on; | |
454 | regulator-boot-on; | |
4a235f6a KK |
455 | regulator-state-mem { |
456 | regulator-off-in-suspend; | |
457 | }; | |
15dfdfad TF |
458 | }; |
459 | ||
460 | buck2_reg: buck2 { | |
461 | regulator-compatible = "BUCK2"; | |
462 | regulator-name = "vdd_arm"; | |
463 | regulator-min-microvolt = <850000>; | |
464 | regulator-max-microvolt = <1500000>; | |
465 | regulator-always-on; | |
466 | regulator-boot-on; | |
4a235f6a KK |
467 | regulator-state-mem { |
468 | regulator-on-in-suspend; | |
469 | }; | |
15dfdfad TF |
470 | }; |
471 | ||
472 | buck3_reg: buck3 { | |
473 | regulator-compatible = "BUCK3"; | |
474 | regulator-name = "vdd_int"; | |
475 | regulator-min-microvolt = <850000>; | |
476 | regulator-max-microvolt = <1150000>; | |
477 | regulator-always-on; | |
478 | regulator-boot-on; | |
4a235f6a KK |
479 | regulator-state-mem { |
480 | regulator-off-in-suspend; | |
481 | }; | |
15dfdfad TF |
482 | }; |
483 | ||
484 | buck4_reg: buck4 { | |
485 | regulator-compatible = "BUCK4"; | |
486 | regulator-name = "vdd_g3d"; | |
487 | regulator-min-microvolt = <850000>; | |
488 | regulator-max-microvolt = <1150000>; | |
489 | regulator-boot-on; | |
4a235f6a KK |
490 | regulator-state-mem { |
491 | regulator-off-in-suspend; | |
492 | }; | |
15dfdfad TF |
493 | }; |
494 | ||
495 | buck5_reg: buck5 { | |
496 | regulator-compatible = "BUCK5"; | |
497 | regulator-name = "VMEM_1.2V_AP"; | |
498 | regulator-min-microvolt = <1200000>; | |
499 | regulator-max-microvolt = <1200000>; | |
500 | regulator-always-on; | |
501 | }; | |
502 | ||
503 | buck6_reg: buck6 { | |
504 | regulator-compatible = "BUCK6"; | |
505 | regulator-name = "VCC_SUB_1.35V"; | |
506 | regulator-min-microvolt = <1350000>; | |
507 | regulator-max-microvolt = <1350000>; | |
508 | regulator-always-on; | |
509 | }; | |
510 | ||
511 | buck7_reg: buck7 { | |
512 | regulator-compatible = "BUCK7"; | |
513 | regulator-name = "VCC_SUB_2.0V"; | |
514 | regulator-min-microvolt = <2000000>; | |
515 | regulator-max-microvolt = <2000000>; | |
516 | regulator-always-on; | |
517 | }; | |
518 | ||
519 | buck8_reg: buck8 { | |
520 | regulator-compatible = "BUCK8"; | |
521 | regulator-name = "VMEM_VDDF_3.0V"; | |
522 | regulator-min-microvolt = <2850000>; | |
523 | regulator-max-microvolt = <2850000>; | |
faf9a3ea | 524 | maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
15dfdfad TF |
525 | }; |
526 | ||
527 | buck9_reg: buck9 { | |
528 | regulator-compatible = "BUCK9"; | |
529 | regulator-name = "CAM_ISP_CORE_1.2V"; | |
530 | regulator-min-microvolt = <1000000>; | |
531 | regulator-max-microvolt = <1200000>; | |
faf9a3ea | 532 | maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; |
15dfdfad TF |
533 | }; |
534 | }; | |
535 | }; | |
536 | }; | |
537 | ||
7eec1266 KK |
538 | i2c_max77693: i2c-gpio-1 { |
539 | compatible = "i2c-gpio"; | |
540 | gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; | |
541 | i2c-gpio,delay-us = <2>; | |
542 | #address-cells = <1>; | |
543 | #size-cells = <0>; | |
544 | status = "okay"; | |
545 | ||
546 | max77693@66 { | |
547 | compatible = "maxim,max77693"; | |
548 | interrupt-parent = <&gpx1>; | |
549 | interrupts = <5 2>; | |
550 | reg = <0x66>; | |
551 | ||
552 | regulators { | |
553 | esafeout1_reg: ESAFEOUT1@1 { | |
554 | regulator-name = "ESAFEOUT1"; | |
555 | }; | |
556 | esafeout2_reg: ESAFEOUT2@2 { | |
557 | regulator-name = "ESAFEOUT2"; | |
558 | }; | |
559 | charger_reg: CHARGER@0 { | |
560 | regulator-name = "CHARGER"; | |
561 | regulator-min-microamp = <60000>; | |
562 | regulator-max-microamp = <2580000>; | |
563 | }; | |
564 | }; | |
d9c68089 JK |
565 | |
566 | max77693_haptic { | |
567 | compatible = "maxim,max77693-haptic"; | |
568 | haptic-supply = <&ldo26_reg>; | |
569 | pwms = <&pwm 0 38022 0>; | |
570 | }; | |
043ef148 KK |
571 | |
572 | charger { | |
573 | compatible = "maxim,max77693-charger"; | |
574 | ||
575 | maxim,constant-microvolt = <4350000>; | |
576 | maxim,min-system-microvolt = <3600000>; | |
577 | maxim,thermal-regulation-celsius = <100>; | |
578 | maxim,battery-overcurrent-microamp = <3500000>; | |
579 | maxim,charge-input-threshold-microvolt = <4300000>; | |
580 | }; | |
7eec1266 KK |
581 | }; |
582 | }; | |
583 | ||
e8614292 KK |
584 | i2c_max77693_fuel: i2c-gpio-3 { |
585 | compatible = "i2c-gpio"; | |
586 | gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; | |
587 | i2c-gpio,delay-us = <2>; | |
588 | #address-cells = <1>; | |
589 | #size-cells = <0>; | |
590 | status = "okay"; | |
591 | ||
592 | max77693-fuel-gauge@36 { | |
593 | compatible = "maxim,max17047"; | |
594 | interrupt-parent = <&gpx2>; | |
595 | interrupts = <3 IRQ_TYPE_EDGE_FALLING>; | |
596 | reg = <0x36>; | |
7eec1266 KK |
597 | }; |
598 | }; | |
599 | ||
ca7c11fc TF |
600 | mmc@12550000 { |
601 | num-slots = <1>; | |
ca7c11fc | 602 | broken-cd; |
15dfdfad | 603 | non-removable; |
ca7c11fc | 604 | card-detect-delay = <200>; |
faf9a3ea | 605 | vmmc-supply = <&ldo22_reg>; |
ca7c11fc TF |
606 | clock-frequency = <400000000>; |
607 | samsung,dw-mshc-ciu-div = <0>; | |
608 | samsung,dw-mshc-sdr-timing = <2 3>; | |
609 | samsung,dw-mshc-ddr-timing = <1 2>; | |
610 | pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; | |
611 | pinctrl-names = "default"; | |
15dfdfad | 612 | status = "okay"; |
aaa25a5a JC |
613 | bus-width = <8>; |
614 | cap-mmc-highspeed; | |
15dfdfad TF |
615 | }; |
616 | ||
a427d150 KK |
617 | sdhci@12530000 { |
618 | bus-width = <4>; | |
619 | cd-gpios = <&gpx3 4 0>; | |
620 | cd-inverted; | |
621 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; | |
622 | pinctrl-names = "default"; | |
623 | vmmc-supply = <&ldo21_reg>; | |
624 | status = "okay"; | |
625 | }; | |
626 | ||
15dfdfad TF |
627 | serial@13800000 { |
628 | status = "okay"; | |
629 | }; | |
630 | ||
631 | serial@13810000 { | |
632 | status = "okay"; | |
633 | }; | |
634 | ||
635 | serial@13820000 { | |
636 | status = "okay"; | |
637 | }; | |
638 | ||
639 | serial@13830000 { | |
640 | status = "okay"; | |
641 | }; | |
9f1eaef2 | 642 | |
432047f9 LM |
643 | tmu@100C0000 { |
644 | vtmu-supply = <&ldo10_reg>; | |
645 | status = "okay"; | |
646 | }; | |
647 | ||
9f1eaef2 JA |
648 | i2c_ak8975: i2c-gpio-0 { |
649 | compatible = "i2c-gpio"; | |
650 | gpios = <&gpy2 4 0>, <&gpy2 5 0>; | |
651 | i2c-gpio,delay-us = <2>; | |
652 | #address-cells = <1>; | |
653 | #size-cells = <0>; | |
654 | status = "okay"; | |
655 | ||
656 | ak8975@0c { | |
30cc798b | 657 | compatible = "asahi-kasei,ak8975"; |
9f1eaef2 JA |
658 | reg = <0x0c>; |
659 | gpios = <&gpj0 7 0>; | |
660 | }; | |
661 | }; | |
b4fec647 | 662 | |
85cb4e0b BS |
663 | i2c_cm36651: i2c-gpio-2 { |
664 | compatible = "i2c-gpio"; | |
665 | gpios = <&gpf0 0 1>, <&gpf0 1 1>; | |
666 | i2c-gpio,delay-us = <2>; | |
667 | #address-cells = <1>; | |
668 | #size-cells = <0>; | |
669 | ||
670 | cm36651@18 { | |
671 | compatible = "capella,cm36651"; | |
672 | reg = <0x18>; | |
673 | interrupt-parent = <&gpx0>; | |
674 | interrupts = <2 2>; | |
675 | vled-supply = <&ps_als_reg>; | |
676 | }; | |
677 | }; | |
678 | ||
201f1267 AH |
679 | spi_1: spi@13930000 { |
680 | pinctrl-names = "default"; | |
681 | pinctrl-0 = <&spi1_bus>; | |
e138d433 | 682 | cs-gpios = <&gpb 5 0>; |
201f1267 AH |
683 | status = "okay"; |
684 | ||
685 | s5c73m3_spi: s5c73m3 { | |
686 | compatible = "samsung,s5c73m3"; | |
687 | spi-max-frequency = <50000000>; | |
688 | reg = <0>; | |
689 | controller-data { | |
201f1267 AH |
690 | samsung,spi-feedback-delay = <2>; |
691 | }; | |
692 | }; | |
693 | }; | |
694 | ||
249358cb JK |
695 | pwm: pwm@139D0000 { |
696 | pinctrl-0 = <&pwm0_out>; | |
697 | pinctrl-names = "default"; | |
698 | samsung,pwm-outputs = <0>; | |
699 | status = "okay"; | |
700 | }; | |
701 | ||
420ae845 AH |
702 | dsi_0: dsi@11C80000 { |
703 | vddcore-supply = <&ldo8_reg>; | |
704 | vddio-supply = <&ldo10_reg>; | |
705 | samsung,pll-clock-frequency = <24000000>; | |
706 | status = "okay"; | |
707 | ||
708 | ports { | |
709 | #address-cells = <1>; | |
710 | #size-cells = <0>; | |
711 | ||
712 | port@1 { | |
713 | reg = <1>; | |
714 | ||
715 | dsi_out: endpoint { | |
716 | remote-endpoint = <&dsi_in>; | |
717 | samsung,burst-clock-frequency = <500000000>; | |
718 | samsung,esc-clock-frequency = <20000000>; | |
719 | }; | |
720 | }; | |
721 | }; | |
722 | ||
723 | panel@0 { | |
724 | compatible = "samsung,s6e8aa0"; | |
725 | reg = <0>; | |
726 | vdd3-supply = <&lcd_vdd3_reg>; | |
727 | vci-supply = <&ldo25_reg>; | |
728 | reset-gpios = <&gpy4 5 0>; | |
729 | power-on-delay= <50>; | |
730 | reset-delay = <100>; | |
731 | init-delay = <100>; | |
732 | flip-horizontal; | |
733 | flip-vertical; | |
734 | panel-width-mm = <58>; | |
735 | panel-height-mm = <103>; | |
736 | ||
737 | display-timings { | |
738 | timing-0 { | |
242ddf04 | 739 | clock-frequency = <57153600>; |
420ae845 AH |
740 | hactive = <720>; |
741 | vactive = <1280>; | |
742 | hfront-porch = <5>; | |
743 | hback-porch = <5>; | |
744 | hsync-len = <5>; | |
745 | vfront-porch = <13>; | |
746 | vback-porch = <1>; | |
747 | vsync-len = <2>; | |
748 | }; | |
749 | }; | |
750 | ||
751 | port { | |
752 | dsi_in: endpoint { | |
753 | remote-endpoint = <&dsi_out>; | |
754 | }; | |
755 | }; | |
756 | }; | |
757 | }; | |
758 | ||
bbab1e3f AH |
759 | fimd@11c00000 { |
760 | status = "okay"; | |
761 | }; | |
762 | ||
4cb37864 SN |
763 | camera: camera { |
764 | pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; | |
b4fec647 SN |
765 | pinctrl-names = "default"; |
766 | status = "okay"; | |
0357a443 SN |
767 | assigned-clocks = <&clock CLK_MOUT_CAM0>, |
768 | <&clock CLK_MOUT_CAM1>; | |
cfe3b893 SN |
769 | assigned-clock-parents = <&clock CLK_XUSBXTI>, |
770 | <&clock CLK_XUSBXTI>; | |
b4fec647 SN |
771 | |
772 | fimc_0: fimc@11800000 { | |
773 | status = "okay"; | |
0357a443 SN |
774 | assigned-clocks = <&clock CLK_MOUT_FIMC0>, |
775 | <&clock CLK_SCLK_FIMC0>; | |
776 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
777 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
778 | }; |
779 | ||
780 | fimc_1: fimc@11810000 { | |
781 | status = "okay"; | |
0357a443 SN |
782 | assigned-clocks = <&clock CLK_MOUT_FIMC1>, |
783 | <&clock CLK_SCLK_FIMC1>; | |
784 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
785 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
786 | }; |
787 | ||
788 | fimc_2: fimc@11820000 { | |
789 | status = "okay"; | |
0357a443 SN |
790 | assigned-clocks = <&clock CLK_MOUT_FIMC2>, |
791 | <&clock CLK_SCLK_FIMC2>; | |
792 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
793 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
794 | }; |
795 | ||
796 | fimc_3: fimc@11830000 { | |
797 | status = "okay"; | |
0357a443 SN |
798 | assigned-clocks = <&clock CLK_MOUT_FIMC3>, |
799 | <&clock CLK_SCLK_FIMC3>; | |
800 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
801 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
802 | }; |
803 | ||
4cb37864 SN |
804 | csis_0: csis@11880000 { |
805 | status = "okay"; | |
806 | vddcore-supply = <&ldo8_reg>; | |
807 | vddio-supply = <&ldo10_reg>; | |
0357a443 SN |
808 | assigned-clocks = <&clock CLK_MOUT_CSIS0>, |
809 | <&clock CLK_SCLK_CSIS0>; | |
810 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
811 | assigned-clock-rates = <0>, <176000000>; | |
4cb37864 SN |
812 | |
813 | /* Camera C (3) MIPI CSI-2 (CSIS0) */ | |
814 | port@3 { | |
815 | reg = <3>; | |
816 | csis0_ep: endpoint { | |
817 | remote-endpoint = <&s5c73m3_ep>; | |
818 | data-lanes = <1 2 3 4>; | |
819 | samsung,csis-hs-settle = <12>; | |
820 | }; | |
821 | }; | |
822 | }; | |
823 | ||
b4fec647 | 824 | csis_1: csis@11890000 { |
0357a443 | 825 | status = "okay"; |
b4fec647 SN |
826 | vddcore-supply = <&ldo8_reg>; |
827 | vddio-supply = <&ldo10_reg>; | |
0357a443 SN |
828 | assigned-clocks = <&clock CLK_MOUT_CSIS1>, |
829 | <&clock CLK_SCLK_CSIS1>; | |
830 | assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; | |
831 | assigned-clock-rates = <0>, <176000000>; | |
b4fec647 SN |
832 | |
833 | /* Camera D (4) MIPI CSI-2 (CSIS1) */ | |
834 | port@4 { | |
835 | reg = <4>; | |
836 | csis1_ep: endpoint { | |
837 | remote-endpoint = <&is_s5k6a3_ep>; | |
838 | data-lanes = <1>; | |
839 | samsung,csis-hs-settle = <18>; | |
840 | samsung,csis-wclk; | |
841 | }; | |
842 | }; | |
843 | }; | |
844 | ||
845 | fimc_lite_0: fimc-lite@12390000 { | |
846 | status = "okay"; | |
847 | }; | |
848 | ||
849 | fimc_lite_1: fimc-lite@123A0000 { | |
850 | status = "okay"; | |
851 | }; | |
852 | ||
853 | fimc-is@12000000 { | |
854 | pinctrl-0 = <&fimc_is_uart>; | |
855 | pinctrl-names = "default"; | |
856 | status = "okay"; | |
857 | ||
858 | i2c1_isp: i2c-isp@12140000 { | |
859 | pinctrl-0 = <&fimc_is_i2c1>; | |
860 | pinctrl-names = "default"; | |
861 | ||
862 | s5k6a3@10 { | |
863 | compatible = "samsung,s5k6a3"; | |
864 | reg = <0x10>; | |
865 | svdda-supply = <&cam_io_reg>; | |
866 | svddio-supply = <&ldo19_reg>; | |
ee5eda64 | 867 | afvdd-supply = <&ldo19_reg>; |
b4fec647 SN |
868 | clock-frequency = <24000000>; |
869 | /* CAM_B_CLKOUT */ | |
ee5eda64 SN |
870 | clocks = <&camera 1>; |
871 | clock-names = "extclk"; | |
b4fec647 SN |
872 | samsung,camclk-out = <1>; |
873 | gpios = <&gpm1 6 0>; | |
874 | ||
875 | port { | |
876 | is_s5k6a3_ep: endpoint { | |
877 | remote-endpoint = <&csis1_ep>; | |
878 | data-lanes = <1>; | |
879 | }; | |
880 | }; | |
881 | }; | |
882 | }; | |
883 | }; | |
884 | }; | |
4f423788 | 885 | |
440e5aef IS |
886 | i2s0: i2s@03830000 { |
887 | pinctrl-0 = <&i2s0_bus>; | |
888 | pinctrl-names = "default"; | |
889 | status = "okay"; | |
890 | }; | |
891 | ||
892 | sound { | |
893 | compatible = "samsung,trats2-audio"; | |
894 | samsung,i2s-controller = <&i2s0>; | |
895 | samsung,model = "Trats2"; | |
896 | samsung,audio-codec = <&wm1811>; | |
897 | samsung,audio-routing = | |
898 | "SPK", "SPKOUTLN", | |
899 | "SPK", "SPKOUTLP", | |
900 | "SPK", "SPKOUTRN", | |
901 | "SPK", "SPKOUTRP"; | |
902 | }; | |
903 | ||
3c8977f1 CP |
904 | exynos-usbphy@125B0000 { |
905 | status = "okay"; | |
906 | }; | |
907 | ||
908 | hsotg@12480000 { | |
909 | vusb_d-supply = <&ldo15_reg>; | |
910 | vusb_a-supply = <&ldo12_reg>; | |
32f144f2 | 911 | dr_mode = "peripheral"; |
3c8977f1 CP |
912 | status = "okay"; |
913 | }; | |
914 | ||
4f423788 CC |
915 | thermistor-ap@0 { |
916 | compatible = "ntc,ncp15wb473"; | |
917 | pullup-uv = <1800000>; /* VCC_1.8V_AP */ | |
918 | pullup-ohm = <100000>; /* 100K */ | |
919 | pulldown-ohm = <100000>; /* 100K */ | |
920 | io-channels = <&adc 1>; /* AP temperature */ | |
921 | }; | |
922 | ||
923 | thermistor-battery@1 { | |
924 | compatible = "ntc,ncp15wb473"; | |
925 | pullup-uv = <1800000>; /* VCC_1.8V_AP */ | |
926 | pullup-ohm = <100000>; /* 100K */ | |
927 | pulldown-ohm = <100000>; /* 100K */ | |
928 | io-channels = <&adc 2>; /* Battery temperature */ | |
929 | }; | |
bf4a0bed LM |
930 | |
931 | thermal-zones { | |
932 | cpu_thermal: cpu-thermal { | |
933 | cooling-maps { | |
934 | map0 { | |
935 | /* Corresponds to 800MHz at freq_table */ | |
936 | cooling-device = <&cpu0 7 7>; | |
937 | }; | |
938 | map1 { | |
939 | /* Corresponds to 200MHz at freq_table */ | |
940 | cooling-device = <&cpu0 13 13>; | |
941 | }; | |
942 | }; | |
943 | }; | |
944 | }; | |
15dfdfad | 945 | }; |
09918a98 | 946 | |
440e5aef IS |
947 | &pmu_system_controller { |
948 | assigned-clocks = <&pmu_system_controller 0>; | |
949 | assigned-clock-parents = <&clock CLK_XUSBXTI>; | |
950 | }; | |
951 | ||
7808cae3 CC |
952 | &ppmu_dmc0 { |
953 | status = "okay"; | |
954 | ||
955 | events { | |
956 | ppmu_dmc0_3: ppmu-event3-dmc0 { | |
957 | event-name = "ppmu-event3-dmc0"; | |
958 | }; | |
959 | }; | |
960 | }; | |
961 | ||
962 | &ppmu_dmc1 { | |
963 | status = "okay"; | |
964 | ||
965 | events { | |
966 | ppmu_dmc1_3: ppmu-event3-dmc1 { | |
967 | event-name = "ppmu-event3-dmc1"; | |
968 | }; | |
969 | }; | |
970 | }; | |
971 | ||
972 | &ppmu_leftbus { | |
973 | status = "okay"; | |
974 | ||
975 | events { | |
976 | ppmu_leftbus_3: ppmu-event3-leftbus { | |
977 | event-name = "ppmu-event3-leftbus"; | |
978 | }; | |
979 | }; | |
980 | }; | |
981 | ||
982 | &ppmu_rightbus { | |
983 | status = "okay"; | |
984 | ||
985 | events { | |
986 | ppmu_rightbus_3: ppmu-event3-rightbus { | |
987 | event-name = "ppmu-event3-rightbus"; | |
988 | }; | |
989 | }; | |
990 | }; | |
991 | ||
09918a98 TF |
992 | &pinctrl_0 { |
993 | pinctrl-names = "default"; | |
994 | pinctrl-0 = <&sleep0>; | |
995 | ||
996 | sleep0: sleep-states { | |
997 | PIN_SLP(gpa0-0, INPUT, NONE); | |
998 | PIN_SLP(gpa0-1, OUT0, NONE); | |
999 | PIN_SLP(gpa0-2, INPUT, NONE); | |
1000 | PIN_SLP(gpa0-3, INPUT, UP); | |
1001 | PIN_SLP(gpa0-4, INPUT, NONE); | |
1002 | PIN_SLP(gpa0-5, INPUT, DOWN); | |
1003 | PIN_SLP(gpa0-6, INPUT, DOWN); | |
1004 | PIN_SLP(gpa0-7, INPUT, UP); | |
1005 | ||
1006 | PIN_SLP(gpa1-0, INPUT, DOWN); | |
1007 | PIN_SLP(gpa1-1, INPUT, DOWN); | |
1008 | PIN_SLP(gpa1-2, INPUT, DOWN); | |
1009 | PIN_SLP(gpa1-3, INPUT, DOWN); | |
1010 | PIN_SLP(gpa1-4, INPUT, DOWN); | |
1011 | PIN_SLP(gpa1-5, INPUT, DOWN); | |
1012 | ||
1013 | PIN_SLP(gpb-0, INPUT, NONE); | |
1014 | PIN_SLP(gpb-1, INPUT, NONE); | |
1015 | PIN_SLP(gpb-2, INPUT, NONE); | |
1016 | PIN_SLP(gpb-3, INPUT, NONE); | |
1017 | PIN_SLP(gpb-4, INPUT, DOWN); | |
1018 | PIN_SLP(gpb-5, INPUT, UP); | |
1019 | PIN_SLP(gpb-6, INPUT, DOWN); | |
1020 | PIN_SLP(gpb-7, INPUT, DOWN); | |
1021 | ||
1022 | PIN_SLP(gpc0-0, INPUT, DOWN); | |
1023 | PIN_SLP(gpc0-1, INPUT, DOWN); | |
1024 | PIN_SLP(gpc0-2, INPUT, DOWN); | |
1025 | PIN_SLP(gpc0-3, INPUT, DOWN); | |
1026 | PIN_SLP(gpc0-4, INPUT, DOWN); | |
1027 | ||
1028 | PIN_SLP(gpc1-0, INPUT, NONE); | |
1029 | PIN_SLP(gpc1-1, PREV, NONE); | |
1030 | PIN_SLP(gpc1-2, INPUT, NONE); | |
1031 | PIN_SLP(gpc1-3, INPUT, NONE); | |
1032 | PIN_SLP(gpc1-4, INPUT, NONE); | |
1033 | ||
1034 | PIN_SLP(gpd0-0, INPUT, DOWN); | |
1035 | PIN_SLP(gpd0-1, INPUT, DOWN); | |
1036 | PIN_SLP(gpd0-2, INPUT, NONE); | |
1037 | PIN_SLP(gpd0-3, INPUT, NONE); | |
1038 | ||
1039 | PIN_SLP(gpd1-0, INPUT, DOWN); | |
1040 | PIN_SLP(gpd1-1, INPUT, DOWN); | |
1041 | PIN_SLP(gpd1-2, INPUT, NONE); | |
1042 | PIN_SLP(gpd1-3, INPUT, NONE); | |
1043 | ||
1044 | PIN_SLP(gpf0-0, INPUT, NONE); | |
1045 | PIN_SLP(gpf0-1, INPUT, NONE); | |
1046 | PIN_SLP(gpf0-2, INPUT, DOWN); | |
1047 | PIN_SLP(gpf0-3, INPUT, DOWN); | |
1048 | PIN_SLP(gpf0-4, INPUT, NONE); | |
1049 | PIN_SLP(gpf0-5, INPUT, DOWN); | |
1050 | PIN_SLP(gpf0-6, INPUT, NONE); | |
1051 | PIN_SLP(gpf0-7, INPUT, DOWN); | |
1052 | ||
1053 | PIN_SLP(gpf1-0, INPUT, DOWN); | |
1054 | PIN_SLP(gpf1-1, INPUT, DOWN); | |
1055 | PIN_SLP(gpf1-2, INPUT, DOWN); | |
1056 | PIN_SLP(gpf1-3, INPUT, DOWN); | |
1057 | PIN_SLP(gpf1-4, INPUT, NONE); | |
1058 | PIN_SLP(gpf1-5, INPUT, NONE); | |
1059 | PIN_SLP(gpf1-6, INPUT, DOWN); | |
1060 | PIN_SLP(gpf1-7, PREV, NONE); | |
1061 | ||
1062 | PIN_SLP(gpf2-0, PREV, NONE); | |
1063 | PIN_SLP(gpf2-1, INPUT, DOWN); | |
1064 | PIN_SLP(gpf2-2, INPUT, DOWN); | |
1065 | PIN_SLP(gpf2-3, INPUT, DOWN); | |
1066 | PIN_SLP(gpf2-4, INPUT, DOWN); | |
1067 | PIN_SLP(gpf2-5, INPUT, DOWN); | |
1068 | PIN_SLP(gpf2-6, INPUT, NONE); | |
1069 | PIN_SLP(gpf2-7, INPUT, NONE); | |
1070 | ||
1071 | PIN_SLP(gpf3-0, INPUT, NONE); | |
1072 | PIN_SLP(gpf3-1, PREV, NONE); | |
1073 | PIN_SLP(gpf3-2, PREV, NONE); | |
1074 | PIN_SLP(gpf3-3, PREV, NONE); | |
1075 | PIN_SLP(gpf3-4, OUT1, NONE); | |
1076 | PIN_SLP(gpf3-5, INPUT, DOWN); | |
1077 | ||
1078 | PIN_SLP(gpj0-0, PREV, NONE); | |
1079 | PIN_SLP(gpj0-1, PREV, NONE); | |
1080 | PIN_SLP(gpj0-2, PREV, NONE); | |
1081 | PIN_SLP(gpj0-3, INPUT, DOWN); | |
1082 | PIN_SLP(gpj0-4, PREV, NONE); | |
1083 | PIN_SLP(gpj0-5, PREV, NONE); | |
1084 | PIN_SLP(gpj0-6, INPUT, DOWN); | |
1085 | PIN_SLP(gpj0-7, INPUT, DOWN); | |
1086 | ||
1087 | PIN_SLP(gpj1-0, INPUT, DOWN); | |
1088 | PIN_SLP(gpj1-1, PREV, NONE); | |
1089 | PIN_SLP(gpj1-2, PREV, NONE); | |
1090 | PIN_SLP(gpj1-3, INPUT, DOWN); | |
1091 | PIN_SLP(gpj1-4, INPUT, DOWN); | |
1092 | }; | |
1093 | }; | |
1094 | ||
1095 | &pinctrl_1 { | |
1096 | pinctrl-names = "default"; | |
1097 | pinctrl-0 = <&sleep1>; | |
1098 | ||
1099 | sleep1: sleep-states { | |
1100 | PIN_SLP(gpk0-0, PREV, NONE); | |
1101 | PIN_SLP(gpk0-1, PREV, NONE); | |
1102 | PIN_SLP(gpk0-2, OUT0, NONE); | |
1103 | PIN_SLP(gpk0-3, PREV, NONE); | |
1104 | PIN_SLP(gpk0-4, PREV, NONE); | |
1105 | PIN_SLP(gpk0-5, PREV, NONE); | |
1106 | PIN_SLP(gpk0-6, PREV, NONE); | |
1107 | ||
1108 | PIN_SLP(gpk1-0, INPUT, DOWN); | |
1109 | PIN_SLP(gpk1-1, INPUT, DOWN); | |
1110 | PIN_SLP(gpk1-2, INPUT, DOWN); | |
1111 | PIN_SLP(gpk1-3, PREV, NONE); | |
1112 | PIN_SLP(gpk1-4, PREV, NONE); | |
1113 | PIN_SLP(gpk1-5, PREV, NONE); | |
1114 | PIN_SLP(gpk1-6, PREV, NONE); | |
1115 | ||
1116 | PIN_SLP(gpk2-0, INPUT, DOWN); | |
1117 | PIN_SLP(gpk2-1, INPUT, DOWN); | |
1118 | PIN_SLP(gpk2-2, INPUT, DOWN); | |
1119 | PIN_SLP(gpk2-3, INPUT, DOWN); | |
1120 | PIN_SLP(gpk2-4, INPUT, DOWN); | |
1121 | PIN_SLP(gpk2-5, INPUT, DOWN); | |
1122 | PIN_SLP(gpk2-6, INPUT, DOWN); | |
1123 | ||
1124 | PIN_SLP(gpk3-0, OUT0, NONE); | |
1125 | PIN_SLP(gpk3-1, INPUT, NONE); | |
1126 | PIN_SLP(gpk3-2, INPUT, DOWN); | |
1127 | PIN_SLP(gpk3-3, INPUT, NONE); | |
1128 | PIN_SLP(gpk3-4, INPUT, NONE); | |
1129 | PIN_SLP(gpk3-5, INPUT, NONE); | |
1130 | PIN_SLP(gpk3-6, INPUT, NONE); | |
1131 | ||
1132 | PIN_SLP(gpl0-0, INPUT, DOWN); | |
1133 | PIN_SLP(gpl0-1, INPUT, DOWN); | |
1134 | PIN_SLP(gpl0-2, INPUT, DOWN); | |
1135 | PIN_SLP(gpl0-3, INPUT, DOWN); | |
1136 | PIN_SLP(gpl0-4, PREV, NONE); | |
1137 | PIN_SLP(gpl0-6, PREV, NONE); | |
1138 | ||
1139 | PIN_SLP(gpl1-0, INPUT, DOWN); | |
1140 | PIN_SLP(gpl1-1, INPUT, DOWN); | |
1141 | PIN_SLP(gpl2-0, INPUT, DOWN); | |
1142 | PIN_SLP(gpl2-1, INPUT, DOWN); | |
1143 | PIN_SLP(gpl2-2, INPUT, DOWN); | |
1144 | PIN_SLP(gpl2-3, INPUT, DOWN); | |
1145 | PIN_SLP(gpl2-4, INPUT, DOWN); | |
1146 | PIN_SLP(gpl2-5, INPUT, DOWN); | |
1147 | PIN_SLP(gpl2-6, PREV, NONE); | |
1148 | PIN_SLP(gpl2-7, INPUT, DOWN); | |
1149 | ||
1150 | PIN_SLP(gpm0-0, INPUT, DOWN); | |
1151 | PIN_SLP(gpm0-1, INPUT, DOWN); | |
1152 | PIN_SLP(gpm0-2, INPUT, DOWN); | |
1153 | PIN_SLP(gpm0-3, INPUT, DOWN); | |
1154 | PIN_SLP(gpm0-4, INPUT, DOWN); | |
1155 | PIN_SLP(gpm0-5, INPUT, DOWN); | |
1156 | PIN_SLP(gpm0-6, INPUT, DOWN); | |
1157 | PIN_SLP(gpm0-7, INPUT, DOWN); | |
1158 | ||
1159 | PIN_SLP(gpm1-0, INPUT, DOWN); | |
1160 | PIN_SLP(gpm1-1, INPUT, DOWN); | |
1161 | PIN_SLP(gpm1-2, INPUT, NONE); | |
1162 | PIN_SLP(gpm1-3, INPUT, NONE); | |
1163 | PIN_SLP(gpm1-4, INPUT, NONE); | |
1164 | PIN_SLP(gpm1-5, INPUT, NONE); | |
1165 | PIN_SLP(gpm1-6, INPUT, DOWN); | |
1166 | ||
1167 | PIN_SLP(gpm2-0, INPUT, NONE); | |
1168 | PIN_SLP(gpm2-1, INPUT, NONE); | |
1169 | PIN_SLP(gpm2-2, INPUT, DOWN); | |
1170 | PIN_SLP(gpm2-3, INPUT, DOWN); | |
1171 | PIN_SLP(gpm2-4, INPUT, DOWN); | |
1172 | ||
1173 | PIN_SLP(gpm3-0, PREV, NONE); | |
1174 | PIN_SLP(gpm3-1, PREV, NONE); | |
1175 | PIN_SLP(gpm3-2, PREV, NONE); | |
1176 | PIN_SLP(gpm3-3, OUT1, NONE); | |
1177 | PIN_SLP(gpm3-4, INPUT, DOWN); | |
1178 | PIN_SLP(gpm3-5, INPUT, DOWN); | |
1179 | PIN_SLP(gpm3-6, INPUT, DOWN); | |
1180 | PIN_SLP(gpm3-7, INPUT, DOWN); | |
1181 | ||
1182 | PIN_SLP(gpm4-0, INPUT, DOWN); | |
1183 | PIN_SLP(gpm4-1, INPUT, DOWN); | |
1184 | PIN_SLP(gpm4-2, INPUT, DOWN); | |
1185 | PIN_SLP(gpm4-3, INPUT, DOWN); | |
1186 | PIN_SLP(gpm4-4, INPUT, DOWN); | |
1187 | PIN_SLP(gpm4-5, INPUT, DOWN); | |
1188 | PIN_SLP(gpm4-6, INPUT, DOWN); | |
1189 | PIN_SLP(gpm4-7, INPUT, DOWN); | |
1190 | ||
1191 | PIN_SLP(gpy0-0, INPUT, DOWN); | |
1192 | PIN_SLP(gpy0-1, INPUT, DOWN); | |
1193 | PIN_SLP(gpy0-2, INPUT, DOWN); | |
1194 | PIN_SLP(gpy0-3, INPUT, DOWN); | |
1195 | PIN_SLP(gpy0-4, INPUT, DOWN); | |
1196 | PIN_SLP(gpy0-5, INPUT, DOWN); | |
1197 | ||
1198 | PIN_SLP(gpy1-0, INPUT, DOWN); | |
1199 | PIN_SLP(gpy1-1, INPUT, DOWN); | |
1200 | PIN_SLP(gpy1-2, INPUT, DOWN); | |
1201 | PIN_SLP(gpy1-3, INPUT, DOWN); | |
1202 | ||
1203 | PIN_SLP(gpy2-0, PREV, NONE); | |
1204 | PIN_SLP(gpy2-1, INPUT, DOWN); | |
1205 | PIN_SLP(gpy2-2, INPUT, NONE); | |
1206 | PIN_SLP(gpy2-3, INPUT, NONE); | |
1207 | PIN_SLP(gpy2-4, INPUT, NONE); | |
1208 | PIN_SLP(gpy2-5, INPUT, NONE); | |
1209 | ||
1210 | PIN_SLP(gpy3-0, INPUT, DOWN); | |
1211 | PIN_SLP(gpy3-1, INPUT, DOWN); | |
1212 | PIN_SLP(gpy3-2, INPUT, DOWN); | |
1213 | PIN_SLP(gpy3-3, INPUT, DOWN); | |
1214 | PIN_SLP(gpy3-4, INPUT, DOWN); | |
1215 | PIN_SLP(gpy3-5, INPUT, DOWN); | |
1216 | PIN_SLP(gpy3-6, INPUT, DOWN); | |
1217 | PIN_SLP(gpy3-7, INPUT, DOWN); | |
1218 | ||
1219 | PIN_SLP(gpy4-0, INPUT, DOWN); | |
1220 | PIN_SLP(gpy4-1, INPUT, DOWN); | |
1221 | PIN_SLP(gpy4-2, INPUT, DOWN); | |
1222 | PIN_SLP(gpy4-3, INPUT, DOWN); | |
1223 | PIN_SLP(gpy4-4, INPUT, DOWN); | |
1224 | PIN_SLP(gpy4-5, INPUT, DOWN); | |
1225 | PIN_SLP(gpy4-6, INPUT, DOWN); | |
1226 | PIN_SLP(gpy4-7, INPUT, DOWN); | |
1227 | ||
1228 | PIN_SLP(gpy5-0, INPUT, DOWN); | |
1229 | PIN_SLP(gpy5-1, INPUT, DOWN); | |
1230 | PIN_SLP(gpy5-2, INPUT, DOWN); | |
1231 | PIN_SLP(gpy5-3, INPUT, DOWN); | |
1232 | PIN_SLP(gpy5-4, INPUT, DOWN); | |
1233 | PIN_SLP(gpy5-5, INPUT, DOWN); | |
1234 | PIN_SLP(gpy5-6, INPUT, DOWN); | |
1235 | PIN_SLP(gpy5-7, INPUT, DOWN); | |
1236 | ||
1237 | PIN_SLP(gpy6-0, INPUT, DOWN); | |
1238 | PIN_SLP(gpy6-1, INPUT, DOWN); | |
1239 | PIN_SLP(gpy6-2, INPUT, DOWN); | |
1240 | PIN_SLP(gpy6-3, INPUT, DOWN); | |
1241 | PIN_SLP(gpy6-4, INPUT, DOWN); | |
1242 | PIN_SLP(gpy6-5, INPUT, DOWN); | |
1243 | PIN_SLP(gpy6-6, INPUT, DOWN); | |
1244 | PIN_SLP(gpy6-7, INPUT, DOWN); | |
1245 | }; | |
1246 | }; | |
1247 | ||
1248 | &pinctrl_2 { | |
1249 | pinctrl-names = "default"; | |
1250 | pinctrl-0 = <&sleep2>; | |
1251 | ||
1252 | sleep2: sleep-states { | |
1253 | PIN_SLP(gpz-0, INPUT, DOWN); | |
1254 | PIN_SLP(gpz-1, INPUT, DOWN); | |
1255 | PIN_SLP(gpz-2, INPUT, DOWN); | |
1256 | PIN_SLP(gpz-3, INPUT, DOWN); | |
1257 | PIN_SLP(gpz-4, INPUT, DOWN); | |
1258 | PIN_SLP(gpz-5, INPUT, DOWN); | |
1259 | PIN_SLP(gpz-6, INPUT, DOWN); | |
1260 | }; | |
1261 | }; | |
1262 | ||
1263 | &pinctrl_3 { | |
1264 | pinctrl-names = "default"; | |
1265 | pinctrl-0 = <&sleep3>; | |
1266 | ||
1267 | sleep3: sleep-states { | |
1268 | PIN_SLP(gpv0-0, INPUT, DOWN); | |
1269 | PIN_SLP(gpv0-1, INPUT, DOWN); | |
1270 | PIN_SLP(gpv0-2, INPUT, DOWN); | |
1271 | PIN_SLP(gpv0-3, INPUT, DOWN); | |
1272 | PIN_SLP(gpv0-4, INPUT, DOWN); | |
1273 | PIN_SLP(gpv0-5, INPUT, DOWN); | |
1274 | PIN_SLP(gpv0-6, INPUT, DOWN); | |
1275 | PIN_SLP(gpv0-7, INPUT, DOWN); | |
1276 | ||
1277 | PIN_SLP(gpv1-0, INPUT, DOWN); | |
1278 | PIN_SLP(gpv1-1, INPUT, DOWN); | |
1279 | PIN_SLP(gpv1-2, INPUT, DOWN); | |
1280 | PIN_SLP(gpv1-3, INPUT, DOWN); | |
1281 | PIN_SLP(gpv1-4, INPUT, DOWN); | |
1282 | PIN_SLP(gpv1-5, INPUT, DOWN); | |
1283 | PIN_SLP(gpv1-6, INPUT, DOWN); | |
1284 | PIN_SLP(gpv1-7, INPUT, DOWN); | |
1285 | ||
1286 | PIN_SLP(gpv2-0, INPUT, DOWN); | |
1287 | PIN_SLP(gpv2-1, INPUT, DOWN); | |
1288 | PIN_SLP(gpv2-2, INPUT, DOWN); | |
1289 | PIN_SLP(gpv2-3, INPUT, DOWN); | |
1290 | PIN_SLP(gpv2-4, INPUT, DOWN); | |
1291 | PIN_SLP(gpv2-5, INPUT, DOWN); | |
1292 | PIN_SLP(gpv2-6, INPUT, DOWN); | |
1293 | PIN_SLP(gpv2-7, INPUT, DOWN); | |
1294 | ||
1295 | PIN_SLP(gpv3-0, INPUT, DOWN); | |
1296 | PIN_SLP(gpv3-1, INPUT, DOWN); | |
1297 | PIN_SLP(gpv3-2, INPUT, DOWN); | |
1298 | PIN_SLP(gpv3-3, INPUT, DOWN); | |
1299 | PIN_SLP(gpv3-4, INPUT, DOWN); | |
1300 | PIN_SLP(gpv3-5, INPUT, DOWN); | |
1301 | PIN_SLP(gpv3-6, INPUT, DOWN); | |
1302 | PIN_SLP(gpv3-7, INPUT, DOWN); | |
1303 | ||
1304 | PIN_SLP(gpv4-0, INPUT, DOWN); | |
1305 | }; | |
1306 | }; |