]>
Commit | Line | Data |
---|---|---|
cc4637f7 | 1 | // SPDX-License-Identifier: GPL-2.0 |
6c6000c2 JMC |
2 | /* |
3 | * Google Snow board device tree source | |
4 | * | |
5 | * Copyright (c) 2012 Google, Inc | |
6c6000c2 JMC |
6 | */ |
7 | ||
8 | #include <dt-bindings/gpio/gpio.h> | |
9 | #include <dt-bindings/clock/maxim,max77686.h> | |
10 | #include <dt-bindings/interrupt-controller/irq.h> | |
11 | #include <dt-bindings/input/input.h> | |
6ab56993 | 12 | #include <dt-bindings/sound/samsung-i2s.h> |
6c6000c2 JMC |
13 | #include "exynos5250.dtsi" |
14 | ||
15 | / { | |
16 | aliases { | |
17 | i2c104 = &i2c_104; | |
18 | }; | |
19 | ||
a0eb1095 | 20 | memory@40000000 { |
12676ee1 | 21 | device_type = "memory"; |
6c6000c2 JMC |
22 | reg = <0x40000000 0x80000000>; |
23 | }; | |
24 | ||
25 | chosen { | |
26 | bootargs = "console=tty1"; | |
27 | stdout-path = "serial3:115200n8"; | |
28 | }; | |
29 | ||
30 | gpio-keys { | |
31 | compatible = "gpio-keys"; | |
32 | pinctrl-names = "default"; | |
33 | pinctrl-0 = <&power_key_irq &lid_irq>; | |
34 | ||
35 | power { | |
36 | label = "Power"; | |
37 | gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; | |
38 | linux,code = <KEY_POWER>; | |
36a0282a | 39 | wakeup-source; |
6c6000c2 JMC |
40 | }; |
41 | ||
42 | lid-switch { | |
43 | label = "Lid"; | |
44 | gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; | |
45 | linux,input-type = <5>; /* EV_SW */ | |
46 | linux,code = <0>; /* SW_LID */ | |
47 | debounce-interval = <1>; | |
36a0282a | 48 | wakeup-source; |
6c6000c2 JMC |
49 | }; |
50 | }; | |
51 | ||
52 | vbat: vbat-fixed-regulator { | |
53 | compatible = "regulator-fixed"; | |
54 | regulator-name = "vbat-supply"; | |
55 | regulator-boot-on; | |
56 | }; | |
57 | ||
58 | i2c-arbitrator { | |
59 | compatible = "i2c-arb-gpio-challenge"; | |
60 | #address-cells = <1>; | |
61 | #size-cells = <0>; | |
62 | ||
e3daf8e5 | 63 | i2c-parent = <&i2c_4>; |
6c6000c2 JMC |
64 | |
65 | our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; | |
66 | their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; | |
67 | slew-delay-us = <10>; | |
68 | wait-retry-us = <3000>; | |
69 | wait-free-us = <50000>; | |
70 | ||
71 | pinctrl-names = "default"; | |
72 | pinctrl-0 = <&arb_our_claim &arb_their_claim>; | |
73 | ||
74 | /* Use ID 104 as a hint that we're on physical bus 4 */ | |
75 | i2c_104: i2c@0 { | |
76 | reg = <0>; | |
77 | #address-cells = <1>; | |
78 | #size-cells = <0>; | |
79 | ||
80 | battery: sbs-battery@b { | |
81 | compatible = "sbs,sbs-battery"; | |
82 | reg = <0xb>; | |
83 | sbs,poll-retry-count = <1>; | |
84 | }; | |
85 | ||
5c9cbade | 86 | cros_ec: embedded-controller@1e { |
6c6000c2 JMC |
87 | compatible = "google,cros-ec-i2c"; |
88 | reg = <0x1e>; | |
89 | interrupts = <6 IRQ_TYPE_NONE>; | |
90 | interrupt-parent = <&gpx1>; | |
91 | pinctrl-names = "default"; | |
92 | pinctrl-0 = <&ec_irq>; | |
93 | wakeup-source; | |
94 | }; | |
95 | ||
5c9cbade | 96 | power-regulator@48 { |
6c6000c2 JMC |
97 | compatible = "ti,tps65090"; |
98 | reg = <0x48>; | |
99 | ||
100 | /* | |
101 | * Config irq to disable internal pulls | |
102 | * even though we run in polling mode. | |
103 | */ | |
104 | pinctrl-names = "default"; | |
105 | pinctrl-0 = <&tps65090_irq>; | |
106 | ||
107 | vsys1-supply = <&vbat>; | |
108 | vsys2-supply = <&vbat>; | |
109 | vsys3-supply = <&vbat>; | |
110 | infet1-supply = <&vbat>; | |
111 | infet2-supply = <&vbat>; | |
112 | infet3-supply = <&vbat>; | |
113 | infet4-supply = <&vbat>; | |
114 | infet5-supply = <&vbat>; | |
115 | infet6-supply = <&vbat>; | |
116 | infet7-supply = <&vbat>; | |
117 | vsys-l1-supply = <&vbat>; | |
118 | vsys-l2-supply = <&vbat>; | |
119 | ||
120 | regulators { | |
121 | dcdc1 { | |
122 | ti,enable-ext-control; | |
123 | }; | |
124 | dcdc2 { | |
125 | ti,enable-ext-control; | |
126 | }; | |
127 | dcdc3 { | |
128 | ti,enable-ext-control; | |
129 | }; | |
130 | fet1: fet1 { | |
131 | regulator-name = "vcd_led"; | |
132 | ti,overcurrent-wait = <3>; | |
133 | }; | |
134 | tps65090_fet2: fet2 { | |
135 | regulator-name = "video_mid"; | |
136 | regulator-always-on; | |
137 | ti,overcurrent-wait = <3>; | |
138 | }; | |
139 | fet3 { | |
140 | regulator-name = "wwan_r"; | |
141 | regulator-always-on; | |
142 | ti,overcurrent-wait = <3>; | |
143 | }; | |
144 | fet4 { | |
145 | regulator-name = "sdcard"; | |
146 | ti,overcurrent-wait = <3>; | |
147 | }; | |
148 | fet5 { | |
149 | regulator-name = "camout"; | |
150 | regulator-always-on; | |
151 | ti,overcurrent-wait = <3>; | |
152 | }; | |
153 | fet6: fet6 { | |
154 | regulator-name = "lcd_vdd"; | |
155 | ti,overcurrent-wait = <3>; | |
156 | }; | |
157 | tps65090_fet7: fet7 { | |
158 | regulator-name = "video_mid_1a"; | |
159 | regulator-always-on; | |
160 | ti,overcurrent-wait = <3>; | |
161 | }; | |
162 | ldo1 { | |
163 | }; | |
164 | ldo2 { | |
165 | }; | |
166 | }; | |
167 | ||
168 | charger { | |
169 | compatible = "ti,tps65090-charger"; | |
170 | }; | |
171 | }; | |
172 | }; | |
173 | }; | |
174 | ||
175 | sound { | |
176 | samsung,i2s-controller = <&i2s0>; | |
177 | }; | |
178 | ||
179 | usb3_vbus_reg: regulator-usb3 { | |
180 | compatible = "regulator-fixed"; | |
181 | regulator-name = "P5.0V_USB3CON"; | |
182 | regulator-min-microvolt = <5000000>; | |
183 | regulator-max-microvolt = <5000000>; | |
184 | gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; | |
185 | pinctrl-names = "default"; | |
186 | pinctrl-0 = <&usb3_vbus_en>; | |
187 | enable-active-high; | |
188 | }; | |
189 | ||
190 | fixed-rate-clocks { | |
191 | xxti { | |
192 | compatible = "samsung,clock-xxti"; | |
193 | clock-frequency = <24000000>; | |
194 | }; | |
195 | }; | |
196 | ||
197 | backlight: backlight { | |
198 | compatible = "pwm-backlight"; | |
199 | pwms = <&pwm 0 1000000 0>; | |
200 | brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; | |
201 | default-brightness-level = <7>; | |
202 | enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; | |
203 | power-supply = <&fet1>; | |
204 | pinctrl-0 = <&pwm0_out>; | |
205 | pinctrl-names = "default"; | |
206 | }; | |
207 | ||
208 | panel: panel { | |
209 | compatible = "auo,b116xw03"; | |
210 | power-supply = <&fet6>; | |
211 | backlight = <&backlight>; | |
212 | ||
213 | port { | |
214 | panel_in: endpoint { | |
215 | remote-endpoint = <&bridge_out>; | |
216 | }; | |
217 | }; | |
218 | }; | |
219 | ||
220 | mmc3_pwrseq: mmc3_pwrseq { | |
221 | compatible = "mmc-pwrseq-simple"; | |
222 | reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ | |
223 | <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ | |
224 | clocks = <&max77686 MAX77686_CLK_PMIC>; | |
225 | clock-names = "ext_clock"; | |
226 | }; | |
227 | }; | |
228 | ||
c7d59e4b SN |
229 | &clock { |
230 | assigned-clocks = <&clock CLK_FOUT_EPLL>; | |
231 | assigned-clock-rates = <49152000>; | |
232 | }; | |
233 | ||
234 | &clock_audss { | |
235 | assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; | |
236 | assigned-clock-parents = <&clock CLK_FOUT_EPLL>; | |
237 | }; | |
238 | ||
6c6000c2 JMC |
239 | &cpu0 { |
240 | cpu0-supply = <&buck2_reg>; | |
241 | }; | |
242 | ||
243 | &dp { | |
244 | status = "okay"; | |
245 | pinctrl-names = "default"; | |
246 | pinctrl-0 = <&dp_hpd>; | |
247 | samsung,color-space = <0>; | |
6c6000c2 JMC |
248 | samsung,color-depth = <1>; |
249 | samsung,link-rate = <0x0a>; | |
250 | samsung,lane-count = <2>; | |
12315576 | 251 | hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; |
6c6000c2 JMC |
252 | |
253 | ports { | |
2969c037 | 254 | port { |
6c6000c2 JMC |
255 | dp_out: endpoint { |
256 | remote-endpoint = <&bridge_in>; | |
257 | }; | |
258 | }; | |
259 | }; | |
260 | }; | |
261 | ||
262 | &ehci { | |
263 | samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; | |
264 | }; | |
265 | ||
266 | &fimd { | |
267 | status = "okay"; | |
268 | samsung,invert-vclk; | |
269 | }; | |
270 | ||
271 | &hdmi { | |
e96849e3 | 272 | status = "okay"; |
05b01dd9 | 273 | hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
6c6000c2 JMC |
274 | pinctrl-names = "default"; |
275 | pinctrl-0 = <&hdmi_hpd_irq>; | |
6c6000c2 JMC |
276 | ddc = <&i2c_2>; |
277 | hdmi-en-supply = <&tps65090_fet7>; | |
278 | vdd-supply = <&ldo8_reg>; | |
279 | vdd_osc-supply = <&ldo10_reg>; | |
280 | vdd_pll-supply = <&ldo8_reg>; | |
281 | }; | |
282 | ||
5343b157 MS |
283 | &hdmicec { |
284 | status = "okay"; | |
285 | }; | |
286 | ||
6c6000c2 JMC |
287 | &i2c_0 { |
288 | status = "okay"; | |
289 | samsung,i2c-sda-delay = <100>; | |
290 | samsung,i2c-max-bus-freq = <378000>; | |
291 | ||
8dccafaa | 292 | max77686: max77686@9 { |
6c6000c2 JMC |
293 | compatible = "maxim,max77686"; |
294 | interrupt-parent = <&gpx3>; | |
295 | interrupts = <2 IRQ_TYPE_NONE>; | |
296 | pinctrl-names = "default"; | |
297 | pinctrl-0 = <&max77686_irq>; | |
298 | wakeup-source; | |
299 | reg = <0x09>; | |
300 | #clock-cells = <1>; | |
301 | ||
302 | voltage-regulators { | |
303 | ldo1_reg: LDO1 { | |
304 | regulator-name = "P1.0V_LDO_OUT1"; | |
305 | regulator-min-microvolt = <1000000>; | |
306 | regulator-max-microvolt = <1000000>; | |
307 | regulator-always-on; | |
308 | }; | |
309 | ||
310 | ldo2_reg: LDO2 { | |
311 | regulator-name = "P1.8V_LDO_OUT2"; | |
312 | regulator-min-microvolt = <1800000>; | |
313 | regulator-max-microvolt = <1800000>; | |
314 | regulator-always-on; | |
315 | }; | |
316 | ||
317 | ldo3_reg: LDO3 { | |
318 | regulator-name = "P1.8V_LDO_OUT3"; | |
319 | regulator-min-microvolt = <1800000>; | |
320 | regulator-max-microvolt = <1800000>; | |
321 | regulator-always-on; | |
322 | }; | |
323 | ||
324 | ldo7_reg: LDO7 { | |
325 | regulator-name = "P1.1V_LDO_OUT7"; | |
326 | regulator-min-microvolt = <1100000>; | |
327 | regulator-max-microvolt = <1100000>; | |
328 | regulator-always-on; | |
329 | }; | |
330 | ||
331 | ldo8_reg: LDO8 { | |
332 | regulator-name = "P1.0V_LDO_OUT8"; | |
333 | regulator-min-microvolt = <1000000>; | |
334 | regulator-max-microvolt = <1000000>; | |
335 | regulator-always-on; | |
336 | }; | |
337 | ||
338 | ldo10_reg: LDO10 { | |
339 | regulator-name = "P1.8V_LDO_OUT10"; | |
340 | regulator-min-microvolt = <1800000>; | |
341 | regulator-max-microvolt = <1800000>; | |
342 | regulator-always-on; | |
343 | }; | |
344 | ||
345 | ldo12_reg: LDO12 { | |
346 | regulator-name = "P3.0V_LDO_OUT12"; | |
347 | regulator-min-microvolt = <3000000>; | |
348 | regulator-max-microvolt = <3000000>; | |
349 | regulator-always-on; | |
350 | }; | |
351 | ||
352 | ldo14_reg: LDO14 { | |
353 | regulator-name = "P1.8V_LDO_OUT14"; | |
354 | regulator-min-microvolt = <1800000>; | |
355 | regulator-max-microvolt = <1800000>; | |
356 | regulator-always-on; | |
357 | }; | |
358 | ||
359 | ldo15_reg: LDO15 { | |
360 | regulator-name = "P1.0V_LDO_OUT15"; | |
361 | regulator-min-microvolt = <1000000>; | |
362 | regulator-max-microvolt = <1000000>; | |
363 | regulator-always-on; | |
364 | }; | |
365 | ||
366 | ldo16_reg: LDO16 { | |
367 | regulator-name = "P1.8V_LDO_OUT16"; | |
368 | regulator-min-microvolt = <1800000>; | |
369 | regulator-max-microvolt = <1800000>; | |
370 | regulator-always-on; | |
371 | }; | |
372 | ||
373 | buck1_reg: BUCK1 { | |
374 | regulator-name = "vdd_mif"; | |
375 | regulator-min-microvolt = <950000>; | |
376 | regulator-max-microvolt = <1300000>; | |
377 | regulator-always-on; | |
378 | regulator-boot-on; | |
379 | }; | |
380 | ||
381 | buck2_reg: BUCK2 { | |
382 | regulator-name = "vdd_arm"; | |
383 | regulator-min-microvolt = <850000>; | |
384 | regulator-max-microvolt = <1350000>; | |
385 | regulator-always-on; | |
386 | regulator-boot-on; | |
387 | }; | |
388 | ||
389 | buck3_reg: BUCK3 { | |
390 | regulator-name = "vdd_int"; | |
391 | regulator-min-microvolt = <900000>; | |
392 | regulator-max-microvolt = <1200000>; | |
393 | regulator-always-on; | |
394 | regulator-boot-on; | |
395 | }; | |
396 | ||
397 | buck4_reg: BUCK4 { | |
398 | regulator-name = "vdd_g3d"; | |
399 | regulator-min-microvolt = <850000>; | |
400 | regulator-max-microvolt = <1300000>; | |
401 | regulator-always-on; | |
402 | regulator-boot-on; | |
403 | }; | |
404 | ||
405 | buck5_reg: BUCK5 { | |
406 | regulator-name = "P1.8V_BUCK_OUT5"; | |
407 | regulator-min-microvolt = <1800000>; | |
408 | regulator-max-microvolt = <1800000>; | |
409 | regulator-always-on; | |
410 | regulator-boot-on; | |
411 | }; | |
412 | ||
413 | buck6_reg: BUCK6 { | |
414 | regulator-name = "P1.35V_BUCK_OUT6"; | |
415 | regulator-min-microvolt = <1350000>; | |
416 | regulator-max-microvolt = <1350000>; | |
417 | regulator-always-on; | |
418 | }; | |
419 | ||
420 | buck7_reg: BUCK7 { | |
421 | regulator-name = "P2.0V_BUCK_OUT7"; | |
422 | regulator-min-microvolt = <2000000>; | |
423 | regulator-max-microvolt = <2000000>; | |
424 | regulator-always-on; | |
425 | }; | |
426 | ||
427 | buck8_reg: BUCK8 { | |
428 | regulator-name = "P2.85V_BUCK_OUT8"; | |
429 | regulator-min-microvolt = <2850000>; | |
430 | regulator-max-microvolt = <2850000>; | |
431 | regulator-always-on; | |
432 | }; | |
433 | }; | |
434 | }; | |
435 | }; | |
436 | ||
437 | &i2c_1 { | |
438 | status = "okay"; | |
439 | samsung,i2c-sda-delay = <100>; | |
440 | samsung,i2c-max-bus-freq = <378000>; | |
441 | ||
5c9cbade | 442 | trackpad@67 { |
6c6000c2 JMC |
443 | reg = <0x67>; |
444 | compatible = "cypress,cyapa"; | |
445 | interrupts = <2 IRQ_TYPE_NONE>; | |
446 | interrupt-parent = <&gpx1>; | |
447 | wakeup-source; | |
448 | }; | |
449 | }; | |
450 | ||
451 | /* | |
452 | * Disabled pullups since external part has its own pullups and | |
453 | * double-pulling gets us out of spec in some cases. | |
454 | */ | |
455 | &i2c2_bus { | |
d953f1fb | 456 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
6c6000c2 JMC |
457 | }; |
458 | ||
459 | &i2c_2 { | |
460 | status = "okay"; | |
c9c51fd2 | 461 | /* used by HDMI DDC */ |
6c6000c2 JMC |
462 | samsung,i2c-sda-delay = <100>; |
463 | samsung,i2c-max-bus-freq = <66000>; | |
6c6000c2 JMC |
464 | }; |
465 | ||
466 | &i2c_3 { | |
467 | status = "okay"; | |
468 | samsung,i2c-sda-delay = <100>; | |
469 | samsung,i2c-max-bus-freq = <66000>; | |
470 | }; | |
471 | ||
472 | &i2c_4 { | |
473 | status = "okay"; | |
474 | samsung,i2c-sda-delay = <100>; | |
475 | samsung,i2c-max-bus-freq = <66000>; | |
476 | }; | |
477 | ||
478 | &i2c_5 { | |
479 | status = "okay"; | |
480 | samsung,i2c-sda-delay = <100>; | |
481 | samsung,i2c-max-bus-freq = <66000>; | |
482 | }; | |
483 | ||
484 | &i2c_7 { | |
485 | status = "okay"; | |
486 | samsung,i2c-sda-delay = <100>; | |
487 | samsung,i2c-max-bus-freq = <66000>; | |
488 | ||
489 | ptn3460: lvds-bridge@20 { | |
490 | compatible = "nxp,ptn3460"; | |
491 | reg = <0x20>; | |
492 | powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; | |
493 | reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; | |
494 | edid-emulation = <5>; | |
495 | ||
496 | ports { | |
2969c037 JMC |
497 | #address-cells = <1>; |
498 | #size-cells = <0>; | |
499 | ||
500 | port@0 { | |
501 | reg = <0>; | |
502 | ||
6c6000c2 JMC |
503 | bridge_out: endpoint { |
504 | remote-endpoint = <&panel_in>; | |
505 | }; | |
506 | }; | |
507 | ||
2969c037 JMC |
508 | port@1 { |
509 | reg = <1>; | |
510 | ||
6c6000c2 JMC |
511 | bridge_in: endpoint { |
512 | remote-endpoint = <&dp_out>; | |
513 | }; | |
514 | }; | |
515 | }; | |
516 | }; | |
517 | }; | |
518 | ||
519 | &i2c_8 { | |
520 | status = "okay"; | |
c55af083 | 521 | /* used by HDMI PHY */ |
6c6000c2 JMC |
522 | samsung,i2c-sda-delay = <100>; |
523 | samsung,i2c-max-bus-freq = <378000>; | |
6c6000c2 JMC |
524 | }; |
525 | ||
526 | &i2s0 { | |
6ab56993 SN |
527 | assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; |
528 | assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; | |
6c6000c2 JMC |
529 | status = "okay"; |
530 | }; | |
531 | ||
e96849e3 MS |
532 | &mixer { |
533 | status = "okay"; | |
534 | }; | |
535 | ||
4cf98634 | 536 | /* eMMC flash */ |
6c6000c2 JMC |
537 | &mmc_0 { |
538 | status = "okay"; | |
241658f4 | 539 | non-removable; |
6c6000c2 JMC |
540 | samsung,dw-mshc-ciu-div = <3>; |
541 | samsung,dw-mshc-sdr-timing = <2 3>; | |
542 | samsung,dw-mshc-ddr-timing = <1 2>; | |
543 | pinctrl-names = "default"; | |
544 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; | |
545 | bus-width = <8>; | |
546 | cap-mmc-highspeed; | |
547 | }; | |
548 | ||
4cf98634 | 549 | /* uSD card */ |
6c6000c2 JMC |
550 | &mmc_2 { |
551 | status = "okay"; | |
6c6000c2 JMC |
552 | card-detect-delay = <200>; |
553 | samsung,dw-mshc-ciu-div = <3>; | |
554 | samsung,dw-mshc-sdr-timing = <2 3>; | |
555 | samsung,dw-mshc-ddr-timing = <1 2>; | |
556 | pinctrl-names = "default"; | |
557 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; | |
558 | bus-width = <4>; | |
559 | wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; | |
560 | cap-sd-highspeed; | |
561 | }; | |
562 | ||
563 | /* | |
564 | * On Snow we've got SIP WiFi and so can keep drive strengths low to | |
565 | * reduce EMI. | |
4cf98634 JMC |
566 | * |
567 | * WiFi SDIO module | |
6c6000c2 JMC |
568 | */ |
569 | &mmc_3 { | |
570 | status = "okay"; | |
78348272 | 571 | non-removable; |
6c6000c2 JMC |
572 | cap-sdio-irq; |
573 | keep-power-in-suspend; | |
6c6000c2 JMC |
574 | samsung,dw-mshc-ciu-div = <3>; |
575 | samsung,dw-mshc-sdr-timing = <2 3>; | |
576 | samsung,dw-mshc-ddr-timing = <1 2>; | |
577 | pinctrl-names = "default"; | |
578 | pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; | |
579 | bus-width = <4>; | |
580 | cap-sd-highspeed; | |
581 | mmc-pwrseq = <&mmc3_pwrseq>; | |
582 | }; | |
583 | ||
584 | &pinctrl_0 { | |
585 | wifi_en: wifi-en { | |
586 | samsung,pins = "gpx0-1"; | |
d953f1fb KK |
587 | samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
588 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
589 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
590 | }; |
591 | ||
592 | wifi_rst: wifi-rst { | |
593 | samsung,pins = "gpx0-2"; | |
d953f1fb KK |
594 | samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
595 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
596 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
597 | }; |
598 | ||
599 | power_key_irq: power-key-irq { | |
600 | samsung,pins = "gpx1-3"; | |
d953f1fb KK |
601 | samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
602 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
603 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
604 | }; |
605 | ||
606 | ec_irq: ec-irq { | |
607 | samsung,pins = "gpx1-6"; | |
d953f1fb KK |
608 | samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
609 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
610 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
611 | }; |
612 | ||
613 | tps65090_irq: tps65090-irq { | |
614 | samsung,pins = "gpx2-6"; | |
d953f1fb KK |
615 | samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
616 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
617 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
618 | }; |
619 | ||
620 | usb3_vbus_en: usb3-vbus-en { | |
621 | samsung,pins = "gpx2-7"; | |
d953f1fb KK |
622 | samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
623 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
624 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
625 | }; |
626 | ||
627 | max77686_irq: max77686-irq { | |
628 | samsung,pins = "gpx3-2"; | |
d953f1fb KK |
629 | samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
630 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
631 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
632 | }; |
633 | ||
634 | lid_irq: lid-irq { | |
635 | samsung,pins = "gpx3-5"; | |
d953f1fb KK |
636 | samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
637 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
638 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
639 | }; |
640 | ||
641 | hdmi_hpd_irq: hdmi-hpd-irq { | |
642 | samsung,pins = "gpx3-7"; | |
d953f1fb KK |
643 | samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
644 | samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; | |
645 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
646 | }; |
647 | }; | |
648 | ||
649 | &pinctrl_1 { | |
650 | arb_their_claim: arb-their-claim { | |
651 | samsung,pins = "gpe0-4"; | |
d953f1fb KK |
652 | samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
653 | samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; | |
654 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
655 | }; |
656 | ||
657 | arb_our_claim: arb-our-claim { | |
658 | samsung,pins = "gpf0-3"; | |
d953f1fb KK |
659 | samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
660 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
661 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
662 | }; |
663 | }; | |
664 | ||
c7d59e4b SN |
665 | &pmu_system_controller { |
666 | assigned-clocks = <&pmu_system_controller 0>; | |
667 | assigned-clock-parents = <&clock CLK_FIN_PLL>; | |
668 | }; | |
669 | ||
6c6000c2 JMC |
670 | &rtc { |
671 | status = "okay"; | |
672 | clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; | |
673 | clock-names = "rtc", "rtc_src"; | |
674 | }; | |
675 | ||
676 | &sd3_bus4 { | |
d953f1fb | 677 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
6c6000c2 JMC |
678 | }; |
679 | ||
680 | &sd3_clk { | |
d953f1fb | 681 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
6c6000c2 JMC |
682 | }; |
683 | ||
684 | &sd3_cmd { | |
d953f1fb KK |
685 | samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
686 | samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; | |
6c6000c2 JMC |
687 | }; |
688 | ||
689 | &spi_1 { | |
690 | status = "okay"; | |
691 | samsung,spi-src-clk = <0>; | |
692 | num-cs = <1>; | |
693 | cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; | |
694 | }; | |
695 | ||
696 | &usbdrd_dwc3 { | |
697 | dr_mode = "host"; | |
698 | }; | |
699 | ||
700 | &usbdrd_phy { | |
701 | vbus-supply = <&usb3_vbus_reg>; | |
702 | }; | |
703 | ||
704 | #include "cros-ec-keyboard.dtsi" |