]>
Commit | Line | Data |
---|---|---|
cc4637f7 | 1 | // SPDX-License-Identifier: GPL-2.0 |
8149afe4 KK |
2 | /* |
3 | * Hardkernel Odroid XU board device tree source | |
4 | * | |
5 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. | |
6 | * http://www.samsung.com | |
7 | * Copyright (c) 2016 Krzysztof Kozlowski | |
8149afe4 KK |
8 | */ |
9 | ||
10 | /dts-v1/; | |
11 | #include "exynos5410.dtsi" | |
88644b4c | 12 | #include <dt-bindings/clock/maxim,max77802.h> |
8149afe4 KK |
13 | #include <dt-bindings/gpio/gpio.h> |
14 | #include <dt-bindings/interrupt-controller/irq.h> | |
ad3b5ef7 | 15 | #include <dt-bindings/sound/samsung-i2s.h> |
8149afe4 KK |
16 | #include "exynos54xx-odroidxu-leds.dtsi" |
17 | ||
18 | / { | |
19 | model = "Hardkernel Odroid XU"; | |
20 | compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; | |
21 | ||
a0eb1095 | 22 | memory@40000000 { |
12676ee1 | 23 | device_type = "memory"; |
8149afe4 KK |
24 | reg = <0x40000000 0x7ea00000>; |
25 | }; | |
26 | ||
27 | chosen { | |
5a5232d1 | 28 | stdout-path = "serial2:115200n8"; |
8149afe4 KK |
29 | }; |
30 | ||
31 | emmc_pwrseq: pwrseq { | |
32 | pinctrl-0 = <&emmc_nrst_pin>; | |
33 | pinctrl-names = "default"; | |
34 | compatible = "mmc-pwrseq-emmc"; | |
35 | reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; | |
36 | }; | |
37 | ||
38 | fan0: pwm-fan { | |
39 | compatible = "pwm-fan"; | |
40 | pwms = <&pwm 0 20972 0>; | |
41 | cooling-min-state = <0>; | |
42 | cooling-max-state = <3>; | |
43 | #cooling-cells = <2>; | |
44 | cooling-levels = <0 130 170 230>; | |
45 | }; | |
46 | ||
47 | fin_pll: xxti { | |
48 | compatible = "fixed-clock"; | |
49 | clock-frequency = <24000000>; | |
50 | clock-output-names = "fin_pll"; | |
51 | #clock-cells = <0>; | |
52 | }; | |
53 | ||
8dccafaa | 54 | firmware@2073000 { |
8149afe4 KK |
55 | compatible = "samsung,secure-firmware"; |
56 | reg = <0x02073000 0x1000>; | |
57 | }; | |
ad3b5ef7 SN |
58 | |
59 | sound: sound { | |
60 | compatible = "simple-audio-card"; | |
61 | ||
62 | simple-audio-card,name = "Odroid-XU"; | |
63 | simple-audio-card,widgets = | |
64 | "Headphone", "Headphone Jack", | |
65 | "Speakers", "Speakers"; | |
66 | simple-audio-card,routing = | |
67 | "Headphone Jack", "HPL", | |
68 | "Headphone Jack", "HPR", | |
69 | "Headphone Jack", "MICBIAS", | |
70 | "IN1", "Headphone Jack", | |
71 | "Speakers", "SPKL", | |
72 | "Speakers", "SPKR"; | |
73 | ||
74 | simple-audio-card,format = "i2s"; | |
75 | simple-audio-card,bitclock-master = <&link0_codec>; | |
76 | simple-audio-card,frame-master = <&link0_codec>; | |
77 | ||
78 | simple-audio-card,cpu { | |
79 | sound-dai = <&audi2s0 0>; | |
80 | system-clock-frequency = <19200000>; | |
81 | }; | |
82 | ||
83 | link0_codec: simple-audio-card,codec { | |
84 | sound-dai = <&max98090>; | |
85 | clocks = <&audi2s0 CLK_I2S_CDCLK>; | |
86 | }; | |
87 | }; | |
88 | }; | |
89 | ||
90 | &audi2s0 { | |
91 | status = "okay"; | |
92 | }; | |
93 | ||
94 | &clock { | |
95 | clocks = <&fin_pll>; | |
96 | assigned-clocks = <&clock CLK_FOUT_EPLL>; | |
97 | assigned-clock-rates = <192000000>; | |
98 | }; | |
99 | ||
100 | &clock_audss { | |
101 | assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, | |
102 | <&clock_audss EXYNOS_MOUT_I2S>, | |
103 | <&clock_audss EXYNOS_DOUT_SRP>, | |
104 | <&clock_audss EXYNOS_DOUT_AUD_BUS>; | |
105 | ||
106 | assigned-clock-parents = <&clock CLK_FOUT_EPLL>, | |
107 | <&clock_audss EXYNOS_MOUT_AUDSS>; | |
108 | ||
109 | assigned-clock-rates = <0>, | |
110 | <0>, | |
111 | <96000000>, | |
112 | <19200000>; | |
8149afe4 KK |
113 | }; |
114 | ||
88644b4c KK |
115 | &cpu0_thermal { |
116 | thermal-sensors = <&tmu_cpu0 0>; | |
117 | polling-delay-passive = <0>; | |
118 | polling-delay = <0>; | |
119 | ||
120 | trips { | |
121 | cpu_alert0: cpu-alert-0 { | |
122 | temperature = <50000>; /* millicelsius */ | |
123 | hysteresis = <5000>; /* millicelsius */ | |
124 | type = "active"; | |
125 | }; | |
126 | cpu_alert1: cpu-alert-1 { | |
127 | temperature = <60000>; /* millicelsius */ | |
128 | hysteresis = <5000>; /* millicelsius */ | |
129 | type = "active"; | |
130 | }; | |
131 | cpu_alert2: cpu-alert-2 { | |
132 | temperature = <70000>; /* millicelsius */ | |
133 | hysteresis = <5000>; /* millicelsius */ | |
134 | type = "active"; | |
135 | }; | |
136 | cpu_crit0: cpu-crit-0 { | |
137 | temperature = <120000>; /* millicelsius */ | |
138 | hysteresis = <0>; /* millicelsius */ | |
139 | type = "critical"; | |
140 | }; | |
141 | }; | |
142 | ||
143 | cooling-maps { | |
144 | map0 { | |
145 | trip = <&cpu_alert0>; | |
146 | cooling-device = <&fan0 0 1>; | |
147 | }; | |
148 | map1 { | |
149 | trip = <&cpu_alert1>; | |
150 | cooling-device = <&fan0 1 2>; | |
151 | }; | |
152 | map2 { | |
153 | trip = <&cpu_alert2>; | |
154 | cooling-device = <&fan0 2 3>; | |
155 | }; | |
156 | }; | |
157 | }; | |
158 | ||
159 | &hsi2c_4 { | |
160 | samsung,i2c-sda-delay = <100>; | |
161 | samsung,i2c-max-bus-freq = <400000>; | |
162 | status = "okay"; | |
163 | ||
8dccafaa | 164 | usb3503: usb-hub@8 { |
88644b4c KK |
165 | compatible = "smsc,usb3503"; |
166 | reg = <0x08>; | |
167 | ||
168 | intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; | |
169 | connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; | |
170 | reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>; | |
171 | initial-mode = <1>; | |
172 | ||
173 | clock-names = "refclk"; | |
174 | clocks = <&pmu_system_controller 0>; | |
175 | refclk-frequency = <24000000>; | |
176 | }; | |
177 | ||
8dccafaa | 178 | max77802: pmic@9 { |
88644b4c KK |
179 | compatible = "maxim,max77802"; |
180 | reg = <0x9>; | |
181 | interrupt-parent = <&gpx0>; | |
182 | interrupts = <4 IRQ_TYPE_NONE>; | |
183 | pinctrl-names = "default"; | |
184 | pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>, | |
185 | <&pmic_dvs_3>; | |
186 | #clock-cells = <1>; | |
187 | ||
188 | inl1-supply = <&buck5_reg>; | |
189 | inl2-supply = <&buck7_reg>; | |
190 | inl3-supply = <&buck9_reg>; | |
191 | inl4-supply = <&buck9_reg>; | |
192 | inl5-supply = <&buck9_reg>; | |
193 | inl6-supply = <&buck10_reg>; | |
194 | inl7-supply = <&buck9_reg>; | |
195 | /* inl9 supply is BOOST, not configured here */ | |
196 | inl10-supply = <&buck7_reg>; | |
197 | ||
198 | regulators { | |
199 | buck1_reg: BUCK1 { | |
200 | regulator-name = "vdd_mif"; | |
201 | regulator-min-microvolt = <800000>; | |
202 | regulator-max-microvolt = <1300000>; | |
203 | regulator-always-on; | |
204 | regulator-boot-on; | |
205 | }; | |
206 | ||
207 | buck2_reg: BUCK2 { | |
208 | regulator-name = "vdd_arm"; | |
209 | regulator-min-microvolt = <800000>; | |
210 | regulator-max-microvolt = <1500000>; | |
211 | regulator-always-on; | |
212 | regulator-boot-on; | |
213 | }; | |
214 | ||
215 | buck3_reg: BUCK3 { | |
216 | regulator-name = "vdd_int"; | |
217 | regulator-min-microvolt = <800000>; | |
218 | regulator-max-microvolt = <1400000>; | |
219 | regulator-always-on; | |
220 | regulator-boot-on; | |
221 | }; | |
222 | ||
223 | buck4_reg: BUCK4 { | |
224 | regulator-name = "vdd_g3d"; | |
225 | regulator-min-microvolt = <800000>; | |
226 | regulator-max-microvolt = <1400000>; | |
227 | regulator-always-on; | |
228 | regulator-boot-on; | |
229 | }; | |
230 | ||
231 | buck5_reg: BUCK5 { | |
232 | regulator-name = "vdd_mem"; | |
233 | regulator-min-microvolt = <800000>; | |
234 | regulator-max-microvolt = <1500000>; | |
235 | regulator-always-on; | |
236 | regulator-boot-on; | |
237 | }; | |
238 | ||
239 | buck6_reg: BUCK6 { | |
240 | regulator-name = "vdd_kfc"; | |
241 | regulator-min-microvolt = <800000>; | |
242 | regulator-max-microvolt = <1500000>; | |
243 | regulator-always-on; | |
244 | regulator-boot-on; | |
245 | }; | |
246 | ||
247 | buck7_reg: BUCK7 { | |
248 | regulator-name = "buck7"; | |
249 | regulator-min-microvolt = <1300000>; | |
250 | regulator-max-microvolt = <1300000>; | |
251 | regulator-always-on; | |
252 | regulator-boot-on; | |
253 | }; | |
254 | ||
255 | buck8_reg: BUCK8 { | |
256 | /* vdd_mmc0 */ | |
257 | regulator-name = "vddf_2v85"; | |
258 | regulator-min-microvolt = <2850000>; | |
259 | regulator-max-microvolt = <2850000>; | |
260 | regulator-always-on; | |
261 | regulator-boot-on; | |
262 | }; | |
263 | ||
264 | buck9_reg: BUCK9 { | |
265 | regulator-name = "buck9"; | |
266 | regulator-min-microvolt = <3000000>; | |
267 | regulator-max-microvolt = <3000000>; | |
268 | regulator-always-on; | |
269 | regulator-boot-on; | |
270 | }; | |
271 | ||
272 | buck10_reg: BUCK10 { | |
273 | regulator-name = "buck10"; | |
274 | regulator-min-microvolt = <2950000>; | |
275 | regulator-max-microvolt = <2950000>; | |
276 | regulator-always-on; | |
277 | regulator-boot-on; | |
278 | }; | |
279 | ||
280 | ldo1_reg: LDO1 { | |
281 | regulator-name = "vdd_alive"; | |
282 | regulator-min-microvolt = <1000000>; | |
283 | regulator-max-microvolt = <1000000>; | |
284 | regulator-always-on; | |
285 | }; | |
286 | ||
287 | ldo2_reg: LDO2 { | |
288 | regulator-name = "vddq_m1_m2"; | |
289 | regulator-min-microvolt = <1200000>; | |
290 | regulator-max-microvolt = <1200000>; | |
291 | regulator-always-on; | |
292 | }; | |
293 | ||
294 | ldo3_reg: LDO3 { | |
295 | regulator-name = "vddq_gpio"; | |
296 | regulator-min-microvolt = <1800000>; | |
297 | regulator-max-microvolt = <1800000>; | |
298 | regulator-always-on; | |
299 | }; | |
300 | ||
301 | ldo4_reg: LDO4 { | |
302 | regulator-name = "vddq_mmc2"; | |
303 | regulator-min-microvolt = <1800000>; | |
304 | regulator-max-microvolt = <3000000>; | |
305 | /* Having it off prevents reboot */ | |
306 | regulator-always-on; | |
307 | }; | |
308 | ||
309 | ldo5_reg: LDO5 { | |
310 | regulator-name = "vdd18_hsic"; | |
311 | regulator-min-microvolt = <1800000>; | |
312 | regulator-max-microvolt = <1800000>; | |
313 | regulator-always-on; | |
314 | }; | |
315 | ||
316 | ldo6_reg: LDO6 { | |
317 | regulator-name = "vdd18_bpll"; | |
318 | regulator-min-microvolt = <1800000>; | |
319 | regulator-max-microvolt = <1800000>; | |
320 | regulator-always-on; | |
321 | }; | |
322 | ||
323 | ldo7_reg: LDO7 { | |
324 | regulator-name = "vddq_lcd"; | |
325 | regulator-min-microvolt = <1800000>; | |
326 | regulator-max-microvolt = <1800000>; | |
327 | }; | |
328 | ||
329 | ldo8_reg: LDO8 { | |
330 | regulator-name = "vdd10_hdmi"; | |
331 | regulator-min-microvolt = <1000000>; | |
332 | regulator-max-microvolt = <1000000>; | |
333 | regulator-always-on; | |
334 | }; | |
335 | ||
336 | ldo9_reg: LDO9 { | |
337 | regulator-name = "ldo9"; | |
338 | }; | |
339 | ||
340 | ldo10_reg: LDO10 { | |
341 | regulator-name = "vdd18_mipi"; | |
342 | regulator-min-microvolt = <1800000>; | |
343 | regulator-max-microvolt = <1800000>; | |
344 | regulator-always-on; | |
345 | }; | |
346 | ||
347 | ldo11_reg: LDO11 { | |
348 | regulator-name = "vddq_mmc01"; | |
349 | regulator-min-microvolt = <1800000>; | |
350 | regulator-max-microvolt = <1800000>; | |
351 | /* | |
352 | * Having it off prevents accessing MMC after | |
353 | * reboot with error: | |
354 | * MMC Device 1: Clock OFF has been failed. | |
355 | */ | |
356 | regulator-always-on; | |
357 | }; | |
358 | ||
359 | ldo12_reg: LDO12 { | |
360 | regulator-name = "vdd33_usb3"; | |
361 | regulator-min-microvolt = <3300000>; | |
362 | regulator-max-microvolt = <3300000>; | |
363 | regulator-always-on; | |
364 | }; | |
365 | ||
366 | ldo13_reg: LDO13 { | |
367 | regulator-name = "vddq_abbg0"; | |
368 | regulator-min-microvolt = <1800000>; | |
369 | regulator-max-microvolt = <1800000>; | |
370 | regulator-always-on; | |
371 | }; | |
372 | ||
373 | ldo14_reg: LDO14 { | |
374 | regulator-name = "vddq_abbg1"; | |
375 | regulator-min-microvolt = <1800000>; | |
376 | regulator-max-microvolt = <1800000>; | |
377 | regulator-always-on; | |
378 | }; | |
379 | ||
380 | ldo15_reg: LDO15 { | |
381 | regulator-name = "vdd10_usb3"; | |
382 | regulator-min-microvolt = <1000000>; | |
383 | regulator-max-microvolt = <1000000>; | |
384 | regulator-always-on; | |
385 | }; | |
386 | ||
387 | ldo16_reg: LDO16 { | |
388 | regulator-name = "ldo16"; | |
389 | }; | |
390 | ||
391 | ldo17_reg: LDO17 { | |
392 | regulator-name = "cam_sensor_core"; | |
393 | regulator-min-microvolt = <1200000>; | |
394 | regulator-max-microvolt = <1200000>; | |
395 | }; | |
396 | ||
397 | ldo18_reg: LDO18 { | |
398 | regulator-name = "ldo18"; | |
399 | regulator-min-microvolt = <1800000>; | |
400 | regulator-max-microvolt = <1800000>; | |
401 | }; | |
402 | ||
403 | ldo19_reg: LDO19 { | |
404 | regulator-name = "ldo19"; | |
405 | }; | |
406 | ||
407 | ldo20_reg: LDO20 { | |
408 | regulator-name = "vdd_mmc0"; | |
409 | regulator-min-microvolt = <1800000>; | |
410 | regulator-max-microvolt = <1800000>; | |
411 | }; | |
412 | ||
413 | ldo21_reg: LDO21 { | |
414 | /* vdd_mmc2 */ | |
415 | regulator-name = "vddf_2v8"; | |
416 | regulator-min-microvolt = <2850000>; | |
417 | regulator-max-microvolt = <2850000>; | |
418 | }; | |
419 | ||
420 | ldo22_reg: LDO22 { | |
421 | regulator-name = "ldo22"; | |
422 | }; | |
423 | ||
424 | ldo23_reg: LDO23 { | |
425 | regulator-name = "dp_p3v3"; | |
426 | regulator-min-microvolt = <3300000>; | |
427 | regulator-max-microvolt = <3300000>; | |
428 | regulator-always-on; | |
429 | }; | |
430 | ||
431 | ldo24_reg: LDO24 { | |
432 | regulator-name = "cam_af"; | |
433 | regulator-min-microvolt = <2800000>; | |
434 | regulator-max-microvolt = <2800000>; | |
435 | }; | |
436 | ||
437 | ldo25_reg: LDO25 { | |
438 | regulator-name = "eth_p3v3"; | |
439 | regulator-min-microvolt = <3300000>; | |
440 | regulator-max-microvolt = <3300000>; | |
441 | regulator-always-on; | |
442 | }; | |
443 | ||
444 | ldo26_reg: LDO26 { | |
445 | regulator-name = "usb30_extclk"; | |
446 | regulator-min-microvolt = <3300000>; | |
447 | regulator-max-microvolt = <3300000>; | |
448 | regulator-always-on; | |
449 | }; | |
450 | ||
451 | ldo27_reg: LDO27 { | |
452 | regulator-name = "ldo27"; | |
453 | }; | |
454 | ||
455 | ldo28_reg: LDO28 { | |
456 | regulator-name = "ldo28"; | |
457 | }; | |
458 | ||
459 | ldo29_reg: LDO29 { | |
460 | regulator-name = "ldo29"; | |
461 | }; | |
462 | ||
463 | ldo30_reg: LDO30 { | |
464 | regulator-name = "vddq_e1_e2"; | |
465 | regulator-min-microvolt = <1200000>; | |
466 | regulator-max-microvolt = <1200000>; | |
467 | regulator-always-on; | |
468 | }; | |
469 | ||
470 | ldo31_reg: LDO31 { | |
471 | regulator-name = "ldo31"; | |
472 | }; | |
473 | ||
474 | /* On revisions with ti,ina231 this is sensor VS */ | |
475 | ldo32_reg: LDO32 { | |
476 | regulator-name = "vs_power_meter"; | |
477 | regulator-min-microvolt = <3300000>; | |
478 | regulator-max-microvolt = <3300000>; | |
479 | }; | |
480 | ||
481 | ldo33_reg: LDO33 { | |
482 | regulator-name = "ldo33"; | |
483 | }; | |
484 | ||
485 | ldo34_reg: LDO34 { | |
486 | regulator-name = "ldo34"; | |
487 | }; | |
488 | ||
489 | ldo35_reg: LDO35 { | |
490 | regulator-name = "ldo35"; | |
491 | }; | |
492 | }; | |
493 | }; | |
494 | }; | |
495 | ||
ad3b5ef7 SN |
496 | &i2c_1 { |
497 | status = "okay"; | |
498 | max98090: max98090@10 { | |
499 | compatible = "maxim,max98090"; | |
500 | reg = <0x10>; | |
501 | interrupt-parent = <&gpj3>; | |
502 | interrupts = <0 IRQ_TYPE_NONE>; | |
503 | clocks = <&audi2s0 CLK_I2S_CDCLK>; | |
504 | clock-names = "mclk"; | |
505 | #sound-dai-cells = <0>; | |
506 | }; | |
507 | }; | |
508 | ||
8149afe4 KK |
509 | &mmc_0 { |
510 | status = "okay"; | |
511 | mmc-pwrseq = <&emmc_pwrseq>; | |
512 | cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; | |
513 | card-detect-delay = <200>; | |
514 | samsung,dw-mshc-ciu-div = <3>; | |
515 | samsung,dw-mshc-sdr-timing = <0 4>; | |
516 | samsung,dw-mshc-ddr-timing = <0 2>; | |
8149afe4 KK |
517 | pinctrl-names = "default"; |
518 | pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; | |
519 | bus-width = <8>; | |
520 | cap-mmc-highspeed; | |
521 | mmc-hs200-1_8v; | |
88644b4c KK |
522 | vmmc-supply = <&ldo20_reg>; |
523 | vqmmc-supply = <&ldo11_reg>; | |
8149afe4 KK |
524 | }; |
525 | ||
526 | &mmc_2 { | |
527 | status = "okay"; | |
528 | card-detect-delay = <200>; | |
529 | samsung,dw-mshc-ciu-div = <3>; | |
530 | samsung,dw-mshc-sdr-timing = <0 4>; | |
531 | samsung,dw-mshc-ddr-timing = <0 2>; | |
532 | pinctrl-names = "default"; | |
48ab742c | 533 | pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>; |
8149afe4 KK |
534 | bus-width = <4>; |
535 | cap-sd-highspeed; | |
88644b4c KK |
536 | vmmc-supply = <&ldo21_reg>; |
537 | vqmmc-supply = <&ldo4_reg>; | |
8149afe4 KK |
538 | }; |
539 | ||
540 | &pinctrl_0 { | |
541 | emmc_nrst_pin: emmc-nrst { | |
542 | samsung,pins = "gpd1-0"; | |
17dcc16f KK |
543 | samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
544 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
545 | samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; | |
88644b4c KK |
546 | }; |
547 | ||
48ab742c KK |
548 | sd2_wp: sd2-wp { |
549 | samsung,pins = "gpm5-0"; | |
550 | samsung,pin-function = <EXYNOS_PIN_FUNC_2>; | |
551 | /* Pin is floating so be sure to disable write-protect */ | |
552 | samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; | |
553 | samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; | |
554 | }; | |
555 | ||
88644b4c KK |
556 | pmic_dvs_3: pmic-dvs-3 { |
557 | samsung,pins = "gpx0-0"; | |
17dcc16f KK |
558 | samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
559 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
560 | samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; | |
88644b4c KK |
561 | }; |
562 | ||
563 | pmic_dvs_2: pmic-dvs-2 { | |
564 | samsung,pins = "gpx0-1"; | |
17dcc16f KK |
565 | samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
566 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
567 | samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; | |
88644b4c KK |
568 | }; |
569 | ||
570 | pmic_dvs_1: pmic-dvs-1 { | |
571 | samsung,pins = "gpx0-2"; | |
17dcc16f KK |
572 | samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
573 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
574 | samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; | |
88644b4c KK |
575 | samsung,pin-val = <1>; |
576 | }; | |
577 | ||
578 | max77802_irq: max77802-irq { | |
579 | samsung,pins = "gpx0-4"; | |
17dcc16f KK |
580 | samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
581 | samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; | |
582 | samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; | |
8149afe4 KK |
583 | }; |
584 | }; | |
585 | ||
88644b4c KK |
586 | &pwm { |
587 | /* | |
588 | * PWM 0 -- fan | |
589 | * PWM 1 -- Green LED | |
590 | * PWM 2 -- Blue LED | |
591 | * PWM 3 -- on MIPI connector for backlight | |
592 | */ | |
593 | pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; | |
594 | pinctrl-names = "default"; | |
595 | status = "okay"; | |
596 | }; | |
597 | ||
598 | &rtc { | |
599 | status = "okay"; | |
600 | clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; | |
601 | clock-names = "rtc", "rtc_src"; | |
602 | }; | |
603 | ||
8149afe4 KK |
604 | &serial_0 { |
605 | status = "okay"; | |
606 | }; | |
607 | ||
608 | &serial_1 { | |
609 | status = "okay"; | |
610 | }; | |
611 | ||
612 | &serial_2 { | |
613 | status = "okay"; | |
614 | }; | |
615 | ||
616 | &serial_3 { | |
617 | status = "okay"; | |
618 | }; | |
619 | ||
88644b4c KK |
620 | &tmu_cpu0 { |
621 | vtmu-supply = <&ldo10_reg>; | |
622 | }; | |
623 | ||
624 | &tmu_cpu1 { | |
625 | vtmu-supply = <&ldo10_reg>; | |
626 | }; | |
627 | ||
628 | &tmu_cpu2 { | |
629 | vtmu-supply = <&ldo10_reg>; | |
630 | }; | |
631 | ||
632 | &tmu_cpu3 { | |
633 | vtmu-supply = <&ldo10_reg>; | |
634 | }; | |
635 | ||
8149afe4 KK |
636 | &usbdrd_dwc3_0 { |
637 | dr_mode = "host"; | |
638 | }; | |
639 | ||
640 | &usbdrd_dwc3_1 { | |
641 | dr_mode = "peripheral"; | |
642 | }; | |
88644b4c KK |
643 | |
644 | &usbdrd3_0 { | |
645 | vdd33-supply = <&ldo12_reg>; | |
646 | vdd10-supply = <&ldo15_reg>; | |
647 | }; | |
648 | ||
649 | &usbdrd3_1 { | |
650 | vdd33-supply = <&ldo12_reg>; | |
651 | vdd10-supply = <&ldo15_reg>; | |
652 | }; |