[mirror_ubuntu-artful-kernel.git] / arch / arm / boot / dts / exynos5422-odroidxu3-common.dtsi

/*
 * Hardkernel Odroid XU3 board device tree source
 *
 * Copyright (c) 2014 Collabora Ltd.
 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
#include "exynos5422-cpu-thermal.dtsi"

/ {
	memory {
		reg = <0x40000000 0x7EA00000>;
	};

	chosen {
		linux,stdout-path = &serial_2;
	};

	firmware@02073000 {
		compatible = "samsung,secure-firmware";
		reg = <0x02073000 0x1000>;
	};

	fixed-rate-clocks {
		oscclk {
			compatible = "samsung,exynos5420-oscclk";
			clock-frequency = <24000000>;
		};
	};

	emmc_pwrseq: pwrseq {
		pinctrl-0 = <&emmc_nrst_pin>;
		pinctrl-names = "default";
		compatible = "mmc-pwrseq-emmc";
		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
	};

	fan0: pwm-fan {
		compatible = "pwm-fan";
		pwms = <&pwm 0 20972 0>;
		cooling-min-state = <0>;
		cooling-max-state = <3>;
		#cooling-cells = <2>;
		cooling-levels = <0 130 170 230>;
	};
};

&clock_audss {
	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
			<&clock_audss EXYNOS_MOUT_I2S>,
			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
	assigned-clock-parents = <&clock CLK_FIN_PLL>,
			<&clock_audss EXYNOS_MOUT_AUDSS>;
	assigned-clock-rates = <0>,
			<0>,
			<19200000>;
};

&cpu0 {
	cpu-supply = <&buck6_reg>;
};

&cpu4 {
	cpu-supply = <&buck2_reg>;
};

&hdmi {
	status = "okay";
	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&hdmi_hpd_irq>;

	vdd_osc-supply = <&ldo7_reg>;
	vdd_pll-supply = <&ldo6_reg>;
	vdd-supply = <&ldo6_reg>;
};

&hsi2c_4 {
	status = "okay";

	s2mps11_pmic@66 {
		compatible = "samsung,s2mps11-pmic";
		reg = <0x66>;
		s2mps11,buck2-ramp-delay = <12>;
		s2mps11,buck34-ramp-delay = <12>;
		s2mps11,buck16-ramp-delay = <12>;
		s2mps11,buck6-ramp-enable = <1>;
		s2mps11,buck2-ramp-enable = <1>;
		s2mps11,buck3-ramp-enable = <1>;
		s2mps11,buck4-ramp-enable = <1>;
		samsung,s2mps11-acokb-ground;

		interrupt-parent = <&gpx0>;
		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
		pinctrl-names = "default";
		pinctrl-0 = <&s2mps11_irq>;

		s2mps11_osc: clocks {
			#clock-cells = <1>;
			clock-output-names = "s2mps11_ap",
					"s2mps11_cp", "s2mps11_bt";
		};

		regulators {
			ldo1_reg: LDO1 {
				regulator-name = "vdd_ldo1";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo3_reg: LDO3 {
				regulator-name = "vdd_ldo3";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo5_reg: LDO5 {
				regulator-name = "vdd_ldo5";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo6_reg: LDO6 {
				regulator-name = "vdd_ldo6";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo7_reg: LDO7 {
				regulator-name = "vdd_ldo7";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo8_reg: LDO8 {
				regulator-name = "vdd_ldo8";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo9_reg: LDO9 {
				regulator-name = "vdd_ldo9";
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-always-on;
			};

			ldo10_reg: LDO10 {
				regulator-name = "vdd_ldo10";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo11_reg: LDO11 {
				regulator-name = "vdd_ldo11";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-always-on;
			};

			ldo12_reg: LDO12 {
				regulator-name = "vdd_ldo12";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
			};

			ldo13_reg: LDO13 {
				regulator-name = "vdd_ldo13";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
			};

			ldo15_reg: LDO15 {
				regulator-name = "vdd_ldo15";
				regulator-min-microvolt = <3100000>;
				regulator-max-microvolt = <3100000>;
				regulator-always-on;
			};

			ldo16_reg: LDO16 {
				regulator-name = "vdd_ldo16";
				regulator-min-microvolt = <2200000>;
				regulator-max-microvolt = <2200000>;
				regulator-always-on;
			};

			ldo17_reg: LDO17 {
				regulator-name = "tsp_avdd";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
			};

			ldo19_reg: LDO19 {
				regulator-name = "vdd_sd";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
			};

			ldo24_reg: LDO24 {
				regulator-name = "tsp_io";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				regulator-always-on;
			};

			ldo26_reg: LDO26 {
				regulator-name = "vdd_ldo26";
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-always-on;
			};

			buck1_reg: BUCK1 {
				regulator-name = "vdd_mif";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck2_reg: BUCK2 {
				regulator-name = "vdd_arm";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck3_reg: BUCK3 {
				regulator-name = "vdd_int";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1400000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck4_reg: BUCK4 {
				regulator-name = "vdd_g3d";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1400000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck5_reg: BUCK5 {
				regulator-name = "vdd_mem";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1400000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck6_reg: BUCK6 {
				regulator-name = "vdd_kfc";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck7_reg: BUCK7 {
				regulator-name = "vdd_1.0v_ldo";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck8_reg: BUCK8 {
				regulator-name = "vdd_1.8v_ldo";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck9_reg: BUCK9 {
				regulator-name = "vdd_2.8v_ldo";
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3750000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck10_reg: BUCK10 {
				regulator-name = "vdd_vmem";
				regulator-min-microvolt = <2850000>;
				regulator-max-microvolt = <2850000>;
				regulator-always-on;
				regulator-boot-on;
			};
		};
	};
};

&i2c_2 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-max-bus-freq = <66000>;
	status = "okay";

	hdmiddc@50 {
		compatible = "samsung,exynos4210-hdmiddc";
		reg = <0x50>;
	};
};

&mfc {
	samsung,mfc-r = <0x43000000 0x800000>;
	samsung,mfc-l = <0x51000000 0x800000>;
};

&mmc_0 {
	status = "okay";
	mmc-pwrseq = <&emmc_pwrseq>;
	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
	card-detect-delay = <200>;
	samsung,dw-mshc-ciu-div = <3>;
	samsung,dw-mshc-sdr-timing = <0 4>;
	samsung,dw-mshc-ddr-timing = <0 2>;
	samsung,dw-mshc-hs400-timing = <0 2>;
	samsung,read-strobe-delay = <90>;
	pinctrl-names = "default";
	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
	bus-width = <8>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
};

&mmc_2 {
	status = "okay";
	card-detect-delay = <200>;
	samsung,dw-mshc-ciu-div = <3>;
	samsung,dw-mshc-sdr-timing = <0 4>;
	samsung,dw-mshc-ddr-timing = <0 2>;
	pinctrl-names = "default";
	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
	bus-width = <4>;
	cap-sd-highspeed;
};

&pinctrl_0 {
	hdmi_hpd_irq: hdmi-hpd-irq {
		samsung,pins = "gpx3-7";
		samsung,pin-function = <0>;
		samsung,pin-pud = <1>;
		samsung,pin-drv = <0>;
	};

	s2mps11_irq: s2mps11-irq {
		samsung,pins = "gpx0-4";
		samsung,pin-function = <0xf>;
		samsung,pin-pud = <0>;
		samsung,pin-drv = <0>;
	};
};

&pinctrl_1 {
	emmc_nrst_pin: emmc-nrst {
		samsung,pins = "gpd1-0";
		samsung,pin-function = <0>;
		samsung,pin-pud = <0>;
		samsung,pin-drv = <0>;
	};
};

&tmu_cpu0 {
	vtmu-supply = <&ldo7_reg>;
	status = "okay";
};

&tmu_cpu1 {
	vtmu-supply = <&ldo7_reg>;
	status = "okay";
};

&tmu_cpu2 {
	vtmu-supply = <&ldo7_reg>;
	status = "okay";
};

&tmu_cpu3 {
	vtmu-supply = <&ldo7_reg>;
	status = "okay";
};

&tmu_gpu {
	vtmu-supply = <&ldo7_reg>;
	status = "okay";
};

&rtc {
	status = "okay";
	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
	clock-names = "rtc", "rtc_src";
};

&usbdrd_dwc3_0 {
	dr_mode = "host";
};

/* usbdrd_dwc3_1 mode customized in each board */

&usbdrd3_0 {
	vdd33-supply = <&ldo9_reg>;
	vdd10-supply = <&ldo11_reg>;
};

&usbdrd3_1 {
	vdd33-supply = <&ldo9_reg>;
	vdd10-supply = <&ldo11_reg>;
};
Commit	Line	Data
3a7c01d7 KK	1	/*
	2	* Hardkernel Odroid XU3 board device tree source
	3	*
	4	* Copyright (c) 2014 Collabora Ltd.
	5	* Copyright (c) 2013 Samsung Electronics Co., Ltd.
	6	* http://www.samsung.com
	7	*
	8	* This program is free software; you can redistribute it and/or modify
	9	* it under the terms of the GNU General Public License version 2 as
	10	* published by the Free Software Foundation.
	11	*/
	12
	13	#include <dt-bindings/clock/samsung,s2mps11.h>
	14	#include <dt-bindings/interrupt-controller/irq.h>
	15	#include <dt-bindings/gpio/gpio.h>
	16	#include <dt-bindings/sound/samsung-i2s.h>
	17	#include "exynos5800.dtsi"
df09df6f	18	#include "exynos5422-cpus.dtsi"
cc20fc4c	19	#include "exynos5422-cpu-thermal.dtsi"
3a7c01d7 KK	20
	21	/ {
	22	memory {
	23	reg = <0x40000000 0x7EA00000>;
	24	};
	25
	26	chosen {
	27	linux,stdout-path = &serial_2;
	28	};
	29
	30	firmware@02073000 {
	31	compatible = "samsung,secure-firmware";
	32	reg = <0x02073000 0x1000>;
	33	};
	34
	35	fixed-rate-clocks {
	36	oscclk {
	37	compatible = "samsung,exynos5420-oscclk";
	38	clock-frequency = <24000000>;
	39	};
	40	};
	41
	42	emmc_pwrseq: pwrseq {
	43	pinctrl-0 = <&emmc_nrst_pin>;
	44	pinctrl-names = "default";
	45	compatible = "mmc-pwrseq-emmc";
31b9903c	46	reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
3a7c01d7 KK	47	};
3a7c01d7 KK	48
b685d540 AM	49	fan0: pwm-fan {
	50	compatible = "pwm-fan";
	51	pwms = <&pwm 0 20972 0>;
	52	cooling-min-state = <0>;
	53	cooling-max-state = <3>;
	54	#cooling-cells = <2>;
	55	cooling-levels = <0 130 170 230>;
	56	};
3a7c01d7 KK	57	};
	58
	59	&clock_audss {
	60	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
	61	<&clock_audss EXYNOS_MOUT_I2S>,
	62	<&clock_audss EXYNOS_DOUT_AUD_BUS>;
	63	assigned-clock-parents = <&clock CLK_FIN_PLL>,
	64	<&clock_audss EXYNOS_MOUT_AUDSS>;
	65	assigned-clock-rates = <0>,
	66	<0>,
	67	<19200000>;
	68	};
	69
8b51c5e7 BZ	70	&cpu0 {
	71	cpu-supply = <&buck6_reg>;
	72	};
	73
	74	&cpu4 {
	75	cpu-supply = <&buck2_reg>;
	76	};
	77
3a7c01d7 KK	78	&hdmi {
3a7c01d7 KK	79	status = "okay";
31b9903c	80	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
3a7c01d7 KK	81	pinctrl-names = "default";
	82	pinctrl-0 = <&hdmi_hpd_irq>;
	83
	84	vdd_osc-supply = <&ldo7_reg>;
	85	vdd_pll-supply = <&ldo6_reg>;
	86	vdd-supply = <&ldo6_reg>;
	87	};
	88
	89	&hsi2c_4 {
	90	status = "okay";
	91
	92	s2mps11_pmic@66 {
	93	compatible = "samsung,s2mps11-pmic";
	94	reg = <0x66>;
	95	s2mps11,buck2-ramp-delay = <12>;
	96	s2mps11,buck34-ramp-delay = <12>;
	97	s2mps11,buck16-ramp-delay = <12>;
	98	s2mps11,buck6-ramp-enable = <1>;
	99	s2mps11,buck2-ramp-enable = <1>;
	100	s2mps11,buck3-ramp-enable = <1>;
	101	s2mps11,buck4-ramp-enable = <1>;
0fb033bb	102	samsung,s2mps11-acokb-ground;
3a7c01d7 KK	103
	104	interrupt-parent = <&gpx0>;
	105	interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
	106	pinctrl-names = "default";
	107	pinctrl-0 = <&s2mps11_irq>;
	108
	109	s2mps11_osc: clocks {
	110	#clock-cells = <1>;
	111	clock-output-names = "s2mps11_ap",
	112	"s2mps11_cp", "s2mps11_bt";
	113	};
	114
	115	regulators {
	116	ldo1_reg: LDO1 {
	117	regulator-name = "vdd_ldo1";
	118	regulator-min-microvolt = <1000000>;
	119	regulator-max-microvolt = <1000000>;
	120	regulator-always-on;
	121	};
	122
	123	ldo3_reg: LDO3 {
	124	regulator-name = "vdd_ldo3";
	125	regulator-min-microvolt = <1800000>;
	126	regulator-max-microvolt = <1800000>;
	127	regulator-always-on;
	128	};
	129
	130	ldo5_reg: LDO5 {
	131	regulator-name = "vdd_ldo5";
	132	regulator-min-microvolt = <1800000>;
	133	regulator-max-microvolt = <1800000>;
	134	regulator-always-on;
	135	};
	136
	137	ldo6_reg: LDO6 {
	138	regulator-name = "vdd_ldo6";
	139	regulator-min-microvolt = <1000000>;
	140	regulator-max-microvolt = <1000000>;
	141	regulator-always-on;
	142	};
	143
	144	ldo7_reg: LDO7 {
	145	regulator-name = "vdd_ldo7";
	146	regulator-min-microvolt = <1800000>;
	147	regulator-max-microvolt = <1800000>;
	148	regulator-always-on;
	149	};
	150
	151	ldo8_reg: LDO8 {
	152	regulator-name = "vdd_ldo8";
	153	regulator-min-microvolt = <1800000>;
	154	regulator-max-microvolt = <1800000>;
	155	regulator-always-on;
	156	};
	157
	158	ldo9_reg: LDO9 {
	159	regulator-name = "vdd_ldo9";
	160	regulator-min-microvolt = <3000000>;
	161	regulator-max-microvolt = <3000000>;
	162	regulator-always-on;
	163	};
	164
	165	ldo10_reg: LDO10 {
	166	regulator-name = "vdd_ldo10";
167	regulator-min-microvolt = <1800000>;
168	regulator-max-microvolt = <1800000>;
169	regulator-always-on;
170	};
171
172	ldo11_reg: LDO11 {
173	regulator-name = "vdd_ldo11";
174	regulator-min-microvolt = <1000000>;
175	regulator-max-microvolt = <1000000>;
176	regulator-always-on;
177	};
178
179	ldo12_reg: LDO12 {
180	regulator-name = "vdd_ldo12";
181	regulator-min-microvolt = <1800000>;
182	regulator-max-microvolt = <1800000>;
183	regulator-always-on;
184	};
185
186	ldo13_reg: LDO13 {
187	regulator-name = "vdd_ldo13";
188	regulator-min-microvolt = <2800000>;
189	regulator-max-microvolt = <2800000>;
190	regulator-always-on;
191	};
192
193	ldo15_reg: LDO15 {
194	regulator-name = "vdd_ldo15";
195	regulator-min-microvolt = <3100000>;
196	regulator-max-microvolt = <3100000>;
197	regulator-always-on;
198	};
199
200	ldo16_reg: LDO16 {
201	regulator-name = "vdd_ldo16";
202	regulator-min-microvolt = <2200000>;
203	regulator-max-microvolt = <2200000>;
204	regulator-always-on;
205	};
206
207	ldo17_reg: LDO17 {
208	regulator-name = "tsp_avdd";
209	regulator-min-microvolt = <3300000>;
210	regulator-max-microvolt = <3300000>;
211	regulator-always-on;
212	};
213
214	ldo19_reg: LDO19 {
215	regulator-name = "vdd_sd";
216	regulator-min-microvolt = <2800000>;
217	regulator-max-microvolt = <2800000>;
218	regulator-always-on;
219	};
220
221	ldo24_reg: LDO24 {
222	regulator-name = "tsp_io";
223	regulator-min-microvolt = <2800000>;
224	regulator-max-microvolt = <2800000>;
225	regulator-always-on;
226	};
227
228	ldo26_reg: LDO26 {
229	regulator-name = "vdd_ldo26";
230	regulator-min-microvolt = <3000000>;
231	regulator-max-microvolt = <3000000>;
232	regulator-always-on;
233	};
234
235	buck1_reg: BUCK1 {
236	regulator-name = "vdd_mif";
237	regulator-min-microvolt = <800000>;
238	regulator-max-microvolt = <1300000>;
239	regulator-always-on;
240	regulator-boot-on;
241	};
242
243	buck2_reg: BUCK2 {
244	regulator-name = "vdd_arm";
245	regulator-min-microvolt = <800000>;
246	regulator-max-microvolt = <1500000>;
247	regulator-always-on;
248	regulator-boot-on;
249	};
250
251	buck3_reg: BUCK3 {
252	regulator-name = "vdd_int";
253	regulator-min-microvolt = <800000>;
254	regulator-max-microvolt = <1400000>;
255	regulator-always-on;
256	regulator-boot-on;
257	};
258
259	buck4_reg: BUCK4 {
260	regulator-name = "vdd_g3d";
261	regulator-min-microvolt = <800000>;
262	regulator-max-microvolt = <1400000>;
263	regulator-always-on;
264	regulator-boot-on;
265	};
266
267	buck5_reg: BUCK5 {
268	regulator-name = "vdd_mem";
269	regulator-min-microvolt = <800000>;
270	regulator-max-microvolt = <1400000>;
271	regulator-always-on;
272	regulator-boot-on;
273	};
274
275	buck6_reg: BUCK6 {
276	regulator-name = "vdd_kfc";
277	regulator-min-microvolt = <800000>;
278	regulator-max-microvolt = <1500000>;
279	regulator-always-on;
280	regulator-boot-on;
281	};
282
283	buck7_reg: BUCK7 {
284	regulator-name = "vdd_1.0v_ldo";
285	regulator-min-microvolt = <800000>;
286	regulator-max-microvolt = <1500000>;
287	regulator-always-on;
288	regulator-boot-on;
289	};
290
291	buck8_reg: BUCK8 {
292	regulator-name = "vdd_1.8v_ldo";
293	regulator-min-microvolt = <800000>;
294	regulator-max-microvolt = <1500000>;
295	regulator-always-on;
296	regulator-boot-on;
297	};
298
299	buck9_reg: BUCK9 {
300	regulator-name = "vdd_2.8v_ldo";
301	regulator-min-microvolt = <3000000>;
302	regulator-max-microvolt = <3750000>;
303	regulator-always-on;
304	regulator-boot-on;
305	};
306
307	buck10_reg: BUCK10 {
308	regulator-name = "vdd_vmem";
309	regulator-min-microvolt = <2850000>;
310	regulator-max-microvolt = <2850000>;
311	regulator-always-on;
312	regulator-boot-on;
313	};
314	};
315	};
316	};
317
3a7c01d7 KK	318	&i2c_2 {
	319	samsung,i2c-sda-delay = <100>;
	320	samsung,i2c-max-bus-freq = <66000>;
	321	status = "okay";
	322
	323	hdmiddc@50 {
	324	compatible = "samsung,exynos4210-hdmiddc";
	325	reg = <0x50>;
	326	};
	327	};
	328
3a7c01d7 KK	329	&mfc {
	330	samsung,mfc-r = <0x43000000 0x800000>;
	331	samsung,mfc-l = <0x51000000 0x800000>;
	332	};
	333
	334	&mmc_0 {
	335	status = "okay";
	336	mmc-pwrseq = <&emmc_pwrseq>;
	337	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
	338	card-detect-delay = <200>;
	339	samsung,dw-mshc-ciu-div = <3>;
	340	samsung,dw-mshc-sdr-timing = <0 4>;
	341	samsung,dw-mshc-ddr-timing = <0 2>;
	342	samsung,dw-mshc-hs400-timing = <0 2>;
	343	samsung,read-strobe-delay = <90>;
	344	pinctrl-names = "default";
	345	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
	346	bus-width = <8>;
	347	cap-mmc-highspeed;
	348	mmc-hs200-1_8v;
	349	mmc-hs400-1_8v;
	350	};
	351
	352	&mmc_2 {
	353	status = "okay";
	354	card-detect-delay = <200>;
	355	samsung,dw-mshc-ciu-div = <3>;
	356	samsung,dw-mshc-sdr-timing = <0 4>;
	357	samsung,dw-mshc-ddr-timing = <0 2>;
	358	pinctrl-names = "default";
	359	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
	360	bus-width = <4>;
	361	cap-sd-highspeed;
	362	};
	363
	364	&pinctrl_0 {
	365	hdmi_hpd_irq: hdmi-hpd-irq {
	366	samsung,pins = "gpx3-7";
	367	samsung,pin-function = <0>;
	368	samsung,pin-pud = <1>;
	369	samsung,pin-drv = <0>;
	370	};
	371
	372	s2mps11_irq: s2mps11-irq {
	373	samsung,pins = "gpx0-4";
	374	samsung,pin-function = <0xf>;
	375	samsung,pin-pud = <0>;
	376	samsung,pin-drv = <0>;
	377	};
	378	};
	379
	380	&pinctrl_1 {
	381	emmc_nrst_pin: emmc-nrst {
	382	samsung,pins = "gpd1-0";
	383	samsung,pin-function = <0>;
	384	samsung,pin-pud = <0>;
	385	samsung,pin-drv = <0>;
	386	};
	387	};
	388
8e946a05 AM	389	&tmu_cpu0 {
	390	vtmu-supply = <&ldo7_reg>;
	391	status = "okay";
	392	};
	393
	394	&tmu_cpu1 {
	395	vtmu-supply = <&ldo7_reg>;
	396	status = "okay";
	397	};
	398
	399	&tmu_cpu2 {
	400	vtmu-supply = <&ldo7_reg>;
	401	status = "okay";
	402	};
	403
	404	&tmu_cpu3 {
	405	vtmu-supply = <&ldo7_reg>;
	406	status = "okay";
	407	};
	408
	409	&tmu_gpu {
	410	vtmu-supply = <&ldo7_reg>;
	411	status = "okay";
	412	};
	413
3a7c01d7 KK	414	&rtc {
	415	status = "okay";
	416	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
	417	clock-names = "rtc", "rtc_src";
	418	};
	419
	420	&usbdrd_dwc3_0 {
	421	dr_mode = "host";
	422	};
	423
66583560	424	/* usbdrd_dwc3_1 mode customized in each board */
dc929d49 AM	425
	426	&usbdrd3_0 {
	427	vdd33-supply = <&ldo9_reg>;
	428	vdd10-supply = <&ldo11_reg>;
	429	};
	430
	431	&usbdrd3_1 {
	432	vdd33-supply = <&ldo9_reg>;
	433	vdd10-supply = <&ldo11_reg>;
	434	};