[mirror_ubuntu-focal-kernel.git] / arch / arm / boot / dts / imx25.dtsi

/*
 * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

#include "skeleton.dtsi"

/ {
	aliases {
		gpio0 = &gpio1;
		gpio1 = &gpio2;
		gpio2 = &gpio3;
		gpio3 = &gpio4;
		i2c0 = &i2c1;
		i2c1 = &i2c2;
		i2c2 = &i2c3;
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		serial3 = &uart4;
		serial4 = &uart5;
		spi0 = &spi1;
		spi1 = &spi2;
		spi2 = &spi3;
		usb0 = &usbotg;
		usb1 = &usbhost1;
	};

	cpus {
		#address-cells = <0>;
		#size-cells = <0>;

		cpu {
			compatible = "arm,arm926ej-s";
			device_type = "cpu";
		};
	};

	asic: asic-interrupt-controller@68000000 {
		compatible = "fsl,imx25-asic", "fsl,avic";
		interrupt-controller;
		#interrupt-cells = <1>;
		reg = <0x68000000 0x8000000>;
	};

	clocks {
		#address-cells = <1>;
		#size-cells = <0>;

		osc {
			compatible = "fsl,imx-osc", "fixed-clock";
			clock-frequency = <24000000>;
		};
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		interrupt-parent = <&asic>;
		ranges;

		aips@43f00000 { /* AIPS1 */
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x43f00000 0x100000>;
			ranges;

			i2c1: i2c@43f80000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
				reg = <0x43f80000 0x4000>;
				clocks = <&clks 48>;
				clock-names = "";
				interrupts = <3>;
				status = "disabled";
			};

			i2c3: i2c@43f84000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
				reg = <0x43f84000 0x4000>;
				clocks = <&clks 48>;
				clock-names = "";
				interrupts = <10>;
				status = "disabled";
			};

			can1: can@43f88000 {
				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
				reg = <0x43f88000 0x4000>;
				interrupts = <43>;
				clocks = <&clks 75>, <&clks 75>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			can2: can@43f8c000 {
				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
				reg = <0x43f8c000 0x4000>;
				interrupts = <44>;
				clocks = <&clks 76>, <&clks 76>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart1: serial@43f90000 {
				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
				reg = <0x43f90000 0x4000>;
				interrupts = <45>;
				clocks = <&clks 120>, <&clks 57>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart2: serial@43f94000 {
				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
				reg = <0x43f94000 0x4000>;
				interrupts = <32>;
				clocks = <&clks 121>, <&clks 57>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			i2c2: i2c@43f98000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
				reg = <0x43f98000 0x4000>;
				clocks = <&clks 48>;
				clock-names = "";
				interrupts = <4>;
				status = "disabled";
			};

			owire@43f9c000 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x43f9c000 0x4000>;
				clocks = <&clks 51>;
				clock-names = "";
				interrupts = <2>;
				status = "disabled";
			};

			spi1: cspi@43fa4000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
				reg = <0x43fa4000 0x4000>;
				clocks = <&clks 62>, <&clks 62>;
				clock-names = "ipg", "per";
				interrupts = <14>;
				status = "disabled";
			};

			kpp@43fa8000 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x43fa8000 0x4000>;
				clocks = <&clks 102>;
				clock-names = "";
				interrupts = <24>;
				status = "disabled";
			};

			iomuxc@43fac000{
				compatible = "fsl,imx25-iomuxc";
				reg = <0x43fac000 0x4000>;
			};

			audmux@43fb0000 {
				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
				reg = <0x43fb0000 0x4000>;
				status = "disabled";
			};
		};

		spba@50000000 {
			compatible = "fsl,spba-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x50000000 0x40000>;
			ranges;

			spi3: cspi@50004000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
				reg = <0x50004000 0x4000>;
				interrupts = <0>;
				clocks = <&clks 80>, <&clks 80>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart4: serial@50008000 {
				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
				reg = <0x50008000 0x4000>;
				interrupts = <5>;
				clocks = <&clks 123>, <&clks 57>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			uart3: serial@5000c000 {
				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
				reg = <0x5000c000 0x4000>;
				interrupts = <18>;
				clocks = <&clks 122>, <&clks 57>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			spi2: cspi@50010000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
				reg = <0x50010000 0x4000>;
				clocks = <&clks 79>, <&clks 79>;
				clock-names = "ipg", "per";
				interrupts = <13>;
				status = "disabled";
			};

			ssi2: ssi@50014000 {
				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
				reg = <0x50014000 0x4000>;
				interrupts = <11>;
				status = "disabled";
			};

			esai@50018000 {
				reg = <0x50018000 0x4000>;
				interrupts = <7>;
			};

			uart5: serial@5002c000 {
				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
				reg = <0x5002c000 0x4000>;
				interrupts = <40>;
				clocks = <&clks 124>, <&clks 57>;
				clock-names = "ipg", "per";
				status = "disabled";
			};

			tsc: tsc@50030000 {
				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
				reg = <0x50030000 0x4000>;
				interrupts = <46>;
				clocks = <&clks 119>;
				clock-names = "ipg";
				status = "disabled";
			};

			ssi1: ssi@50034000 {
				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
				reg = <0x50034000 0x4000>;
				interrupts = <12>;
				status = "disabled";
			};

			fec: ethernet@50038000 {
				compatible = "fsl,imx25-fec";
				reg = <0x50038000 0x4000>;
				interrupts = <57>;
				clocks = <&clks 88>, <&clks 65>;
				clock-names = "ipg", "ahb";
				status = "disabled";
			};
		};

		aips@53f00000 { /* AIPS2 */
			compatible = "fsl,aips-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x53f00000 0x100000>;
			ranges;

			clks: ccm@53f80000 {
				compatible = "fsl,imx25-ccm";
				reg = <0x53f80000 0x4000>;
				interrupts = <31>;
				#clock-cells = <1>;
			};

			gpt4: timer@53f84000 {
				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
				reg = <0x53f84000 0x4000>;
				clocks = <&clks 9>, <&clks 45>;
				clock-names = "ipg", "per";
				interrupts = <1>;
			};

			gpt3: timer@53f88000 {
				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
				reg = <0x53f88000 0x4000>;
				clocks = <&clks 9>, <&clks 47>;
				clock-names = "ipg", "per";
				interrupts = <29>;
			};

			gpt2: timer@53f8c000 {
				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
				reg = <0x53f8c000 0x4000>;
				clocks = <&clks 9>, <&clks 47>;
				clock-names = "ipg", "per";
				interrupts = <53>;
			};

			gpt1: timer@53f90000 {
				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
				reg = <0x53f90000 0x4000>;
				clocks = <&clks 9>, <&clks 47>;
				clock-names = "ipg", "per";
				interrupts = <54>;
			};

			epit1: timer@53f94000 {
				compatible = "fsl,imx25-epit";
				reg = <0x53f94000 0x4000>;
				interrupts = <28>;
			};

			epit2: timer@53f98000 {
				compatible = "fsl,imx25-epit";
				reg = <0x53f98000 0x4000>;
				interrupts = <27>;
			};

			gpio4: gpio@53f9c000 {
				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
				reg = <0x53f9c000 0x4000>;
				interrupts = <23>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			pwm2: pwm@53fa0000 {
				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
				#pwm-cells = <2>;
				reg = <0x53fa0000 0x4000>;
				clocks = <&clks 106>, <&clks 36>;
				clock-names = "ipg", "per";
				interrupts = <36>;
			};

			gpio3: gpio@53fa4000 {
				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
				reg = <0x53fa4000 0x4000>;
				interrupts = <16>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			pwm3: pwm@53fa8000 {
				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
				#pwm-cells = <2>;
				reg = <0x53fa8000 0x4000>;
				clocks = <&clks 107>, <&clks 36>;
				clock-names = "ipg", "per";
				interrupts = <41>;
			};

			esdhc1: esdhc@53fb4000 {
				compatible = "fsl,imx25-esdhc";
				reg = <0x53fb4000 0x4000>;
				interrupts = <9>;
				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
				clock-names = "ipg", "ahb", "per";
				status = "disabled";
			};

			esdhc2: esdhc@53fb8000 {
				compatible = "fsl,imx25-esdhc";
				reg = <0x53fb8000 0x4000>;
				interrupts = <8>;
				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
				clock-names = "ipg", "ahb", "per";
				status = "disabled";
			};

			lcdc@53fbc000 {
				reg = <0x53fbc000 0x4000>;
				interrupts = <39>;
				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
				clock-names = "ipg", "ahb", "per";
				status = "disabled";
			};

			slcdc@53fc0000 {
				reg = <0x53fc0000 0x4000>;
				interrupts = <38>;
				status = "disabled";
			};

			pwm4: pwm@53fc8000 {
				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
				reg = <0x53fc8000 0x4000>;
				clocks = <&clks 108>, <&clks 36>;
				clock-names = "ipg", "per";
				interrupts = <42>;
			};

			gpio1: gpio@53fcc000 {
				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
				reg = <0x53fcc000 0x4000>;
				interrupts = <52>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			gpio2: gpio@53fd0000 {
				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
				reg = <0x53fd0000 0x4000>;
				interrupts = <51>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
			};

			sdma@53fd4000 {
				compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
				reg = <0x53fd4000 0x4000>;
				clocks = <&clks 112>, <&clks 68>;
				clock-names = "ipg", "ahb";
				#dma-cells = <3>;
				interrupts = <34>;
			};

			wdog@53fdc000 {
				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
				reg = <0x53fdc000 0x4000>;
				clocks = <&clks 126>;
				clock-names = "";
				interrupts = <55>;
			};

			pwm1: pwm@53fe0000 {
				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
				#pwm-cells = <2>;
				reg = <0x53fe0000 0x4000>;
				clocks = <&clks 105>, <&clks 36>;
				clock-names = "ipg", "per";
				interrupts = <26>;
			};

			iim: iim@53ff0000 {
				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
				reg = <0x53ff0000 0x4000>;
				interrupts = <19>;
				clocks = <&clks 99>;
			};

			usbphy1: usbphy@1 {
				compatible = "nop-usbphy";
				status = "disabled";
			};

			usbphy2: usbphy@2 {
				compatible = "nop-usbphy";
				status = "disabled";
			};

			usbotg: usb@53ff4000 {
				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
				reg = <0x53ff4000 0x0200>;
				interrupts = <37>;
				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
				clock-names = "ipg", "ahb", "per";
				fsl,usbmisc = <&usbmisc 0>;
				status = "disabled";
			};

			usbhost1: usb@53ff4400 {
				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
				reg = <0x53ff4400 0x0200>;
				interrupts = <35>;
				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
				clock-names = "ipg", "ahb", "per";
				fsl,usbmisc = <&usbmisc 1>;
				status = "disabled";
			};

			usbmisc: usbmisc@53ff4600 {
				#index-cells = <1>;
				compatible = "fsl,imx25-usbmisc";
				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
				clock-names = "ipg", "ahb", "per";
				reg = <0x53ff4600 0x00f>;
				status = "disabled";
			};

			dryice@53ffc000 {
				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
				reg = <0x53ffc000 0x4000>;
				clocks = <&clks 81>;
				clock-names = "ipg";
				interrupts = <25>;
			};
		};

		emi@80000000 {
			compatible = "fsl,emi-bus", "simple-bus";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x80000000 0x3b002000>;
			ranges;

			nfc: nand@bb000000 {
				#address-cells = <1>;
				#size-cells = <1>;

				compatible = "fsl,imx25-nand";
				reg = <0xbb000000 0x2000>;
				clocks = <&clks 50>;
				clock-names = "";
				interrupts = <33>;
				status = "disabled";
			};
		};
	};
};
Commit	Line	Data
5658a68f SH	1	/*
	2	* Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
	3	*
	4	* The code contained herein is licensed under the GNU General Public
	5	* License. You may obtain a copy of the GNU General Public License
	6	* Version 2 or later at the following locations:
	7	*
	8	* http://www.opensource.org/licenses/gpl-license.html
	9	* http://www.gnu.org/copyleft/gpl.html
	10	*/
	11
36dffd8f	12	#include "skeleton.dtsi"
5658a68f SH	13
	14	/ {
	15	aliases {
6ed1a0e5 SH	16	gpio0 = &gpio1;
	17	gpio1 = &gpio2;
	18	gpio2 = &gpio3;
	19	gpio3 = &gpio4;
	20	i2c0 = &i2c1;
	21	i2c1 = &i2c2;
	22	i2c2 = &i2c3;
5658a68f SH	23	serial0 = &uart1;
	24	serial1 = &uart2;
	25	serial2 = &uart3;
	26	serial3 = &uart4;
	27	serial4 = &uart5;
6ed1a0e5 SH	28	spi0 = &spi1;
	29	spi1 = &spi2;
	30	spi2 = &spi3;
5658a68f SH	31	usb0 = &usbotg;
	32	usb1 = &usbhost1;
	33	};
	34
070bd7e4 FE	35	cpus {
	36	#address-cells = <0>;
	37	#size-cells = <0>;
	38
	39	cpu {
	40	compatible = "arm,arm926ej-s";
	41	device_type = "cpu";
	42	};
	43	};
	44
5658a68f SH	45	asic: asic-interrupt-controller@68000000 {
	46	compatible = "fsl,imx25-asic", "fsl,avic";
	47	interrupt-controller;
	48	#interrupt-cells = <1>;
	49	reg = <0x68000000 0x8000000>;
	50	};
	51
	52	clocks {
	53	#address-cells = <1>;
	54	#size-cells = <0>;
	55
	56	osc {
	57	compatible = "fsl,imx-osc", "fixed-clock";
	58	clock-frequency = <24000000>;
	59	};
	60	};
	61
	62	soc {
	63	#address-cells = <1>;
	64	#size-cells = <1>;
	65	compatible = "simple-bus";
	66	interrupt-parent = <&asic>;
	67	ranges;
	68
	69	aips@43f00000 { /* AIPS1 */
	70	compatible = "fsl,aips-bus", "simple-bus";
	71	#address-cells = <1>;
	72	#size-cells = <1>;
	73	reg = <0x43f00000 0x100000>;
	74	ranges;
	75
	76	i2c1: i2c@43f80000 {
	77	#address-cells = <1>;
	78	#size-cells = <0>;
	79	compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
	80	reg = <0x43f80000 0x4000>;
	81	clocks = <&clks 48>;
	82	clock-names = "";
	83	interrupts = <3>;
	84	status = "disabled";
	85	};
	86
	87	i2c3: i2c@43f84000 {
	88	#address-cells = <1>;
	89	#size-cells = <0>;
	90	compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
	91	reg = <0x43f84000 0x4000>;
	92	clocks = <&clks 48>;
	93	clock-names = "";
	94	interrupts = <10>;
	95	status = "disabled";
	96	};
	97
	98	can1: can@43f88000 {
	99	compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
	100	reg = <0x43f88000 0x4000>;
	101	interrupts = <43>;
	102	clocks = <&clks 75>, <&clks 75>;
	103	clock-names = "ipg", "per";
	104	status = "disabled";
	105	};
	106
	107	can2: can@43f8c000 {
	108	compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
109	reg = <0x43f8c000 0x4000>;
110	interrupts = <44>;
111	clocks = <&clks 76>, <&clks 76>;
112	clock-names = "ipg", "per";
113	status = "disabled";
114	};
115
116	uart1: serial@43f90000 {
117	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
118	reg = <0x43f90000 0x4000>;
119	interrupts = <45>;
120	clocks = <&clks 120>, <&clks 57>;
121	clock-names = "ipg", "per";
122	status = "disabled";
123	};
124
125	uart2: serial@43f94000 {
126	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
127	reg = <0x43f94000 0x4000>;
128	interrupts = <32>;
129	clocks = <&clks 121>, <&clks 57>;
130	clock-names = "ipg", "per";
131	status = "disabled";
132	};
133
134	i2c2: i2c@43f98000 {
135	#address-cells = <1>;
136	#size-cells = <0>;
137	compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
138	reg = <0x43f98000 0x4000>;
139	clocks = <&clks 48>;
140	clock-names = "";
141	interrupts = <4>;
142	status = "disabled";
143	};
144
145	owire@43f9c000 {
146	#address-cells = <1>;
147	#size-cells = <0>;
148	reg = <0x43f9c000 0x4000>;
149	clocks = <&clks 51>;
150	clock-names = "";
151	interrupts = <2>;
152	status = "disabled";
153	};
154
155	spi1: cspi@43fa4000 {
156	#address-cells = <1>;
157	#size-cells = <0>;
158	compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
159	reg = <0x43fa4000 0x4000>;
37523dc5 JA	160	clocks = <&clks 62>, <&clks 62>;
37523dc5 JA	161	clock-names = "ipg", "per";
5658a68f SH	162	interrupts = <14>;
	163	status = "disabled";
	164	};
	165
	166	kpp@43fa8000 {
	167	#address-cells = <1>;
	168	#size-cells = <0>;
	169	reg = <0x43fa8000 0x4000>;
	170	clocks = <&clks 102>;
	171	clock-names = "";
	172	interrupts = <24>;
	173	status = "disabled";
	174	};
	175
	176	iomuxc@43fac000{
	177	compatible = "fsl,imx25-iomuxc";
	178	reg = <0x43fac000 0x4000>;
	179	};
	180
	181	audmux@43fb0000 {
	182	compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
	183	reg = <0x43fb0000 0x4000>;
	184	status = "disabled";
	185	};
	186	};
	187
	188	spba@50000000 {
	189	compatible = "fsl,spba-bus", "simple-bus";
	190	#address-cells = <1>;
	191	#size-cells = <1>;
	192	reg = <0x50000000 0x40000>;
	193	ranges;
	194
	195	spi3: cspi@50004000 {
	196	#address-cells = <1>;
	197	#size-cells = <0>;
	198	compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
	199	reg = <0x50004000 0x4000>;
	200	interrupts = <0>;
37523dc5 JA	201	clocks = <&clks 80>, <&clks 80>;
37523dc5 JA	202	clock-names = "ipg", "per";
5658a68f SH	203	status = "disabled";
	204	};
	205
	206	uart4: serial@50008000 {
	207	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
	208	reg = <0x50008000 0x4000>;
	209	interrupts = <5>;
	210	clocks = <&clks 123>, <&clks 57>;
	211	clock-names = "ipg", "per";
	212	status = "disabled";
	213	};
	214
	215	uart3: serial@5000c000 {
	216	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
	217	reg = <0x5000c000 0x4000>;
	218	interrupts = <18>;
	219	clocks = <&clks 122>, <&clks 57>;
	220	clock-names = "ipg", "per";
	221	status = "disabled";
	222	};
	223
	224	spi2: cspi@50010000 {
	225	#address-cells = <1>;
	226	#size-cells = <0>;
	227	compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
	228	reg = <0x50010000 0x4000>;
37523dc5 JA	229	clocks = <&clks 79>, <&clks 79>;
37523dc5 JA	230	clock-names = "ipg", "per";
5658a68f SH	231	interrupts = <13>;
	232	status = "disabled";
	233	};
	234
	235	ssi2: ssi@50014000 {
	236	compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
	237	reg = <0x50014000 0x4000>;
	238	interrupts = <11>;
	239	status = "disabled";
	240	};
	241
	242	esai@50018000 {
	243	reg = <0x50018000 0x4000>;
	244	interrupts = <7>;
	245	};
	246
	247	uart5: serial@5002c000 {
	248	compatible = "fsl,imx25-uart", "fsl,imx21-uart";
	249	reg = <0x5002c000 0x4000>;
	250	interrupts = <40>;
	251	clocks = <&clks 124>, <&clks 57>;
	252	clock-names = "ipg", "per";
	253	status = "disabled";
	254	};
	255
	256	tsc: tsc@50030000 {
	257	compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
	258	reg = <0x50030000 0x4000>;
	259	interrupts = <46>;
	260	clocks = <&clks 119>;
	261	clock-names = "ipg";
	262	status = "disabled";
	263	};
	264
	265	ssi1: ssi@50034000 {
	266	compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
	267	reg = <0x50034000 0x4000>;
	268	interrupts = <12>;
	269	status = "disabled";
	270	};
	271
	272	fec: ethernet@50038000 {
	273	compatible = "fsl,imx25-fec";
	274	reg = <0x50038000 0x4000>;
	275	interrupts = <57>;
	276	clocks = <&clks 88>, <&clks 65>;
	277	clock-names = "ipg", "ahb";
	278	status = "disabled";
	279	};
	280	};
	281
	282	aips@53f00000 { /* AIPS2 */
	283	compatible = "fsl,aips-bus", "simple-bus";
	284	#address-cells = <1>;
	285	#size-cells = <1>;
	286	reg = <0x53f00000 0x100000>;
	287	ranges;
	288
	289	clks: ccm@53f80000 {
	290	compatible = "fsl,imx25-ccm";
	291	reg = <0x53f80000 0x4000>;
	292	interrupts = <31>;
	293	#clock-cells = <1>;
	294	};
295
296	gpt4: timer@53f84000 {
297	compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
298	reg = <0x53f84000 0x4000>;
299	clocks = <&clks 9>, <&clks 45>;
300	clock-names = "ipg", "per";
301	interrupts = <1>;
302	};
303
304	gpt3: timer@53f88000 {
305	compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
306	reg = <0x53f88000 0x4000>;
307	clocks = <&clks 9>, <&clks 47>;
308	clock-names = "ipg", "per";
309	interrupts = <29>;
310	};
311
312	gpt2: timer@53f8c000 {
313	compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
314	reg = <0x53f8c000 0x4000>;
315	clocks = <&clks 9>, <&clks 47>;
316	clock-names = "ipg", "per";
317	interrupts = <53>;
318	};
319
320	gpt1: timer@53f90000 {
321	compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
322	reg = <0x53f90000 0x4000>;
323	clocks = <&clks 9>, <&clks 47>;
324	clock-names = "ipg", "per";
325	interrupts = <54>;
326	};
327
328	epit1: timer@53f94000 {
329	compatible = "fsl,imx25-epit";
330	reg = <0x53f94000 0x4000>;
331	interrupts = <28>;
332	};
333
334	epit2: timer@53f98000 {
335	compatible = "fsl,imx25-epit";
336	reg = <0x53f98000 0x4000>;
337	interrupts = <27>;
338	};
339
340	gpio4: gpio@53f9c000 {
341	compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
342	reg = <0x53f9c000 0x4000>;
343	interrupts = <23>;
344	gpio-controller;
345	#gpio-cells = <2>;
346	interrupt-controller;
347	#interrupt-cells = <2>;
348	};
349
350	pwm2: pwm@53fa0000 {
351	compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
352	#pwm-cells = <2>;
353	reg = <0x53fa0000 0x4000>;
354	clocks = <&clks 106>, <&clks 36>;
355	clock-names = "ipg", "per";
356	interrupts = <36>;
357	};
358
359	gpio3: gpio@53fa4000 {
360	compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
361	reg = <0x53fa4000 0x4000>;
362	interrupts = <16>;
363	gpio-controller;
364	#gpio-cells = <2>;
365	interrupt-controller;
366	#interrupt-cells = <2>;
367	};
368
369	pwm3: pwm@53fa8000 {
370	compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
371	#pwm-cells = <2>;
372	reg = <0x53fa8000 0x4000>;
373	clocks = <&clks 107>, <&clks 36>;
374	clock-names = "ipg", "per";
375	interrupts = <41>;
376	};
377
378	esdhc1: esdhc@53fb4000 {
379	compatible = "fsl,imx25-esdhc";
380	reg = <0x53fb4000 0x4000>;
381	interrupts = <9>;
382	clocks = <&clks 86>, <&clks 63>, <&clks 45>;
383	clock-names = "ipg", "ahb", "per";
384	status = "disabled";
385	};
386
387	esdhc2: esdhc@53fb8000 {
388	compatible = "fsl,imx25-esdhc";
389	reg = <0x53fb8000 0x4000>;
390	interrupts = <8>;
391	clocks = <&clks 87>, <&clks 64>, <&clks 46>;
392	clock-names = "ipg", "ahb", "per";
393	status = "disabled";
394	};
395
396	lcdc@53fbc000 {
397	reg = <0x53fbc000 0x4000>;
398	interrupts = <39>;
399	clocks = <&clks 103>, <&clks 66>, <&clks 49>;
400	clock-names = "ipg", "ahb", "per";
401	status = "disabled";
402	};
403
404	slcdc@53fc0000 {
405	reg = <0x53fc0000 0x4000>;
406	interrupts = <38>;
407	status = "disabled";
408	};
409
410	pwm4: pwm@53fc8000 {
411	compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
412	reg = <0x53fc8000 0x4000>;
413	clocks = <&clks 108>, <&clks 36>;
414	clock-names = "ipg", "per";
415	interrupts = <42>;
416	};
417
418	gpio1: gpio@53fcc000 {
419	compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
420	reg = <0x53fcc000 0x4000>;
421	interrupts = <52>;
422	gpio-controller;
423	#gpio-cells = <2>;
424	interrupt-controller;
425	#interrupt-cells = <2>;
426	};
427
428	gpio2: gpio@53fd0000 {
429	compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
430	reg = <0x53fd0000 0x4000>;
431	interrupts = <51>;
432	gpio-controller;
433	#gpio-cells = <2>;
434	interrupt-controller;
435	#interrupt-cells = <2>;
436	};
437
438	sdma@53fd4000 {
439	compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
440	reg = <0x53fd4000 0x4000>;
441	clocks = <&clks 112>, <&clks 68>;
442	clock-names = "ipg", "ahb";
fb72bb21	443	#dma-cells = <3>;
5658a68f SH	444	interrupts = <34>;
	445	};
	446
	447	wdog@53fdc000 {
	448	compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
	449	reg = <0x53fdc000 0x4000>;
	450	clocks = <&clks 126>;
	451	clock-names = "";
	452	interrupts = <55>;
	453	};
	454
	455	pwm1: pwm@53fe0000 {
	456	compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
	457	#pwm-cells = <2>;
	458	reg = <0x53fe0000 0x4000>;
	459	clocks = <&clks 105>, <&clks 36>;
	460	clock-names = "ipg", "per";
	461	interrupts = <26>;
	462	};
	463
684f6a23 SH	464	iim: iim@53ff0000 {
	465	compatible = "fsl,imx25-iim", "fsl,imx27-iim";
	466	reg = <0x53ff0000 0x4000>;
	467	interrupts = <19>;
	468	clocks = <&clks 99>;
	469	};
	470
5658a68f SH	471	usbphy1: usbphy@1 {
	472	compatible = "nop-usbphy";
	473	status = "disabled";
	474	};
	475
	476	usbphy2: usbphy@2 {
	477	compatible = "nop-usbphy";
	478	status = "disabled";
	479	};
	480
	481	usbotg: usb@53ff4000 {
	482	compatible = "fsl,imx25-usb", "fsl,imx27-usb";
	483	reg = <0x53ff4000 0x0200>;
	484	interrupts = <37>;
	485	clocks = <&clks 9>, <&clks 70>, <&clks 8>;
	486	clock-names = "ipg", "ahb", "per";
	487	fsl,usbmisc = <&usbmisc 0>;
	488	status = "disabled";
	489	};
	490
	491	usbhost1: usb@53ff4400 {
	492	compatible = "fsl,imx25-usb", "fsl,imx27-usb";
	493	reg = <0x53ff4400 0x0200>;
	494	interrupts = <35>;
	495	clocks = <&clks 9>, <&clks 70>, <&clks 8>;
	496	clock-names = "ipg", "ahb", "per";
	497	fsl,usbmisc = <&usbmisc 1>;
	498	status = "disabled";
	499	};
	500
	501	usbmisc: usbmisc@53ff4600 {
	502	#index-cells = <1>;
	503	compatible = "fsl,imx25-usbmisc";
	504	clocks = <&clks 9>, <&clks 70>, <&clks 8>;
	505	clock-names = "ipg", "ahb", "per";
	506	reg = <0x53ff4600 0x00f>;
	507	status = "disabled";
	508	};
	509
	510	dryice@53ffc000 {
	511	compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
	512	reg = <0x53ffc000 0x4000>;
	513	clocks = <&clks 81>;
	514	clock-names = "ipg";
	515	interrupts = <25>;
	516	};
	517	};
	518
	519	emi@80000000 {
	520	compatible = "fsl,emi-bus", "simple-bus";
	521	#address-cells = <1>;
	522	#size-cells = <1>;
	523	reg = <0x80000000 0x3b002000>;
	524	ranges;
	525
be4ccfce	526	nfc: nand@bb000000 {
5658a68f SH	527	#address-cells = <1>;
	528	#size-cells = <1>;
	529
	530	compatible = "fsl,imx25-nand";
	531	reg = <0xbb000000 0x2000>;
	532	clocks = <&clks 50>;
	533	clock-names = "";
	534	interrupts = <33>;
	535	status = "disabled";
	536	};
	537	};
	538	};
	539	};