[mirror_ubuntu-zesty-kernel.git] / arch / arm / boot / dts / imx28-cfa10036.dts

/*
 * Copyright 2012 Free Electrons
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
#include "imx28.dtsi"

/ {
	model = "Crystalfontz CFA-10036 Board";
	compatible = "crystalfontz,cfa10036", "fsl,imx28";

	memory {
		reg = <0x40000000 0x08000000>;
	};

	apb@80000000 {
		apbh@80000000 {
			pinctrl@80018000 {
				ssd1306_cfa10036: ssd1306-10036@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_SSP0_DATA7__GPIO_2_7
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				led_pins_cfa10036: leds-10036@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_AUART1_RX__GPIO_3_4
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				usb0_otg_cfa10036: otg-10036@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						MX28_PAD_GPMI_RDY0__USB0_ID
					>;
					fsl,drive-strength = <MXS_DRIVE_4mA>;
					fsl,voltage = <MXS_VOLTAGE_HIGH>;
					fsl,pull-up = <MXS_PULL_DISABLE>;
				};

				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
					reg = <0>;
					fsl,pinmux-ids = <
						0x31c3 /*
						MX28_PAD_PWM3__GPIO_3_28 */
					>;
					fsl,drive-strength = <0>;
					fsl,voltage = <1>;
					fsl,pull-up = <0>;
				};

			};

			ssp0: ssp@80010000 {
				compatible = "fsl,imx28-mmc";
				pinctrl-names = "default";
				pinctrl-0 = <&mmc0_4bit_pins_a
					&mmc0_cd_cfg &mmc0_sck_cfg>;
				vmmc-supply = <&reg_vddio_sd0>;
				bus-width = <4>;
				status = "okay";
			};
		};

		apbx@80040000 {
			duart: serial@80074000 {
				pinctrl-names = "default";
				pinctrl-0 = <&duart_pins_b>;
				status = "okay";
			};

			i2c0: i2c@80058000 {
				pinctrl-names = "default";
				pinctrl-0 = <&i2c0_pins_b>;
				clock-frequency = <400000>;
				status = "okay";

				ssd1306: oled@3c {
					compatible = "solomon,ssd1306fb-i2c";
					pinctrl-names = "default";
					pinctrl-0 = <&ssd1306_cfa10036>;
					reg = <0x3c>;
					reset-gpios = <&gpio2 7 0>;
					solomon,height = <32>;
					solomon,width = <128>;
					solomon,page-offset = <0>;
					solomon,com-lrremap;
					solomon,com-invdir;
					solomon,com-offset = <32>;
				};
			};

			usbphy0: usbphy@8007c000 {
				status = "okay";
			};
		};
	};

	ahb@80080000 {
		usb0: usb@80080000 {
			pinctrl-names = "default";
			pinctrl-0 = <&usb0_otg_cfa10036>;
			dr_mode = "peripheral";
			phy_type = "utmi";
			status = "okay";
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&led_pins_cfa10036>;

		power {
			gpios = <&gpio3 4 1>;
			default-state = "on";
		};
	};

	reg_vddio_sd0: vddio-sd0 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&mmc_pwr_cfa10036>;
		regulator-name = "vddio-sd0";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio3 28 0>;
	};
};
Commit	Line	Data
330eaaf9 MR	1	/*
	2	* Copyright 2012 Free Electrons
	3	*
	4	* The code contained herein is licensed under the GNU General Public
	5	* License. You may obtain a copy of the GNU General Public License
	6	* Version 2 or later at the following locations:
	7	*
	8	* http://www.opensource.org/licenses/gpl-license.html
	9	* http://www.gnu.org/copyleft/gpl.html
	10	*/
	11
	12	/dts-v1/;
bc3875f1	13	#include "imx28.dtsi"
330eaaf9 MR	14
	15	/ {
	16	model = "Crystalfontz CFA-10036 Board";
	17	compatible = "crystalfontz,cfa10036", "fsl,imx28";
	18
	19	memory {
	20	reg = <0x40000000 0x08000000>;
	21	};
	22
	23	apb@80000000 {
	24	apbh@80000000 {
c241d0a3	25	pinctrl@80018000 {
a74d2ec7	26	ssd1306_cfa10036: ssd1306-10036@0 {
24196d5c MR	27	reg = <0>;
24196d5c MR	28	fsl,pinmux-ids = <
bc3875f1	29	MX28_PAD_SSP0_DATA7__GPIO_2_7
24196d5c	30	>;
4191c340 LW	31	fsl,drive-strength = <MXS_DRIVE_4mA>;
	32	fsl,voltage = <MXS_VOLTAGE_HIGH>;
	33	fsl,pull-up = <MXS_PULL_DISABLE>;
24196d5c MR	34	};
24196d5c MR	35
c241d0a3 MR	36	led_pins_cfa10036: leds-10036@0 {
	37	reg = <0>;
	38	fsl,pinmux-ids = <
bc3875f1	39	MX28_PAD_AUART1_RX__GPIO_3_4
c241d0a3	40	>;
4191c340 LW	41	fsl,drive-strength = <MXS_DRIVE_4mA>;
	42	fsl,voltage = <MXS_VOLTAGE_HIGH>;
	43	fsl,pull-up = <MXS_PULL_DISABLE>;
c241d0a3	44	};
17a21638 MR	45
	46	usb0_otg_cfa10036: otg-10036@0 {
	47	reg = <0>;
	48	fsl,pinmux-ids = <
bc3875f1	49	MX28_PAD_GPMI_RDY0__USB0_ID
17a21638	50	>;
4191c340 LW	51	fsl,drive-strength = <MXS_DRIVE_4mA>;
	52	fsl,voltage = <MXS_VOLTAGE_HIGH>;
	53	fsl,pull-up = <MXS_PULL_DISABLE>;
17a21638 MR	54	};
17a21638 MR	55
a3f8c564 AB	56	mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
	57	reg = <0>;
	58	fsl,pinmux-ids = <
	59	0x31c3 /*
	60	MX28_PAD_PWM3__GPIO_3_28 */
	61	>;
	62	fsl,drive-strength = <0>;
	63	fsl,voltage = <1>;
	64	fsl,pull-up = <0>;
	65	};
	66
c241d0a3 MR	67	};
c241d0a3 MR	68
330eaaf9 MR	69	ssp0: ssp@80010000 {
	70	compatible = "fsl,imx28-mmc";
	71	pinctrl-names = "default";
	72	pinctrl-0 = <&mmc0_4bit_pins_a
	73	&mmc0_cd_cfg &mmc0_sck_cfg>;
a3f8c564	74	vmmc-supply = <&reg_vddio_sd0>;
330eaaf9 MR	75	bus-width = <4>;
	76	status = "okay";
	77	};
	78	};
	79
	80	apbx@80040000 {
	81	duart: serial@80074000 {
	82	pinctrl-names = "default";
	83	pinctrl-0 = <&duart_pins_b>;
	84	status = "okay";
	85	};
25d6dd85 MR	86
	87	i2c0: i2c@80058000 {
	88	pinctrl-names = "default";
	89	pinctrl-0 = <&i2c0_pins_b>;
b55cb191	90	clock-frequency = <400000>;
25d6dd85 MR	91	status = "okay";
25d6dd85 MR	92
b400932c MR	93	ssd1306: oled@3c {
b400932c MR	94	compatible = "solomon,ssd1306fb-i2c";
a74d2ec7 AB	95	pinctrl-names = "default";
a74d2ec7 AB	96	pinctrl-0 = <&ssd1306_cfa10036>;
25d6dd85	97	reg = <0x3c>;
25d6dd85	98	reset-gpios = <&gpio2 7 0>;
b400932c MR	99	solomon,height = <32>;
	100	solomon,width = <128>;
	101	solomon,page-offset = <0>;
20400851 TN	102	solomon,com-lrremap;
	103	solomon,com-invdir;
	104	solomon,com-offset = <32>;
25d6dd85 MR	105	};
25d6dd85 MR	106	};
17a21638 MR	107
	108	usbphy0: usbphy@8007c000 {
	109	status = "okay";
	110	};
	111	};
	112	};
	113
	114	ahb@80080000 {
	115	usb0: usb@80080000 {
	116	pinctrl-names = "default";
	117	pinctrl-0 = <&usb0_otg_cfa10036>;
c896238c MR	118	dr_mode = "peripheral";
c896238c MR	119	phy_type = "utmi";
17a21638	120	status = "okay";
330eaaf9 MR	121	};
330eaaf9 MR	122	};
f34ffc9e MR	123
	124	leds {
	125	compatible = "gpio-leds";
c241d0a3 MR	126	pinctrl-names = "default";
c241d0a3 MR	127	pinctrl-0 = <&led_pins_cfa10036>;
f34ffc9e MR	128
	129	power {
	130	gpios = <&gpio3 4 1>;
	131	default-state = "on";
	132	};
	133	};
a3f8c564 AB	134
	135	reg_vddio_sd0: vddio-sd0 {
	136	compatible = "regulator-fixed";
	137	pinctrl-names = "default";
	138	pinctrl-0 = <&mmc_pwr_cfa10036>;
	139	regulator-name = "vddio-sd0";
	140	regulator-min-microvolt = <3300000>;
	141	regulator-max-microvolt = <3300000>;
	142	gpio = <&gpio3 28 0>;
	143	};
330eaaf9	144	};