]>
Commit | Line | Data |
---|---|---|
260cb6a6 | 1 | /* |
4f5b6ba6 LW |
2 | * Copyright 2012 <LW@KARO-electronics.de> |
3 | * based on imx53-qsb.dts | |
4 | * Copyright 2011 Freescale Semiconductor, Inc. | |
5 | * Copyright 2011 Linaro Ltd. | |
260cb6a6 ST |
6 | * |
7 | * The code contained herein is licensed under the GNU General Public | |
8 | * License. You may obtain a copy of the GNU General Public License | |
4f5b6ba6 | 9 | * Version 2 at the following locations: |
260cb6a6 ST |
10 | * |
11 | * http://www.opensource.org/licenses/gpl-license.html | |
12 | * http://www.gnu.org/copyleft/gpl.html | |
13 | */ | |
14 | ||
4f5b6ba6 LW |
15 | #include "imx53.dtsi" |
16 | #include <dt-bindings/gpio/gpio.h> | |
260cb6a6 ST |
17 | |
18 | / { | |
4f5b6ba6 | 19 | model = "Ka-Ro electronics TX53 module"; |
260cb6a6 ST |
20 | compatible = "karo,tx53", "fsl,imx53"; |
21 | ||
4f5b6ba6 LW |
22 | aliases { |
23 | can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */ | |
24 | can1 = &can1; | |
25 | ipu = &ipu; | |
26 | reg_can_xcvr = ®_can_xcvr; | |
27 | usbh1 = &usbh1; | |
28 | usbotg = &usbotg; | |
29 | }; | |
30 | ||
31 | clocks { | |
32 | ckih1 { | |
33 | clock-frequency = <0>; | |
34 | }; | |
35 | ||
36 | mclk: clock@0 { | |
37 | compatible = "fixed-clock"; | |
38 | reg = <0>; | |
39 | #clock-cells = <0>; | |
40 | clock-frequency = <27000000>; | |
41 | }; | |
42 | }; | |
43 | ||
44 | gpio-keys { | |
45 | compatible = "gpio-keys"; | |
46 | pinctrl-names = "default"; | |
47 | pinctrl-0 = <&pinctrl_gpio_key>; | |
48 | ||
49 | power { | |
50 | label = "Power Button"; | |
51 | gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; | |
52 | linux,code = <116>; /* KEY_POWER */ | |
53 | gpio-key,wakeup; | |
54 | }; | |
55 | }; | |
56 | ||
57 | leds { | |
58 | compatible = "gpio-leds"; | |
59 | pinctrl-names = "default"; | |
60 | pinctrl-0 = <&pinctrl_stk5led>; | |
61 | ||
62 | user { | |
63 | label = "Heartbeat"; | |
64 | gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; | |
65 | linux,default-trigger = "heartbeat"; | |
66 | }; | |
260cb6a6 ST |
67 | }; |
68 | ||
69 | regulators { | |
70 | compatible = "simple-bus"; | |
352d318c SG |
71 | #address-cells = <1>; |
72 | #size-cells = <0>; | |
260cb6a6 | 73 | |
4f5b6ba6 | 74 | reg_2v5: regulator@0 { |
260cb6a6 | 75 | compatible = "regulator-fixed"; |
352d318c | 76 | reg = <0>; |
4f5b6ba6 LW |
77 | regulator-name = "2V5"; |
78 | regulator-min-microvolt = <2500000>; | |
79 | regulator-max-microvolt = <2500000>; | |
80 | }; | |
81 | ||
82 | reg_3v3: regulator@1 { | |
83 | compatible = "regulator-fixed"; | |
84 | reg = <1>; | |
85 | regulator-name = "3V3"; | |
86 | regulator-min-microvolt = <3300000>; | |
87 | regulator-max-microvolt = <3300000>; | |
88 | }; | |
89 | ||
90 | reg_can_xcvr: regulator@2 { | |
91 | compatible = "regulator-fixed"; | |
92 | reg = <2>; | |
93 | regulator-name = "CAN XCVR"; | |
260cb6a6 ST |
94 | regulator-min-microvolt = <3300000>; |
95 | regulator-max-microvolt = <3300000>; | |
4f5b6ba6 LW |
96 | pinctrl-names = "default"; |
97 | pinctrl-0 = <&pinctrl_can_xcvr>; | |
98 | gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; | |
260cb6a6 | 99 | }; |
4f5b6ba6 LW |
100 | |
101 | reg_usbh1_vbus: regulator@3 { | |
102 | compatible = "regulator-fixed"; | |
103 | reg = <3>; | |
104 | regulator-name = "usbh1_vbus"; | |
105 | regulator-min-microvolt = <5000000>; | |
106 | regulator-max-microvolt = <5000000>; | |
107 | pinctrl-names = "default"; | |
108 | pinctrl-0 = <&pinctrl_usbh1_vbus>; | |
109 | gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; | |
110 | enable-active-high; | |
111 | }; | |
112 | ||
113 | reg_usbotg_vbus: regulator@4 { | |
114 | compatible = "regulator-fixed"; | |
115 | reg = <4>; | |
116 | regulator-name = "usbotg_vbus"; | |
117 | regulator-min-microvolt = <5000000>; | |
118 | regulator-max-microvolt = <5000000>; | |
119 | pinctrl-names = "default"; | |
120 | pinctrl-0 = <&pinctrl_usbotg_vbus>; | |
121 | gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; | |
122 | enable-active-high; | |
123 | }; | |
124 | }; | |
125 | ||
126 | sound { | |
127 | compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000"; | |
128 | model = "tx53-audio-sgtl5000"; | |
129 | ssi-controller = <&ssi1>; | |
130 | audio-codec = <&sgtl5000>; | |
131 | audio-routing = | |
132 | "MIC_IN", "Mic Jack", | |
133 | "Mic Jack", "Mic Bias", | |
134 | "Headphone Jack", "HP_OUT"; | |
135 | /* '1' based port numbers according to datasheet names */ | |
136 | mux-int-port = <1>; | |
137 | mux-ext-port = <5>; | |
260cb6a6 ST |
138 | }; |
139 | }; | |
140 | ||
4f5b6ba6 LW |
141 | &audmux { |
142 | pinctrl-names = "default"; | |
143 | pinctrl-0 = <&pinctrl_ssi1>; | |
144 | status = "okay"; | |
145 | }; | |
146 | ||
260cb6a6 ST |
147 | &can1 { |
148 | pinctrl-names = "default"; | |
4f5b6ba6 LW |
149 | pinctrl-0 = <&pinctrl_can1>; |
150 | xceiver-supply = <®_can_xcvr>; | |
151 | status = "okay"; | |
260cb6a6 ST |
152 | }; |
153 | ||
154 | &can2 { | |
155 | pinctrl-names = "default"; | |
4f5b6ba6 LW |
156 | pinctrl-0 = <&pinctrl_can2>; |
157 | xceiver-supply = <®_can_xcvr>; | |
158 | status = "okay"; | |
260cb6a6 ST |
159 | }; |
160 | ||
161 | &ecspi1 { | |
162 | pinctrl-names = "default"; | |
4f5b6ba6 LW |
163 | pinctrl-0 = <&pinctrl_ecspi1>; |
164 | fsl,spi-num-chipselects = <2>; | |
165 | status = "okay"; | |
166 | ||
167 | cs-gpios = < | |
168 | &gpio2 30 GPIO_ACTIVE_HIGH | |
169 | &gpio3 19 GPIO_ACTIVE_HIGH | |
170 | >; | |
171 | ||
172 | spidev0: spi@0 { | |
173 | compatible = "spidev"; | |
174 | reg = <0>; | |
175 | spi-max-frequency = <54000000>; | |
176 | }; | |
177 | ||
178 | spidev1: spi@1 { | |
179 | compatible = "spidev"; | |
180 | reg = <1>; | |
181 | spi-max-frequency = <54000000>; | |
182 | }; | |
260cb6a6 ST |
183 | }; |
184 | ||
185 | &esdhc1 { | |
4f5b6ba6 LW |
186 | cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; |
187 | fsl,wp-controller; | |
260cb6a6 | 188 | pinctrl-names = "default"; |
4f5b6ba6 LW |
189 | pinctrl-0 = <&pinctrl_esdhc1>; |
190 | status = "okay"; | |
260cb6a6 ST |
191 | }; |
192 | ||
193 | &esdhc2 { | |
4f5b6ba6 LW |
194 | cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; |
195 | fsl,wp-controller; | |
260cb6a6 | 196 | pinctrl-names = "default"; |
4f5b6ba6 LW |
197 | pinctrl-0 = <&pinctrl_esdhc2>; |
198 | status = "okay"; | |
260cb6a6 ST |
199 | }; |
200 | ||
201 | &fec { | |
202 | pinctrl-names = "default"; | |
4f5b6ba6 | 203 | pinctrl-0 = <&pinctrl_fec>; |
260cb6a6 | 204 | phy-mode = "rmii"; |
4f5b6ba6 LW |
205 | phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; |
206 | phy-handle = <&phy0>; | |
207 | mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ | |
208 | status = "okay"; | |
209 | ||
210 | phy0: ethernet-phy@0 { | |
211 | interrupt-parent = <&gpio2>; | |
212 | interrupts = <4>; | |
213 | device_type = "ethernet-phy"; | |
214 | }; | |
260cb6a6 ST |
215 | }; |
216 | ||
4f5b6ba6 | 217 | &i2c1 { |
260cb6a6 | 218 | pinctrl-names = "default"; |
4f5b6ba6 LW |
219 | pinctrl-0 = <&pinctrl_i2c1>; |
220 | clock-frequency = <400000>; | |
221 | status = "okay"; | |
222 | ||
223 | rtc1: ds1339@68 { | |
224 | compatible = "dallas,ds1339"; | |
225 | reg = <0x68>; | |
226 | pinctrl-names = "default"; | |
227 | pinctrl-0 = <&pinctrl_ds1339>; | |
228 | interrupt-parent = <&gpio4>; | |
229 | interrupts = <20 0>; | |
230 | }; | |
260cb6a6 ST |
231 | }; |
232 | ||
4f5b6ba6 | 233 | &iomuxc { |
260cb6a6 | 234 | pinctrl-names = "default"; |
4f5b6ba6 LW |
235 | pinctrl-0 = <&pinctrl_hog>; |
236 | ||
237 | imx53-tx53 { | |
238 | pinctrl_hog: hoggrp { | |
239 | /* pins not in use by any device on the Starterkit board series */ | |
240 | fsl,pins = < | |
241 | /* CMOS Sensor Interface */ | |
242 | MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4 | |
243 | MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4 | |
244 | MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4 | |
245 | MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4 | |
246 | MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4 | |
247 | MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4 | |
248 | MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4 | |
249 | MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4 | |
250 | MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4 | |
251 | MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4 | |
252 | MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4 | |
253 | MX53_PAD_GPIO_0__GPIO1_0 0x1f4 | |
254 | /* Module Specific Signal */ | |
255 | /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */ | |
256 | /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */ | |
257 | MX53_PAD_EIM_D29__GPIO3_29 0x1f4 | |
258 | MX53_PAD_EIM_EB3__GPIO2_31 0x1f4 | |
259 | /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */ | |
260 | /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */ | |
261 | MX53_PAD_EIM_A19__GPIO2_19 0x1f4 | |
262 | MX53_PAD_EIM_A20__GPIO2_18 0x1f4 | |
263 | MX53_PAD_EIM_A21__GPIO2_17 0x1f4 | |
264 | MX53_PAD_EIM_A22__GPIO2_16 0x1f4 | |
265 | MX53_PAD_EIM_A23__GPIO6_6 0x1f4 | |
266 | MX53_PAD_EIM_A24__GPIO5_4 0x1f4 | |
267 | MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4 | |
268 | MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4 | |
269 | MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4 | |
270 | MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4 | |
271 | /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */ | |
272 | /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */ | |
273 | MX53_PAD_GPIO_13__GPIO4_3 0x1f4 | |
274 | MX53_PAD_EIM_CS0__GPIO2_23 0x1f4 | |
275 | MX53_PAD_EIM_CS1__GPIO2_24 0x1f4 | |
276 | MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4 | |
277 | MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4 | |
278 | MX53_PAD_EIM_EB0__GPIO2_28 0x1f4 | |
279 | MX53_PAD_EIM_EB1__GPIO2_29 0x1f4 | |
280 | MX53_PAD_EIM_OE__GPIO2_25 0x1f4 | |
281 | MX53_PAD_EIM_LBA__GPIO2_27 0x1f4 | |
282 | MX53_PAD_EIM_RW__GPIO2_26 0x1f4 | |
283 | MX53_PAD_EIM_DA8__GPIO3_8 0x1f4 | |
284 | MX53_PAD_EIM_DA9__GPIO3_9 0x1f4 | |
285 | MX53_PAD_EIM_DA10__GPIO3_10 0x1f4 | |
286 | MX53_PAD_EIM_DA11__GPIO3_11 0x1f4 | |
287 | MX53_PAD_EIM_DA12__GPIO3_12 0x1f4 | |
288 | MX53_PAD_EIM_DA13__GPIO3_13 0x1f4 | |
289 | MX53_PAD_EIM_DA14__GPIO3_14 0x1f4 | |
290 | MX53_PAD_EIM_DA15__GPIO3_15 0x1f4 | |
291 | >; | |
292 | }; | |
293 | ||
294 | pinctrl_can1: can1grp { | |
295 | fsl,pins = < | |
296 | MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 | |
297 | MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 | |
298 | >; | |
299 | }; | |
300 | ||
301 | pinctrl_can2: can2grp { | |
302 | fsl,pins = < | |
303 | MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 | |
304 | MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 | |
305 | >; | |
306 | }; | |
307 | ||
308 | pinctrl_can_xcvr: can-xcvrgrp { | |
309 | fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */ | |
310 | }; | |
311 | ||
312 | pinctrl_ds1339: ds1339grp { | |
313 | fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>; | |
314 | }; | |
315 | ||
316 | pinctrl_ecspi1: ecspi1grp { | |
317 | fsl,pins = < | |
318 | MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000 | |
319 | MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000 | |
320 | MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 | |
321 | MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 | |
322 | MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 | |
323 | MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000 | |
324 | >; | |
325 | }; | |
326 | ||
327 | pinctrl_esdhc1: esdhc1grp { | |
328 | fsl,pins = < | |
329 | MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 | |
330 | MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 | |
331 | MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 | |
332 | MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 | |
333 | MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 | |
334 | MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 | |
335 | MX53_PAD_EIM_D24__GPIO3_24 0x1f0 | |
336 | >; | |
337 | }; | |
338 | ||
339 | pinctrl_esdhc2: esdhc2grp { | |
340 | fsl,pins = < | |
341 | MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 | |
342 | MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 | |
343 | MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 | |
344 | MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 | |
345 | MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 | |
346 | MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 | |
347 | MX53_PAD_EIM_D25__GPIO3_25 0x1f0 | |
348 | >; | |
349 | }; | |
350 | ||
351 | pinctrl_fec: fecgrp { | |
352 | fsl,pins = < | |
353 | MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 | |
354 | MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 | |
355 | MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 | |
356 | MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 | |
357 | MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 | |
358 | MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 | |
359 | MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 | |
360 | MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 | |
361 | MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 | |
362 | MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 | |
363 | >; | |
364 | }; | |
365 | ||
366 | pinctrl_gpio_key: gpio-keygrp { | |
367 | fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>; | |
368 | }; | |
369 | ||
370 | pinctrl_i2c1: i2c1grp { | |
371 | fsl,pins = < | |
372 | MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 | |
373 | MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 | |
374 | >; | |
375 | }; | |
376 | ||
377 | pinctrl_i2c3: i2c3grp { | |
378 | fsl,pins = < | |
379 | MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000 | |
380 | MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 | |
381 | >; | |
382 | }; | |
383 | ||
384 | pinctrl_nand: nandgrp { | |
385 | fsl,pins = < | |
386 | MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 | |
387 | MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 | |
388 | MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 | |
389 | MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 | |
390 | MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 | |
391 | MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 | |
392 | MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 | |
393 | MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4 | |
394 | MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4 | |
395 | MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4 | |
396 | MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4 | |
397 | MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4 | |
398 | MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4 | |
399 | MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4 | |
400 | MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4 | |
401 | >; | |
402 | }; | |
403 | ||
404 | pinctrl_pwm2: pwm2grp { | |
405 | fsl,pins = < | |
406 | MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 | |
407 | >; | |
408 | }; | |
409 | ||
410 | pinctrl_ssi1: ssi1grp { | |
411 | fsl,pins = < | |
412 | MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 | |
413 | MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 | |
414 | MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 | |
415 | MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 | |
416 | >; | |
417 | }; | |
418 | ||
419 | pinctrl_ssi2: ssi2grp { | |
420 | fsl,pins = < | |
421 | MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000 | |
422 | MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000 | |
423 | MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000 | |
424 | MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000 | |
425 | MX53_PAD_EIM_D27__GPIO3_27 0x1f0 | |
426 | >; | |
427 | }; | |
428 | ||
429 | pinctrl_stk5led: stk5ledgrp { | |
430 | fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>; | |
431 | }; | |
432 | ||
433 | pinctrl_uart1: uart1grp { | |
434 | fsl,pins = < | |
435 | MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 | |
436 | MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 | |
437 | MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5 | |
438 | MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5 | |
439 | >; | |
440 | }; | |
441 | ||
442 | pinctrl_uart2: uart2grp { | |
443 | fsl,pins = < | |
444 | MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 | |
445 | MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 | |
446 | MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 | |
447 | MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 | |
448 | >; | |
449 | }; | |
450 | ||
451 | pinctrl_uart3: uart3grp { | |
452 | fsl,pins = < | |
453 | MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 | |
454 | MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 | |
455 | MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4 | |
456 | MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 | |
457 | >; | |
458 | }; | |
459 | ||
460 | pinctrl_usbh1: usbh1grp { | |
461 | fsl,pins = < | |
462 | MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */ | |
463 | >; | |
464 | }; | |
465 | ||
466 | pinctrl_usbh1_vbus: usbh1-vbusgrp { | |
467 | fsl,pins = < | |
468 | MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */ | |
469 | >; | |
470 | }; | |
471 | ||
472 | pinctrl_usbotg_vbus: usbotg-vbusgrp { | |
473 | fsl,pins = < | |
474 | MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */ | |
475 | MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */ | |
476 | >; | |
477 | }; | |
478 | }; | |
479 | }; | |
480 | ||
481 | &ipu { | |
482 | status = "okay"; | |
483 | }; | |
484 | ||
485 | &nfc { | |
486 | pinctrl-names = "default"; | |
487 | pinctrl-0 = <&pinctrl_nand>; | |
488 | nand-bus-width = <8>; | |
489 | nand-ecc-mode = "hw"; | |
490 | nand-on-flash-bbt; | |
491 | status = "okay"; | |
260cb6a6 ST |
492 | }; |
493 | ||
494 | &pwm2 { | |
495 | pinctrl-names = "default"; | |
4f5b6ba6 LW |
496 | pinctrl-0 = <&pinctrl_pwm2>; |
497 | #pwm-cells = <3>; | |
498 | }; | |
499 | ||
500 | &sdma { | |
501 | fsl,sdma-ram-script-name = "sdma-imx53.bin"; | |
260cb6a6 ST |
502 | }; |
503 | ||
504 | &ssi1 { | |
4f5b6ba6 LW |
505 | fsl,mode = "i2s-slave"; |
506 | codec-handle = <&sgtl5000>; | |
507 | status = "okay"; | |
260cb6a6 ST |
508 | }; |
509 | ||
510 | &ssi2 { | |
260cb6a6 ST |
511 | status = "disabled"; |
512 | }; | |
513 | ||
514 | &uart1 { | |
515 | pinctrl-names = "default"; | |
4f5b6ba6 | 516 | pinctrl-0 = <&pinctrl_uart1>; |
260cb6a6 | 517 | fsl,uart-has-rtscts; |
4f5b6ba6 | 518 | status = "okay"; |
260cb6a6 ST |
519 | }; |
520 | ||
521 | &uart2 { | |
522 | pinctrl-names = "default"; | |
4f5b6ba6 | 523 | pinctrl-0 = <&pinctrl_uart2>; |
260cb6a6 | 524 | fsl,uart-has-rtscts; |
4f5b6ba6 | 525 | status = "okay"; |
260cb6a6 ST |
526 | }; |
527 | ||
528 | &uart3 { | |
529 | pinctrl-names = "default"; | |
4f5b6ba6 | 530 | pinctrl-0 = <&pinctrl_uart3>; |
260cb6a6 | 531 | fsl,uart-has-rtscts; |
4f5b6ba6 LW |
532 | status = "okay"; |
533 | }; | |
534 | ||
535 | &usbh1 { | |
536 | pinctrl-names = "default"; | |
537 | pinctrl-0 = <&pinctrl_usbh1>; | |
538 | phy_type = "utmi"; | |
539 | disable-over-current; | |
540 | vbus-supply = <®_usbh1_vbus>; | |
541 | status = "okay"; | |
542 | }; | |
543 | ||
544 | &usbotg { | |
545 | phy_type = "utmi"; | |
546 | dr_mode = "peripheral"; | |
547 | disable-over-current; | |
548 | vbus-supply = <®_usbotg_vbus>; | |
549 | status = "okay"; | |
260cb6a6 | 550 | }; |