]>
Commit | Line | Data |
---|---|---|
e3946fe8 TH |
1 | /* |
2 | * Copyright 2013 Gateworks Corporation | |
3 | * | |
4 | * The code contained herein is licensed under the GNU General Public | |
5 | * License. You may obtain a copy of the GNU General Public License | |
6 | * Version 2 or later at the following locations: | |
7 | * | |
8 | * http://www.opensource.org/licenses/gpl-license.html | |
9 | * http://www.gnu.org/copyleft/gpl.html | |
10 | */ | |
11 | ||
12 | /dts-v1/; | |
13 | #include "imx6q.dtsi" | |
14 | ||
15 | / { | |
16 | model = "Gateworks Ventana GW5400-A"; | |
17 | compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q"; | |
18 | ||
19 | /* these are used by bootloader for disabling nodes */ | |
20 | aliases { | |
21 | ethernet0 = &fec; | |
22 | ethernet1 = ð1; | |
23 | i2c0 = &i2c1; | |
24 | i2c1 = &i2c2; | |
25 | i2c2 = &i2c3; | |
26 | led0 = &led0; | |
27 | led1 = &led1; | |
28 | led2 = &led2; | |
29 | sky2 = ð1; | |
30 | ssi0 = &ssi1; | |
31 | spi0 = &ecspi1; | |
32 | usb0 = &usbh1; | |
33 | usb1 = &usbotg; | |
34 | usdhc2 = &usdhc3; | |
35 | }; | |
36 | ||
37 | chosen { | |
38 | bootargs = "console=ttymxc1,115200"; | |
39 | }; | |
40 | ||
41 | leds { | |
42 | compatible = "gpio-leds"; | |
43 | ||
44 | led0: user1 { | |
45 | label = "user1"; | |
46 | gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ | |
47 | default-state = "on"; | |
48 | linux,default-trigger = "heartbeat"; | |
49 | }; | |
50 | ||
51 | led1: user2 { | |
52 | label = "user2"; | |
53 | gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */ | |
54 | default-state = "off"; | |
55 | }; | |
56 | ||
57 | led2: user3 { | |
58 | label = "user3"; | |
59 | gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ | |
60 | default-state = "off"; | |
61 | }; | |
62 | }; | |
63 | ||
64 | memory { | |
65 | reg = <0x10000000 0x40000000>; | |
66 | }; | |
67 | ||
68 | pps { | |
69 | compatible = "pps-gpio"; | |
70 | gpios = <&gpio1 5 0>; | |
71 | status = "okay"; | |
72 | }; | |
73 | ||
74 | regulators { | |
75 | compatible = "simple-bus"; | |
76 | #address-cells = <1>; | |
77 | #size-cells = <0>; | |
78 | ||
79 | reg_1p0v: regulator@0 { | |
80 | compatible = "regulator-fixed"; | |
81 | reg = <0>; | |
82 | regulator-name = "1P0V"; | |
83 | regulator-min-microvolt = <1000000>; | |
84 | regulator-max-microvolt = <1000000>; | |
85 | regulator-always-on; | |
86 | }; | |
87 | ||
88 | reg_3p3v: regulator@1 { | |
89 | compatible = "regulator-fixed"; | |
90 | reg = <1>; | |
91 | regulator-name = "3P3V"; | |
92 | regulator-min-microvolt = <3300000>; | |
93 | regulator-max-microvolt = <3300000>; | |
94 | regulator-always-on; | |
95 | }; | |
96 | ||
97 | reg_usb_h1_vbus: regulator@2 { | |
98 | compatible = "regulator-fixed"; | |
99 | reg = <2>; | |
100 | regulator-name = "usb_h1_vbus"; | |
101 | regulator-min-microvolt = <5000000>; | |
102 | regulator-max-microvolt = <5000000>; | |
103 | regulator-always-on; | |
104 | }; | |
105 | ||
106 | reg_usb_otg_vbus: regulator@3 { | |
107 | compatible = "regulator-fixed"; | |
108 | reg = <3>; | |
109 | regulator-name = "usb_otg_vbus"; | |
110 | regulator-min-microvolt = <5000000>; | |
111 | regulator-max-microvolt = <5000000>; | |
112 | gpio = <&gpio3 22 0>; | |
113 | enable-active-high; | |
114 | }; | |
115 | }; | |
116 | ||
117 | sound { | |
b12d1e94 | 118 | compatible = "fsl,imx6q-ventana-sgtl5000", |
e3946fe8 | 119 | "fsl,imx-audio-sgtl5000"; |
b12d1e94 | 120 | model = "sgtl5000-audio"; |
e3946fe8 TH |
121 | ssi-controller = <&ssi1>; |
122 | audio-codec = <&codec>; | |
123 | audio-routing = | |
124 | "MIC_IN", "Mic Jack", | |
125 | "Mic Jack", "Mic Bias", | |
126 | "Headphone Jack", "HP_OUT"; | |
127 | mux-int-port = <1>; | |
128 | mux-ext-port = <4>; | |
129 | }; | |
130 | }; | |
131 | ||
132 | &audmux { | |
133 | pinctrl-names = "default"; | |
134 | pinctrl-0 = <&pinctrl_audmux>; | |
135 | status = "okay"; | |
136 | }; | |
137 | ||
138 | &ecspi1 { | |
139 | fsl,spi-num-chipselects = <1>; | |
140 | cs-gpios = <&gpio3 19 0>; | |
141 | pinctrl-names = "default"; | |
142 | pinctrl-0 = <&pinctrl_ecspi1>; | |
143 | status = "okay"; | |
144 | ||
145 | flash: m25p80@0 { | |
146 | compatible = "sst,w25q256"; | |
147 | spi-max-frequency = <30000000>; | |
148 | reg = <0>; | |
149 | }; | |
150 | }; | |
151 | ||
152 | &fec { | |
153 | pinctrl-names = "default"; | |
154 | pinctrl-0 = <&pinctrl_enet>; | |
155 | phy-mode = "rgmii"; | |
156 | phy-reset-gpios = <&gpio1 30 0>; | |
157 | status = "okay"; | |
158 | }; | |
159 | ||
aef15dba TH |
160 | &hdmi { |
161 | ddc-i2c-bus = <&i2c3>; | |
162 | status = "okay"; | |
163 | }; | |
164 | ||
e3946fe8 TH |
165 | &i2c1 { |
166 | clock-frequency = <100000>; | |
167 | pinctrl-names = "default"; | |
168 | pinctrl-0 = <&pinctrl_i2c1>; | |
169 | status = "okay"; | |
170 | ||
171 | eeprom1: eeprom@50 { | |
172 | compatible = "atmel,24c02"; | |
173 | reg = <0x50>; | |
174 | pagesize = <16>; | |
175 | }; | |
176 | ||
177 | eeprom2: eeprom@51 { | |
178 | compatible = "atmel,24c02"; | |
179 | reg = <0x51>; | |
180 | pagesize = <16>; | |
181 | }; | |
182 | ||
183 | eeprom3: eeprom@52 { | |
184 | compatible = "atmel,24c02"; | |
185 | reg = <0x52>; | |
186 | pagesize = <16>; | |
187 | }; | |
188 | ||
189 | eeprom4: eeprom@53 { | |
190 | compatible = "atmel,24c02"; | |
191 | reg = <0x53>; | |
192 | pagesize = <16>; | |
193 | }; | |
194 | ||
195 | gpio: pca9555@23 { | |
196 | compatible = "nxp,pca9555"; | |
197 | reg = <0x23>; | |
198 | gpio-controller; | |
199 | #gpio-cells = <2>; | |
200 | }; | |
201 | ||
202 | hwmon: gsc@29 { | |
203 | compatible = "gw,gsp"; | |
204 | reg = <0x29>; | |
205 | }; | |
206 | ||
207 | rtc: ds1672@68 { | |
208 | compatible = "dallas,ds1672"; | |
209 | reg = <0x68>; | |
210 | }; | |
211 | }; | |
212 | ||
213 | &i2c2 { | |
214 | clock-frequency = <100000>; | |
215 | pinctrl-names = "default"; | |
216 | pinctrl-0 = <&pinctrl_i2c2>; | |
217 | status = "okay"; | |
218 | ||
219 | pmic: pfuze100@08 { | |
220 | compatible = "fsl,pfuze100"; | |
221 | reg = <0x08>; | |
222 | ||
223 | regulators { | |
224 | sw1a_reg: sw1ab { | |
225 | regulator-min-microvolt = <300000>; | |
226 | regulator-max-microvolt = <1875000>; | |
227 | regulator-boot-on; | |
228 | regulator-always-on; | |
229 | regulator-ramp-delay = <6250>; | |
230 | }; | |
231 | ||
232 | sw1c_reg: sw1c { | |
233 | regulator-min-microvolt = <300000>; | |
234 | regulator-max-microvolt = <1875000>; | |
235 | regulator-boot-on; | |
236 | regulator-always-on; | |
237 | regulator-ramp-delay = <6250>; | |
238 | }; | |
239 | ||
240 | sw2_reg: sw2 { | |
241 | regulator-min-microvolt = <800000>; | |
242 | regulator-max-microvolt = <3950000>; | |
243 | regulator-boot-on; | |
244 | regulator-always-on; | |
245 | }; | |
246 | ||
247 | sw3a_reg: sw3a { | |
248 | regulator-min-microvolt = <400000>; | |
249 | regulator-max-microvolt = <1975000>; | |
250 | regulator-boot-on; | |
251 | regulator-always-on; | |
252 | }; | |
253 | ||
254 | sw3b_reg: sw3b { | |
255 | regulator-min-microvolt = <400000>; | |
256 | regulator-max-microvolt = <1975000>; | |
257 | regulator-boot-on; | |
258 | regulator-always-on; | |
259 | }; | |
260 | ||
261 | sw4_reg: sw4 { | |
262 | regulator-min-microvolt = <800000>; | |
263 | regulator-max-microvolt = <3300000>; | |
264 | }; | |
265 | ||
266 | swbst_reg: swbst { | |
267 | regulator-min-microvolt = <5000000>; | |
268 | regulator-max-microvolt = <5150000>; | |
269 | }; | |
270 | ||
271 | snvs_reg: vsnvs { | |
272 | regulator-min-microvolt = <1000000>; | |
273 | regulator-max-microvolt = <3000000>; | |
274 | regulator-boot-on; | |
275 | regulator-always-on; | |
276 | }; | |
277 | ||
278 | vref_reg: vrefddr { | |
279 | regulator-boot-on; | |
280 | regulator-always-on; | |
281 | }; | |
282 | ||
283 | vgen1_reg: vgen1 { | |
284 | regulator-min-microvolt = <800000>; | |
285 | regulator-max-microvolt = <1550000>; | |
286 | }; | |
287 | ||
288 | vgen2_reg: vgen2 { | |
289 | regulator-min-microvolt = <800000>; | |
290 | regulator-max-microvolt = <1550000>; | |
291 | }; | |
292 | ||
293 | vgen3_reg: vgen3 { | |
294 | regulator-min-microvolt = <1800000>; | |
295 | regulator-max-microvolt = <3300000>; | |
296 | }; | |
297 | ||
298 | vgen4_reg: vgen4 { | |
299 | regulator-min-microvolt = <1800000>; | |
300 | regulator-max-microvolt = <3300000>; | |
301 | regulator-always-on; | |
302 | }; | |
303 | ||
304 | vgen5_reg: vgen5 { | |
305 | regulator-min-microvolt = <1800000>; | |
306 | regulator-max-microvolt = <3300000>; | |
307 | regulator-always-on; | |
308 | }; | |
309 | ||
310 | vgen6_reg: vgen6 { | |
311 | regulator-min-microvolt = <1800000>; | |
312 | regulator-max-microvolt = <3300000>; | |
313 | regulator-always-on; | |
314 | }; | |
315 | }; | |
316 | }; | |
317 | ||
318 | pciswitch: pex8609@3f { | |
319 | compatible = "plx,pex8609"; | |
320 | reg = <0x3f>; | |
321 | }; | |
322 | ||
323 | pciclkgen: si52147@6b { | |
324 | compatible = "sil,si52147"; | |
325 | reg = <0x6b>; | |
326 | }; | |
327 | }; | |
328 | ||
329 | &i2c3 { | |
330 | clock-frequency = <100000>; | |
331 | pinctrl-names = "default"; | |
332 | pinctrl-0 = <&pinctrl_i2c3>; | |
333 | status = "okay"; | |
334 | ||
335 | accelerometer: mma8450@1c { | |
336 | compatible = "fsl,mma8450"; | |
337 | reg = <0x1c>; | |
338 | }; | |
339 | ||
340 | codec: sgtl5000@0a { | |
341 | compatible = "fsl,sgtl5000"; | |
342 | reg = <0x0a>; | |
343 | clocks = <&clks 201>; | |
344 | VDDA-supply = <&sw4_reg>; | |
345 | VDDIO-supply = <®_3p3v>; | |
346 | }; | |
347 | ||
348 | hdmiin: adv7611@4c { | |
349 | compatible = "adi,adv7611"; | |
350 | reg = <0x4c>; | |
351 | }; | |
352 | ||
353 | touchscreen: egalax_ts@04 { | |
354 | compatible = "eeti,egalax_ts"; | |
355 | reg = <0x04>; | |
356 | interrupt-parent = <&gpio7>; | |
357 | interrupts = <12 2>; /* gpio7_12 active low */ | |
358 | wakeup-gpios = <&gpio7 12 0>; | |
359 | }; | |
360 | ||
361 | videoout: adv7393@2a { | |
362 | compatible = "adi,adv7393"; | |
363 | reg = <0x2a>; | |
364 | }; | |
365 | ||
366 | videoin: adv7180@20 { | |
367 | compatible = "adi,adv7180"; | |
368 | reg = <0x20>; | |
369 | }; | |
370 | }; | |
371 | ||
372 | &iomuxc { | |
373 | pinctrl-names = "default"; | |
374 | pinctrl-0 = <&pinctrl_hog>; | |
375 | ||
376 | imx6q-gw5400-a { | |
377 | pinctrl_hog: hoggrp { | |
378 | fsl,pins = < | |
379 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ | |
380 | MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ | |
381 | MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ | |
382 | MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ | |
383 | MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ | |
384 | MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */ | |
385 | MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ | |
386 | MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ | |
387 | MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */ | |
388 | MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ | |
389 | MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ | |
390 | MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ | |
391 | >; | |
392 | }; | |
393 | ||
394 | pinctrl_audmux: audmuxgrp { | |
395 | fsl,pins = < | |
396 | MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0 | |
397 | MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0 | |
398 | MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0 | |
399 | MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0 | |
400 | >; | |
401 | }; | |
402 | ||
403 | pinctrl_ecspi1: ecspi1grp { | |
404 | fsl,pins = < | |
405 | MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 | |
406 | MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 | |
407 | MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 | |
408 | >; | |
409 | }; | |
410 | ||
411 | pinctrl_enet: enetgrp { | |
412 | fsl,pins = < | |
413 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 | |
414 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 | |
415 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 | |
416 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 | |
417 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 | |
418 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 | |
419 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 | |
420 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 | |
421 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 | |
422 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 | |
423 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 | |
424 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 | |
425 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 | |
426 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 | |
427 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 | |
428 | MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 | |
429 | >; | |
430 | }; | |
431 | ||
432 | pinctrl_i2c1: i2c1grp { | |
433 | fsl,pins = < | |
434 | MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 | |
435 | MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 | |
436 | >; | |
437 | }; | |
438 | ||
439 | pinctrl_i2c2: i2c2grp { | |
440 | fsl,pins = < | |
441 | MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 | |
442 | MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 | |
443 | >; | |
444 | }; | |
445 | ||
446 | pinctrl_i2c3: i2c3grp { | |
447 | fsl,pins = < | |
448 | MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 | |
449 | MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 | |
450 | >; | |
451 | }; | |
452 | ||
453 | pinctrl_uart1: uart1grp { | |
454 | fsl,pins = < | |
455 | MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 | |
456 | MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 | |
457 | >; | |
458 | }; | |
459 | ||
460 | pinctrl_uart2: uart2grp { | |
461 | fsl,pins = < | |
462 | MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 | |
463 | MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 | |
464 | >; | |
465 | }; | |
466 | ||
467 | pinctrl_uart5: uart5grp { | |
468 | fsl,pins = < | |
469 | MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 | |
470 | MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 | |
471 | >; | |
472 | }; | |
473 | ||
474 | pinctrl_usbotg: usbotggrp { | |
475 | fsl,pins = < | |
476 | MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 | |
477 | >; | |
478 | }; | |
479 | ||
480 | pinctrl_usdhc3: usdhc3grp { | |
481 | fsl,pins = < | |
482 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 | |
483 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 | |
484 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 | |
485 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 | |
486 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 | |
487 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 | |
488 | >; | |
489 | }; | |
490 | }; | |
491 | }; | |
492 | ||
493 | &ldb { | |
494 | status = "okay"; | |
e3946fe8 TH |
495 | }; |
496 | ||
497 | &pcie { | |
498 | reset-gpio = <&gpio1 29 0>; | |
499 | status = "okay"; | |
500 | ||
501 | eth1: sky2@8 { /* MAC/PHY on bus 8 */ | |
502 | compatible = "marvell,sky2"; | |
503 | }; | |
504 | }; | |
505 | ||
506 | &ssi1 { | |
e3946fe8 TH |
507 | status = "okay"; |
508 | }; | |
509 | ||
510 | &uart1 { | |
511 | pinctrl-names = "default"; | |
512 | pinctrl-0 = <&pinctrl_uart1>; | |
513 | status = "okay"; | |
514 | }; | |
515 | ||
516 | &uart2 { | |
517 | pinctrl-names = "default"; | |
518 | pinctrl-0 = <&pinctrl_uart2>; | |
519 | status = "okay"; | |
520 | }; | |
521 | ||
522 | &uart5 { | |
523 | pinctrl-names = "default"; | |
524 | pinctrl-0 = <&pinctrl_uart5>; | |
525 | status = "okay"; | |
526 | }; | |
527 | ||
528 | &usbotg { | |
529 | vbus-supply = <®_usb_otg_vbus>; | |
530 | pinctrl-names = "default"; | |
531 | pinctrl-0 = <&pinctrl_usbotg>; | |
532 | disable-over-current; | |
533 | status = "okay"; | |
534 | }; | |
535 | ||
536 | &usbh1 { | |
537 | vbus-supply = <®_usb_h1_vbus>; | |
538 | status = "okay"; | |
539 | }; | |
540 | ||
541 | &usdhc3 { | |
542 | pinctrl-names = "default"; | |
543 | pinctrl-0 = <&pinctrl_usdhc3>; | |
544 | cd-gpios = <&gpio7 0 0>; | |
545 | vmmc-supply = <®_3p3v>; | |
546 | status = "okay"; | |
547 | }; |