]>
Commit | Line | Data |
---|---|---|
b1d17f68 SG |
1 | /* |
2 | * Copyright 2014 Freescale Semiconductor, Inc. | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | ||
9 | #include <dt-bindings/clock/imx6sx-clock.h> | |
10 | #include <dt-bindings/gpio/gpio.h> | |
11 | #include <dt-bindings/interrupt-controller/arm-gic.h> | |
12 | #include "imx6sx-pinfunc.h" | |
13 | #include "skeleton.dtsi" | |
14 | ||
15 | / { | |
16 | aliases { | |
17 | can0 = &flexcan1; | |
18 | can1 = &flexcan2; | |
19 | ethernet0 = &fec1; | |
20 | ethernet1 = &fec2; | |
21 | gpio0 = &gpio1; | |
22 | gpio1 = &gpio2; | |
23 | gpio2 = &gpio3; | |
24 | gpio3 = &gpio4; | |
25 | gpio4 = &gpio5; | |
26 | gpio5 = &gpio6; | |
27 | gpio6 = &gpio7; | |
28 | i2c0 = &i2c1; | |
29 | i2c1 = &i2c2; | |
30 | i2c2 = &i2c3; | |
31 | i2c3 = &i2c4; | |
32 | mmc0 = &usdhc1; | |
33 | mmc1 = &usdhc2; | |
34 | mmc2 = &usdhc3; | |
35 | mmc3 = &usdhc4; | |
36 | serial0 = &uart1; | |
37 | serial1 = &uart2; | |
38 | serial2 = &uart3; | |
39 | serial3 = &uart4; | |
40 | serial4 = &uart5; | |
41 | serial5 = &uart6; | |
42 | spi0 = &ecspi1; | |
43 | spi1 = &ecspi2; | |
44 | spi2 = &ecspi3; | |
45 | spi3 = &ecspi4; | |
46 | spi4 = &ecspi5; | |
47 | usbphy0 = &usbphy1; | |
48 | usbphy1 = &usbphy2; | |
49 | }; | |
50 | ||
51 | cpus { | |
52 | #address-cells = <1>; | |
53 | #size-cells = <0>; | |
54 | ||
55 | cpu0: cpu@0 { | |
56 | compatible = "arm,cortex-a9"; | |
57 | device_type = "cpu"; | |
58 | reg = <0>; | |
59 | next-level-cache = <&L2>; | |
60 | operating-points = < | |
61 | /* kHz uV */ | |
62 | 996000 1250000 | |
63 | 792000 1175000 | |
64 | 396000 1075000 | |
65 | >; | |
66 | fsl,soc-operating-points = < | |
67 | /* ARM kHz SOC uV */ | |
68 | 996000 1175000 | |
69 | 792000 1175000 | |
70 | 396000 1175000 | |
71 | >; | |
72 | clock-latency = <61036>; /* two CLK32 periods */ | |
73 | clocks = <&clks IMX6SX_CLK_ARM>, | |
74 | <&clks IMX6SX_CLK_PLL2_PFD2>, | |
75 | <&clks IMX6SX_CLK_STEP>, | |
76 | <&clks IMX6SX_CLK_PLL1_SW>, | |
77 | <&clks IMX6SX_CLK_PLL1_SYS>; | |
78 | clock-names = "arm", "pll2_pfd2_396m", "step", | |
79 | "pll1_sw", "pll1_sys"; | |
80 | arm-supply = <®_arm>; | |
81 | soc-supply = <®_soc>; | |
82 | }; | |
83 | }; | |
84 | ||
85 | intc: interrupt-controller@00a01000 { | |
86 | compatible = "arm,cortex-a9-gic"; | |
87 | #interrupt-cells = <3>; | |
88 | interrupt-controller; | |
89 | reg = <0x00a01000 0x1000>, | |
90 | <0x00a00100 0x100>; | |
b923ff6a | 91 | interrupt-parent = <&intc>; |
b1d17f68 SG |
92 | }; |
93 | ||
94 | clocks { | |
95 | #address-cells = <1>; | |
96 | #size-cells = <0>; | |
97 | ||
98 | ckil: clock@0 { | |
99 | compatible = "fixed-clock"; | |
100 | reg = <0>; | |
101 | #clock-cells = <0>; | |
102 | clock-frequency = <32768>; | |
103 | clock-output-names = "ckil"; | |
104 | }; | |
105 | ||
106 | osc: clock@1 { | |
107 | compatible = "fixed-clock"; | |
108 | reg = <1>; | |
109 | #clock-cells = <0>; | |
110 | clock-frequency = <24000000>; | |
111 | clock-output-names = "osc"; | |
112 | }; | |
113 | ||
114 | ipp_di0: clock@2 { | |
115 | compatible = "fixed-clock"; | |
116 | reg = <2>; | |
117 | #clock-cells = <0>; | |
118 | clock-frequency = <0>; | |
119 | clock-output-names = "ipp_di0"; | |
120 | }; | |
121 | ||
122 | ipp_di1: clock@3 { | |
123 | compatible = "fixed-clock"; | |
124 | reg = <3>; | |
125 | #clock-cells = <0>; | |
126 | clock-frequency = <0>; | |
127 | clock-output-names = "ipp_di1"; | |
128 | }; | |
129 | }; | |
130 | ||
131 | soc { | |
132 | #address-cells = <1>; | |
133 | #size-cells = <1>; | |
134 | compatible = "simple-bus"; | |
b923ff6a | 135 | interrupt-parent = <&gpc>; |
b1d17f68 SG |
136 | ranges; |
137 | ||
138 | pmu { | |
139 | compatible = "arm,cortex-a9-pmu"; | |
140 | interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; | |
141 | }; | |
142 | ||
143 | ocram: sram@00900000 { | |
144 | compatible = "mmio-sram"; | |
145 | reg = <0x00900000 0x20000>; | |
146 | clocks = <&clks IMX6SX_CLK_OCRAM>; | |
147 | }; | |
148 | ||
149 | L2: l2-cache@00a02000 { | |
150 | compatible = "arm,pl310-cache"; | |
151 | reg = <0x00a02000 0x1000>; | |
152 | interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; | |
153 | cache-unified; | |
154 | cache-level = <2>; | |
155 | arm,tag-latency = <4 2 3>; | |
156 | arm,data-latency = <4 2 3>; | |
157 | }; | |
158 | ||
159 | dma_apbh: dma-apbh@01804000 { | |
160 | compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; | |
161 | reg = <0x01804000 0x2000>; | |
162 | interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, | |
163 | <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, | |
164 | <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, | |
165 | <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; | |
166 | interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; | |
167 | #dma-cells = <1>; | |
168 | dma-channels = <4>; | |
169 | clocks = <&clks IMX6SX_CLK_APBH_DMA>; | |
170 | }; | |
171 | ||
172 | gpmi: gpmi-nand@01806000{ | |
173 | compatible = "fsl,imx6sx-gpmi-nand"; | |
174 | #address-cells = <1>; | |
175 | #size-cells = <1>; | |
176 | reg = <0x01806000 0x2000>, <0x01808000 0x4000>; | |
177 | reg-names = "gpmi-nand", "bch"; | |
178 | interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; | |
179 | interrupt-names = "bch"; | |
180 | clocks = <&clks IMX6SX_CLK_GPMI_IO>, | |
181 | <&clks IMX6SX_CLK_GPMI_APB>, | |
182 | <&clks IMX6SX_CLK_GPMI_BCH>, | |
183 | <&clks IMX6SX_CLK_GPMI_BCH_APB>, | |
184 | <&clks IMX6SX_CLK_PER1_BCH>; | |
185 | clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", | |
186 | "gpmi_bch_apb", "per1_bch"; | |
187 | dmas = <&dma_apbh 0>; | |
188 | dma-names = "rx-tx"; | |
189 | status = "disabled"; | |
190 | }; | |
191 | ||
192 | aips1: aips-bus@02000000 { | |
193 | compatible = "fsl,aips-bus", "simple-bus"; | |
194 | #address-cells = <1>; | |
195 | #size-cells = <1>; | |
196 | reg = <0x02000000 0x100000>; | |
197 | ranges; | |
198 | ||
199 | spba-bus@02000000 { | |
200 | compatible = "fsl,spba-bus", "simple-bus"; | |
201 | #address-cells = <1>; | |
202 | #size-cells = <1>; | |
203 | reg = <0x02000000 0x40000>; | |
204 | ranges; | |
205 | ||
206 | spdif: spdif@02004000 { | |
207 | compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; | |
208 | reg = <0x02004000 0x4000>; | |
209 | interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; | |
210 | dmas = <&sdma 14 18 0>, | |
211 | <&sdma 15 18 0>; | |
212 | dma-names = "rx", "tx"; | |
213 | clocks = <&clks IMX6SX_CLK_SPDIF>, | |
214 | <&clks IMX6SX_CLK_OSC>, | |
215 | <&clks IMX6SX_CLK_SPDIF>, | |
216 | <&clks 0>, <&clks 0>, <&clks 0>, | |
217 | <&clks IMX6SX_CLK_IPG>, | |
218 | <&clks 0>, <&clks 0>, | |
219 | <&clks IMX6SX_CLK_SPBA>; | |
220 | clock-names = "core", "rxtx0", | |
221 | "rxtx1", "rxtx2", | |
222 | "rxtx3", "rxtx4", | |
223 | "rxtx5", "rxtx6", | |
224 | "rxtx7", "dma"; | |
225 | status = "disabled"; | |
226 | }; | |
227 | ||
228 | ecspi1: ecspi@02008000 { | |
229 | #address-cells = <1>; | |
230 | #size-cells = <0>; | |
231 | compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; | |
232 | reg = <0x02008000 0x4000>; | |
233 | interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; | |
234 | clocks = <&clks IMX6SX_CLK_ECSPI1>, | |
235 | <&clks IMX6SX_CLK_ECSPI1>; | |
236 | clock-names = "ipg", "per"; | |
237 | status = "disabled"; | |
238 | }; | |
239 | ||
240 | ecspi2: ecspi@0200c000 { | |
241 | #address-cells = <1>; | |
242 | #size-cells = <0>; | |
243 | compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; | |
244 | reg = <0x0200c000 0x4000>; | |
245 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; | |
246 | clocks = <&clks IMX6SX_CLK_ECSPI2>, | |
247 | <&clks IMX6SX_CLK_ECSPI2>; | |
248 | clock-names = "ipg", "per"; | |
249 | status = "disabled"; | |
250 | }; | |
251 | ||
252 | ecspi3: ecspi@02010000 { | |
253 | #address-cells = <1>; | |
254 | #size-cells = <0>; | |
255 | compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; | |
256 | reg = <0x02010000 0x4000>; | |
257 | interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; | |
258 | clocks = <&clks IMX6SX_CLK_ECSPI3>, | |
259 | <&clks IMX6SX_CLK_ECSPI3>; | |
260 | clock-names = "ipg", "per"; | |
261 | status = "disabled"; | |
262 | }; | |
263 | ||
264 | ecspi4: ecspi@02014000 { | |
265 | #address-cells = <1>; | |
266 | #size-cells = <0>; | |
267 | compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; | |
268 | reg = <0x02014000 0x4000>; | |
269 | interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; | |
270 | clocks = <&clks IMX6SX_CLK_ECSPI4>, | |
271 | <&clks IMX6SX_CLK_ECSPI4>; | |
272 | clock-names = "ipg", "per"; | |
273 | status = "disabled"; | |
274 | }; | |
275 | ||
276 | uart1: serial@02020000 { | |
277 | compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; | |
278 | reg = <0x02020000 0x4000>; | |
279 | interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; | |
280 | clocks = <&clks IMX6SX_CLK_UART_IPG>, | |
281 | <&clks IMX6SX_CLK_UART_SERIAL>; | |
282 | clock-names = "ipg", "per"; | |
283 | dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; | |
284 | dma-names = "rx", "tx"; | |
285 | status = "disabled"; | |
286 | }; | |
287 | ||
288 | esai: esai@02024000 { | |
289 | reg = <0x02024000 0x4000>; | |
290 | interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; | |
291 | clocks = <&clks IMX6SX_CLK_ESAI_IPG>, | |
292 | <&clks IMX6SX_CLK_ESAI_MEM>, | |
293 | <&clks IMX6SX_CLK_ESAI_EXTAL>, | |
294 | <&clks IMX6SX_CLK_ESAI_IPG>, | |
295 | <&clks IMX6SX_CLK_SPBA>; | |
296 | clock-names = "core", "mem", "extal", | |
297 | "fsys", "dma"; | |
298 | status = "disabled"; | |
299 | }; | |
300 | ||
301 | ssi1: ssi@02028000 { | |
6ff7f51e | 302 | #sound-dai-cells = <0>; |
4c03527e | 303 | compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; |
b1d17f68 SG |
304 | reg = <0x02028000 0x4000>; |
305 | interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; | |
306 | clocks = <&clks IMX6SX_CLK_SSI1_IPG>, | |
307 | <&clks IMX6SX_CLK_SSI1>; | |
308 | clock-names = "ipg", "baud"; | |
309 | dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; | |
310 | dma-names = "rx", "tx"; | |
3a462a62 | 311 | fsl,fifo-depth = <15>; |
b1d17f68 SG |
312 | status = "disabled"; |
313 | }; | |
314 | ||
315 | ssi2: ssi@0202c000 { | |
6ff7f51e | 316 | #sound-dai-cells = <0>; |
4c03527e | 317 | compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; |
b1d17f68 SG |
318 | reg = <0x0202c000 0x4000>; |
319 | interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; | |
320 | clocks = <&clks IMX6SX_CLK_SSI2_IPG>, | |
321 | <&clks IMX6SX_CLK_SSI2>; | |
322 | clock-names = "ipg", "baud"; | |
323 | dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; | |
324 | dma-names = "rx", "tx"; | |
3a462a62 | 325 | fsl,fifo-depth = <15>; |
b1d17f68 SG |
326 | status = "disabled"; |
327 | }; | |
328 | ||
329 | ssi3: ssi@02030000 { | |
6ff7f51e | 330 | #sound-dai-cells = <0>; |
4c03527e | 331 | compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; |
b1d17f68 SG |
332 | reg = <0x02030000 0x4000>; |
333 | interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; | |
334 | clocks = <&clks IMX6SX_CLK_SSI3_IPG>, | |
335 | <&clks IMX6SX_CLK_SSI3>; | |
336 | clock-names = "ipg", "baud"; | |
337 | dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; | |
338 | dma-names = "rx", "tx"; | |
3a462a62 | 339 | fsl,fifo-depth = <15>; |
b1d17f68 SG |
340 | status = "disabled"; |
341 | }; | |
342 | ||
343 | asrc: asrc@02034000 { | |
344 | reg = <0x02034000 0x4000>; | |
345 | interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; | |
346 | clocks = <&clks IMX6SX_CLK_ASRC_MEM>, | |
347 | <&clks IMX6SX_CLK_ASRC_IPG>, | |
348 | <&clks IMX6SX_CLK_SPDIF>, | |
349 | <&clks IMX6SX_CLK_SPBA>; | |
350 | clock-names = "mem", "ipg", "asrck", "dma"; | |
351 | dmas = <&sdma 17 20 1>, <&sdma 18 20 1>, | |
352 | <&sdma 19 20 1>, <&sdma 20 20 1>, | |
353 | <&sdma 21 20 1>, <&sdma 22 20 1>; | |
354 | dma-names = "rxa", "rxb", "rxc", | |
355 | "txa", "txb", "txc"; | |
356 | status = "okay"; | |
357 | }; | |
358 | }; | |
359 | ||
360 | pwm1: pwm@02080000 { | |
361 | compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; | |
362 | reg = <0x02080000 0x4000>; | |
363 | interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; | |
364 | clocks = <&clks IMX6SX_CLK_PWM1>, | |
365 | <&clks IMX6SX_CLK_PWM1>; | |
366 | clock-names = "ipg", "per"; | |
367 | #pwm-cells = <2>; | |
368 | }; | |
369 | ||
370 | pwm2: pwm@02084000 { | |
371 | compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; | |
372 | reg = <0x02084000 0x4000>; | |
373 | interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; | |
374 | clocks = <&clks IMX6SX_CLK_PWM2>, | |
375 | <&clks IMX6SX_CLK_PWM2>; | |
376 | clock-names = "ipg", "per"; | |
377 | #pwm-cells = <2>; | |
378 | }; | |
379 | ||
380 | pwm3: pwm@02088000 { | |
381 | compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; | |
382 | reg = <0x02088000 0x4000>; | |
383 | interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; | |
384 | clocks = <&clks IMX6SX_CLK_PWM3>, | |
385 | <&clks IMX6SX_CLK_PWM3>; | |
386 | clock-names = "ipg", "per"; | |
387 | #pwm-cells = <2>; | |
388 | }; | |
389 | ||
390 | pwm4: pwm@0208c000 { | |
391 | compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; | |
392 | reg = <0x0208c000 0x4000>; | |
393 | interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; | |
394 | clocks = <&clks IMX6SX_CLK_PWM4>, | |
395 | <&clks IMX6SX_CLK_PWM4>; | |
396 | clock-names = "ipg", "per"; | |
397 | #pwm-cells = <2>; | |
398 | }; | |
399 | ||
400 | flexcan1: can@02090000 { | |
401 | compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; | |
402 | reg = <0x02090000 0x4000>; | |
403 | interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; | |
404 | clocks = <&clks IMX6SX_CLK_CAN1_IPG>, | |
405 | <&clks IMX6SX_CLK_CAN1_SERIAL>; | |
406 | clock-names = "ipg", "per"; | |
407 | status = "disabled"; | |
408 | }; | |
409 | ||
410 | flexcan2: can@02094000 { | |
411 | compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; | |
412 | reg = <0x02094000 0x4000>; | |
413 | interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; | |
414 | clocks = <&clks IMX6SX_CLK_CAN2_IPG>, | |
415 | <&clks IMX6SX_CLK_CAN2_SERIAL>; | |
416 | clock-names = "ipg", "per"; | |
417 | status = "disabled"; | |
418 | }; | |
419 | ||
420 | gpt: gpt@02098000 { | |
421 | compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt"; | |
422 | reg = <0x02098000 0x4000>; | |
423 | interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; | |
424 | clocks = <&clks IMX6SX_CLK_GPT_BUS>, | |
2b2244a3 | 425 | <&clks IMX6SX_CLK_GPT_3M>; |
b1d17f68 SG |
426 | clock-names = "ipg", "per"; |
427 | }; | |
428 | ||
429 | gpio1: gpio@0209c000 { | |
430 | compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; | |
431 | reg = <0x0209c000 0x4000>; | |
432 | interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, | |
433 | <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; | |
434 | gpio-controller; | |
435 | #gpio-cells = <2>; | |
436 | interrupt-controller; | |
437 | #interrupt-cells = <2>; | |
438 | }; | |
439 | ||
440 | gpio2: gpio@020a0000 { | |
441 | compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; | |
442 | reg = <0x020a0000 0x4000>; | |
443 | interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, | |
444 | <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; | |
445 | gpio-controller; | |
446 | #gpio-cells = <2>; | |
447 | interrupt-controller; | |
448 | #interrupt-cells = <2>; | |
449 | }; | |
450 | ||
451 | gpio3: gpio@020a4000 { | |
452 | compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; | |
453 | reg = <0x020a4000 0x4000>; | |
454 | interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, | |
455 | <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; | |
456 | gpio-controller; | |
457 | #gpio-cells = <2>; | |
458 | interrupt-controller; | |
459 | #interrupt-cells = <2>; | |
460 | }; | |
461 | ||
462 | gpio4: gpio@020a8000 { | |
463 | compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; | |
464 | reg = <0x020a8000 0x4000>; | |
465 | interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, | |
466 | <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; | |
467 | gpio-controller; | |
468 | #gpio-cells = <2>; | |
469 | interrupt-controller; | |
470 | #interrupt-cells = <2>; | |
471 | }; | |
472 | ||
473 | gpio5: gpio@020ac000 { | |
474 | compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; | |
475 | reg = <0x020ac000 0x4000>; | |
476 | interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, | |
477 | <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; | |
478 | gpio-controller; | |
479 | #gpio-cells = <2>; | |
480 | interrupt-controller; | |
481 | #interrupt-cells = <2>; | |
482 | }; | |
483 | ||
484 | gpio6: gpio@020b0000 { | |
485 | compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; | |
486 | reg = <0x020b0000 0x4000>; | |
487 | interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, | |
488 | <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; | |
489 | gpio-controller; | |
490 | #gpio-cells = <2>; | |
491 | interrupt-controller; | |
492 | #interrupt-cells = <2>; | |
493 | }; | |
494 | ||
495 | gpio7: gpio@020b4000 { | |
496 | compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; | |
497 | reg = <0x020b4000 0x4000>; | |
498 | interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, | |
499 | <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; | |
500 | gpio-controller; | |
501 | #gpio-cells = <2>; | |
502 | interrupt-controller; | |
503 | #interrupt-cells = <2>; | |
504 | }; | |
505 | ||
506 | kpp: kpp@020b8000 { | |
507 | compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; | |
508 | reg = <0x020b8000 0x4000>; | |
509 | interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; | |
510 | clocks = <&clks IMX6SX_CLK_DUMMY>; | |
511 | status = "disabled"; | |
512 | }; | |
513 | ||
514 | wdog1: wdog@020bc000 { | |
515 | compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; | |
516 | reg = <0x020bc000 0x4000>; | |
517 | interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; | |
518 | clocks = <&clks IMX6SX_CLK_DUMMY>; | |
519 | }; | |
520 | ||
521 | wdog2: wdog@020c0000 { | |
522 | compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; | |
523 | reg = <0x020c0000 0x4000>; | |
524 | interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; | |
525 | clocks = <&clks IMX6SX_CLK_DUMMY>; | |
526 | status = "disabled"; | |
527 | }; | |
528 | ||
529 | clks: ccm@020c4000 { | |
530 | compatible = "fsl,imx6sx-ccm"; | |
531 | reg = <0x020c4000 0x4000>; | |
532 | interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, | |
533 | <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; | |
534 | #clock-cells = <1>; | |
535 | clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; | |
536 | clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; | |
537 | }; | |
538 | ||
539 | anatop: anatop@020c8000 { | |
540 | compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", | |
541 | "syscon", "simple-bus"; | |
542 | reg = <0x020c8000 0x1000>; | |
543 | interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, | |
544 | <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, | |
545 | <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; | |
546 | ||
547 | regulator-1p1@110 { | |
548 | compatible = "fsl,anatop-regulator"; | |
549 | regulator-name = "vdd1p1"; | |
550 | regulator-min-microvolt = <800000>; | |
551 | regulator-max-microvolt = <1375000>; | |
552 | regulator-always-on; | |
553 | anatop-reg-offset = <0x110>; | |
554 | anatop-vol-bit-shift = <8>; | |
555 | anatop-vol-bit-width = <5>; | |
556 | anatop-min-bit-val = <4>; | |
557 | anatop-min-voltage = <800000>; | |
558 | anatop-max-voltage = <1375000>; | |
559 | }; | |
560 | ||
561 | regulator-3p0@120 { | |
562 | compatible = "fsl,anatop-regulator"; | |
563 | regulator-name = "vdd3p0"; | |
564 | regulator-min-microvolt = <2800000>; | |
565 | regulator-max-microvolt = <3150000>; | |
566 | regulator-always-on; | |
567 | anatop-reg-offset = <0x120>; | |
568 | anatop-vol-bit-shift = <8>; | |
569 | anatop-vol-bit-width = <5>; | |
570 | anatop-min-bit-val = <0>; | |
571 | anatop-min-voltage = <2625000>; | |
572 | anatop-max-voltage = <3400000>; | |
573 | }; | |
574 | ||
575 | regulator-2p5@130 { | |
576 | compatible = "fsl,anatop-regulator"; | |
577 | regulator-name = "vdd2p5"; | |
578 | regulator-min-microvolt = <2100000>; | |
579 | regulator-max-microvolt = <2875000>; | |
580 | regulator-always-on; | |
581 | anatop-reg-offset = <0x130>; | |
582 | anatop-vol-bit-shift = <8>; | |
583 | anatop-vol-bit-width = <5>; | |
584 | anatop-min-bit-val = <0>; | |
585 | anatop-min-voltage = <2100000>; | |
586 | anatop-max-voltage = <2875000>; | |
587 | }; | |
588 | ||
589 | reg_arm: regulator-vddcore@140 { | |
590 | compatible = "fsl,anatop-regulator"; | |
f78a5975 | 591 | regulator-name = "vddarm"; |
b1d17f68 SG |
592 | regulator-min-microvolt = <725000>; |
593 | regulator-max-microvolt = <1450000>; | |
594 | regulator-always-on; | |
595 | anatop-reg-offset = <0x140>; | |
596 | anatop-vol-bit-shift = <0>; | |
597 | anatop-vol-bit-width = <5>; | |
598 | anatop-delay-reg-offset = <0x170>; | |
599 | anatop-delay-bit-shift = <24>; | |
600 | anatop-delay-bit-width = <2>; | |
601 | anatop-min-bit-val = <1>; | |
602 | anatop-min-voltage = <725000>; | |
603 | anatop-max-voltage = <1450000>; | |
604 | }; | |
605 | ||
606 | reg_pcie: regulator-vddpcie@140 { | |
607 | compatible = "fsl,anatop-regulator"; | |
608 | regulator-name = "vddpcie"; | |
609 | regulator-min-microvolt = <725000>; | |
610 | regulator-max-microvolt = <1450000>; | |
611 | anatop-reg-offset = <0x140>; | |
612 | anatop-vol-bit-shift = <9>; | |
613 | anatop-vol-bit-width = <5>; | |
614 | anatop-delay-reg-offset = <0x170>; | |
615 | anatop-delay-bit-shift = <26>; | |
616 | anatop-delay-bit-width = <2>; | |
617 | anatop-min-bit-val = <1>; | |
618 | anatop-min-voltage = <725000>; | |
619 | anatop-max-voltage = <1450000>; | |
620 | }; | |
621 | ||
622 | reg_soc: regulator-vddsoc@140 { | |
623 | compatible = "fsl,anatop-regulator"; | |
624 | regulator-name = "vddsoc"; | |
625 | regulator-min-microvolt = <725000>; | |
626 | regulator-max-microvolt = <1450000>; | |
627 | regulator-always-on; | |
628 | anatop-reg-offset = <0x140>; | |
629 | anatop-vol-bit-shift = <18>; | |
630 | anatop-vol-bit-width = <5>; | |
631 | anatop-delay-reg-offset = <0x170>; | |
632 | anatop-delay-bit-shift = <28>; | |
633 | anatop-delay-bit-width = <2>; | |
634 | anatop-min-bit-val = <1>; | |
635 | anatop-min-voltage = <725000>; | |
636 | anatop-max-voltage = <1450000>; | |
637 | }; | |
638 | }; | |
639 | ||
640 | tempmon: tempmon { | |
641 | compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; | |
642 | interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; | |
643 | fsl,tempmon = <&anatop>; | |
644 | fsl,tempmon-data = <&ocotp>; | |
645 | clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; | |
646 | }; | |
647 | ||
648 | usbphy1: usbphy@020c9000 { | |
649 | compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; | |
650 | reg = <0x020c9000 0x1000>; | |
651 | interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; | |
652 | clocks = <&clks IMX6SX_CLK_USBPHY1>; | |
653 | fsl,anatop = <&anatop>; | |
654 | }; | |
655 | ||
656 | usbphy2: usbphy@020ca000 { | |
657 | compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; | |
658 | reg = <0x020ca000 0x1000>; | |
659 | interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; | |
660 | clocks = <&clks IMX6SX_CLK_USBPHY2>; | |
661 | fsl,anatop = <&anatop>; | |
662 | }; | |
663 | ||
664 | snvs: snvs@020cc000 { | |
665 | compatible = "fsl,sec-v4.0-mon", "simple-bus"; | |
666 | #address-cells = <1>; | |
667 | #size-cells = <1>; | |
668 | ranges = <0 0x020cc000 0x4000>; | |
669 | ||
6f9dbfda | 670 | snvs_rtc: snvs-rtc-lp@34 { |
b1d17f68 SG |
671 | compatible = "fsl,sec-v4.0-mon-rtc-lp"; |
672 | reg = <0x34 0x58>; | |
673 | interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; | |
674 | }; | |
422b0676 RG |
675 | |
676 | snvs_poweroff: snvs-poweroff@38 { | |
677 | compatible = "fsl,sec-v4.0-poweroff"; | |
678 | reg = <0x38 0x4>; | |
679 | status = "disabled"; | |
680 | }; | |
b1d17f68 SG |
681 | }; |
682 | ||
683 | epit1: epit@020d0000 { | |
684 | reg = <0x020d0000 0x4000>; | |
685 | interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; | |
686 | }; | |
687 | ||
688 | epit2: epit@020d4000 { | |
689 | reg = <0x020d4000 0x4000>; | |
690 | interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; | |
691 | }; | |
692 | ||
693 | src: src@020d8000 { | |
694 | compatible = "fsl,imx6sx-src", "fsl,imx51-src"; | |
695 | reg = <0x020d8000 0x4000>; | |
696 | interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, | |
697 | <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; | |
698 | #reset-cells = <1>; | |
699 | }; | |
700 | ||
701 | gpc: gpc@020dc000 { | |
702 | compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; | |
703 | reg = <0x020dc000 0x4000>; | |
b923ff6a MZ |
704 | interrupt-controller; |
705 | #interrupt-cells = <3>; | |
b1d17f68 | 706 | interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
b923ff6a | 707 | interrupt-parent = <&intc>; |
b1d17f68 SG |
708 | }; |
709 | ||
710 | iomuxc: iomuxc@020e0000 { | |
711 | compatible = "fsl,imx6sx-iomuxc"; | |
712 | reg = <0x020e0000 0x4000>; | |
713 | }; | |
714 | ||
715 | gpr: iomuxc-gpr@020e4000 { | |
77e0d1cc AH |
716 | compatible = "fsl,imx6sx-iomuxc-gpr", |
717 | "fsl,imx6q-iomuxc-gpr", "syscon"; | |
b1d17f68 SG |
718 | reg = <0x020e4000 0x4000>; |
719 | }; | |
720 | ||
721 | sdma: sdma@020ec000 { | |
811e7685 | 722 | compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; |
b1d17f68 SG |
723 | reg = <0x020ec000 0x4000>; |
724 | interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; | |
725 | clocks = <&clks IMX6SX_CLK_SDMA>, | |
726 | <&clks IMX6SX_CLK_SDMA>; | |
727 | clock-names = "ipg", "ahb"; | |
728 | #dma-cells = <3>; | |
aeb88538 FE |
729 | /* imx6sx reuses imx6q sdma firmware */ |
730 | fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; | |
b1d17f68 SG |
731 | }; |
732 | }; | |
733 | ||
734 | aips2: aips-bus@02100000 { | |
735 | compatible = "fsl,aips-bus", "simple-bus"; | |
736 | #address-cells = <1>; | |
737 | #size-cells = <1>; | |
738 | reg = <0x02100000 0x100000>; | |
739 | ranges; | |
740 | ||
741 | usbotg1: usb@02184000 { | |
742 | compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; | |
743 | reg = <0x02184000 0x200>; | |
744 | interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; | |
745 | clocks = <&clks IMX6SX_CLK_USBOH3>; | |
746 | fsl,usbphy = <&usbphy1>; | |
747 | fsl,usbmisc = <&usbmisc 0>; | |
748 | fsl,anatop = <&anatop>; | |
749 | status = "disabled"; | |
750 | }; | |
751 | ||
752 | usbotg2: usb@02184200 { | |
753 | compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; | |
754 | reg = <0x02184200 0x200>; | |
755 | interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; | |
756 | clocks = <&clks IMX6SX_CLK_USBOH3>; | |
757 | fsl,usbphy = <&usbphy2>; | |
758 | fsl,usbmisc = <&usbmisc 1>; | |
759 | status = "disabled"; | |
760 | }; | |
761 | ||
762 | usbh: usb@02184400 { | |
763 | compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; | |
764 | reg = <0x02184400 0x200>; | |
765 | interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; | |
766 | clocks = <&clks IMX6SX_CLK_USBOH3>; | |
767 | fsl,usbmisc = <&usbmisc 2>; | |
768 | phy_type = "hsic"; | |
769 | fsl,anatop = <&anatop>; | |
3ec481ed | 770 | dr_mode = "host"; |
b1d17f68 SG |
771 | status = "disabled"; |
772 | }; | |
773 | ||
774 | usbmisc: usbmisc@02184800 { | |
775 | #index-cells = <1>; | |
b29f4fa1 | 776 | compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc"; |
b1d17f68 SG |
777 | reg = <0x02184800 0x200>; |
778 | clocks = <&clks IMX6SX_CLK_USBOH3>; | |
779 | }; | |
780 | ||
781 | fec1: ethernet@02188000 { | |
782 | compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; | |
783 | reg = <0x02188000 0x4000>; | |
784 | interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, | |
785 | <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; | |
786 | clocks = <&clks IMX6SX_CLK_ENET>, | |
787 | <&clks IMX6SX_CLK_ENET_AHB>, | |
788 | <&clks IMX6SX_CLK_ENET_PTP>, | |
789 | <&clks IMX6SX_CLK_ENET_REF>, | |
790 | <&clks IMX6SX_CLK_ENET_PTP>; | |
791 | clock-names = "ipg", "ahb", "ptp", | |
792 | "enet_clk_ref", "enet_out"; | |
0afdfe95 FL |
793 | fsl,num-tx-queues=<3>; |
794 | fsl,num-rx-queues=<3>; | |
b1d17f68 SG |
795 | status = "disabled"; |
796 | }; | |
797 | ||
798 | mlb: mlb@0218c000 { | |
799 | reg = <0x0218c000 0x4000>; | |
800 | interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, | |
801 | <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, | |
802 | <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; | |
803 | clocks = <&clks IMX6SX_CLK_MLB>; | |
804 | status = "disabled"; | |
805 | }; | |
806 | ||
807 | usdhc1: usdhc@02190000 { | |
808 | compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; | |
809 | reg = <0x02190000 0x4000>; | |
810 | interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; | |
811 | clocks = <&clks IMX6SX_CLK_USDHC1>, | |
812 | <&clks IMX6SX_CLK_USDHC1>, | |
813 | <&clks IMX6SX_CLK_USDHC1>; | |
814 | clock-names = "ipg", "ahb", "per"; | |
815 | bus-width = <4>; | |
816 | status = "disabled"; | |
817 | }; | |
818 | ||
819 | usdhc2: usdhc@02194000 { | |
820 | compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; | |
821 | reg = <0x02194000 0x4000>; | |
822 | interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; | |
823 | clocks = <&clks IMX6SX_CLK_USDHC2>, | |
824 | <&clks IMX6SX_CLK_USDHC2>, | |
825 | <&clks IMX6SX_CLK_USDHC2>; | |
826 | clock-names = "ipg", "ahb", "per"; | |
827 | bus-width = <4>; | |
828 | status = "disabled"; | |
829 | }; | |
830 | ||
831 | usdhc3: usdhc@02198000 { | |
832 | compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; | |
833 | reg = <0x02198000 0x4000>; | |
834 | interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; | |
835 | clocks = <&clks IMX6SX_CLK_USDHC3>, | |
836 | <&clks IMX6SX_CLK_USDHC3>, | |
837 | <&clks IMX6SX_CLK_USDHC3>; | |
838 | clock-names = "ipg", "ahb", "per"; | |
839 | bus-width = <4>; | |
840 | status = "disabled"; | |
841 | }; | |
842 | ||
843 | usdhc4: usdhc@0219c000 { | |
844 | compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; | |
845 | reg = <0x0219c000 0x4000>; | |
846 | interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; | |
847 | clocks = <&clks IMX6SX_CLK_USDHC4>, | |
848 | <&clks IMX6SX_CLK_USDHC4>, | |
849 | <&clks IMX6SX_CLK_USDHC4>; | |
850 | clock-names = "ipg", "ahb", "per"; | |
851 | bus-width = <4>; | |
852 | status = "disabled"; | |
853 | }; | |
854 | ||
855 | i2c1: i2c@021a0000 { | |
856 | #address-cells = <1>; | |
857 | #size-cells = <0>; | |
858 | compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; | |
859 | reg = <0x021a0000 0x4000>; | |
860 | interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; | |
861 | clocks = <&clks IMX6SX_CLK_I2C1>; | |
862 | status = "disabled"; | |
863 | }; | |
864 | ||
865 | i2c2: i2c@021a4000 { | |
866 | #address-cells = <1>; | |
867 | #size-cells = <0>; | |
868 | compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; | |
869 | reg = <0x021a4000 0x4000>; | |
870 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; | |
871 | clocks = <&clks IMX6SX_CLK_I2C2>; | |
872 | status = "disabled"; | |
873 | }; | |
874 | ||
875 | i2c3: i2c@021a8000 { | |
876 | #address-cells = <1>; | |
877 | #size-cells = <0>; | |
878 | compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; | |
879 | reg = <0x021a8000 0x4000>; | |
880 | interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; | |
881 | clocks = <&clks IMX6SX_CLK_I2C3>; | |
882 | status = "disabled"; | |
883 | }; | |
884 | ||
885 | mmdc: mmdc@021b0000 { | |
886 | compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; | |
887 | reg = <0x021b0000 0x4000>; | |
888 | }; | |
889 | ||
890 | fec2: ethernet@021b4000 { | |
9863aba5 | 891 | compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; |
b1d17f68 SG |
892 | reg = <0x021b4000 0x4000>; |
893 | interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, | |
894 | <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; | |
895 | clocks = <&clks IMX6SX_CLK_ENET>, | |
896 | <&clks IMX6SX_CLK_ENET_AHB>, | |
897 | <&clks IMX6SX_CLK_ENET_PTP>, | |
898 | <&clks IMX6SX_CLK_ENET2_REF_125M>, | |
899 | <&clks IMX6SX_CLK_ENET_PTP>; | |
900 | clock-names = "ipg", "ahb", "ptp", | |
901 | "enet_clk_ref", "enet_out"; | |
902 | status = "disabled"; | |
903 | }; | |
904 | ||
905 | weim: weim@021b8000 { | |
906 | compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; | |
907 | reg = <0x021b8000 0x4000>; | |
908 | interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; | |
909 | clocks = <&clks IMX6SX_CLK_EIM_SLOW>; | |
910 | }; | |
911 | ||
912 | ocotp: ocotp@021bc000 { | |
913 | compatible = "fsl,imx6sx-ocotp", "syscon"; | |
914 | reg = <0x021bc000 0x4000>; | |
915 | clocks = <&clks IMX6SX_CLK_OCOTP>; | |
916 | }; | |
917 | ||
918 | sai1: sai@021d4000 { | |
919 | compatible = "fsl,imx6sx-sai"; | |
920 | reg = <0x021d4000 0x4000>; | |
921 | interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; | |
922 | clocks = <&clks IMX6SX_CLK_SAI1_IPG>, | |
923 | <&clks IMX6SX_CLK_SAI1>, | |
924 | <&clks 0>, <&clks 0>; | |
925 | clock-names = "bus", "mclk1", "mclk2", "mclk3"; | |
926 | dma-names = "rx", "tx"; | |
927 | dmas = <&sdma 31 23 0>, <&sdma 32 23 0>; | |
928 | dma-source = <&gpr 0 15 0 16>; | |
929 | status = "disabled"; | |
930 | }; | |
931 | ||
932 | audmux: audmux@021d8000 { | |
933 | compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; | |
934 | reg = <0x021d8000 0x4000>; | |
935 | status = "disabled"; | |
936 | }; | |
937 | ||
938 | sai2: sai@021dc000 { | |
939 | compatible = "fsl,imx6sx-sai"; | |
940 | reg = <0x021dc000 0x4000>; | |
941 | interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; | |
942 | clocks = <&clks IMX6SX_CLK_SAI2_IPG>, | |
943 | <&clks IMX6SX_CLK_SAI2>, | |
944 | <&clks 0>, <&clks 0>; | |
945 | clock-names = "bus", "mclk1", "mclk2", "mclk3"; | |
946 | dma-names = "rx", "tx"; | |
947 | dmas = <&sdma 33 23 0>, <&sdma 34 23 0>; | |
948 | dma-source = <&gpr 0 17 0 18>; | |
949 | status = "disabled"; | |
950 | }; | |
951 | ||
952 | qspi1: qspi@021e0000 { | |
953 | #address-cells = <1>; | |
954 | #size-cells = <0>; | |
955 | compatible = "fsl,imx6sx-qspi"; | |
956 | reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; | |
957 | reg-names = "QuadSPI", "QuadSPI-memory"; | |
958 | interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; | |
959 | clocks = <&clks IMX6SX_CLK_QSPI1>, | |
960 | <&clks IMX6SX_CLK_QSPI1>; | |
961 | clock-names = "qspi_en", "qspi"; | |
962 | status = "disabled"; | |
963 | }; | |
964 | ||
965 | qspi2: qspi@021e4000 { | |
966 | #address-cells = <1>; | |
967 | #size-cells = <0>; | |
968 | compatible = "fsl,imx6sx-qspi"; | |
969 | reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>; | |
970 | reg-names = "QuadSPI", "QuadSPI-memory"; | |
971 | interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; | |
972 | clocks = <&clks IMX6SX_CLK_QSPI2>, | |
973 | <&clks IMX6SX_CLK_QSPI2>; | |
974 | clock-names = "qspi_en", "qspi"; | |
975 | status = "disabled"; | |
976 | }; | |
977 | ||
978 | uart2: serial@021e8000 { | |
979 | compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; | |
980 | reg = <0x021e8000 0x4000>; | |
981 | interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; | |
982 | clocks = <&clks IMX6SX_CLK_UART_IPG>, | |
983 | <&clks IMX6SX_CLK_UART_SERIAL>; | |
984 | clock-names = "ipg", "per"; | |
985 | dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; | |
986 | dma-names = "rx", "tx"; | |
987 | status = "disabled"; | |
988 | }; | |
989 | ||
990 | uart3: serial@021ec000 { | |
991 | compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; | |
992 | reg = <0x021ec000 0x4000>; | |
993 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; | |
994 | clocks = <&clks IMX6SX_CLK_UART_IPG>, | |
995 | <&clks IMX6SX_CLK_UART_SERIAL>; | |
996 | clock-names = "ipg", "per"; | |
997 | dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; | |
998 | dma-names = "rx", "tx"; | |
999 | status = "disabled"; | |
1000 | }; | |
1001 | ||
1002 | uart4: serial@021f0000 { | |
1003 | compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; | |
1004 | reg = <0x021f0000 0x4000>; | |
1005 | interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; | |
1006 | clocks = <&clks IMX6SX_CLK_UART_IPG>, | |
1007 | <&clks IMX6SX_CLK_UART_SERIAL>; | |
1008 | clock-names = "ipg", "per"; | |
1009 | dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; | |
1010 | dma-names = "rx", "tx"; | |
1011 | status = "disabled"; | |
1012 | }; | |
1013 | ||
1014 | uart5: serial@021f4000 { | |
1015 | compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; | |
1016 | reg = <0x021f4000 0x4000>; | |
1017 | interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; | |
1018 | clocks = <&clks IMX6SX_CLK_UART_IPG>, | |
1019 | <&clks IMX6SX_CLK_UART_SERIAL>; | |
1020 | clock-names = "ipg", "per"; | |
1021 | dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; | |
1022 | dma-names = "rx", "tx"; | |
1023 | status = "disabled"; | |
1024 | }; | |
1025 | ||
1026 | i2c4: i2c@021f8000 { | |
1027 | #address-cells = <1>; | |
1028 | #size-cells = <0>; | |
1029 | compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; | |
1030 | reg = <0x021f8000 0x4000>; | |
1031 | interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; | |
1032 | clocks = <&clks IMX6SX_CLK_I2C4>; | |
1033 | status = "disabled"; | |
1034 | }; | |
1035 | }; | |
1036 | ||
1037 | aips3: aips-bus@02200000 { | |
1038 | compatible = "fsl,aips-bus", "simple-bus"; | |
1039 | #address-cells = <1>; | |
1040 | #size-cells = <1>; | |
1041 | reg = <0x02200000 0x100000>; | |
1042 | ranges; | |
1043 | ||
1044 | spba-bus@02200000 { | |
1045 | compatible = "fsl,spba-bus", "simple-bus"; | |
1046 | #address-cells = <1>; | |
1047 | #size-cells = <1>; | |
1048 | reg = <0x02240000 0x40000>; | |
1049 | ranges; | |
1050 | ||
1051 | csi1: csi@02214000 { | |
1052 | reg = <0x02214000 0x4000>; | |
1053 | interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; | |
1054 | clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, | |
1055 | <&clks IMX6SX_CLK_CSI>, | |
1056 | <&clks IMX6SX_CLK_DCIC1>; | |
1057 | clock-names = "disp-axi", "csi_mclk", "dcic"; | |
1058 | status = "disabled"; | |
1059 | }; | |
1060 | ||
1061 | pxp: pxp@02218000 { | |
1062 | reg = <0x02218000 0x4000>; | |
1063 | interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; | |
1064 | clocks = <&clks IMX6SX_CLK_PXP_AXI>, | |
1065 | <&clks IMX6SX_CLK_DISPLAY_AXI>; | |
1066 | clock-names = "pxp-axi", "disp-axi"; | |
1067 | status = "disabled"; | |
1068 | }; | |
1069 | ||
1070 | csi2: csi@0221c000 { | |
1071 | reg = <0x0221c000 0x4000>; | |
1072 | interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; | |
1073 | clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, | |
1074 | <&clks IMX6SX_CLK_CSI>, | |
1075 | <&clks IMX6SX_CLK_DCIC2>; | |
1076 | clock-names = "disp-axi", "csi_mclk", "dcic"; | |
1077 | status = "disabled"; | |
1078 | }; | |
1079 | ||
1080 | lcdif1: lcdif@02220000 { | |
8c78c407 | 1081 | compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; |
b1d17f68 SG |
1082 | reg = <0x02220000 0x4000>; |
1083 | interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; | |
1084 | clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, | |
1085 | <&clks IMX6SX_CLK_LCDIF_APB>, | |
1086 | <&clks IMX6SX_CLK_DISPLAY_AXI>; | |
1087 | clock-names = "pix", "axi", "disp_axi"; | |
1088 | status = "disabled"; | |
1089 | }; | |
1090 | ||
1091 | lcdif2: lcdif@02224000 { | |
8c78c407 | 1092 | compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; |
b1d17f68 SG |
1093 | reg = <0x02224000 0x4000>; |
1094 | interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; | |
1095 | clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, | |
1096 | <&clks IMX6SX_CLK_LCDIF_APB>, | |
1097 | <&clks IMX6SX_CLK_DISPLAY_AXI>; | |
1098 | clock-names = "pix", "axi", "disp_axi"; | |
1099 | status = "disabled"; | |
1100 | }; | |
1101 | ||
1102 | vadc: vadc@02228000 { | |
1103 | reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; | |
1104 | reg-names = "vadc-vafe", "vadc-vdec"; | |
1105 | clocks = <&clks IMX6SX_CLK_VADC>, | |
1106 | <&clks IMX6SX_CLK_CSI>; | |
1107 | clock-names = "vadc", "csi"; | |
1108 | status = "disabled"; | |
1109 | }; | |
1110 | }; | |
1111 | ||
1112 | adc1: adc@02280000 { | |
1113 | compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; | |
1114 | reg = <0x02280000 0x4000>; | |
1115 | interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; | |
1116 | clocks = <&clks IMX6SX_CLK_IPG>; | |
1117 | clock-names = "adc"; | |
1118 | status = "disabled"; | |
1119 | }; | |
1120 | ||
1121 | adc2: adc@02284000 { | |
1122 | compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; | |
1123 | reg = <0x02284000 0x4000>; | |
1124 | interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; | |
1125 | clocks = <&clks IMX6SX_CLK_IPG>; | |
1126 | clock-names = "adc"; | |
1127 | status = "disabled"; | |
1128 | }; | |
1129 | ||
1130 | wdog3: wdog@02288000 { | |
1131 | compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; | |
1132 | reg = <0x02288000 0x4000>; | |
1133 | interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; | |
1134 | clocks = <&clks IMX6SX_CLK_DUMMY>; | |
1135 | status = "disabled"; | |
1136 | }; | |
1137 | ||
1138 | ecspi5: ecspi@0228c000 { | |
1139 | #address-cells = <1>; | |
1140 | #size-cells = <0>; | |
1141 | compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; | |
1142 | reg = <0x0228c000 0x4000>; | |
1143 | interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; | |
1144 | clocks = <&clks IMX6SX_CLK_ECSPI5>, | |
1145 | <&clks IMX6SX_CLK_ECSPI5>; | |
1146 | clock-names = "ipg", "per"; | |
1147 | status = "disabled"; | |
1148 | }; | |
1149 | ||
1150 | uart6: serial@022a0000 { | |
1151 | compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; | |
1152 | reg = <0x022a0000 0x4000>; | |
1153 | interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; | |
1154 | clocks = <&clks IMX6SX_CLK_UART_IPG>, | |
1155 | <&clks IMX6SX_CLK_UART_SERIAL>; | |
1156 | clock-names = "ipg", "per"; | |
1157 | dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; | |
1158 | dma-names = "rx", "tx"; | |
1159 | status = "disabled"; | |
1160 | }; | |
1161 | ||
1162 | pwm5: pwm@022a4000 { | |
1163 | compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; | |
1164 | reg = <0x022a4000 0x4000>; | |
1165 | interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; | |
1166 | clocks = <&clks IMX6SX_CLK_PWM5>, | |
1167 | <&clks IMX6SX_CLK_PWM5>; | |
1168 | clock-names = "ipg", "per"; | |
1169 | #pwm-cells = <2>; | |
1170 | }; | |
1171 | ||
1172 | pwm6: pwm@022a8000 { | |
1173 | compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; | |
1174 | reg = <0x022a8000 0x4000>; | |
1175 | interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; | |
1176 | clocks = <&clks IMX6SX_CLK_PWM6>, | |
1177 | <&clks IMX6SX_CLK_PWM6>; | |
1178 | clock-names = "ipg", "per"; | |
1179 | #pwm-cells = <2>; | |
1180 | }; | |
1181 | ||
1182 | pwm7: pwm@022ac000 { | |
1183 | compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; | |
1184 | reg = <0x022ac000 0x4000>; | |
1185 | interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; | |
1186 | clocks = <&clks IMX6SX_CLK_PWM7>, | |
1187 | <&clks IMX6SX_CLK_PWM7>; | |
1188 | clock-names = "ipg", "per"; | |
1189 | #pwm-cells = <2>; | |
1190 | }; | |
1191 | ||
1192 | pwm8: pwm@0022b0000 { | |
1193 | compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; | |
1194 | reg = <0x0022b0000 0x4000>; | |
1195 | interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; | |
1196 | clocks = <&clks IMX6SX_CLK_PWM8>, | |
1197 | <&clks IMX6SX_CLK_PWM8>; | |
1198 | clock-names = "ipg", "per"; | |
1199 | #pwm-cells = <2>; | |
1200 | }; | |
1201 | }; | |
1202 | ||
1203 | pcie: pcie@0x08000000 { | |
1204 | compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; | |
1205 | reg = <0x08ffc000 0x4000>; /* DBI */ | |
1206 | #address-cells = <3>; | |
1207 | #size-cells = <2>; | |
1208 | device_type = "pci"; | |
1209 | /* configuration space */ | |
1210 | ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000 | |
1211 | /* downstream I/O */ | |
1212 | 0x81000000 0 0 0x08f80000 0 0x00010000 | |
1213 | /* non-prefetchable memory */ | |
1214 | 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; | |
1215 | num-lanes = <1>; | |
1216 | interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; | |
1217 | clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>, | |
1218 | <&clks IMX6SX_CLK_PCIE_AXI>, | |
1219 | <&clks IMX6SX_CLK_LVDS1_OUT>, | |
1220 | <&clks IMX6SX_CLK_DISPLAY_AXI>; | |
1221 | clock-names = "pcie_ref_125m", "pcie_axi", | |
1222 | "lvds_gate", "display_axi"; | |
1223 | status = "disabled"; | |
1224 | }; | |
1225 | }; | |
1226 | }; |