]>
Commit | Line | Data |
---|---|---|
2f865c35 SH |
1 | /dts-v1/; |
2 | ||
0ab6129c EG |
3 | #include "kirkwood.dtsi" |
4 | #include "kirkwood-6281.dtsi" | |
2f865c35 SH |
5 | |
6 | / { | |
7 | model = "Seagate FreeAgent Dockstar"; | |
8 | compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; | |
9 | ||
10 | memory { | |
11 | device_type = "memory"; | |
12 | reg = <0x00000000 0x8000000>; | |
13 | }; | |
14 | ||
15 | chosen { | |
16 | bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; | |
17 | }; | |
18 | ||
19 | ocp@f1000000 { | |
1bf370a8 | 20 | pinctrl: pinctrl@10000 { |
1bf370a8 AL |
21 | pmx_usb_power_enable: pmx-usb-power-enable { |
22 | marvell,pins = "mpp29"; | |
23 | marvell,function = "gpio"; | |
24 | }; | |
25 | pmx_led_green: pmx-led-green { | |
26 | marvell,pins = "mpp46"; | |
27 | marvell,function = "gpio"; | |
28 | }; | |
29 | pmx_led_orange: pmx-led-orange { | |
30 | marvell,pins = "mpp47"; | |
31 | marvell,function = "gpio"; | |
32 | }; | |
33 | }; | |
2f865c35 | 34 | serial@12000 { |
2f865c35 SH |
35 | status = "ok"; |
36 | }; | |
37 | ||
38 | nand@3000000 { | |
39 | status = "okay"; | |
40 | ||
41 | partition@0 { | |
42 | label = "u-boot"; | |
43 | reg = <0x0000000 0x100000>; | |
44 | read-only; | |
45 | }; | |
46 | ||
47 | partition@100000 { | |
48 | label = "uImage"; | |
49 | reg = <0x0100000 0x400000>; | |
50 | }; | |
51 | ||
52 | partition@500000 { | |
53 | label = "data"; | |
54 | reg = <0x0500000 0xfb00000>; | |
55 | }; | |
56 | }; | |
57 | }; | |
58 | gpio-leds { | |
59 | compatible = "gpio-leds"; | |
2d743922 TP |
60 | pinctrl-0 = <&pmx_led_green &pmx_led_orange>; |
61 | pinctrl-names = "default"; | |
2f865c35 SH |
62 | |
63 | health { | |
64 | label = "status:green:health"; | |
65 | gpios = <&gpio1 14 1>; | |
66 | linux,default-trigger = "default-on"; | |
67 | }; | |
68 | fault { | |
69 | label = "status:orange:fault"; | |
70 | gpios = <&gpio1 15 1>; | |
71 | }; | |
72 | }; | |
c3ff813a AL |
73 | regulators { |
74 | compatible = "simple-bus"; | |
75 | #address-cells = <1>; | |
76 | #size-cells = <0>; | |
2d743922 TP |
77 | pinctrl-0 = <&pmx_usb_power_enable>; |
78 | pinctrl-names = "default"; | |
c3ff813a AL |
79 | |
80 | usb_power: regulator@1 { | |
81 | compatible = "regulator-fixed"; | |
82 | reg = <1>; | |
83 | regulator-name = "USB Power"; | |
84 | regulator-min-microvolt = <5000000>; | |
85 | regulator-max-microvolt = <5000000>; | |
86 | enable-active-high; | |
87 | regulator-always-on; | |
88 | regulator-boot-on; | |
89 | gpio = <&gpio0 29 0>; | |
90 | }; | |
91 | }; | |
2f865c35 | 92 | }; |
876e2333 SH |
93 | |
94 | &mdio { | |
95 | status = "okay"; | |
96 | ||
97 | ethphy0: ethernet-phy@0 { | |
98 | device_type = "ethernet-phy"; | |
99 | compatible = "marvell,88e1116"; | |
100 | reg = <0>; | |
101 | }; | |
102 | }; | |
103 | ||
104 | ð0 { | |
105 | status = "okay"; | |
106 | ethernet0-port@0 { | |
107 | phy-handle = <ðphy0>; | |
108 | }; | |
109 | }; |