[mirror_ubuntu-bionic-kernel.git] / arch / arm / boot / dts / kirkwood-goflexnet.dts

/dts-v1/;

#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"

/ {
	model = "Seagate GoFlex Net";
	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";

	memory {
		device_type = "memory";
		reg = <0x00000000 0x8000000>;
	};

	chosen {
		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
		stdout-path = &uart0;
	};

	ocp@f1000000 {
		pinctrl: pin-controller@10000 {
			pmx_usb_power_enable: pmx-usb-power-enable {
				marvell,pins = "mpp29";
				marvell,function = "gpio";
			};
			pmx_led_right_cap_0: pmx-led_right_cap_0 {
				marvell,pins = "mpp38";
				marvell,function = "gpio";
			};
			pmx_led_right_cap_1: pmx-led_right_cap_1 {
				marvell,pins = "mpp39";
				marvell,function = "gpio";
			};
			pmx_led_right_cap_2: pmx-led_right_cap_2 {
				marvell,pins = "mpp40";
				marvell,function = "gpio";
			};
			pmx_led_right_cap_3: pmx-led_right_cap_3 {
				marvell,pins = "mpp41";
				marvell,function = "gpio";
			};
			pmx_led_left_cap_0: pmx-led_left_cap_0 {
				marvell,pins = "mpp42";
				marvell,function = "gpio";
			};
			pmx_led_left_cap_1: pmx-led_left_cap_1 {
				marvell,pins = "mpp43";
				marvell,function = "gpio";
			};
			pmx_led_left_cap_2: pmx-led_left_cap_2 {
				marvell,pins = "mpp44";
				marvell,function = "gpio";
			};
			pmx_led_left_cap_3: pmx-led_left_cap_3 {
				marvell,pins = "mpp45";
				marvell,function = "gpio";
			};
			pmx_led_green: pmx-led_green {
				marvell,pins = "mpp46";
				marvell,function = "gpio";
			};
			pmx_led_orange: pmx-led_orange {
				marvell,pins = "mpp47";
				marvell,function = "gpio";
			};
		};
		serial@12000 {
			status = "ok";
		};

		sata@80000 {
			status = "okay";
			nr-ports = <2>;
		};

	};
	gpio-leds {
		compatible = "gpio-leds";
		pinctrl-0 = < &pmx_led_orange
			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
			    >;
		pinctrl-names = "default";

		health {
			label = "status:green:health";
			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};
		fault {
			label = "status:orange:fault";
			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
		};
		left0 {
			label = "status:white:left0";
			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
		};
		left1 {
			label = "status:white:left1";
			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
		};
		left2 {
			label = "status:white:left2";
			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
		};
		left3 {
			label = "status:white:left3";
			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
		};
		right0 {
			label = "status:white:right0";
			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
		};
		right1 {
			label = "status:white:right1";
			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
		};
		right2 {
			label = "status:white:right2";
			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
		};
		right3 {
			label = "status:white:right3";
			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
		};
	};
	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&pmx_usb_power_enable>;
		pinctrl-names = "default";

		usb_power: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "USB Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
		};
	};
};

&nand {
	chip-delay = <40>;
	status = "okay";

	partition@0 {
		label = "u-boot";
		reg = <0x0000000 0x100000>;
		read-only;
	};

	partition@100000 {
		label = "uImage";
		reg = <0x0100000 0x400000>;
	};

	partition@500000 {
		label = "pogoplug";
		reg = <0x0500000 0x2000000>;
	};

	partition@2500000 {
		label = "root";
		reg = <0x02500000 0xd800000>;
	};
};

&mdio {
	status = "okay";

	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&eth0 {
	status = "okay";
	ethernet0-port@0 {
		phy-handle = <&ethphy0>;
	};
};
Commit	Line	Data
5136b2aa JC	1	/dts-v1/;
5136b2aa JC	2
0ab6129c EG	3	#include "kirkwood.dtsi"
0ab6129c EG	4	#include "kirkwood-6281.dtsi"
5136b2aa JC	5
	6	/ {
	7	model = "Seagate GoFlex Net";
f39c1101	8	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
5136b2aa JC	9
	10	memory {
	11	device_type = "memory";
	12	reg = <0x00000000 0x8000000>;
	13	};
	14
	15	chosen {
	16	bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
ab833614	17	stdout-path = &uart0;
5136b2aa JC	18	};
	19
	20	ocp@f1000000 {
a9483969	21	pinctrl: pin-controller@10000 {
5d183ef9 AL	22	pmx_usb_power_enable: pmx-usb-power-enable {
	23	marvell,pins = "mpp29";
	24	marvell,function = "gpio";
	25	};
	26	pmx_led_right_cap_0: pmx-led_right_cap_0 {
	27	marvell,pins = "mpp38";
	28	marvell,function = "gpio";
	29	};
	30	pmx_led_right_cap_1: pmx-led_right_cap_1 {
	31	marvell,pins = "mpp39";
	32	marvell,function = "gpio";
	33	};
	34	pmx_led_right_cap_2: pmx-led_right_cap_2 {
	35	marvell,pins = "mpp40";
	36	marvell,function = "gpio";
	37	};
	38	pmx_led_right_cap_3: pmx-led_right_cap_3 {
	39	marvell,pins = "mpp41";
	40	marvell,function = "gpio";
	41	};
	42	pmx_led_left_cap_0: pmx-led_left_cap_0 {
	43	marvell,pins = "mpp42";
	44	marvell,function = "gpio";
	45	};
	46	pmx_led_left_cap_1: pmx-led_left_cap_1 {
	47	marvell,pins = "mpp43";
	48	marvell,function = "gpio";
	49	};
	50	pmx_led_left_cap_2: pmx-led_left_cap_2 {
	51	marvell,pins = "mpp44";
	52	marvell,function = "gpio";
	53	};
	54	pmx_led_left_cap_3: pmx-led_left_cap_3 {
	55	marvell,pins = "mpp45";
	56	marvell,function = "gpio";
	57	};
	58	pmx_led_green: pmx-led_green {
	59	marvell,pins = "mpp46";
	60	marvell,function = "gpio";
	61	};
	62	pmx_led_orange: pmx-led_orange {
	63	marvell,pins = "mpp47";
	64	marvell,function = "gpio";
	65	};
	66	};
5136b2aa	67	serial@12000 {
5136b2aa JC	68	status = "ok";
	69	};
	70
f3af1c73 AL	71	sata@80000 {
	72	status = "okay";
	73	nr-ports = <2>;
	74	};
	75
	76	};
	77	gpio-leds {
	78	compatible = "gpio-leds";
7cfbb287 TP	79	pinctrl-0 = < &pmx_led_orange
	80	&pmx_led_left_cap_0 &pmx_led_left_cap_1
	81	&pmx_led_left_cap_2 &pmx_led_left_cap_3
	82	&pmx_led_right_cap_0 &pmx_led_right_cap_1
	83	&pmx_led_right_cap_2 &pmx_led_right_cap_3
	84	>;
	85	pinctrl-names = "default";
f3af1c73 AL	86
	87	health {
	88	label = "status:green:health";
3a31f2d7	89	gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
dcdf14c7	90	default-state = "keep";
f3af1c73 AL	91	};
	92	fault {
	93	label = "status:orange:fault";
3a31f2d7	94	gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
f3af1c73 AL	95	};
	96	left0 {
	97	label = "status:white:left0";
3a31f2d7	98	gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	99	};
	100	left1 {
	101	label = "status:white:left1";
3a31f2d7	102	gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	103	};
	104	left2 {
	105	label = "status:white:left2";
3a31f2d7	106	gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	107	};
	108	left3 {
	109	label = "status:white:left3";
3a31f2d7	110	gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	111	};
	112	right0 {
	113	label = "status:white:right0";
3a31f2d7	114	gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	115	};
	116	right1 {
	117	label = "status:white:right1";
3a31f2d7	118	gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	119	};
	120	right2 {
	121	label = "status:white:right2";
3a31f2d7	122	gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
f3af1c73 AL	123	};
	124	right3 {
	125	label = "status:white:right3";
3a31f2d7	126	gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
f3af1c73	127	};
5136b2aa	128	};
280b348d AL	129	regulators {
	130	compatible = "simple-bus";
	131	#address-cells = <1>;
	132	#size-cells = <0>;
7cfbb287 TP	133	pinctrl-0 = <&pmx_usb_power_enable>;
7cfbb287 TP	134	pinctrl-names = "default";
280b348d AL	135
	136	usb_power: regulator@1 {
	137	compatible = "regulator-fixed";
	138	reg = <1>;
	139	regulator-name = "USB Power";
	140	regulator-min-microvolt = <5000000>;
	141	regulator-max-microvolt = <5000000>;
	142	enable-active-high;
	143	regulator-always-on;
	144	regulator-boot-on;
3a31f2d7	145	gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
280b348d AL	146	};
280b348d AL	147	};
5136b2aa	148	};
876e2333	149
7045ff5a JG	150	&nand {
	151	chip-delay = <40>;
	152	status = "okay";
	153
	154	partition@0 {
	155	label = "u-boot";
	156	reg = <0x0000000 0x100000>;
	157	read-only;
	158	};
	159
	160	partition@100000 {
	161	label = "uImage";
	162	reg = <0x0100000 0x400000>;
	163	};
	164
	165	partition@500000 {
	166	label = "pogoplug";
	167	reg = <0x0500000 0x2000000>;
	168	};
	169
	170	partition@2500000 {
	171	label = "root";
	172	reg = <0x02500000 0xd800000>;
	173	};
	174	};
	175
876e2333 SH	176	&mdio {
	177	status = "okay";
	178
	179	ethphy0: ethernet-phy@0 {
876e2333 SH	180	reg = <0>;
	181	};
	182	};
	183
	184	&eth0 {
	185	status = "okay";
	186	ethernet0-port@0 {
	187	phy-handle = <&ethphy0>;
	188	};
	189	};