[mirror_ubuntu-hirsute-kernel.git] / arch / arm / boot / dts / kirkwood-rd88f6281.dtsi

/*
 * Marvell RD88F6181 Common Board descrition
 *
 * Andrew Lunn <andrew@lunn.ch>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 *
 * This file contains the definitions that are common between the two
 * variants of the Marvell Kirkwood Development Board.
 */

#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"

/ {
	memory {
		device_type = "memory";
		reg = <0x00000000 0x20000000>;
	};

	chosen {
		bootargs = "console=ttyS0,115200n8";
	};

	mbus {
		pcie-controller {
			status = "okay";

			pcie@1,0 {
				status = "okay";
			};
		};
	};

	ocp@f1000000 {
		pinctrl: pinctrl@10000 {
			pinctrl-0 = <&pmx_sdio_cd>;
			pinctrl-names = "default";

			pmx_sdio_cd: pmx-sdio-cd {
				marvell,pins = "mpp28";
				marvell,function = "gpio";
			};
		};

		serial@12000 {
			status = "okay";

		};

		sata@80000 {
			status = "okay";
			nr-ports = <2>;
		};
		mvsdio@90000 {
			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
			pinctrl-names = "default";
			status = "okay";
			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
			/* No WP GPIO */
		};
	};

	dsa@0 {
		compatible = "marvell,dsa";
		#address-cells = <2>;
		#size-cells = <0>;

		dsa,ethernet = <&eth0>;
		dsa,mii-bus = <&ethphy1>;

		switch@0 {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				label = "lan1";
			};

			port@1 {
				reg = <1>;
				label = "lan2";
			};

			port@2 {
				reg = <2>;
				label = "lan3";
			};

			port@3 {
				reg = <3>;
				label = "lan4";
			};

			port@5 {
				reg = <5>;
				label = "cpu";
			};
		};
       };
};

&nand {
	status = "okay";

	partition@0 {
		label = "u-boot";
		reg = <0x0000000 0x100000>;
		read-only;
	};

	partition@100000 {
		label = "uImage";
		reg = <0x0100000 0x200000>;
	};

	partition@300000 {
		label = "data";
		reg = <0x0300000 0x500000>;
	};
};

&mdio {
	status = "okay";

	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};

	ethphy1: ethernet-phy@ff {
		reg = <0xff>; /* No PHY attached */
		speed = <1000>;
		duple = <1>;
	};
};

&eth0 {
	status = "okay";
	ethernet0-port@0 {
		phy-handle = <&ethphy0>;
	};
};

&eth1 {
	status = "okay";
	ethernet1-port@0 {
		phy-handle = <&ethphy1>;
	};
};
Commit	Line	Data
e2eaa339 AL	1	/*
	2	* Marvell RD88F6181 Common Board descrition
	3	*
	4	* Andrew Lunn <andrew@lunn.ch>
	5	*
	6	* This file is licensed under the terms of the GNU General Public
	7	* License version 2. This program is licensed "as is" without any
	8	* warranty of any kind, whether express or implied.
	9	*
	10	* This file contains the definitions that are common between the two
	11	* variants of the Marvell Kirkwood Development Board.
	12	*/
	13
	14	#include "kirkwood.dtsi"
	15	#include "kirkwood-6281.dtsi"
	16
	17	/ {
	18	memory {
	19	device_type = "memory";
	20	reg = <0x00000000 0x20000000>;
	21	};
	22
	23	chosen {
	24	bootargs = "console=ttyS0,115200n8";
	25	};
	26
	27	mbus {
	28	pcie-controller {
	29	status = "okay";
	30
	31	pcie@1,0 {
	32	status = "okay";
	33	};
	34	};
	35	};
	36
	37	ocp@f1000000 {
	38	pinctrl: pinctrl@10000 {
	39	pinctrl-0 = <&pmx_sdio_cd>;
	40	pinctrl-names = "default";
	41
	42	pmx_sdio_cd: pmx-sdio-cd {
	43	marvell,pins = "mpp28";
	44	marvell,function = "gpio";
	45	};
	46	};
	47
	48	serial@12000 {
	49	status = "okay";
	50
	51	};
	52
	53	sata@80000 {
	54	status = "okay";
	55	nr-ports = <2>;
	56	};
	57	mvsdio@90000 {
	58	pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
	59	pinctrl-names = "default";
	60	status = "okay";
	61	cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
	62	/* No WP GPIO */
	63	};
	64	};
65
66	dsa@0 {
67	compatible = "marvell,dsa";
68	#address-cells = <2>;
69	#size-cells = <0>;
70
71	dsa,ethernet = <&eth0>;
72	dsa,mii-bus = <&ethphy1>;
73
74	switch@0 {
75	#address-cells = <1>;
76	#size-cells = <0>;
77
78	port@0 {
79	reg = <0>;
80	label = "lan1";
81	};
82
83	port@1 {
84	reg = <1>;
85	label = "lan2";
86	};
87
88	port@2 {
89	reg = <2>;
90	label = "lan3";
91	};
92
93	port@3 {
94	reg = <3>;
95	label = "lan4";
96	};
97
98	port@5 {
99	reg = <5>;
100	label = "cpu";
101	};
102	};
103	};
104	};
105
106	&nand {
107	status = "okay";
108
109	partition@0 {
110	label = "u-boot";
111	reg = <0x0000000 0x100000>;
112	read-only;
113	};
114
115	partition@100000 {
116	label = "uImage";
117	reg = <0x0100000 0x200000>;
118	};
119
120	partition@300000 {
121	label = "data";
122	reg = <0x0300000 0x500000>;
123	};
124	};
125
126	&mdio {
127	status = "okay";
128
129	ethphy0: ethernet-phy@0 {
130	reg = <0>;
131	};
132
133	ethphy1: ethernet-phy@ff {
134	reg = <0xff>; /* No PHY attached */
135	speed = <1000>;
136	duple = <1>;
137	};
138	};
139
140	&eth0 {
141	status = "okay";
142	ethernet0-port@0 {
143	phy-handle = <&ethphy0>;
144	};
145	};
146
147	&eth1 {
148	status = "okay";
149	ethernet1-port@0 {
150	phy-handle = <&ethphy1>;
151	};
152	};