[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / kirkwood-ts419.dtsi

// SPDX-License-Identifier: GPL-2.0+
/*
 * Device Tree include file for QNAP TS41X
 *
 * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
 */

/ {
	model = "QNAP TS419 family";
	compatible = "qnap,ts419", "marvell,kirkwood";

	ocp@f1000000 {
		pinctrl: pin-controller@10000 {
			pinctrl-names = "default";

			pmx_USB_copy_button: pmx-USB-copy-button {
				marvell,pins = "mpp43";
				marvell,function = "gpio";
			};
			pmx_reset_button: pmx-reset-button {
				marvell,pins = "mpp37";
				marvell,function = "gpio";
			};
			/*
			 * JP1 indicates if an LCD module is installed
			 * on the serial port (0), or if the port is used
			 * as a console (1).
			 */
			pmx_jumper_jp1: pmx-jumper_jp1 {
				marvell,pins = "mpp45";
				marvell,function = "gpio";
			};

		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
		pinctrl-names = "default";

		copy {
			label = "USB Copy";
			linux,code = <KEY_COPY>;
			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
		};
		reset {
			label = "Reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
		};
	};
};

&mdio {
	status = "okay";

	ethphy1: ethernet-phy@1 {
		device_type = "ethernet-phy";
                /* overwrite reg property in board file */
	};
};

&eth1 {
	status = "okay";
	ethernet1-port@0 {
		phy-handle = <&ethphy1>;
	};
};
Commit	Line	Data
eb59e092	1	// SPDX-License-Identifier: GPL-2.0+
934b524b AL	2	/*
	3	* Device Tree include file for QNAP TS41X
	4	*
	5	* Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
934b524b AL	6	*/
	7
	8	/ {
	9	model = "QNAP TS419 family";
	10	compatible = "qnap,ts419", "marvell,kirkwood";
	11
	12	ocp@f1000000 {
a9483969	13	pinctrl: pin-controller@10000 {
934b524b AL	14	pinctrl-names = "default";
	15
	16	pmx_USB_copy_button: pmx-USB-copy-button {
	17	marvell,pins = "mpp43";
	18	marvell,function = "gpio";
	19	};
	20	pmx_reset_button: pmx-reset-button {
	21	marvell,pins = "mpp37";
	22	marvell,function = "gpio";
	23	};
	24	/*
	25	* JP1 indicates if an LCD module is installed
	26	* on the serial port (0), or if the port is used
	27	* as a console (1).
	28	*/
	29	pmx_jumper_jp1: pmx-jumper_jp1 {
	30	marvell,pins = "mpp45";
	31	marvell,function = "gpio";
	32	};
	33
	34	};
	35	};
	36
	37	gpio_keys {
	38	compatible = "gpio-keys";
	39	#address-cells = <1>;
	40	#size-cells = <0>;
	41	pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
	42	pinctrl-names = "default";
	43
395c755f	44	copy {
934b524b AL	45	label = "USB Copy";
	46	linux,code = <KEY_COPY>;
	47	gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
	48	};
395c755f	49	reset {
934b524b AL	50	label = "Reset";
	51	linux,code = <KEY_RESTART>;
	52	gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
	53	};
	54	};
	55	};
	56
	57	&mdio {
	58	status = "okay";
	59
	60	ethphy1: ethernet-phy@1 {
	61	device_type = "ethernet-phy";
	62	/* overwrite reg property in board file */
	63	};
	64	};
	65
	66	&eth1 {
	67	status = "okay";
	68	ethernet1-port@0 {
	69	phy-handle = <&ethphy1>;
	70	};
	71	};