]>
Commit | Line | Data |
---|---|---|
d2912cb1 | 1 | // SPDX-License-Identifier: GPL-2.0-only |
739f85bb AF |
2 | |
3 | / { | |
4 | gpio_keys { | |
5 | compatible = "gpio-keys"; | |
6 | pinctrl-names = "default"; | |
7 | pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; | |
8 | ||
9 | sysboot2 { | |
10 | label = "sysboot2"; | |
11 | gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ | |
12 | linux,code = <BTN_0>; | |
13 | wakeup-source; | |
14 | }; | |
15 | ||
16 | sysboot5 { | |
17 | label = "sysboot5"; | |
18 | gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ | |
19 | linux,code = <BTN_1>; | |
20 | wakeup-source; | |
21 | }; | |
22 | ||
23 | gpio1 { | |
24 | label = "gpio1"; | |
25 | gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ | |
26 | linux,code = <BTN_2>; | |
27 | wakeup-source; | |
28 | }; | |
29 | ||
30 | gpio2 { | |
31 | label = "gpio2"; | |
32 | gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ | |
33 | linux,code = <BTN_3>; | |
34 | wakeup-source; | |
35 | }; | |
36 | }; | |
37 | ||
38 | sound { | |
39 | compatible = "ti,omap-twl4030"; | |
40 | ti,model = "omap3logic"; | |
41 | ti,mcbsp = <&mcbsp2>; | |
42 | }; | |
43 | ||
44 | leds { | |
45 | compatible = "gpio-leds"; | |
46 | pinctrl-names = "default"; | |
47 | pinctrl-0 = <&led_pins>; | |
48 | ||
49 | led1 { | |
50 | label = "led1"; | |
51 | gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ | |
52 | linux,default-trigger = "cpu0"; | |
53 | }; | |
54 | ||
55 | led2 { | |
56 | label = "led2"; | |
57 | gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ | |
58 | linux,default-trigger = "none"; | |
59 | }; | |
60 | }; | |
61 | ||
62 | pwm10: dmtimer-pwm { | |
63 | compatible = "ti,omap-dmtimer-pwm"; | |
64 | pinctrl-names = "default"; | |
65 | pinctrl-0 = <&pwm_pins>; | |
66 | ti,timers = <&timer10>; | |
67 | #pwm-cells = <3>; | |
68 | }; | |
69 | ||
70 | }; | |
71 | ||
72 | &vaux1 { | |
73 | regulator-min-microvolt = <3000000>; | |
74 | regulator-max-microvolt = <3000000>; | |
75 | }; | |
76 | ||
77 | &vaux4 { | |
78 | regulator-min-microvolt = <1800000>; | |
79 | regulator-max-microvolt = <1800000>; | |
80 | }; | |
81 | ||
82 | &mcbsp2 { | |
83 | status = "okay"; | |
84 | }; | |
85 | ||
86 | &charger { | |
87 | ti,bb-uvolt = <3200000>; | |
88 | ti,bb-uamp = <150>; | |
89 | }; | |
90 | ||
91 | &gpmc { | |
92 | ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */ | |
93 | 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */ | |
94 | ||
95 | ethernet@gpmc { | |
96 | pinctrl-names = "default"; | |
97 | pinctrl-0 = <&lan9221_pins>; | |
98 | interrupt-parent = <&gpio5>; | |
99 | interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ | |
100 | reg = <1 0 0xff>; | |
101 | }; | |
102 | }; | |
103 | ||
104 | &vpll2 { | |
105 | regulator-always-on; | |
106 | }; | |
107 | ||
108 | &dss { | |
109 | status = "ok"; | |
110 | vdds_dsi-supply = <&vpll2>; | |
111 | vdda_video-supply = <&video_reg>; | |
112 | pinctrl-names = "default"; | |
113 | pinctrl-0 = <&dss_dpi_pins1>; | |
114 | port { | |
115 | dpi_out: endpoint { | |
116 | remote-endpoint = <&lcd_in>; | |
117 | data-lines = <16>; | |
118 | }; | |
119 | }; | |
120 | }; | |
121 | ||
122 | / { | |
123 | aliases { | |
124 | display0 = &lcd0; | |
125 | }; | |
126 | ||
127 | video_reg: video_reg { | |
128 | pinctrl-names = "default"; | |
129 | pinctrl-0 = <&panel_pwr_pins>; | |
130 | compatible = "regulator-fixed"; | |
131 | regulator-name = "fixed-supply"; | |
132 | regulator-min-microvolt = <3300000>; | |
133 | regulator-max-microvolt = <3300000>; | |
134 | gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ | |
135 | }; | |
136 | ||
137 | lcd0: display { | |
138 | compatible = "panel-dpi"; | |
139 | label = "15"; | |
140 | status = "okay"; | |
141 | /* default-on; */ | |
142 | pinctrl-names = "default"; | |
143 | ||
144 | port { | |
145 | lcd_in: endpoint { | |
146 | remote-endpoint = <&dpi_out>; | |
147 | }; | |
148 | }; | |
149 | ||
150 | panel-timing { | |
151 | clock-frequency = <9000000>; | |
152 | hactive = <480>; | |
153 | vactive = <272>; | |
154 | hfront-porch = <3>; | |
155 | hback-porch = <2>; | |
156 | hsync-len = <42>; | |
157 | vback-porch = <3>; | |
158 | vfront-porch = <4>; | |
159 | vsync-len = <11>; | |
160 | hsync-active = <0>; | |
161 | vsync-active = <0>; | |
162 | de-active = <1>; | |
163 | pixelclk-active = <1>; | |
164 | }; | |
165 | }; | |
166 | ||
167 | bl: backlight { | |
168 | compatible = "pwm-backlight"; | |
169 | pinctrl-names = "default"; | |
170 | pinctrl-0 = <&backlight_pins>; | |
171 | pwms = <&pwm10 0 5000000 0>; | |
172 | brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; | |
173 | default-brightness-level = <7>; | |
174 | enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */ | |
175 | }; | |
176 | }; | |
177 | ||
178 | &mmc1 { | |
179 | interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; | |
180 | pinctrl-names = "default"; | |
181 | pinctrl-0 = <&mmc1_pins &mmc1_cd>; | |
182 | cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */ | |
183 | vmmc-supply = <&vmmc1>; | |
184 | bus-width = <4>; | |
185 | cap-power-off-card; | |
186 | }; | |
187 | ||
188 | &omap3_pmx_core { | |
189 | gpio_key_pins: pinmux_gpio_key_pins { | |
190 | pinctrl-single,pins = < | |
191 | OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ | |
192 | OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ | |
193 | >; | |
194 | }; | |
195 | ||
196 | pwm_pins: pinmux_pwm_pins { | |
197 | pinctrl-single,pins = < | |
198 | OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */ | |
199 | >; | |
200 | }; | |
201 | ||
202 | led_pins: pinmux_led_pins { | |
203 | pinctrl-single,pins = < | |
204 | OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ | |
205 | OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ | |
206 | >; | |
207 | }; | |
208 | ||
209 | mmc1_pins: pinmux_mmc1_pins { | |
210 | pinctrl-single,pins = < | |
211 | OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ | |
212 | OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ | |
213 | OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ | |
214 | OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ | |
215 | OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ | |
216 | OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ | |
217 | >; | |
218 | }; | |
219 | ||
220 | tsc2004_pins: pinmux_tsc2004_pins { | |
221 | pinctrl-single,pins = < | |
222 | OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ | |
223 | >; | |
224 | }; | |
225 | ||
226 | backlight_pins: pinmux_backlight_pins { | |
227 | pinctrl-single,pins = < | |
228 | OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */ | |
229 | >; | |
230 | }; | |
231 | ||
232 | isp_pins: pinmux_isp_pins { | |
233 | pinctrl-single,pins = < | |
234 | OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */ | |
235 | OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */ | |
236 | OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ | |
237 | OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ | |
238 | ||
239 | OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ | |
240 | OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ | |
241 | OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ | |
242 | OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ | |
243 | OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ | |
244 | OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ | |
245 | OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */ | |
246 | OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */ | |
247 | >; | |
248 | }; | |
249 | ||
250 | panel_pwr_pins: pinmux_panel_pwr_pins { | |
251 | pinctrl-single,pins = < | |
252 | OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */ | |
253 | >; | |
254 | }; | |
255 | ||
256 | dss_dpi_pins1: pinmux_dss_dpi_pins1 { | |
257 | pinctrl-single,pins = < | |
258 | OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */ | |
259 | OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */ | |
260 | OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */ | |
261 | OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */ | |
262 | ||
263 | OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */ | |
264 | OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */ | |
265 | OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */ | |
266 | OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */ | |
267 | OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */ | |
268 | OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */ | |
269 | OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */ | |
270 | OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */ | |
271 | OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */ | |
272 | OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */ | |
273 | OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */ | |
274 | OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */ | |
275 | ||
276 | OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */ | |
277 | OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */ | |
278 | OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */ | |
279 | OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */ | |
280 | OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */ | |
281 | OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */ | |
282 | >; | |
283 | }; | |
284 | }; | |
285 | ||
286 | &omap3_pmx_wkup { | |
287 | gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { | |
288 | pinctrl-single,pins = < | |
289 | OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ | |
290 | OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ | |
291 | >; | |
292 | }; | |
293 | ||
294 | lan9221_pins: pinmux_lan9221_pins { | |
295 | pinctrl-single,pins = < | |
296 | OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ | |
297 | >; | |
298 | }; | |
299 | ||
300 | mmc1_cd: pinmux_mmc1_cd { | |
301 | pinctrl-single,pins = < | |
302 | OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ | |
303 | >; | |
304 | }; | |
305 | }; | |
306 | ||
307 | &i2c2 { | |
308 | mt9p031@48 { | |
309 | compatible = "aptina,mt9p031"; | |
310 | reg = <0x48>; | |
311 | clocks = <&isp 0>; | |
312 | vaa-supply = <&vaux4>; | |
313 | vdd-supply = <&vaux4>; | |
314 | vdd_io-supply = <&vaux4>; | |
315 | port { | |
316 | mt9p031_out: endpoint { | |
317 | input-clock-frequency = <24000000>; | |
318 | pixel-clock-frequency = <72000000>; | |
319 | remote-endpoint = <&ccdc_ep>; | |
320 | }; | |
321 | }; | |
322 | }; | |
323 | }; | |
324 | ||
325 | &i2c3 { | |
326 | touchscreen: tsc2004@48 { | |
327 | compatible = "ti,tsc2004"; | |
328 | reg = <0x48>; | |
329 | vio-supply = <&vaux1>; | |
330 | pinctrl-names = "default"; | |
331 | pinctrl-0 = <&tsc2004_pins>; | |
332 | interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */ | |
333 | ||
334 | touchscreen-fuzz-x = <4>; | |
335 | touchscreen-fuzz-y = <7>; | |
336 | touchscreen-fuzz-pressure = <2>; | |
337 | touchscreen-size-x = <4096>; | |
338 | touchscreen-size-y = <4096>; | |
339 | touchscreen-max-pressure = <2048>; | |
340 | ||
341 | ti,x-plate-ohms = <280>; | |
342 | ti,esd-recovery-timeout-ms = <8000>; | |
343 | }; | |
344 | }; | |
345 | ||
346 | &mcspi1 { | |
347 | at25@0 { | |
348 | compatible = "atmel,at25"; | |
349 | reg = <0>; | |
350 | spi-max-frequency = <5000000>; | |
351 | spi-cpha; | |
352 | spi-cpol; | |
353 | ||
354 | pagesize = <64>; | |
355 | size = <32768>; | |
356 | address-width = <16>; | |
357 | }; | |
358 | }; | |
359 | ||
360 | &isp { | |
361 | pinctrl-names = "default"; | |
362 | pinctrl-0 = <&isp_pins>; | |
363 | ports { | |
364 | port@0 { | |
365 | reg = <0>; | |
366 | ccdc_ep: endpoint { | |
367 | remote-endpoint = <&mt9p031_out>; | |
368 | bus-width = <8>; | |
369 | hsync-active = <1>; | |
370 | vsync-active = <1>; | |
371 | pclk-sample = <0>; | |
372 | }; | |
373 | }; | |
374 | }; | |
375 | }; | |
376 | ||
377 | &uart1 { | |
378 | interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; | |
379 | }; | |
380 | ||
381 | /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ | |
382 | &usb_otg_hs { | |
383 | pinctrl-names = "default"; | |
384 | pinctrl-0 = <&hsusb_otg_pins>; | |
385 | interface-type = <0>; | |
386 | usb-phy = <&usb2_phy>; | |
387 | phys = <&usb2_phy>; | |
388 | phy-names = "usb2-phy"; | |
389 | mode = <3>; | |
390 | power = <50>; | |
391 | }; |