[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / omap3-cm-t3x.dtsi

/*
 * Common support for CompuLab CM-T3x CoMs
 */

/ {

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>; /* 256 MB */
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&green_led_pins>;
		ledb {
			label = "cm-t3x:green";
			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
			linux,default-trigger = "heartbeat";
		};
	};

	/* HS USB Port 1 Power */
	hsusb1_power: hsusb1_power_reg {
		compatible = "regulator-fixed";
		regulator-name = "hsusb1_vbus";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <70000>;
	};

	/* HS USB Port 2 Power */
	hsusb2_power: hsusb2_power_reg {
		compatible = "regulator-fixed";
		regulator-name = "hsusb2_vbus";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <70000>;
	};

	/* HS USB Host PHY on PORT 1 */
	hsusb1_phy: hsusb1_phy {
		compatible = "usb-nop-xceiv";
		vcc-supply = <&hsusb1_power>;
	};

	/* HS USB Host PHY on PORT 2 */
	hsusb2_phy: hsusb2_phy {
		compatible = "usb-nop-xceiv";
		vcc-supply = <&hsusb2_power>;
	};

	ads7846reg: ads7846-reg {
		compatible = "regulator-fixed";
		regulator-name = "ads7846-reg";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	tv0: connector@1 {
		compatible = "svideo-connector";
		label = "tv";

		port {
			tv_connector_in: endpoint {
				remote-endpoint = <&venc_out>;
			};
		};
	};
};

&omap3_pmx_core {

	uart3_pins: pinmux_uart3_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
		>;
	};

	green_led_pins: pinmux_green_led_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
		>;
	};

	dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */

			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
		>;
	};

	dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
		>;
	};

	ads7846_pins: pinmux_ads7846_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
		>;
	};

	mcspi1_pins: pinmux_mcspi1_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk */
			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo */
			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi */
			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart3_pins>;
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	bus-width = <4>;
};

&mmc3 {
	status = "disabled";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <400000>;

	at24@50 {
		compatible = "at24,24c02";
		pagesize = <16>;
		reg = <0x50>;
	};
};

&i2c3 {
	clock-frequency = <400000>;
};

&usbhshost {
	port1-mode = "ehci-phy";
	port2-mode = "ehci-phy";
};

&usbhsehci {
	phys = <&hsusb1_phy &hsusb2_phy>;
};

&mcspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcspi1_pins>;

	/* touch controller */
	ads7846@0 {
		pinctrl-names = "default";
		pinctrl-0 = <&ads7846_pins>;

		compatible = "ti,ads7846";
		vcc-supply = <&ads7846reg>;

		reg = <0>;			/* CS0 */
		spi-max-frequency = <1500000>;

		interrupt-parent = <&gpio2>;
		interrupts = <25 0>;		/* gpio_57 */
		pendown-gpio = <&gpio2 25 0>;

		ti,x-min = /bits/ 16 <0x0>;
		ti,x-max = /bits/ 16 <0x0fff>;
		ti,y-min = /bits/ 16 <0x0>;
		ti,y-max = /bits/ 16 <0x0fff>;

		ti,x-plate-ohms = /bits/ 16 <180>;
		ti,pressure-max = /bits/ 16 <255>;

		ti,debounce-max = /bits/ 16 <30>;
		ti,debounce-tol = /bits/ 16 <10>;
		ti,debounce-rep = /bits/ 16 <1>;

		linux,wakeup;
	};
};

&venc {
	status = "ok";

	port {
		venc_out: endpoint {
			remote-endpoint = <&tv_connector_in>;
			ti,channels = <2>;
		};
	};
};
Commit	Line	Data
d234e423 DL	1	/*
	2	* Common support for CompuLab CM-T3x CoMs
	3	*/
	4
	5	/ {
	6
	7	memory {
	8	device_type = "memory";
	9	reg = <0x80000000 0x10000000>; /* 256 MB */
	10	};
	11
	12	leds {
	13	compatible = "gpio-leds";
dc897926 DL	14	pinctrl-names = "default";
dc897926 DL	15	pinctrl-0 = <&green_led_pins>;
d234e423 DL	16	ledb {
	17	label = "cm-t3x:green";
	18	gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
	19	linux,default-trigger = "heartbeat";
	20	};
	21	};
ce5abbb8 DL	22
	23	/* HS USB Port 1 Power */
	24	hsusb1_power: hsusb1_power_reg {
	25	compatible = "regulator-fixed";
	26	regulator-name = "hsusb1_vbus";
	27	regulator-min-microvolt = <3300000>;
	28	regulator-max-microvolt = <3300000>;
	29	startup-delay-us = <70000>;
	30	};
	31
	32	/* HS USB Port 2 Power */
	33	hsusb2_power: hsusb2_power_reg {
	34	compatible = "regulator-fixed";
	35	regulator-name = "hsusb2_vbus";
	36	regulator-min-microvolt = <3300000>;
	37	regulator-max-microvolt = <3300000>;
	38	startup-delay-us = <70000>;
	39	};
	40
	41	/* HS USB Host PHY on PORT 1 */
	42	hsusb1_phy: hsusb1_phy {
	43	compatible = "usb-nop-xceiv";
	44	vcc-supply = <&hsusb1_power>;
	45	};
	46
	47	/* HS USB Host PHY on PORT 2 */
	48	hsusb2_phy: hsusb2_phy {
	49	compatible = "usb-nop-xceiv";
	50	vcc-supply = <&hsusb2_power>;
	51	};
299e5515 DL	52
	53	ads7846reg: ads7846-reg {
	54	compatible = "regulator-fixed";
	55	regulator-name = "ads7846-reg";
	56	regulator-min-microvolt = <3300000>;
	57	regulator-max-microvolt = <3300000>;
	58	};
e6fb4272 DL	59
	60	tv0: connector@1 {
	61	compatible = "svideo-connector";
	62	label = "tv";
	63
	64	port {
	65	tv_connector_in: endpoint {
	66	remote-endpoint = <&venc_out>;
	67	};
	68	};
	69	};
d234e423 DL	70	};
	71
	72	&omap3_pmx_core {
	73
	74	uart3_pins: pinmux_uart3_pins {
	75	pinctrl-single,pins = <
	76	OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT \| MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
	77	OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT \| MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
	78	>;
	79	};
	80
	81	mmc1_pins: pinmux_mmc1_pins {
	82	pinctrl-single,pins = <
	83	OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
	84	OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
	85	OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
	86	OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
	87	OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
	88	OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
	89	>;
	90	};
dc897926 DL	91
	92	green_led_pins: pinmux_green_led_pins {
	93	pinctrl-single,pins = <
	94	OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT \| MUX_MODE4) /* sys_clkout2.gpio_186 */
	95	>;
	96	};
e5ee042b DL	97
	98	dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
	99	pinctrl-single,pins = <
	100	OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT \| MUX_MODE0) /* dss_pclk.dss_pclk */
	101	OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT \| MUX_MODE0) /* dss_hsync.dss_hsync */
	102	OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT \| MUX_MODE0) /* dss_vsync.dss_vsync */
	103	OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT \| MUX_MODE0) /* dss_acbias.dss_acbias */
	104
	105	OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT \| MUX_MODE0) /* dss_data6.dss_data6 */
	106	OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT \| MUX_MODE0) /* dss_data7.dss_data7 */
	107	OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT \| MUX_MODE0) /* dss_data8.dss_data8 */
	108	OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT \| MUX_MODE0) /* dss_data9.dss_data9 */
	109	OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT \| MUX_MODE0) /* dss_data10.dss_data10 */
	110	OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT \| MUX_MODE0) /* dss_data11.dss_data11 */
	111	OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT \| MUX_MODE0) /* dss_data12.dss_data12 */
	112	OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT \| MUX_MODE0) /* dss_data13.dss_data13 */
	113	OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT \| MUX_MODE0) /* dss_data14.dss_data14 */
	114	OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT \| MUX_MODE0) /* dss_data15.dss_data15 */
	115	OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT \| MUX_MODE0) /* dss_data16.dss_data16 */
	116	OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT \| MUX_MODE0) /* dss_data17.dss_data17 */
	117	OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT \| MUX_MODE0) /* dss_data18.dss_data18 */
	118	OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT \| MUX_MODE0) /* dss_data19.dss_data19 */
	119	OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT \| MUX_MODE0) /* dss_data20.dss_data20 */
	120	OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT \| MUX_MODE0) /* dss_data21.dss_data21 */
	121	OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT \| MUX_MODE0) /* dss_data22.dss_data22 */
	122	OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT \| MUX_MODE0) /* dss_data23.dss_data23 */
	123	>;
	124	};
	125
	126	dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
	127	pinctrl-single,pins = <
274ac841 DL	128	OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT \| MUX_MODE0) /* dss_data0.dss_data0 */
	129	OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT \| MUX_MODE0) /* dss_data1.dss_data1 */
	130	OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT \| MUX_MODE0) /* dss_data2.dss_data2 */
	131	OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT \| MUX_MODE0) /* dss_data3.dss_data3 */
	132	OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT \| MUX_MODE0) /* dss_data4.dss_data4 */
	133	OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT \| MUX_MODE0) /* dss_data5.dss_data5 */
e5ee042b DL	134	>;
e5ee042b DL	135	};
299e5515 DL	136
	137	ads7846_pins: pinmux_ads7846_pins {
	138	pinctrl-single,pins = <
	139	OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP \| MUX_MODE4) /* gpmc_ncs6.gpio_57 */
	140	>;
	141	};
	142
	143	mcspi1_pins: pinmux_mcspi1_pins {
	144	pinctrl-single,pins = <
	145	OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT \| MUX_MODE0) /* mcspi1_clk */
	146	OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT \| MUX_MODE0) /* mcspi1_simo */
	147	OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT \| MUX_MODE0) /* mcspi1_somi */
	148	OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* mcspi1_cs0 */
	149	>;
	150	};
b0f9ce4e DL	151
	152	i2c1_pins: pinmux_i2c1_pins {
	153	pinctrl-single,pins = <
	154	OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
	155	OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
	156	>;
	157	};
d234e423 DL	158	};
	159
	160	&uart3 {
	161	pinctrl-names = "default";
	162	pinctrl-0 = <&uart3_pins>;
	163	};
	164
	165	&mmc1 {
	166	pinctrl-names = "default";
	167	pinctrl-0 = <&mmc1_pins>;
	168	bus-width = <4>;
	169	};
	170
4ceb3936 DL	171	&mmc3 {
	172	status = "disabled";
	173	};
	174
d234e423	175	&i2c1 {
b0f9ce4e DL	176	pinctrl-names = "default";
	177	pinctrl-0 = <&i2c1_pins>;
	178
d234e423	179	clock-frequency = <400000>;
0cdb8255 DL	180
	181	at24@50 {
	182	compatible = "at24,24c02";
	183	pagesize = <16>;
	184	reg = <0x50>;
	185	};
d234e423 DL	186	};
	187
	188	&i2c3 {
	189	clock-frequency = <400000>;
	190	};
0cdb8255	191
ce5abbb8 DL	192	&usbhshost {
	193	port1-mode = "ehci-phy";
	194	port2-mode = "ehci-phy";
	195	};
	196
	197	&usbhsehci {
	198	phys = <&hsusb1_phy &hsusb2_phy>;
	199	};
299e5515 DL	200
	201	&mcspi1 {
	202	pinctrl-names = "default";
	203	pinctrl-0 = <&mcspi1_pins>;
	204
	205	/* touch controller */
	206	ads7846@0 {
	207	pinctrl-names = "default";
	208	pinctrl-0 = <&ads7846_pins>;
	209
	210	compatible = "ti,ads7846";
	211	vcc-supply = <&ads7846reg>;
	212
	213	reg = <0>; /* CS0 */
	214	spi-max-frequency = <1500000>;
	215
	216	interrupt-parent = <&gpio2>;
	217	interrupts = <25 0>; /* gpio_57 */
	218	pendown-gpio = <&gpio2 25 0>;
	219
	220	ti,x-min = /bits/ 16 <0x0>;
	221	ti,x-max = /bits/ 16 <0x0fff>;
	222	ti,y-min = /bits/ 16 <0x0>;
	223	ti,y-max = /bits/ 16 <0x0fff>;
	224
	225	ti,x-plate-ohms = /bits/ 16 <180>;
	226	ti,pressure-max = /bits/ 16 <255>;
	227
	228	ti,debounce-max = /bits/ 16 <30>;
	229	ti,debounce-tol = /bits/ 16 <10>;
	230	ti,debounce-rep = /bits/ 16 <1>;
	231
	232	linux,wakeup;
	233	};
	234	};
e6fb4272 DL	235
	236	&venc {
	237	status = "ok";
	238
	239	port {
	240	venc_out: endpoint {
	241	remote-endpoint = <&tv_connector_in>;
	242	ti,channels = <2>;
	243	};
	244	};
	245	};