[mirror_ubuntu-focal-kernel.git] / arch / arm / boot / dts / omap3-evm-common.dtsi

/*
 * Common support for omap3 EVM boards
 */

#include <dt-bindings/input/input.h>
#include "omap-gpmc-smsc911x.dtsi"

/ {
	cpus {
		cpu@0 {
			cpu0-supply = <&vcc>;
		};
	};

	leds {
		compatible = "gpio-leds";
		ledb {
			label = "omap3evm::ledb";
			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
			linux,default-trigger = "default-on";
		};
	};

	wl12xx_vmmc: wl12xx_vmmc {
		compatible = "regulator-fixed";
		regulator-name = "vwl1271";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio5 22 0>;	/* gpio150 */
		startup-delay-us = <70000>;
		enable-active-high;
		vin-supply = <&vmmc2>;
	};
};

&i2c1 {
	clock-frequency = <2600000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
		interrupt-parent = <&intc>;
	};
};

#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
#include "omap3-panel-sharp-ls037v7dw01.dtsi"

&backlight0 {
	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
};

&twl {
	twl_power: power {
		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
		ti,use_poweroff;
	};
};

&i2c2 {
	clock-frequency = <400000>;
};

&i2c3 {
	clock-frequency = <400000>;

	/*
	 * TVP5146 Video decoder-in for analog input support.
	 */
	tvp5146@5c {
		compatible = "ti,tvp5146m2";
		reg = <0x5c>;
	};
};

&lcd_3v3 {
	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
	enable-active-low;
};

&lcd0 {
	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
};

&mcspi1 {
	tsc2046@0 {
		interrupt-parent = <&gpio6>;
		interrupts = <15 0>;		/* gpio175 */
		pendown-gpio = <&gpio6 15 0>;
	};
};

&mmc1 {
	vmmc-supply = <&vmmc1>;
	vmmc_aux-supply = <&vsim>;
	bus-width = <8>;
};

&mmc2 {
	vmmc-supply = <&wl12xx_vmmc>;
	non-removable;
	bus-width = <4>;
	cap-power-off-card;
};

&twl_gpio {
	ti,use-leds;
};

&twl_keypad {
	linux,keymap = <
			MATRIX_KEY(2, 2, KEY_1)
			MATRIX_KEY(1, 1, KEY_2)
			MATRIX_KEY(0, 0, KEY_3)
			MATRIX_KEY(3, 2, KEY_4)
			MATRIX_KEY(2, 1, KEY_5)
			MATRIX_KEY(1, 0, KEY_6)
			MATRIX_KEY(1, 3, KEY_7)
			MATRIX_KEY(3, 1, KEY_8)
			MATRIX_KEY(2, 0, KEY_9)
			MATRIX_KEY(2, 3, KEY_KPASTERISK)
			MATRIX_KEY(0, 2, KEY_0)
			MATRIX_KEY(3, 0, KEY_KPDOT)
			/* s4 not wired */
			MATRIX_KEY(1, 2, KEY_BACKSPACE)
			MATRIX_KEY(0, 1, KEY_ENTER)
			>;
};

&usb_otg_hs {
	interface-type = <0>;
	usb-phy = <&usb2_phy>;
	phys = <&usb2_phy>;
	phy-names = "usb2-phy";
	mode = <3>;
	power = <50>;
};

&gpmc {
	ethernet@gpmc {
		interrupt-parent = <&gpio6>;
		interrupts = <16 8>;
		reg = <5 0 0xff>;
	};
};
Commit	Line	Data
465ce68b TL	1	/*
	2	* Common support for omap3 EVM boards
	3	*/
	4
8cf747f1	5	#include <dt-bindings/input/input.h>
5992234b TL	6	#include "omap-gpmc-smsc911x.dtsi"
5992234b TL	7
465ce68b TL	8	/ {
	9	cpus {
	10	cpu@0 {
	11	cpu0-supply = <&vcc>;
	12	};
	13	};
	14
	15	leds {
	16	compatible = "gpio-leds";
	17	ledb {
	18	label = "omap3evm::ledb";
	19	gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
	20	linux,default-trigger = "default-on";
	21	};
	22	};
5992234b TL	23
	24	wl12xx_vmmc: wl12xx_vmmc {
	25	compatible = "regulator-fixed";
	26	regulator-name = "vwl1271";
	27	regulator-min-microvolt = <1800000>;
	28	regulator-max-microvolt = <1800000>;
	29	gpio = <&gpio5 22 0>; /* gpio150 */
	30	startup-delay-us = <70000>;
	31	enable-active-high;
	32	vin-supply = <&vmmc2>;
	33	};
465ce68b TL	34	};
	35
	36	&i2c1 {
	37	clock-frequency = <2600000>;
	38
	39	twl: twl@48 {
	40	reg = <0x48>;
	41	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
	42	interrupt-parent = <&intc>;
	43	};
	44	};
	45
	46	#include "twl4030.dtsi"
	47	#include "twl4030_omap3.dtsi"
bc10f310 TL	48	#include "omap3-panel-sharp-ls037v7dw01.dtsi"
	49
	50	&backlight0 {
	51	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
	52	};
465ce68b	53
9188883f TL	54	&twl {
	55	twl_power: power {
	56	compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
	57	ti,use_poweroff;
	58	};
	59	};
	60
465ce68b TL	61	&i2c2 {
	62	clock-frequency = <400000>;
	63	};
	64
	65	&i2c3 {
	66	clock-frequency = <400000>;
	67
	68	/*
	69	* TVP5146 Video decoder-in for analog input support.
	70	*/
	71	tvp5146@5c {
	72	compatible = "ti,tvp5146m2";
	73	reg = <0x5c>;
	74	};
	75	};
	76
bc10f310 TL	77	&lcd_3v3 {
	78	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */
	79	enable-active-low;
	80	};
	81
	82	&lcd0 {
	83	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
	84	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
	85	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
	86	&gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
	87	&gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
	88	};
	89
	90	&mcspi1 {
	91	tsc2046@0 {
	92	interrupt-parent = <&gpio6>;
	93	interrupts = <15 0>; /* gpio175 */
	94	pendown-gpio = <&gpio6 15 0>;
	95	};
	96	};
	97
5992234b TL	98	&mmc1 {
	99	vmmc-supply = <&vmmc1>;
	100	vmmc_aux-supply = <&vsim>;
	101	bus-width = <8>;
	102	};
	103
	104	&mmc2 {
	105	vmmc-supply = <&wl12xx_vmmc>;
	106	non-removable;
	107	bus-width = <4>;
	108	cap-power-off-card;
	109	};
	110
465ce68b TL	111	&twl_gpio {
	112	ti,use-leds;
	113	};
	114
8cf747f1 TL	115	&twl_keypad {
	116	linux,keymap = <
	117	MATRIX_KEY(2, 2, KEY_1)
	118	MATRIX_KEY(1, 1, KEY_2)
	119	MATRIX_KEY(0, 0, KEY_3)
	120	MATRIX_KEY(3, 2, KEY_4)
	121	MATRIX_KEY(2, 1, KEY_5)
	122	MATRIX_KEY(1, 0, KEY_6)
	123	MATRIX_KEY(1, 3, KEY_7)
	124	MATRIX_KEY(3, 1, KEY_8)
	125	MATRIX_KEY(2, 0, KEY_9)
	126	MATRIX_KEY(2, 3, KEY_KPASTERISK)
	127	MATRIX_KEY(0, 2, KEY_0)
	128	MATRIX_KEY(3, 0, KEY_KPDOT)
	129	/* s4 not wired */
	130	MATRIX_KEY(1, 2, KEY_BACKSPACE)
	131	MATRIX_KEY(0, 1, KEY_ENTER)
	132	>;
	133	};
	134
465ce68b TL	135	&usb_otg_hs {
	136	interface-type = <0>;
	137	usb-phy = <&usb2_phy>;
f9efbce6 LT	138	phys = <&usb2_phy>;
f9efbce6 LT	139	phy-names = "usb2-phy";
465ce68b TL	140	mode = <3>;
	141	power = <50>;
	142	};
5992234b TL	143
	144	&gpmc {
	145	ethernet@gpmc {
	146	interrupt-parent = <&gpio6>;
	147	interrupts = <16 8>;
	148	reg = <5 0 0xff>;
	149	};
	150	};