]>
Commit | Line | Data |
---|---|---|
a1f4d17d CF |
1 | /* |
2 | * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com> | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License as published by | |
6 | * the Free Software Foundation; either version 2 of the License, or | |
7 | * (at your option) any later version. | |
8 | */ | |
9 | ||
10 | #include "omap36xx.dtsi" | |
11 | ||
12 | / { | |
13 | model = "INCOstartec LILLY-A83X module (DM3730)"; | |
14 | compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3"; | |
15 | ||
16 | chosen { | |
17 | bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0"; | |
18 | }; | |
19 | ||
20 | memory { | |
21 | device_type = "memory"; | |
22 | reg = <0x80000000 0x8000000>; /* 128 MB */ | |
23 | }; | |
24 | ||
25 | leds { | |
26 | compatible = "gpio-leds"; | |
27 | ||
28 | led1 { | |
29 | label = "lilly-a83x::led1"; | |
30 | gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; | |
31 | linux,default-trigger = "default-on"; | |
32 | }; | |
33 | ||
34 | }; | |
35 | ||
36 | sound { | |
37 | compatible = "ti,omap-twl4030"; | |
38 | ti,model = "lilly-a83x"; | |
39 | ||
40 | ti,mcbsp = <&mcbsp2>; | |
41 | ti,codec = <&twl_audio>; | |
42 | }; | |
43 | ||
44 | reg_vcc3: vcc3 { | |
45 | compatible = "regulator-fixed"; | |
46 | regulator-name = "VCC3"; | |
47 | regulator-min-microvolt = <3300000>; | |
48 | regulator-max-microvolt = <3300000>; | |
49 | regulator-always-on; | |
50 | }; | |
51 | ||
52 | hsusb1_phy: hsusb1_phy { | |
53 | compatible = "usb-nop-xceiv"; | |
54 | vcc-supply = <®_vcc3>; | |
55 | }; | |
56 | }; | |
57 | ||
58 | &omap3_pmx_wkup { | |
59 | pinctrl-names = "default"; | |
60 | ||
61 | lan9221_pins: pinmux_lan9221_pins { | |
62 | pinctrl-single,pins = < | |
63 | OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ | |
64 | >; | |
65 | }; | |
66 | ||
67 | tsc2048_pins: pinmux_tsc2048_pins { | |
68 | pinctrl-single,pins = < | |
69 | OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot6.gpio_8 */ | |
70 | >; | |
71 | }; | |
72 | ||
73 | mmc1cd_pins: pinmux_mmc1cd_pins { | |
74 | pinctrl-single,pins = < | |
75 | OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4) /* reserved.gpio_126 */ | |
76 | >; | |
77 | }; | |
78 | }; | |
79 | ||
80 | &omap3_pmx_core { | |
81 | pinctrl-names = "default"; | |
82 | ||
83 | uart1_pins: pinmux_uart1_pins { | |
84 | pinctrl-single,pins = < | |
85 | OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ | |
86 | OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ | |
87 | OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ | |
88 | OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ | |
89 | >; | |
90 | }; | |
91 | ||
92 | uart2_pins: pinmux_uart2_pins { | |
93 | pinctrl-single,pins = < | |
94 | OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clkx.uart2_tx */ | |
95 | OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */ | |
96 | >; | |
97 | }; | |
98 | ||
99 | uart3_pins: pinmux_uart3_pins { | |
100 | pinctrl-single,pins = < | |
101 | OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ | |
102 | OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ | |
103 | >; | |
104 | }; | |
105 | ||
106 | i2c1_pins: pinmux_i2c1_pins { | |
107 | pinctrl-single,pins = < | |
108 | OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ | |
109 | OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ | |
110 | >; | |
111 | }; | |
112 | ||
113 | i2c2_pins: pinmux_i2c2_pins { | |
114 | pinctrl-single,pins = < | |
115 | OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ | |
116 | OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ | |
117 | >; | |
118 | }; | |
119 | ||
120 | i2c3_pins: pinmux_i2c3_pins { | |
121 | pinctrl-single,pins = < | |
122 | OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ | |
123 | OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ | |
124 | >; | |
125 | }; | |
126 | ||
127 | hsusb1_pins: pinmux_hsusb1_pins { | |
128 | pinctrl-single,pins = < | |
129 | ||
130 | /* GPIO 182 controls USB-Hub reset. But USB-Phy its | |
131 | * reset can't be controlled. So we clamp this GPIO to | |
132 | * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub. | |
133 | */ | |
134 | ||
135 | OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcspi2_cs1.gpio_182 */ | |
136 | >; | |
137 | }; | |
138 | ||
139 | hsusb_otg_pins: pinmux_hsusb_otg_pins { | |
140 | pinctrl-single,pins = < | |
141 | OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */ | |
142 | OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */ | |
143 | OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */ | |
144 | OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */ | |
145 | OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */ | |
146 | OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */ | |
147 | OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */ | |
148 | OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */ | |
149 | OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */ | |
150 | OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */ | |
151 | OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */ | |
152 | OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */ | |
153 | >; | |
154 | }; | |
155 | ||
156 | mmc1_pins: pinmux_mmc1_pins { | |
157 | pinctrl-single,pins = < | |
158 | OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ | |
159 | OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ | |
160 | OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ | |
161 | OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ | |
162 | OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ | |
163 | OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ | |
164 | >; | |
165 | }; | |
166 | ||
167 | spi2_pins: pinmux_spi2_pins { | |
168 | pinctrl-single,pins = < | |
169 | OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_clk.mcspi2_clk */ | |
170 | OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_simo.mcspi2_simo */ | |
171 | OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi2_somi.mcspi2_somi */ | |
172 | OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0.mcspi2_cs0 */ | |
173 | >; | |
174 | }; | |
175 | }; | |
176 | ||
177 | &omap3_pmx_core2 { | |
178 | pinctrl-names = "default"; | |
179 | pinctrl-0 = < | |
180 | &hsusb1_2_pins | |
181 | >; | |
182 | ||
183 | hsusb1_2_pins: pinmux_hsusb1_2_pins { | |
184 | pinctrl-single,pins = < | |
185 | OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */ | |
186 | OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */ | |
187 | OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */ | |
188 | OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */ | |
189 | OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */ | |
190 | OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */ | |
191 | OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */ | |
192 | OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */ | |
193 | OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */ | |
194 | OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */ | |
195 | OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */ | |
196 | OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */ | |
197 | >; | |
198 | }; | |
199 | ||
200 | gpio1_pins: pinmux_gpio1_pins { | |
201 | pinctrl-single,pins = < | |
202 | OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* etk_d15.gpio_29 */ | |
203 | >; | |
204 | }; | |
205 | ||
206 | }; | |
207 | ||
208 | &gpio1 { | |
209 | pinctrl-names = "default"; | |
210 | pinctrl-0 = <&gpio1_pins>; | |
211 | }; | |
212 | ||
213 | &gpio6 { | |
214 | pinctrl-names = "default"; | |
215 | pinctrl-0 = <&hsusb1_pins>; | |
216 | }; | |
217 | ||
218 | &i2c1 { | |
219 | clock-frequency = <2600000>; | |
220 | pinctrl-names = "default"; | |
221 | pinctrl-0 = <&i2c1_pins>; | |
222 | ||
223 | twl: twl@48 { | |
224 | reg = <0x48>; | |
225 | interrupts = <7>; /* SYS_NIRQ cascaded to intc */ | |
226 | interrupt-parent = <&intc>; | |
227 | ||
228 | twl_audio: audio { | |
229 | compatible = "ti,twl4030-audio"; | |
230 | codec { | |
231 | }; | |
232 | }; | |
233 | }; | |
234 | }; | |
235 | ||
236 | #include "twl4030.dtsi" | |
237 | #include "twl4030_omap3.dtsi" | |
238 | ||
239 | &twl { | |
240 | vmmc1: regulator-vmmc1 { | |
241 | regulator-always-on; | |
242 | }; | |
243 | ||
244 | vdd1: regulator-vdd1 { | |
245 | regulator-always-on; | |
246 | }; | |
247 | ||
248 | vdd2: regulator-vdd2 { | |
249 | regulator-always-on; | |
250 | }; | |
251 | }; | |
252 | ||
253 | &i2c2 { | |
254 | clock-frequency = <2600000>; | |
255 | pinctrl-names = "default"; | |
256 | pinctrl-0 = <&i2c2_pins>; | |
257 | }; | |
258 | ||
259 | &i2c3 { | |
260 | clock-frequency = <2600000>; | |
261 | pinctrl-names = "default"; | |
262 | pinctrl-0 = <&i2c3_pins>; | |
263 | gpiom1: gpio@20 { | |
264 | compatible = "mcp,mcp23017"; | |
265 | gpio-controller; | |
266 | #gpio-cells = <2>; | |
267 | reg = <0x20>; | |
268 | }; | |
269 | }; | |
270 | ||
271 | &uart1 { | |
272 | pinctrl-names = "default"; | |
273 | pinctrl-0 = <&uart1_pins>; | |
274 | }; | |
275 | ||
276 | &uart2 { | |
277 | pinctrl-names = "default"; | |
278 | pinctrl-0 = <&uart2_pins>; | |
279 | }; | |
280 | ||
281 | &uart3 { | |
282 | pinctrl-names = "default"; | |
283 | pinctrl-0 = <&uart3_pins>; | |
284 | }; | |
285 | ||
286 | &uart4 { | |
287 | status = "disabled"; | |
288 | }; | |
289 | ||
290 | &mmc1 { | |
291 | cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; | |
292 | cd-inverted; | |
293 | vmmc-supply = <&vmmc1>; | |
294 | bus-width = <4>; | |
295 | pinctrl-names = "default"; | |
296 | pinctrl-0 = <&mmc1_pins &mmc1cd_pins>; | |
297 | cap-sdio-irq; | |
298 | cap-sd-highspeed; | |
299 | cap-mmc-highspeed; | |
300 | }; | |
301 | ||
302 | &mmc2 { | |
303 | status = "disabled"; | |
304 | }; | |
305 | ||
306 | &mmc3 { | |
307 | status = "disabled"; | |
308 | }; | |
309 | ||
310 | &mcspi2 { | |
311 | status = "okay"; | |
312 | pinctrl-names = "default"; | |
313 | pinctrl-0 = <&spi2_pins>; | |
314 | ||
315 | tsc2046@0 { | |
316 | reg = <0>; /* CS0 */ | |
317 | compatible = "ti,tsc2046"; | |
318 | interrupt-parent = <&gpio1>; | |
319 | interrupts = <8 0>; /* boot6 / gpio_8 */ | |
320 | spi-max-frequency = <1000000>; | |
321 | pendown-gpio = <&gpio1 8 0>; | |
322 | vcc-supply = <®_vcc3>; | |
323 | pinctrl-names = "default"; | |
324 | pinctrl-0 = <&tsc2048_pins>; | |
325 | ||
326 | ti,x-min = <300>; | |
327 | ti,x-max = <3000>; | |
328 | ti,y-min = <600>; | |
329 | ti,y-max = <3600>; | |
330 | ti,x-plate-ohms = <80>; | |
331 | ti,pressure-max = <255>; | |
332 | ti,swap-xy; | |
333 | ||
334 | linux,wakeup; | |
335 | }; | |
336 | }; | |
337 | ||
338 | &usbhsehci { | |
339 | phys = <&hsusb1_phy>; | |
340 | }; | |
341 | ||
342 | &usbhshost { | |
343 | pinctrl-names = "default"; | |
344 | pinctrl-0 = <&hsusb1_2_pins>; | |
345 | num-ports = <2>; | |
346 | port1-mode = "ehci-phy"; | |
347 | }; | |
348 | ||
349 | &usb_otg_hs { | |
350 | pinctrl-names = "default"; | |
351 | pinctrl-0 = <&hsusb_otg_pins>; | |
352 | interface-type = <0>; | |
353 | usb-phy = <&usb2_phy>; | |
354 | phys = <&usb2_phy>; | |
355 | phy-names = "usb2-phy"; | |
356 | mode = <3>; | |
357 | power = <50>; | |
358 | }; | |
359 | ||
360 | &gpmc { | |
361 | ranges = <0 0 0x30000000 0x1000000>, | |
362 | <7 0 0x15000000 0x01000000>; | |
363 | ||
364 | nand@0,0 { | |
365 | reg = <0 0 0x1000000>; | |
366 | nand-bus-width = <16>; | |
367 | ti,nand-ecc-opt = "bch8"; | |
368 | /* no elm on omap3 */ | |
369 | ||
370 | gpmc,mux-add-data = <0>; | |
a1f4d17d CF |
371 | gpmc,device-width = <2>; |
372 | gpmc,wait-pin = <0>; | |
373 | gpmc,wait-monitoring-ns = <0>; | |
374 | gpmc,burst-length= <4>; | |
375 | gpmc,cs-on-ns = <0>; | |
376 | gpmc,cs-rd-off-ns = <100>; | |
377 | gpmc,cs-wr-off-ns = <100>; | |
378 | gpmc,adv-on-ns = <0>; | |
379 | gpmc,adv-rd-off-ns = <100>; | |
380 | gpmc,adv-wr-off-ns = <100>; | |
381 | gpmc,oe-on-ns = <5>; | |
382 | gpmc,oe-off-ns = <75>; | |
383 | gpmc,we-on-ns = <5>; | |
384 | gpmc,we-off-ns = <75>; | |
385 | gpmc,rd-cycle-ns = <100>; | |
386 | gpmc,wr-cycle-ns = <100>; | |
387 | gpmc,access-ns = <60>; | |
388 | gpmc,page-burst-access-ns = <5>; | |
389 | gpmc,bus-turnaround-ns = <0>; | |
390 | gpmc,cycle2cycle-samecsen; | |
391 | gpmc,cycle2cycle-delay-ns = <50>; | |
392 | gpmc,wr-data-mux-bus-ns = <75>; | |
393 | gpmc,wr-access-ns = <155>; | |
394 | ||
395 | #address-cells = <1>; | |
396 | #size-cells = <1>; | |
397 | ||
398 | partition@0 { | |
399 | label = "MLO"; | |
400 | reg = <0 0x80000>; | |
401 | }; | |
402 | ||
403 | partition@0x80000 { | |
404 | label = "u-boot"; | |
405 | reg = <0x80000 0x1e0000>; | |
406 | }; | |
407 | ||
408 | partition@0x260000 { | |
409 | label = "u-boot-environment"; | |
410 | reg = <0x260000 0x20000>; | |
411 | }; | |
412 | ||
413 | partition@0x280000 { | |
414 | label = "kernel"; | |
415 | reg = <0x280000 0x500000>; | |
416 | }; | |
417 | ||
418 | partition@0x780000 { | |
419 | label = "filesystem"; | |
420 | reg = <0x780000 0xf880000>; | |
421 | }; | |
422 | }; | |
423 | ||
424 | ethernet@7,0 { | |
425 | compatible = "smsc,lan9221", "smsc,lan9115"; | |
426 | bank-width = <2>; | |
427 | gpmc,mux-add-data = <2>; | |
428 | gpmc,cs-on-ns = <10>; | |
429 | gpmc,cs-rd-off-ns = <60>; | |
430 | gpmc,cs-wr-off-ns = <60>; | |
431 | gpmc,adv-on-ns = <0>; | |
432 | gpmc,adv-rd-off-ns = <10>; | |
433 | gpmc,adv-wr-off-ns = <10>; | |
434 | gpmc,oe-on-ns = <10>; | |
435 | gpmc,oe-off-ns = <60>; | |
436 | gpmc,we-on-ns = <10>; | |
437 | gpmc,we-off-ns = <60>; | |
438 | gpmc,rd-cycle-ns = <100>; | |
439 | gpmc,wr-cycle-ns = <100>; | |
440 | gpmc,access-ns = <50>; | |
441 | gpmc,page-burst-access-ns = <5>; | |
442 | gpmc,bus-turnaround-ns = <0>; | |
443 | gpmc,cycle2cycle-delay-ns = <75>; | |
444 | gpmc,wr-data-mux-bus-ns = <15>; | |
445 | gpmc,wr-access-ns = <75>; | |
446 | gpmc,cycle2cycle-samecsen; | |
447 | gpmc,cycle2cycle-diffcsen; | |
448 | vddvario-supply = <®_vcc3>; | |
449 | vdd33a-supply = <®_vcc3>; | |
450 | reg-io-width = <4>; | |
451 | interrupt-parent = <&gpio5>; | |
452 | interrupts = <1 0x2>; | |
453 | reg = <7 0 0xff>; | |
454 | pinctrl-names = "default"; | |
455 | pinctrl-0 = <&lan9221_pins>; | |
456 | phy-mode = "mii"; | |
457 | }; | |
458 | }; |