]>
Commit | Line | Data |
---|---|---|
771048f5 NS |
1 | /* |
2 | * Copyright (C) 2015 | |
3 | * Nikolaus Schaller <hns@goldelico.com> | |
4 | * | |
5 | * Common device tree include for OpenPandora devices. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | #include <dt-bindings/input/input.h> | |
13 | ||
14 | / { | |
15 | cpus { | |
16 | cpu@0 { | |
17 | cpu0-supply = <&vcc>; | |
18 | }; | |
19 | }; | |
20 | ||
21 | memory { | |
22 | device_type = "memory"; | |
23 | reg = <0x80000000 0x20000000>; /* 512 MB */ | |
24 | }; | |
25 | ||
26 | aliases { | |
27 | display0 = &lcd; | |
28 | }; | |
29 | ||
30 | tv: connector@1 { | |
31 | compatible = "connector-analog-tv"; | |
32 | label = "tv"; | |
33 | ||
34 | port { | |
35 | tv_connector_in: endpoint { | |
36 | remote-endpoint = <&venc_out>; | |
37 | }; | |
38 | }; | |
39 | }; | |
40 | ||
41 | gpio-leds { | |
42 | ||
43 | compatible = "gpio-leds"; | |
44 | ||
45 | pinctrl-names = "default"; | |
46 | pinctrl-0 = <&led_pins>; | |
47 | ||
48 | led@1 { | |
49 | label = "pandora::sd1"; | |
50 | gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */ | |
51 | linux,default-trigger = "mmc0"; | |
52 | default-state = "off"; | |
53 | }; | |
54 | ||
55 | led@2 { | |
56 | label = "pandora::sd2"; | |
57 | gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */ | |
58 | linux,default-trigger = "mmc1"; | |
59 | default-state = "off"; | |
60 | }; | |
61 | ||
62 | led@3 { | |
63 | label = "pandora::bluetooth"; | |
64 | gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */ | |
65 | linux,default-trigger = "heartbeat"; | |
66 | default-state = "off"; | |
67 | }; | |
68 | ||
69 | led@4 { | |
70 | label = "pandora::wifi"; | |
71 | gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */ | |
72 | linux,default-trigger = "mmc2"; | |
73 | default-state = "off"; | |
74 | }; | |
75 | }; | |
76 | ||
77 | gpio-keys { | |
78 | compatible = "gpio-keys"; | |
79 | ||
80 | pinctrl-names = "default"; | |
81 | pinctrl-0 = <&button_pins>; | |
82 | ||
83 | up-button { | |
84 | label = "up"; | |
85 | linux,code = <KEY_UP>; | |
86 | gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */ | |
0c4d63b3 | 87 | wakeup-source; |
771048f5 NS |
88 | }; |
89 | ||
90 | down-button { | |
91 | label = "down"; | |
92 | linux,code = <KEY_DOWN>; | |
93 | gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */ | |
0c4d63b3 | 94 | wakeup-source; |
771048f5 NS |
95 | }; |
96 | ||
97 | left-button { | |
98 | label = "left"; | |
99 | linux,code = <KEY_LEFT>; | |
100 | gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */ | |
0c4d63b3 | 101 | wakeup-source; |
771048f5 NS |
102 | }; |
103 | ||
104 | right-button { | |
105 | label = "right"; | |
106 | linux,code = <KEY_RIGHT>; | |
107 | gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */ | |
0c4d63b3 | 108 | wakeup-source; |
771048f5 NS |
109 | }; |
110 | ||
111 | pageup-button { | |
112 | label = "game 1"; | |
113 | linux,code = <KEY_PAGEUP>; | |
114 | gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */ | |
0c4d63b3 | 115 | wakeup-source; |
771048f5 NS |
116 | }; |
117 | ||
118 | pagedown-button { | |
119 | label = "game 3"; | |
120 | linux,code = <KEY_PAGEDOWN>; | |
121 | gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */ | |
0c4d63b3 | 122 | wakeup-source; |
771048f5 NS |
123 | }; |
124 | ||
125 | home-button { | |
126 | label = "game 4"; | |
127 | linux,code = <KEY_HOME>; | |
128 | gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */ | |
0c4d63b3 | 129 | wakeup-source; |
771048f5 NS |
130 | }; |
131 | ||
132 | end-button { | |
133 | label = "game 2"; | |
134 | linux,code = <KEY_END>; | |
135 | gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */ | |
0c4d63b3 | 136 | wakeup-source; |
771048f5 NS |
137 | }; |
138 | ||
139 | right-shift { | |
140 | label = "l"; | |
141 | linux,code = <KEY_RIGHTSHIFT>; | |
142 | gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */ | |
0c4d63b3 | 143 | wakeup-source; |
771048f5 NS |
144 | }; |
145 | ||
146 | kp-plus { | |
147 | label = "l2"; | |
148 | linux,code = <KEY_KPPLUS>; | |
149 | gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */ | |
0c4d63b3 | 150 | wakeup-source; |
771048f5 NS |
151 | }; |
152 | ||
153 | right-ctrl { | |
154 | label = "r"; | |
155 | linux,code = <KEY_RIGHTCTRL>; | |
156 | gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */ | |
0c4d63b3 | 157 | wakeup-source; |
771048f5 NS |
158 | }; |
159 | ||
160 | kp-minus { | |
161 | label = "r2"; | |
162 | linux,code = <KEY_KPMINUS>; | |
163 | gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */ | |
0c4d63b3 | 164 | wakeup-source; |
771048f5 NS |
165 | }; |
166 | ||
167 | left-ctrl { | |
168 | label = "ctrl"; | |
169 | linux,code = <KEY_LEFTCTRL>; | |
170 | gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */ | |
0c4d63b3 | 171 | wakeup-source; |
771048f5 NS |
172 | }; |
173 | ||
174 | menu { | |
175 | label = "menu"; | |
176 | linux,code = <KEY_MENU>; | |
177 | gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */ | |
0c4d63b3 | 178 | wakeup-source; |
771048f5 NS |
179 | }; |
180 | ||
181 | hold { | |
182 | label = "hold"; | |
183 | linux,code = <KEY_COFFEE>; | |
184 | gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */ | |
0c4d63b3 | 185 | wakeup-source; |
771048f5 NS |
186 | }; |
187 | ||
188 | left-alt { | |
189 | label = "alt"; | |
190 | linux,code = <KEY_LEFTALT>; | |
191 | gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */ | |
0c4d63b3 | 192 | wakeup-source; |
771048f5 NS |
193 | }; |
194 | ||
195 | lid { | |
196 | label = "lid"; | |
197 | linux,code = <0x00>; /* SW_LID lid shut */ | |
198 | linux,input-type = <0x05>; /* EV_SW */ | |
199 | gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */ | |
200 | }; | |
201 | }; | |
f7c57f8c GI |
202 | |
203 | /* HS USB Host PHY on PORT 2 */ | |
204 | hsusb2_phy: hsusb2_phy { | |
205 | compatible = "usb-nop-xceiv"; | |
206 | reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */ | |
207 | vcc-supply = <&vaux2>; | |
208 | }; | |
209 | ||
210 | /* HS USB Host VBUS supply | |
211 | * disabling this regulator causes current leakage, and LCD flicker | |
212 | * on earlier (CC) board revisions, so keep it always on */ | |
213 | usb_host_5v: fixed-regulator-usb_host_5v { | |
214 | compatible = "regulator-fixed"; | |
215 | regulator-name = "usb_host_5v"; | |
216 | regulator-min-microvolt = <5000000>; | |
217 | regulator-max-microvolt = <5000000>; | |
218 | regulator-always-on; | |
219 | regulator-boot-on; | |
220 | enable-active-high; | |
3a637e00 | 221 | gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ |
f7c57f8c GI |
222 | }; |
223 | ||
224 | /* wg7210 (wifi+bt module) 32k clock buffer */ | |
225 | wg7210_32k: fixed-regulator-wg7210_32k { | |
226 | compatible = "regulator-fixed"; | |
227 | regulator-name = "wg7210_32k"; | |
228 | regulator-min-microvolt = <1800000>; | |
229 | regulator-max-microvolt = <1800000>; | |
230 | regulator-always-on; | |
231 | enable-active-high; | |
232 | gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>; | |
233 | }; | |
771048f5 NS |
234 | }; |
235 | ||
236 | &omap3_pmx_core { | |
237 | ||
238 | mmc1_pins: pinmux_mmc1_pins { | |
239 | pinctrl-single,pins = < | |
240 | OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ | |
241 | OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ | |
242 | OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ | |
243 | OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ | |
244 | OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ | |
245 | OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ | |
246 | >; | |
247 | }; | |
248 | ||
249 | mmc2_pins: pinmux_mmc2_pins { | |
250 | pinctrl-single,pins = < | |
251 | OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ | |
252 | OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ | |
253 | OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ | |
254 | OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ | |
255 | OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ | |
256 | OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ | |
257 | OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */ | |
258 | OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */ | |
259 | OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */ | |
260 | OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */ | |
261 | >; | |
262 | }; | |
263 | ||
264 | dss_dpi_pins: pinmux_dss_dpi_pins { | |
265 | pinctrl-single,pins = < | |
266 | OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ | |
267 | OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ | |
268 | OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ | |
269 | OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ | |
270 | OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ | |
271 | OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ | |
272 | OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ | |
273 | OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ | |
274 | OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ | |
275 | OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ | |
276 | OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ | |
277 | OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ | |
278 | OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ | |
279 | OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ | |
280 | OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ | |
281 | OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ | |
282 | OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ | |
283 | OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ | |
284 | OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ | |
285 | OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ | |
286 | OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ | |
287 | OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ | |
288 | OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ | |
289 | OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ | |
290 | OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ | |
291 | OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ | |
292 | OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ | |
293 | OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ | |
294 | OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */ | |
295 | >; | |
296 | }; | |
297 | ||
298 | uart3_pins: pinmux_uart3_pins { | |
299 | pinctrl-single,pins = < | |
300 | OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ | |
301 | OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ | |
302 | >; | |
303 | }; | |
304 | ||
305 | led_pins: pinmux_leds_pins { | |
306 | pinctrl-single,pins = < | |
307 | OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */ | |
308 | OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */ | |
309 | OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */ | |
310 | OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */ | |
311 | >; | |
312 | }; | |
313 | ||
314 | button_pins: pinmux_button_pins { | |
315 | pinctrl-single,pins = < | |
316 | OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */ | |
317 | OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */ | |
318 | OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */ | |
319 | OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */ | |
320 | OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */ | |
321 | OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */ | |
322 | OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */ | |
323 | OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */ | |
324 | OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */ | |
325 | OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */ | |
326 | OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */ | |
327 | OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */ | |
328 | OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */ | |
329 | OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */ | |
330 | OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */ | |
331 | OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */ | |
332 | OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */ | |
333 | >; | |
334 | }; | |
335 | ||
336 | penirq_pins: pinmux_penirq_pins { | |
337 | pinctrl-single,pins = < | |
338 | /* here we could enable to wakeup the cpu from suspend by a pen touch */ | |
339 | OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */ | |
340 | >; | |
341 | }; | |
342 | ||
343 | }; | |
344 | ||
345 | &omap3_pmx_core2 { | |
346 | /* define in CPU specific file that includes this one | |
347 | * use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD() | |
348 | */ | |
349 | }; | |
350 | ||
351 | &i2c1 { | |
352 | clock-frequency = <2600000>; | |
353 | ||
354 | twl: twl@48 { | |
355 | reg = <0x48>; | |
356 | interrupts = <7>; /* SYS_NIRQ cascaded to intc */ | |
357 | interrupt-parent = <&intc>; | |
358 | ||
359 | twl_power: power { | |
360 | compatible = "ti,twl4030-power-reset"; | |
361 | ti,use_poweroff; | |
362 | }; | |
363 | ||
364 | twl_audio: audio { | |
365 | compatible = "ti,twl4030-audio"; | |
366 | ||
367 | codec { | |
368 | ti,ramp_delay_value = <3>; | |
369 | }; | |
370 | }; | |
371 | }; | |
372 | }; | |
373 | ||
374 | #include "twl4030.dtsi" | |
375 | #include "twl4030_omap3.dtsi" | |
376 | ||
377 | &twl_keypad { | |
378 | keypad,num-rows = <8>; | |
379 | keypad,num-columns = <6>; | |
380 | linux,keymap = < | |
381 | MATRIX_KEY(0, 0, KEY_9) | |
382 | MATRIX_KEY(0, 1, KEY_8) | |
383 | MATRIX_KEY(0, 2, KEY_I) | |
384 | MATRIX_KEY(0, 3, KEY_J) | |
385 | MATRIX_KEY(0, 4, KEY_N) | |
386 | MATRIX_KEY(0, 5, KEY_M) | |
387 | MATRIX_KEY(1, 0, KEY_0) | |
388 | MATRIX_KEY(1, 1, KEY_7) | |
389 | MATRIX_KEY(1, 2, KEY_U) | |
390 | MATRIX_KEY(1, 3, KEY_H) | |
391 | MATRIX_KEY(1, 4, KEY_B) | |
392 | MATRIX_KEY(1, 5, KEY_SPACE) | |
393 | MATRIX_KEY(2, 0, KEY_BACKSPACE) | |
394 | MATRIX_KEY(2, 1, KEY_6) | |
395 | MATRIX_KEY(2, 2, KEY_Y) | |
396 | MATRIX_KEY(2, 3, KEY_G) | |
397 | MATRIX_KEY(2, 4, KEY_V) | |
398 | MATRIX_KEY(2, 5, KEY_FN) | |
399 | MATRIX_KEY(3, 0, KEY_O) | |
400 | MATRIX_KEY(3, 1, KEY_5) | |
401 | MATRIX_KEY(3, 2, KEY_T) | |
402 | MATRIX_KEY(3, 3, KEY_F) | |
403 | MATRIX_KEY(3, 4, KEY_C) | |
404 | MATRIX_KEY(4, 0, KEY_P) | |
405 | MATRIX_KEY(4, 1, KEY_4) | |
406 | MATRIX_KEY(4, 2, KEY_R) | |
407 | MATRIX_KEY(4, 3, KEY_D) | |
408 | MATRIX_KEY(4, 4, KEY_X) | |
409 | MATRIX_KEY(5, 0, KEY_K) | |
410 | MATRIX_KEY(5, 1, KEY_3) | |
411 | MATRIX_KEY(5, 2, KEY_E) | |
412 | MATRIX_KEY(5, 3, KEY_S) | |
413 | MATRIX_KEY(5, 4, KEY_Z) | |
414 | MATRIX_KEY(6, 0, KEY_L) | |
415 | MATRIX_KEY(6, 1, KEY_2) | |
416 | MATRIX_KEY(6, 2, KEY_W) | |
417 | MATRIX_KEY(6, 3, KEY_A) | |
418 | MATRIX_KEY(6, 4, KEY_RIGHTBRACE) | |
419 | MATRIX_KEY(7, 0, KEY_ENTER) | |
420 | MATRIX_KEY(7, 1, KEY_1) | |
421 | MATRIX_KEY(7, 2, KEY_Q) | |
422 | MATRIX_KEY(7, 3, KEY_LEFTSHIFT) | |
423 | MATRIX_KEY(7, 4, KEY_LEFTBRACE ) | |
424 | >; | |
425 | }; | |
426 | ||
427 | /* backup battery charger */ | |
428 | &charger { | |
429 | ti,bb-uvolt = <3200000>; | |
430 | ti,bb-uamp = <150>; | |
431 | }; | |
432 | ||
433 | /* MMC2 */ | |
434 | &vmmc2 { | |
435 | regulator-min-microvolt = <1850000>; | |
436 | regulator-max-microvolt = <3150000>; | |
437 | }; | |
438 | ||
439 | /* LCD */ | |
440 | &vaux1 { | |
441 | regulator-min-microvolt = <3000000>; | |
442 | regulator-max-microvolt = <3000000>; | |
443 | }; | |
444 | ||
445 | /* USB Host PHY */ | |
446 | &vaux2 { | |
447 | regulator-min-microvolt = <1800000>; | |
448 | regulator-max-microvolt = <1800000>; | |
449 | }; | |
450 | ||
451 | /* available on expansion connector */ | |
452 | &vaux3 { | |
453 | regulator-min-microvolt = <2800000>; | |
454 | regulator-max-microvolt = <2800000>; | |
455 | }; | |
456 | ||
457 | /* ADS7846 and nubs */ | |
458 | &vaux4 { | |
459 | regulator-min-microvolt = <2800000>; | |
460 | regulator-max-microvolt = <2800000>; | |
461 | }; | |
462 | ||
463 | /* power audio DAC and LID sensor */ | |
464 | &vsim { | |
465 | regulator-min-microvolt = <2800000>; | |
466 | regulator-max-microvolt = <2800000>; | |
467 | regulator-always-on; | |
468 | }; | |
469 | ||
470 | &i2c2 { | |
471 | clock-frequency = <100000>; | |
472 | /* no clients so we should disable clock */ | |
473 | }; | |
474 | ||
475 | &i2c3 { | |
476 | clock-frequency = <100000>; | |
477 | ||
478 | bq27500@55 { | |
479 | compatible = "ti,bq27500"; | |
480 | reg = <0x55>; | |
481 | }; | |
482 | ||
483 | }; | |
484 | ||
485 | &usb_otg_hs { | |
486 | interface-type = <0>; | |
487 | usb-phy = <&usb2_phy>; | |
488 | phys = <&usb2_phy>; | |
489 | phy-names = "usb2-phy"; | |
490 | mode = <3>; | |
491 | power = <50>; | |
492 | }; | |
493 | ||
a4e1adb9 GI |
494 | /* |
495 | * Many pandora boards have been produced with defective write-protect switches | |
496 | * on either slot, so it was decided not to use this feature. If you know | |
497 | * your board has good switches, feel free to uncomment wp-gpios below. | |
498 | */ | |
771048f5 NS |
499 | &mmc1 { |
500 | pinctrl-names = "default"; | |
501 | pinctrl-0 = <&mmc1_pins>; | |
502 | vmmc-supply = <&vmmc1>; | |
503 | bus-width = <4>; | |
504 | cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; | |
a4e1adb9 | 505 | /*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/ /* GPIO_126 */ |
771048f5 NS |
506 | }; |
507 | ||
508 | &mmc2 { | |
509 | pinctrl-names = "default"; | |
510 | pinctrl-0 = <&mmc2_pins>; | |
511 | vmmc-supply = <&vmmc2>; | |
512 | bus-width = <4>; | |
a4e1adb9 GI |
513 | cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; |
514 | /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */ | |
771048f5 NS |
515 | }; |
516 | ||
f9d50fef GI |
517 | /* mmc3 is probed using pdata-quirks to pass wl1251 card data */ |
518 | &mmc3 { | |
519 | status = "disabled"; | |
520 | }; | |
521 | ||
771048f5 NS |
522 | /* bluetooth*/ |
523 | &uart1 { | |
524 | }; | |
525 | ||
526 | /* spare (expansion connector) */ | |
527 | &uart2 { | |
528 | }; | |
529 | ||
530 | /* console (expansion connector) */ | |
531 | &uart3 { | |
532 | pinctrl-names = "default"; | |
533 | pinctrl-0 = <&uart3_pins>; | |
534 | interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; | |
535 | }; | |
536 | ||
537 | &usbhshost { | |
538 | port2-mode = "ehci-phy"; | |
539 | }; | |
540 | ||
f7c57f8c GI |
541 | &usbhsehci { |
542 | phys = <0 &hsusb2_phy>; | |
543 | }; | |
544 | ||
771048f5 NS |
545 | &gpmc { |
546 | ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ | |
547 | ||
548 | nand@0,0 { | |
549 | reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ | |
550 | nand-bus-width = <16>; | |
551 | ti,nand-ecc-opt = "sw"; | |
552 | ||
553 | gpmc,sync-clk-ps = <0>; | |
554 | gpmc,cs-on-ns = <0>; | |
555 | gpmc,cs-rd-off-ns = <44>; | |
556 | gpmc,cs-wr-off-ns = <44>; | |
557 | gpmc,adv-on-ns = <6>; | |
558 | gpmc,adv-rd-off-ns = <34>; | |
559 | gpmc,adv-wr-off-ns = <44>; | |
560 | gpmc,we-off-ns = <40>; | |
561 | gpmc,oe-off-ns = <54>; | |
562 | gpmc,access-ns = <64>; | |
563 | gpmc,rd-cycle-ns = <82>; | |
564 | gpmc,wr-cycle-ns = <82>; | |
565 | gpmc,wr-access-ns = <40>; | |
566 | gpmc,wr-data-mux-bus-ns = <0>; | |
567 | gpmc,device-width = <2>; | |
568 | ||
569 | #address-cells = <1>; | |
570 | #size-cells = <1>; | |
571 | ||
572 | /* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */ | |
573 | ||
574 | x-loader@0 { | |
575 | label = "xloader"; | |
576 | reg = <0 0x80000>; | |
577 | }; | |
578 | ||
579 | bootloaders@80000 { | |
580 | label = "uboot"; | |
581 | reg = <0x80000 0x1e0000>; | |
582 | }; | |
583 | ||
584 | bootloaders_env@260000 { | |
585 | label = "uboot-env"; | |
586 | reg = <0x260000 0x20000>; | |
587 | }; | |
588 | ||
589 | kernel@280000 { | |
590 | label = "boot"; | |
591 | reg = <0x280000 0xa00000>; | |
592 | }; | |
593 | ||
a4e1adb9 | 594 | filesystem@c80000 { |
771048f5 NS |
595 | label = "rootfs"; |
596 | reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */ | |
597 | }; | |
598 | }; | |
599 | }; | |
600 | ||
601 | &mcspi1 { | |
602 | tsc2046@0 { | |
603 | reg = <0>; /* CS0 */ | |
604 | compatible = "ti,tsc2046"; | |
605 | spi-max-frequency = <1000000>; | |
606 | pinctrl-names = "default"; | |
607 | pinctrl-0 = <&penirq_pins>; | |
608 | interrupt-parent = <&gpio3>; | |
609 | interrupts = <30 0>; /* GPIO_94 */ | |
3a637e00 | 610 | pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; |
771048f5 NS |
611 | vcc-supply = <&vaux4>; |
612 | ||
613 | ti,x-min = /bits/ 16 <0>; | |
614 | ti,x-max = /bits/ 16 <8000>; | |
615 | ti,y-min = /bits/ 16 <0>; | |
616 | ti,y-max = /bits/ 16 <4800>; | |
617 | ti,x-plate-ohms = /bits/ 16 <40>; | |
618 | ti,pressure-max = /bits/ 16 <255>; | |
619 | ||
0c4d63b3 | 620 | wakeup-source; |
771048f5 NS |
621 | }; |
622 | ||
623 | lcd: lcd@1 { | |
624 | reg = <1>; /* CS1 */ | |
625 | compatible = "omapdss,tpo,td043mtea1"; | |
626 | spi-max-frequency = <100000>; | |
627 | spi-cpol; | |
628 | spi-cpha; | |
629 | ||
630 | label = "lcd"; | |
631 | reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */ | |
632 | vcc-supply = <&vaux1>; | |
633 | ||
634 | port { | |
635 | lcd_in: endpoint { | |
636 | remote-endpoint = <&dpi_out>; | |
637 | }; | |
638 | }; | |
639 | }; | |
640 | ||
641 | ||
642 | }; | |
643 | ||
644 | /* n/a - used as GPIOs */ | |
645 | &mcbsp1 { | |
646 | }; | |
647 | ||
648 | /* audio DAC */ | |
649 | &mcbsp2 { | |
650 | }; | |
651 | ||
652 | /* bluetooth */ | |
653 | &mcbsp3 { | |
654 | }; | |
655 | ||
656 | /* to twl4030*/ | |
657 | &mcbsp4 { | |
658 | }; | |
659 | ||
660 | &venc { | |
661 | status = "ok"; | |
662 | ||
663 | vdda-supply = <&vdac>; | |
664 | ||
665 | port { | |
666 | venc_out: endpoint { | |
667 | remote-endpoint = <&tv_connector_in>; | |
668 | ti,channels = <2>; | |
669 | }; | |
670 | }; | |
671 | }; | |
672 | ||
673 | &dss { | |
674 | pinctrl-names = "default"; | |
675 | pinctrl-0 = < &dss_dpi_pins >; | |
676 | ||
677 | status = "ok"; | |
678 | vdds_dsi-supply = <&vpll2>; | |
679 | ||
680 | port { | |
681 | dpi_out: endpoint { | |
682 | remote-endpoint = <&lcd_in>; | |
683 | data-lines = <24>; | |
684 | }; | |
685 | }; | |
686 | }; |