]>
Commit | Line | Data |
---|---|---|
5eb9b5e5 FV |
1 | /* |
2 | * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | ||
9 | #include "omap443x.dtsi" | |
10 | ||
11 | / { | |
12 | model = "Gumstix Duovero"; | |
13 | compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4"; | |
14 | ||
15 | memory { | |
16 | device_type = "memory"; | |
17 | reg = <0x80000000 0x40000000>; /* 1 GB */ | |
18 | }; | |
19 | ||
20 | sound { | |
21 | compatible = "ti,abe-twl6040"; | |
22 | ti,model = "DuoVero"; | |
23 | ||
24 | ti,mclk-freq = <38400000>; | |
25 | ||
26 | ti,mcpdm = <&mcpdm>; | |
27 | ||
28 | ti,twl6040 = <&twl6040>; | |
29 | ||
30 | /* Audio routing */ | |
31 | ti,audio-routing = | |
32 | "Headset Stereophone", "HSOL", | |
33 | "Headset Stereophone", "HSOR", | |
34 | "HSMIC", "Headset Mic", | |
35 | "Headset Mic", "Headset Mic Bias"; | |
36 | }; | |
37 | ||
38 | /* HS USB Host PHY on PORT 1 */ | |
39 | hsusb1_phy: hsusb1_phy { | |
40 | compatible = "usb-nop-xceiv"; | |
41 | reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ | |
42 | ||
43 | pinctrl-names = "default"; | |
44 | pinctrl-0 = <&hsusb1phy_pins>; | |
45 | ||
46 | clocks = <&auxclk3_ck>; | |
47 | clock-names = "main_clk"; | |
48 | clock-frequency = <19200000>; | |
49 | }; | |
50 | ||
51 | /* regulator for w2cbw0015 on sdio5 */ | |
52 | w2cbw0015_vmmc: w2cbw0015_vmmc { | |
53 | pinctrl-names = "default"; | |
54 | pinctrl-0 = <&w2cbw0015_pins>; | |
55 | compatible = "regulator-fixed"; | |
56 | regulator-name = "w2cbw0015"; | |
57 | regulator-min-microvolt = <3000000>; | |
58 | regulator-max-microvolt = <3000000>; | |
59 | gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; /* gpio_43 */ | |
60 | startup-delay-us = <70000>; | |
61 | enable-active-high; | |
62 | regulator-boot-on; | |
63 | }; | |
64 | }; | |
65 | ||
66 | &omap4_pmx_core { | |
67 | pinctrl-names = "default"; | |
68 | pinctrl-0 = < | |
69 | &twl6040_pins | |
70 | &mcpdm_pins | |
71 | &mcbsp1_pins | |
72 | &hsusbb1_pins | |
73 | >; | |
74 | ||
75 | twl6040_pins: pinmux_twl6040_pins { | |
76 | pinctrl-single,pins = < | |
77 | 0x126 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ | |
78 | 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ | |
79 | >; | |
80 | }; | |
81 | ||
82 | mcpdm_pins: pinmux_mcpdm_pins { | |
83 | pinctrl-single,pins = < | |
84 | 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ | |
85 | 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ | |
86 | 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ | |
87 | 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ | |
88 | 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ | |
89 | >; | |
90 | }; | |
91 | ||
92 | mcbsp1_pins: pinmux_mcbsp1_pins { | |
93 | pinctrl-single,pins = < | |
94 | 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ | |
95 | 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ | |
96 | 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ | |
97 | 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ | |
98 | >; | |
99 | }; | |
100 | ||
101 | hsusbb1_pins: pinmux_hsusbb1_pins { | |
102 | pinctrl-single,pins = < | |
103 | 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ | |
104 | 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ | |
105 | 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ | |
106 | 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ | |
107 | 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ | |
108 | 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ | |
109 | 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ | |
110 | 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ | |
111 | 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ | |
112 | 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ | |
113 | 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ | |
114 | 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ | |
115 | >; | |
116 | }; | |
117 | ||
118 | hsusb1phy_pins: pinmux_hsusb1phy_pins { | |
119 | pinctrl-single,pins = < | |
120 | 0x4c (PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ | |
121 | >; | |
122 | }; | |
123 | ||
124 | w2cbw0015_pins: pinmux_w2cbw0015_pins { | |
125 | pinctrl-single,pins = < | |
126 | 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ | |
127 | 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ | |
128 | >; | |
129 | }; | |
130 | ||
131 | i2c1_pins: pinmux_i2c1_pins { | |
132 | pinctrl-single,pins = < | |
133 | 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ | |
134 | 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ | |
135 | >; | |
136 | }; | |
137 | ||
138 | i2c4_pins: pinmux_i2c4_pins { | |
139 | pinctrl-single,pins = < | |
140 | 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ | |
141 | 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ | |
142 | >; | |
143 | }; | |
144 | ||
145 | mmc1_pins: pinmux_mmc1_pins { | |
146 | pinctrl-single,pins = < | |
147 | 0xa2 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ | |
148 | 0xa4 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ | |
149 | 0xa6 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */ | |
150 | 0xa8 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ | |
151 | 0xaa (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ | |
152 | 0xac (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ | |
153 | >; | |
154 | }; | |
155 | ||
156 | mmc5_pins: pinmux_mmc5_pins { | |
157 | pinctrl-single,pins = < | |
158 | 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ | |
159 | 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ | |
160 | 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */ | |
161 | 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */ | |
162 | 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */ | |
163 | 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */ | |
164 | >; | |
165 | }; | |
166 | }; | |
167 | ||
168 | /* PMIC */ | |
169 | &i2c1 { | |
170 | pinctrl-names = "default"; | |
171 | pinctrl-0 = <&i2c1_pins>; | |
172 | ||
173 | clock-frequency = <400000>; | |
174 | ||
175 | twl: twl@48 { | |
176 | reg = <0x48>; | |
177 | interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ | |
178 | interrupt-parent = <&gic>; | |
179 | }; | |
180 | ||
181 | twl6040: twl@4b { | |
182 | compatible = "ti,twl6040"; | |
183 | reg = <0x4b>; | |
184 | interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ | |
185 | interrupt-parent = <&gic>; | |
186 | ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */ | |
187 | ||
188 | vio-supply = <&v1v8>; | |
189 | v2v1-supply = <&v2v1>; | |
190 | enable-active-high; | |
191 | }; | |
192 | }; | |
193 | ||
194 | #include "twl6030.dtsi" | |
195 | #include "twl6030_omap4.dtsi" | |
196 | ||
197 | /* on-board bluetooth / WiFi module */ | |
198 | &i2c4 { | |
199 | pinctrl-names = "default"; | |
200 | pinctrl-0 = <&i2c4_pins>; | |
201 | ||
202 | clock-frequency = <400000>; | |
203 | }; | |
204 | ||
205 | &mmc1 { | |
206 | pinctrl-names = "default"; | |
207 | pinctrl-0 = <&mmc1_pins>; | |
208 | ||
209 | vmmc-supply = <&vmmc>; | |
210 | ti,bus-width = <4>; | |
211 | ti,non-removable; /* FIXME: use PMIC_MMC detect */ | |
212 | }; | |
213 | ||
214 | &mmc2 { | |
215 | status = "disabled"; | |
216 | }; | |
217 | ||
218 | /* mmc3 is available to the expansion board */ | |
219 | ||
220 | &mmc4 { | |
221 | status = "disabled"; | |
222 | }; | |
223 | ||
224 | /* on-board WiFi module */ | |
225 | &mmc5 { | |
226 | pinctrl-names = "default"; | |
227 | pinctrl-0 = <&mmc5_pins>; | |
228 | ||
229 | vmmc-supply = <&w2cbw0015_vmmc>; | |
230 | ti,bus-width = <4>; | |
231 | ti,non-removable; | |
232 | cap-power-off-card; | |
233 | }; | |
234 | ||
235 | &twl_usb_comparator { | |
236 | usb-supply = <&vusb>; | |
237 | }; | |
238 | ||
239 | &usb_otg_hs { | |
240 | interface-type = <1>; | |
241 | mode = <3>; | |
242 | power = <50>; | |
243 | }; | |
244 | ||
245 | &usbhshost { | |
246 | port1-mode = "ehci-phy"; | |
247 | }; | |
248 | ||
249 | &usbhsehci { | |
250 | phys = <&hsusb1_phy>; | |
251 | }; | |
252 |