[mirror_ubuntu-jammy-kernel.git] / arch / arm / boot / dts / omap4-duovero.dtsi

/*
 * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include "omap443x.dtsi"

/ {
	model = "Gumstix Duovero";
	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";

	chosen {
		stdout-path = &uart3;
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x80000000 0x40000000>; /* 1 GB */
	};

	sound {
		compatible = "ti,abe-twl6040";
		ti,model = "DuoVero";

		ti,mclk-freq = <38400000>;

		ti,mcpdm = <&mcpdm>;

		ti,twl6040 = <&twl6040>;

		/* Audio routing */
		ti,audio-routing =
			"Headset Stereophone", "HSOL",
			"Headset Stereophone", "HSOR",
			"HSMIC", "Headset Mic",
			"Headset Mic", "Headset Mic Bias";
	};

	/* HS USB Host PHY on PORT 1 */
	hsusb1_phy: hsusb1_phy {
		compatible = "usb-nop-xceiv";
		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
		#phy-cells = <0>;

		pinctrl-names = "default";
		pinctrl-0 = <&hsusb1phy_pins>;

		clocks = <&auxclk3_ck>;
		clock-names = "main_clk";
		clock-frequency = <19200000>;
	};

	/* regulator for w2cbw0015 on sdio5 */
	w2cbw0015_vmmc: w2cbw0015_vmmc {
		pinctrl-names = "default";
		pinctrl-0 = <&w2cbw0015_pins>;
		compatible = "regulator-fixed";
		regulator-name = "w2cbw0015";
		regulator-min-microvolt = <3000000>;
		regulator-max-microvolt = <3000000>;
		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
		startup-delay-us = <70000>;
		enable-active-high;
		regulator-boot-on;
	};
};

&omap4_pmx_core {
	pinctrl-names = "default";
	pinctrl-0 = <
			&twl6040_pins
			&hsusbb1_pins
	>;

	twl6040_pins: pinmux_twl6040_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
		>;
	};

	mcpdm_pins: pinmux_mcpdm_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
		>;
	};

	mcbsp1_pins: pinmux_mcbsp1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
		>;
	};

	hsusbb1_pins: pinmux_hsusbb1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
		>;
	};

	hsusb1phy_pins: pinmux_hsusb1phy_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
		>;
	};

	w2cbw0015_pins: pinmux_w2cbw0015_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c4_pins: pinmux_i2c4_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
		>;
	};

	mmc1_pins: pinmux_mmc1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
		>;
	};

	mmc5_pins: pinmux_mmc5_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_dat0 */
			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1 */
			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2 */
			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3 */
		>;
	};
};

/* PMIC */
&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <400000>;

	twl: twl@48 {
		reg = <0x48>;
		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_1N cascaded to gic */
	};

	twl6040: twl@4b {
		compatible = "ti,twl6040";
		#clock-cells = <0>;
		reg = <0x4b>;
		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */

		vio-supply = <&v1v8>;
		v2v1-supply = <&v2v1>;
		enable-active-high;
	};
};

#include "twl6030.dtsi"
#include "twl6030_omap4.dtsi"

/* on-board bluetooth / WiFi module */
&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4_pins>;

	clock-frequency = <400000>;
};

&mcbsp1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcbsp1_pins>;
	status = "okay";
};

&mcpdm {
	pinctrl-names = "default";
	pinctrl-0 = <&mcpdm_pins>;

	clocks = <&twl6040>;
	clock-names = "pdmclk";

	status = "okay";
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;

	vmmc-supply = <&vmmc>;
	ti,bus-width = <4>;
	ti,non-removable;		/* FIXME: use PMIC_MMC detect */
};

&mmc2 {
	status = "disabled";
};

/* mmc3 is available to the expansion board */

&mmc4 {
	status = "disabled";
};

/* on-board WiFi module */
&mmc5 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc5_pins>;

	vmmc-supply = <&w2cbw0015_vmmc>;
	ti,bus-width = <4>;
	ti,non-removable;
	cap-power-off-card;
};

&twl_usb_comparator {
	usb-supply = <&vusb>;
};

&usb_otg_hs {
	interface-type = <1>;
	mode = <3>;
	power = <50>;
};

&usbhshost {
	port1-mode = "ehci-phy";
};

&usbhsehci {
	phys = <&hsusb1_phy>;
};
Commit	Line	Data
5eb9b5e5 FV	1	/*
	2	* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
	8
	9	#include "omap443x.dtsi"
	10
	11	/ {
	12	model = "Gumstix Duovero";
	13	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
	14
bfaa1063 TL	15	chosen {
	16	stdout-path = &uart3;
	17	};
	18
742ae1f9	19	memory@80000000 {
5eb9b5e5 FV	20	device_type = "memory";
	21	reg = <0x80000000 0x40000000>; /* 1 GB */
	22	};
	23
	24	sound {
	25	compatible = "ti,abe-twl6040";
	26	ti,model = "DuoVero";
	27
	28	ti,mclk-freq = <38400000>;
	29
	30	ti,mcpdm = <&mcpdm>;
	31
	32	ti,twl6040 = <&twl6040>;
	33
	34	/* Audio routing */
	35	ti,audio-routing =
	36	"Headset Stereophone", "HSOL",
	37	"Headset Stereophone", "HSOR",
	38	"HSMIC", "Headset Mic",
	39	"Headset Mic", "Headset Mic Bias";
	40	};
	41
	42	/* HS USB Host PHY on PORT 1 */
	43	hsusb1_phy: hsusb1_phy {
	44	compatible = "usb-nop-xceiv";
	45	reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
f568f6f5	46	#phy-cells = <0>;
5eb9b5e5 FV	47
	48	pinctrl-names = "default";
	49	pinctrl-0 = <&hsusb1phy_pins>;
	50
	51	clocks = <&auxclk3_ck>;
	52	clock-names = "main_clk";
	53	clock-frequency = <19200000>;
	54	};
	55
	56	/* regulator for w2cbw0015 on sdio5 */
	57	w2cbw0015_vmmc: w2cbw0015_vmmc {
	58	pinctrl-names = "default";
	59	pinctrl-0 = <&w2cbw0015_pins>;
	60	compatible = "regulator-fixed";
	61	regulator-name = "w2cbw0015";
	62	regulator-min-microvolt = <3000000>;
	63	regulator-max-microvolt = <3000000>;
	64	gpio = <&gpio2 11 GPIO_ACTIVE_LOW>; /* gpio_43 */
	65	startup-delay-us = <70000>;
	66	enable-active-high;
	67	regulator-boot-on;
	68	};
	69	};
	70
	71	&omap4_pmx_core {
	72	pinctrl-names = "default";
	73	pinctrl-0 = <
	74	&twl6040_pins
5eb9b5e5 FV	75	&hsusbb1_pins
	76	>;
	77
	78	twl6040_pins: pinmux_twl6040_pins {
	79	pinctrl-single,pins = <
5efa994b JE	80	OMAP4_IOPAD(0x166, PIN_OUTPUT \| MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */
5efa994b JE	81	OMAP4_IOPAD(0x1a0, PIN_INPUT \| MUX_MODE0) /* sys_nirq2.sys_nirq2 */
5eb9b5e5 FV	82	>;
	83	};
	84
	85	mcpdm_pins: pinmux_mcpdm_pins {
	86	pinctrl-single,pins = <
5efa994b JE	87	OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
	88	OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
	89	OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP \| MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
	90	OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
	91	OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_clks.abe_clks */
5eb9b5e5 FV	92	>;
	93	};
	94
	95	mcbsp1_pins: pinmux_mcbsp1_pins {
	96	pinctrl-single,pins = <
5efa994b JE	97	OMAP4_IOPAD(0x0fe, PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
	98	OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
	99	OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
	100	OMAP4_IOPAD(0x104, PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
5eb9b5e5 FV	101	>;
	102	};
	103
	104	hsusbb1_pins: pinmux_hsusbb1_pins {
	105	pinctrl-single,pins = <
5efa994b JE	106	OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
	107	OMAP4_IOPAD(0x0c4, PIN_OUTPUT \| MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
	108	OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
	109	OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
	110	OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
	111	OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
	112	OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
	113	OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
	114	OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
	115	OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
	116	OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
	117	OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
5eb9b5e5 FV	118	>;
	119	};
	120
	121	hsusb1phy_pins: pinmux_hsusb1phy_pins {
	122	pinctrl-single,pins = <
5efa994b	123	OMAP4_IOPAD(0x08c, PIN_OUTPUT \| MUX_MODE3) /* gpmc_wait1.gpio_62 */
5eb9b5e5 FV	124	>;
	125	};
	126
	127	w2cbw0015_pins: pinmux_w2cbw0015_pins {
	128	pinctrl-single,pins = <
5efa994b JE	129	OMAP4_IOPAD(0x066, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a19.gpio_43 */
5efa994b JE	130	OMAP4_IOPAD(0x07a, PIN_INPUT \| MUX_MODE3) /* gpmc_ncs3.gpio_53 */
5eb9b5e5 FV	131	>;
	132	};
	133
	134	i2c1_pins: pinmux_i2c1_pins {
	135	pinctrl-single,pins = <
5efa994b JE	136	OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
5efa994b JE	137	OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
5eb9b5e5 FV	138	>;
	139	};
	140
	141	i2c4_pins: pinmux_i2c4_pins {
	142	pinctrl-single,pins = <
5efa994b JE	143	OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_scl */
5efa994b JE	144	OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_sda */
5eb9b5e5 FV	145	>;
	146	};
	147
	148	mmc1_pins: pinmux_mmc1_pins {
	149	pinctrl-single,pins = <
5efa994b JE	150	OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_clk */
	151	OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmcc1_cmd */
	152	OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmcc1_dat0 */
	153	OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat1 */
	154	OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat2 */
	155	OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc1_dat3 */
5eb9b5e5 FV	156	>;
	157	};
	158
	159	mmc5_pins: pinmux_mmc5_pins {
	160	pinctrl-single,pins = <
5efa994b JE	161	OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_clk */
	162	OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmcc5_cmd */
	163	OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmcc5_dat0 */
	164	OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat1 */
	165	OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat2 */
	166	OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat3 */
5eb9b5e5 FV	167	>;
	168	};
	169	};
	170
	171	/* PMIC */
	172	&i2c1 {
	173	pinctrl-names = "default";
	174	pinctrl-0 = <&i2c1_pins>;
	175
	176	clock-frequency = <400000>;
	177
	178	twl: twl@48 {
	179	reg = <0x48>;
	180	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
5eb9b5e5 FV	181	};
	182
	183	twl6040: twl@4b {
	184	compatible = "ti,twl6040";
d471c277	185	#clock-cells = <0>;
5eb9b5e5 FV	186	reg = <0x4b>;
5eb9b5e5 FV	187	interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
5eb9b5e5 FV	188	ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */
	189
	190	vio-supply = <&v1v8>;
	191	v2v1-supply = <&v2v1>;
	192	enable-active-high;
	193	};
	194	};
	195
	196	#include "twl6030.dtsi"
	197	#include "twl6030_omap4.dtsi"
	198
	199	/* on-board bluetooth / WiFi module */
	200	&i2c4 {
	201	pinctrl-names = "default";
	202	pinctrl-0 = <&i2c4_pins>;
	203
	204	clock-frequency = <400000>;
	205	};
	206
d712ff63 JE	207	&mcbsp1 {
	208	pinctrl-names = "default";
	209	pinctrl-0 = <&mcbsp1_pins>;
	210	status = "okay";
	211	};
	212
	213	&mcpdm {
	214	pinctrl-names = "default";
	215	pinctrl-0 = <&mcpdm_pins>;
d471c277 PU	216
	217	clocks = <&twl6040>;
	218	clock-names = "pdmclk";
	219
d712ff63 JE	220	status = "okay";
	221	};
	222
5eb9b5e5 FV	223	&mmc1 {
	224	pinctrl-names = "default";
	225	pinctrl-0 = <&mmc1_pins>;
	226
	227	vmmc-supply = <&vmmc>;
	228	ti,bus-width = <4>;
	229	ti,non-removable; /* FIXME: use PMIC_MMC detect */
	230	};
	231
	232	&mmc2 {
	233	status = "disabled";
	234	};
	235
	236	/* mmc3 is available to the expansion board */
	237
	238	&mmc4 {
	239	status = "disabled";
	240	};
	241
	242	/* on-board WiFi module */
	243	&mmc5 {
	244	pinctrl-names = "default";
	245	pinctrl-0 = <&mmc5_pins>;
	246
	247	vmmc-supply = <&w2cbw0015_vmmc>;
	248	ti,bus-width = <4>;
	249	ti,non-removable;
	250	cap-power-off-card;
	251	};
	252
	253	&twl_usb_comparator {
	254	usb-supply = <&vusb>;
	255	};
	256
	257	&usb_otg_hs {
	258	interface-type = <1>;
	259	mode = <3>;
	260	power = <50>;
	261	};
	262
	263	&usbhshost {
	264	port1-mode = "ehci-phy";
	265	};
	266
	267	&usbhsehci {
	268	phys = <&hsusb1_phy>;
	269	};
	270