[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / omap4-panda-common.dtsi

/*
 * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <dt-bindings/input/input.h>
#include "elpida_ecb240abacn.dtsi"

/ {
	memory@80000000 {
		device_type = "memory";
		reg = <0x80000000 0x40000000>; /* 1 GB */
	};

	chosen {
		stdout-path = &uart3;
	};

	aliases {
		display0 = &dvi0;
		display1 = &hdmi0;
		ethernet = &ethernet;
	};

	leds: leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <
			&led_wkgpio_pins
		>;

		heartbeat {
			label = "pandaboard::status1";
			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};

		mmc {
			label = "pandaboard::status2";
			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc0";
		};
	};

	gpio_keys: gpio_keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <
			&button_pins
		>;

		buttonS2 {
			label = "button S2";
			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
			linux,code = <BTN_0>;
			wakeup-source;
		};
	};

	sound: sound {
		compatible = "ti,abe-twl6040";
		ti,model = "PandaBoard";

		ti,mclk-freq = <38400000>;

		ti,mcpdm = <&mcpdm>;

		ti,twl6040 = <&twl6040>;

		/* Audio routing */
		ti,audio-routing =
			"Headset Stereophone", "HSOL",
			"Headset Stereophone", "HSOR",
			"Ext Spk", "HFL",
			"Ext Spk", "HFR",
			"Line Out", "AUXL",
			"Line Out", "AUXR",
			"HSMIC", "Headset Mic",
			"Headset Mic", "Headset Mic Bias",
			"AFML", "Line In",
			"AFMR", "Line In";
	};

	/* HS USB Port 1 Power */
	hsusb1_power: hsusb1_power_reg {
		compatible = "regulator-fixed";
		regulator-name = "hsusb1_vbus";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
		startup-delay-us = <70000>;
		enable-active-high;
		/*
		 * boot-on is required along with always-on as the
		 * regulator framework doesn't enable the regulator
		 * if boot-on is not there.
		 */
		regulator-always-on;
		regulator-boot-on;
	};

	/* HS USB Host PHY on PORT 1 */
	hsusb1_phy: hsusb1_phy {
		compatible = "usb-nop-xceiv";
		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
		#phy-cells = <0>;
		vcc-supply = <&hsusb1_power>;
		clocks = <&auxclk3_ck>;
		clock-names = "main_clk";
		clock-frequency = <19200000>;
	};

	/* regulator for wl12xx on sdio5 */
	wl12xx_vmmc: wl12xx_vmmc {
		pinctrl-names = "default";
		pinctrl-0 = <&wl12xx_gpio>;
		compatible = "regulator-fixed";
		regulator-name = "vwl1271";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <70000>;
		enable-active-high;
	};

	tfp410: encoder0 {
		compatible = "ti,tfp410";
		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tfp410_in: endpoint {
					remote-endpoint = <&dpi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tfp410_out: endpoint {
					remote-endpoint = <&dvi_connector_in>;
				};
			};
		};
	};

	dvi0: connector0 {
		compatible = "dvi-connector";
		label = "dvi";

		digital;

		ddc-i2c-bus = <&i2c3>;

		port {
			dvi_connector_in: endpoint {
				remote-endpoint = <&tfp410_out>;
			};
		};
	};

	tpd12s015: encoder1 {
		compatible = "ti,tpd12s015";

		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tpd12s015_in: endpoint {
					remote-endpoint = <&hdmi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tpd12s015_out: endpoint {
					remote-endpoint = <&hdmi_connector_in>;
				};
			};
		};
	};

	hdmi0: connector1 {
		compatible = "hdmi-connector";
		label = "hdmi";

		type = "a";

		port {
			hdmi_connector_in: endpoint {
				remote-endpoint = <&tpd12s015_out>;
			};
		};
	};
};

&omap4_pmx_core {
	pinctrl-names = "default";
	pinctrl-0 = <
			&dss_dpi_pins
			&tfp410_pins
			&dss_hdmi_pins
			&tpd12s015_pins
			&hsusbb1_pins
	>;

	twl6040_pins: pinmux_twl6040_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
		>;
	};

	mcpdm_pins: pinmux_mcpdm_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
		>;
	};

	mcbsp1_pins: pinmux_mcbsp1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
		>;
	};

	dss_dpi_pins: pinmux_dss_dpi_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */

			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */

			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
		>;
	};

	tfp410_pins: pinmux_tfp410_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
		>;
	};

	dss_hdmi_pins: pinmux_dss_hdmi_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)		/* hdmi_cec.hdmi_cec */
			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
		>;
	};

	tpd12s015_pins: pinmux_tpd12s015_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
		>;
	};

	hsusbb1_pins: pinmux_hsusbb1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
		>;
	};

	i2c2_pins: pinmux_i2c2_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
		>;
	};

	i2c4_pins: pinmux_i2c4_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
		>;
	};

	/*
	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
	 */
	wl12xx_gpio: pinmux_wl12xx_gpio {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
		>;
	};

	/* wl12xx GPIO inputs and SDIO pins */
	wl12xx_pins: pinmux_wl12xx_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
		>;
	};

	button_pins: pinmux_button_pins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
		>;
	};
};

&omap4_pmx_wkup {
	led_wkgpio_pins: pinmux_leds_wkpins {
		pinctrl-single,pins = <
			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
		>;
	};
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <400000>;

	twl: twl@48 {
		reg = <0x48>;
		/* IRQ# = 7 */
		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
	};

	twl6040: twl@4b {
		compatible = "ti,twl6040";
		#clock-cells = <0>;
		reg = <0x4b>;

		pinctrl-names = "default";
		pinctrl-0 = <&twl6040_pins>;

		/* IRQ# = 119 */
		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */

		vio-supply = <&v1v8>;
		v2v1-supply = <&v2v1>;
		enable-active-high;
	};
};

#include "twl6030.dtsi"
#include "twl6030_omap4.dtsi"

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c2_pins>;

	clock-frequency = <400000>;
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <100000>;

	/*
	 * Display monitor features are burnt in their EEPROM as EDID data.
	 * The EEPROM is connected as I2C slave device.
	 */
	eeprom@50 {
		compatible = "ti,eeprom";
		reg = <0x50>;
	};
};

&i2c4 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c4_pins>;

	clock-frequency = <400000>;
};

&mmc1 {
	vmmc-supply = <&vmmc>;
	bus-width = <8>;
};

&mmc2 {
	status = "disabled";
};

&mmc3 {
	status = "disabled";
};

&mmc4 {
	status = "disabled";
};

&mmc5 {
	pinctrl-names = "default";
	pinctrl-0 = <&wl12xx_pins>;
	vmmc-supply = <&wl12xx_vmmc>;
	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core 0x10e>;
	non-removable;
	bus-width = <4>;
	cap-power-off-card;

	#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
		compatible = "ti,wl1271";
		reg = <2>;
		interrupt-parent = <&gpio2>;
		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
		ref-clock-frequency = <38400000>;
	};
};

&emif1 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
};

&emif2 {
	cs1-used;
	device-handle = <&elpida_ECB240ABACN>;
};

&mcbsp1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mcbsp1_pins>;
	status = "okay";
};

&mcpdm {
	pinctrl-names = "default";
	pinctrl-0 = <&mcpdm_pins>;

	clocks = <&twl6040>;
	clock-names = "pdmclk";

	status = "okay";
};

&twl_usb_comparator {
	usb-supply = <&vusb>;
};

&uart2 {
	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART2_RX>;
};

&uart3 {
	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART3_RX>;
};

&uart4 {
	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
			       &omap4_pmx_core OMAP4_UART4_RX>;
};

&usb_otg_hs {
	interface-type = <1>;
	mode = <3>;
	power = <50>;
};

&usbhshost {
	port1-mode = "ehci-phy";
};

&usbhsehci {
	phys = <&hsusb1_phy>;

	#address-cells = <1>;
	#size-cells = <0>;

	hub@1 {
		compatible = "usb424,9514";
		reg = <1>;
		#address-cells = <1>;
		#size-cells = <0>;

		ethernet: usbether@1 {
			compatible = "usb424,ec00";
			reg = <1>;
		};
	};
};

&dss {
	status = "ok";

	port {
		dpi_out: endpoint {
			remote-endpoint = <&tfp410_in>;
			data-lines = <24>;
		};
	};
};

&dsi2 {
	status = "ok";
	vdd-supply = <&vcxio>;
};

&hdmi {
	status = "ok";
	vdda-supply = <&vdac>;

	port {
		hdmi_out: endpoint {
			remote-endpoint = <&tpd12s015_in>;
		};
	};
};
Commit	Line	Data
4b79197c NM	1	/*
	2	* Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
	3	*
	4	* This program is free software; you can redistribute it and/or modify
	5	* it under the terms of the GNU General Public License version 2 as
	6	* published by the Free Software Foundation.
	7	*/
ab9a1366	8	#include <dt-bindings/input/input.h>
98ef7957	9	#include "elpida_ecb240abacn.dtsi"
4b79197c NM	10
4b79197c NM	11	/ {
742ae1f9	12	memory@80000000 {
4b79197c NM	13	device_type = "memory";
	14	reg = <0x80000000 0x40000000>; /* 1 GB */
	15	};
	16
1ed25e1a TL	17	chosen {
	18	stdout-path = &uart3;
	19	};
	20
661637ca TV	21	aliases {
	22	display0 = &dvi0;
	23	display1 = &hdmi0;
879a29e3	24	ethernet = &ethernet;
661637ca TV	25	};
661637ca TV	26
3818d7ca	27	leds: leds {
4b79197c	28	compatible = "gpio-leds";
3818d7ca DM	29	pinctrl-names = "default";
	30	pinctrl-0 = <
	31	&led_wkgpio_pins
	32	>;
	33
4b79197c NM	34	heartbeat {
4b79197c NM	35	label = "pandaboard::status1";
6d624eab	36	gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
4b79197c NM	37	linux,default-trigger = "heartbeat";
	38	};
	39
	40	mmc {
	41	label = "pandaboard::status2";
6d624eab	42	gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
4b79197c NM	43	linux,default-trigger = "mmc0";
	44	};
	45	};
	46
ab9a1366 PR	47	gpio_keys: gpio_keys {
	48	compatible = "gpio-keys";
	49	pinctrl-names = "default";
	50	pinctrl-0 = <
	51	&button_pins
	52	>;
	53
	54	buttonS2 {
	55	label = "button S2";
	56	gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
	57	linux,code = <BTN_0>;
	58	wakeup-source;
	59	};
	60	};
	61
4b79197c NM	62	sound: sound {
	63	compatible = "ti,abe-twl6040";
	64	ti,model = "PandaBoard";
	65
	66	ti,mclk-freq = <38400000>;
	67
	68	ti,mcpdm = <&mcpdm>;
	69
	70	ti,twl6040 = <&twl6040>;
	71
	72	/* Audio routing */
	73	ti,audio-routing =
	74	"Headset Stereophone", "HSOL",
	75	"Headset Stereophone", "HSOR",
	76	"Ext Spk", "HFL",
	77	"Ext Spk", "HFR",
	78	"Line Out", "AUXL",
	79	"Line Out", "AUXR",
	80	"HSMIC", "Headset Mic",
	81	"Headset Mic", "Headset Mic Bias",
	82	"AFML", "Line In",
	83	"AFMR", "Line In";
	84	};
5bd2100e	85
5bd2100e RQ	86	/* HS USB Port 1 Power */
	87	hsusb1_power: hsusb1_power_reg {
	88	compatible = "regulator-fixed";
	89	regulator-name = "hsusb1_vbus";
	90	regulator-min-microvolt = <3300000>;
	91	regulator-max-microvolt = <3300000>;
3a637e00	92	gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
5bd2100e RQ	93	startup-delay-us = <70000>;
5bd2100e RQ	94	enable-active-high;
6f569293 RQ	95	/*
	96	* boot-on is required along with always-on as the
	97	* regulator framework doesn't enable the regulator
	98	* if boot-on is not there.
	99	*/
	100	regulator-always-on;
	101	regulator-boot-on;
5bd2100e RQ	102	};
	103
	104	/* HS USB Host PHY on PORT 1 */
	105	hsusb1_phy: hsusb1_phy {
	106	compatible = "usb-nop-xceiv";
4cbdc86d	107	reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
f568f6f5	108	#phy-cells = <0>;
5bd2100e	109	vcc-supply = <&hsusb1_power>;
2ecf8aa1 RQ	110	clocks = <&auxclk3_ck>;
2ecf8aa1 RQ	111	clock-names = "main_clk";
5bd2100e RQ	112	clock-frequency = <19200000>;
5bd2100e RQ	113	};
851320e3 TL	114
	115	/* regulator for wl12xx on sdio5 */
	116	wl12xx_vmmc: wl12xx_vmmc {
	117	pinctrl-names = "default";
	118	pinctrl-0 = <&wl12xx_gpio>;
	119	compatible = "regulator-fixed";
	120	regulator-name = "vwl1271";
	121	regulator-min-microvolt = <1800000>;
	122	regulator-max-microvolt = <1800000>;
3a637e00	123	gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
851320e3 TL	124	startup-delay-us = <70000>;
	125	enable-active-high;
	126	};
661637ca	127
9e19d0d1	128	tfp410: encoder0 {
661637ca TV	129	compatible = "ti,tfp410";
	130	powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
	131
	132	ports {
	133	#address-cells = <1>;
	134	#size-cells = <0>;
	135
	136	port@0 {
	137	reg = <0>;
	138
9e19d0d1	139	tfp410_in: endpoint {
661637ca TV	140	remote-endpoint = <&dpi_out>;
	141	};
	142	};
	143
	144	port@1 {
	145	reg = <1>;
	146
9e19d0d1	147	tfp410_out: endpoint {
661637ca TV	148	remote-endpoint = <&dvi_connector_in>;
	149	};
	150	};
	151	};
	152	};
	153
9e19d0d1	154	dvi0: connector0 {
661637ca TV	155	compatible = "dvi-connector";
	156	label = "dvi";
	157
	158	digital;
	159
	160	ddc-i2c-bus = <&i2c3>;
	161
	162	port {
	163	dvi_connector_in: endpoint {
	164	remote-endpoint = <&tfp410_out>;
	165	};
	166	};
	167	};
	168
9e19d0d1	169	tpd12s015: encoder1 {
661637ca TV	170	compatible = "ti,tpd12s015";
	171
	172	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
	173	<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
	174	<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
	175
	176	ports {
	177	#address-cells = <1>;
	178	#size-cells = <0>;
	179
	180	port@0 {
	181	reg = <0>;
	182
9e19d0d1	183	tpd12s015_in: endpoint {
661637ca TV	184	remote-endpoint = <&hdmi_out>;
	185	};
	186	};
	187
	188	port@1 {
	189	reg = <1>;
	190
9e19d0d1	191	tpd12s015_out: endpoint {
661637ca TV	192	remote-endpoint = <&hdmi_connector_in>;
	193	};
	194	};
	195	};
	196	};
	197
9e19d0d1	198	hdmi0: connector1 {
661637ca TV	199	compatible = "hdmi-connector";
	200	label = "hdmi";
	201
	202	type = "a";
	203
	204	port {
	205	hdmi_connector_in: endpoint {
	206	remote-endpoint = <&tpd12s015_out>;
	207	};
	208	};
	209	};
4b79197c NM	210	};
	211
	212	&omap4_pmx_core {
	213	pinctrl-names = "default";
	214	pinctrl-0 = <
0352bd1f TV	215	&dss_dpi_pins
0352bd1f TV	216	&tfp410_pins
4b79197c NM	217	&dss_hdmi_pins
4b79197c NM	218	&tpd12s015_pins
5bd2100e	219	&hsusbb1_pins
4b79197c NM	220	>;
	221
	222	twl6040_pins: pinmux_twl6040_pins {
	223	pinctrl-single,pins = <
0e3ae328 JMC	224	OMAP4_IOPAD(0x120, PIN_OUTPUT \| MUX_MODE3) /* hdq_sio.gpio_127 */
0e3ae328 JMC	225	OMAP4_IOPAD(0x1a0, PIN_INPUT \| MUX_MODE0) /* sys_nirq2.sys_nirq2 */
4b79197c NM	226	>;
	227	};
	228
	229	mcpdm_pins: pinmux_mcpdm_pins {
	230	pinctrl-single,pins = <
0e3ae328 JMC	231	OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
	232	OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
	233	OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP \| MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
	234	OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
	235	OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_clks.abe_clks */
4b79197c NM	236	>;
	237	};
	238
	239	mcbsp1_pins: pinmux_mcbsp1_pins {
	240	pinctrl-single,pins = <
0e3ae328 JMC	241	OMAP4_IOPAD(0x0fe, PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
	242	OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
	243	OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN \| MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
	244	OMAP4_IOPAD(0x104, PIN_INPUT \| MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
4b79197c NM	245	>;
	246	};
	247
0352bd1f TV	248	dss_dpi_pins: pinmux_dss_dpi_pins {
0352bd1f TV	249	pinctrl-single,pins = <
0e3ae328 JMC	250	OMAP4_IOPAD(0x162, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data23 */
	251	OMAP4_IOPAD(0x164, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data22 */
	252	OMAP4_IOPAD(0x166, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data21 */
	253	OMAP4_IOPAD(0x168, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data20 */
	254	OMAP4_IOPAD(0x16a, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data19 */
	255	OMAP4_IOPAD(0x16c, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data18 */
	256	OMAP4_IOPAD(0x16e, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data15 */
	257	OMAP4_IOPAD(0x170, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data14 */
	258	OMAP4_IOPAD(0x172, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data13 */
	259	OMAP4_IOPAD(0x174, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data12 */
	260	OMAP4_IOPAD(0x176, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data11 */
	261
	262	OMAP4_IOPAD(0x1b4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data10 */
	263	OMAP4_IOPAD(0x1b6, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data9 */
	264	OMAP4_IOPAD(0x1b8, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data16 */
	265	OMAP4_IOPAD(0x1ba, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data17 */
	266	OMAP4_IOPAD(0x1bc, PIN_OUTPUT \| MUX_MODE5) /* dispc2_hsync */
	267	OMAP4_IOPAD(0x1be, PIN_OUTPUT \| MUX_MODE5) /* dispc2_pclk */
	268	OMAP4_IOPAD(0x1c0, PIN_OUTPUT \| MUX_MODE5) /* dispc2_vsync */
	269	OMAP4_IOPAD(0x1c2, PIN_OUTPUT \| MUX_MODE5) /* dispc2_de */
	270	OMAP4_IOPAD(0x1c4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data8 */
	271	OMAP4_IOPAD(0x1c6, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data7 */
	272	OMAP4_IOPAD(0x1c8, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data6 */
	273	OMAP4_IOPAD(0x1ca, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data5 */
	274	OMAP4_IOPAD(0x1cc, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data4 */
	275	OMAP4_IOPAD(0x1ce, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data3 */
	276
	277	OMAP4_IOPAD(0x1d0, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data2 */
	278	OMAP4_IOPAD(0x1d2, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data1 */
	279	OMAP4_IOPAD(0x1d4, PIN_OUTPUT \| MUX_MODE5) /* dispc2_data0 */
0352bd1f TV	280	>;
	281	};
	282
	283	tfp410_pins: pinmux_tfp410_pins {
	284	pinctrl-single,pins = <
0e3ae328	285	OMAP4_IOPAD(0x184, PIN_OUTPUT \| MUX_MODE3) /* gpio_0 */
0352bd1f TV	286	>;
	287	};
	288
4b79197c NM	289	dss_hdmi_pins: pinmux_dss_hdmi_pins {
4b79197c NM	290	pinctrl-single,pins = <
3a8ed20d	291	OMAP4_IOPAD(0x09a, PIN_INPUT \| MUX_MODE0) /* hdmi_cec.hdmi_cec */
0e3ae328 JMC	292	OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_scl.hdmi_scl */
0e3ae328 JMC	293	OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP \| MUX_MODE0) /* hdmi_sda.hdmi_sda */
4b79197c NM	294	>;
	295	};
	296
	297	tpd12s015_pins: pinmux_tpd12s015_pins {
	298	pinctrl-single,pins = <
0e3ae328 JMC	299	OMAP4_IOPAD(0x062, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a17.gpio_41 */
	300	OMAP4_IOPAD(0x088, PIN_OUTPUT \| MUX_MODE3) /* gpmc_nbe1.gpio_60 */
	301	OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* hdmi_hpd.gpio_63 */
4b79197c NM	302	>;
	303	};
	304
5bd2100e RQ	305	hsusbb1_pins: pinmux_hsusbb1_pins {
5bd2100e RQ	306	pinctrl-single,pins = <
0e3ae328 JMC	307	OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
	308	OMAP4_IOPAD(0x0c4, PIN_OUTPUT \| MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
	309	OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
	310	OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
	311	OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
	312	OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
	313	OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
	314	OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
	315	OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
	316	OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
	317	OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
	318	OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN \| MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
5bd2100e RQ	319	>;
	320	};
	321
4b79197c NM	322	i2c1_pins: pinmux_i2c1_pins {
4b79197c NM	323	pinctrl-single,pins = <
0e3ae328 JMC	324	OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_scl */
0e3ae328 JMC	325	OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c1_sda */
4b79197c NM	326	>;
	327	};
	328
	329	i2c2_pins: pinmux_i2c2_pins {
	330	pinctrl-single,pins = <
0e3ae328 JMC	331	OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_scl */
0e3ae328 JMC	332	OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c2_sda */
4b79197c NM	333	>;
	334	};
	335
	336	i2c3_pins: pinmux_i2c3_pins {
	337	pinctrl-single,pins = <
0e3ae328 JMC	338	OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_scl */
0e3ae328 JMC	339	OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c3_sda */
4b79197c NM	340	>;
	341	};
	342
	343	i2c4_pins: pinmux_i2c4_pins {
	344	pinctrl-single,pins = <
0e3ae328 JMC	345	OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_scl */
0e3ae328 JMC	346	OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP \| MUX_MODE0) /* i2c4_sda */
4b79197c NM	347	>;
4b79197c NM	348	};
851320e3 TL	349
	350	/*
	351	* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
	352	* REVISIT: Are the pull-ups needed for GPIO 48 and 49?
	353	*/
	354	wl12xx_gpio: pinmux_wl12xx_gpio {
	355	pinctrl-single,pins = <
0e3ae328 JMC	356	OMAP4_IOPAD(0x066, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a19.gpio_43 */
	357	OMAP4_IOPAD(0x06c, PIN_OUTPUT \| MUX_MODE3) /* gpmc_a22.gpio_46 */
	358	OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP \| MUX_MODE3) /* gpmc_a24.gpio_48 */
	359	OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP \| MUX_MODE3) /* gpmc_a25.gpio_49 */
851320e3 TL	360	>;
	361	};
	362
	363	/* wl12xx GPIO inputs and SDIO pins */
	364	wl12xx_pins: pinmux_wl12xx_pins {
	365	pinctrl-single,pins = <
0e3ae328 JMC	366	OMAP4_IOPAD(0x078, PIN_INPUT \| MUX_MODE3) /* gpmc_ncs2.gpio_52 */
	367	OMAP4_IOPAD(0x07a, PIN_INPUT \| MUX_MODE3) /* gpmc_ncs3.gpio_53 */
	368	OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
	369	OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
	370	OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
	371	OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
	372	OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
	373	OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP \| MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
851320e3 TL	374	>;
851320e3 TL	375	};
ab9a1366 PR	376
	377	button_pins: pinmux_button_pins {
	378	pinctrl-single,pins = <
	379	OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP \| MUX_MODE3) /* gpio_121 */
	380	>;
	381	};
3818d7ca DM	382	};
3818d7ca DM	383
2ba2866f B	384	&omap4_pmx_wkup {
	385	led_wkgpio_pins: pinmux_leds_wkpins {
	386	pinctrl-single,pins = <
0e3ae328 JMC	387	OMAP4_IOPAD(0x05a, PIN_OUTPUT \| MUX_MODE3) /* gpio_wk7 */
0e3ae328 JMC	388	OMAP4_IOPAD(0x05c, PIN_OUTPUT \| MUX_MODE3) /* gpio_wk8 */
2ba2866f B	389	>;
	390	};
	391	};
	392
4b79197c NM	393	&i2c1 {
	394	pinctrl-names = "default";
	395	pinctrl-0 = <&i2c1_pins>;
	396
	397	clock-frequency = <400000>;
	398
	399	twl: twl@48 {
	400	reg = <0x48>;
8fea7d5a FV	401	/* IRQ# = 7 */
8fea7d5a FV	402	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
4b79197c NM	403	};
	404
	405	twl6040: twl@4b {
	406	compatible = "ti,twl6040";
2ab60a38	407	#clock-cells = <0>;
4b79197c	408	reg = <0x4b>;
aa986458 PU	409
	410	pinctrl-names = "default";
	411	pinctrl-0 = <&twl6040_pins>;
	412
8fea7d5a FV	413	/* IRQ# = 119 */
8fea7d5a FV	414	interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
78eb938e	415	ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
4b79197c NM	416
	417	vio-supply = <&v1v8>;
	418	v2v1-supply = <&v2v1>;
	419	enable-active-high;
	420	};
	421	};
	422
98ef7957	423	#include "twl6030.dtsi"
06a9ea5d	424	#include "twl6030_omap4.dtsi"
4b79197c NM	425
	426	&i2c2 {
	427	pinctrl-names = "default";
	428	pinctrl-0 = <&i2c2_pins>;
	429
	430	clock-frequency = <400000>;
	431	};
	432
	433	&i2c3 {
	434	pinctrl-names = "default";
	435	pinctrl-0 = <&i2c3_pins>;
	436
	437	clock-frequency = <100000>;
	438
	439	/*
	440	* Display monitor features are burnt in their EEPROM as EDID data.
	441	* The EEPROM is connected as I2C slave device.
	442	*/
	443	eeprom@50 {
	444	compatible = "ti,eeprom";
	445	reg = <0x50>;
	446	};
	447	};
	448
	449	&i2c4 {
	450	pinctrl-names = "default";
	451	pinctrl-0 = <&i2c4_pins>;
	452
	453	clock-frequency = <400000>;
	454	};
	455
	456	&mmc1 {
	457	vmmc-supply = <&vmmc>;
	458	bus-width = <8>;
	459	};
	460
	461	&mmc2 {
	462	status = "disabled";
	463	};
	464
	465	&mmc3 {
	466	status = "disabled";
	467	};
	468
	469	&mmc4 {
	470	status = "disabled";
	471	};
	472
	473	&mmc5 {
851320e3 TL	474	pinctrl-names = "default";
	475	pinctrl-0 = <&wl12xx_pins>;
	476	vmmc-supply = <&wl12xx_vmmc>;
84ae4974 TL	477	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
84ae4974 TL	478	&omap4_pmx_core 0x10e>;
851320e3	479	non-removable;
4b79197c	480	bus-width = <4>;
851320e3	481	cap-power-off-card;
99f84cae EP	482
	483	#address-cells = <1>;
	484	#size-cells = <0>;
	485	wlcore: wlcore@2 {
	486	compatible = "ti,wl1271";
	487	reg = <2>;
	488	interrupt-parent = <&gpio2>;
572cf7d7	489	interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
99f84cae EP	490	ref-clock-frequency = <38400000>;
99f84cae EP	491	};
4b79197c NM	492	};
	493
	494	&emif1 {
	495	cs1-used;
	496	device-handle = <&elpida_ECB240ABACN>;
	497	};
	498
	499	&emif2 {
	500	cs1-used;
	501	device-handle = <&elpida_ECB240ABACN>;
	502	};
	503
aa986458 PU	504	&mcbsp1 {
	505	pinctrl-names = "default";
	506	pinctrl-0 = <&mcbsp1_pins>;
	507	status = "okay";
	508	};
	509
aa986458 PU	510	&mcpdm {
	511	pinctrl-names = "default";
	512	pinctrl-0 = <&mcpdm_pins>;
2ab60a38 PU	513
	514	clocks = <&twl6040>;
	515	clock-names = "pdmclk";
	516
aa986458 PU	517	status = "okay";
	518	};
	519
4b79197c NM	520	&twl_usb_comparator {
	521	usb-supply = <&vusb>;
	522	};
	523
31f0820a	524	&uart2 {
7136d457	525	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	526	&omap4_pmx_core OMAP4_UART2_RX>;
	527	};
	528
	529	&uart3 {
7136d457	530	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	531	&omap4_pmx_core OMAP4_UART3_RX>;
	532	};
	533
	534	&uart4 {
7136d457	535	interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
31f0820a TL	536	&omap4_pmx_core OMAP4_UART4_RX>;
	537	};
	538
4b79197c NM	539	&usb_otg_hs {
	540	interface-type = <1>;
	541	mode = <3>;
	542	power = <50>;
	543	};
5bd2100e RQ	544
	545	&usbhshost {
	546	port1-mode = "ehci-phy";
	547	};
	548
	549	&usbhsehci {
	550	phys = <&hsusb1_phy>;
879a29e3 TL	551
	552	#address-cells = <1>;
	553	#size-cells = <0>;
	554
	555	hub@1 {
	556	compatible = "usb424,9514";
	557	reg = <1>;
	558	#address-cells = <1>;
	559	#size-cells = <0>;
	560
	561	ethernet: usbether@1 {
	562	compatible = "usb424,ec00";
	563	reg = <1>;
	564	};
	565	};
5bd2100e	566	};
661637ca TV	567
	568	&dss {
	569	status = "ok";
	570
	571	port {
	572	dpi_out: endpoint {
	573	remote-endpoint = <&tfp410_in>;
	574	data-lines = <24>;
	575	};
	576	};
	577	};
	578
	579	&dsi2 {
	580	status = "ok";
	581	vdd-supply = <&vcxio>;
	582	};
	583
	584	&hdmi {
	585	status = "ok";
	586	vdda-supply = <&vdac>;
	587
	588	port {
	589	hdmi_out: endpoint {
	590	remote-endpoint = <&tpd12s015_in>;
	591	};
	592	};
	593	};