]>
Commit | Line | Data |
---|---|---|
492beedf BC |
1 | /* |
2 | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | /dts-v1/; | |
9 | ||
98ef7957 FV |
10 | #include "omap443x.dtsi" |
11 | #include "elpida_ecb240abacn.dtsi" | |
ed01ffd9 | 12 | #include "omap4-mcpdm.dtsi" |
492beedf BC |
13 | |
14 | / { | |
15 | model = "TI OMAP4 SDP board"; | |
16 | compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; | |
17 | ||
742ae1f9 | 18 | memory@80000000 { |
492beedf BC |
19 | device_type = "memory"; |
20 | reg = <0x80000000 0x40000000>; /* 1 GB */ | |
21 | }; | |
e7c64db9 | 22 | |
7c572d5e TV |
23 | aliases { |
24 | display0 = &lcd0; | |
25 | display1 = &lcd1; | |
26 | display2 = &hdmi0; | |
27 | }; | |
28 | ||
624411ce | 29 | vdd_eth: fixedregulator-vdd-eth { |
b4c30df0 PU |
30 | pinctrl-names = "default"; |
31 | pinctrl-0 = <&enet_enable_gpio>; | |
32 | ||
e7c64db9 BC |
33 | compatible = "regulator-fixed"; |
34 | regulator-name = "VDD_ETH"; | |
35 | regulator-min-microvolt = <3300000>; | |
36 | regulator-max-microvolt = <3300000>; | |
3a637e00 | 37 | gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */ |
e7c64db9 BC |
38 | enable-active-high; |
39 | regulator-boot-on; | |
84fb6c7f | 40 | startup-delay-us = <25000>; |
e7c64db9 | 41 | }; |
83909c73 | 42 | |
624411ce | 43 | vbat: fixedregulator-vbat { |
4814f2f7 PU |
44 | compatible = "regulator-fixed"; |
45 | regulator-name = "VBAT"; | |
46 | regulator-min-microvolt = <3750000>; | |
47 | regulator-max-microvolt = <3750000>; | |
48 | regulator-boot-on; | |
49 | }; | |
50 | ||
83909c73 BC |
51 | leds { |
52 | compatible = "gpio-leds"; | |
53 | debug0 { | |
54 | label = "omap4:green:debug0"; | |
6d624eab | 55 | gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */ |
83909c73 BC |
56 | }; |
57 | ||
58 | debug1 { | |
59 | label = "omap4:green:debug1"; | |
6d624eab | 60 | gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */ |
83909c73 BC |
61 | }; |
62 | ||
63 | debug2 { | |
64 | label = "omap4:green:debug2"; | |
6d624eab | 65 | gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */ |
83909c73 BC |
66 | }; |
67 | ||
68 | debug3 { | |
69 | label = "omap4:green:debug3"; | |
6d624eab | 70 | gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */ |
83909c73 BC |
71 | }; |
72 | ||
73 | debug4 { | |
74 | label = "omap4:green:debug4"; | |
6d624eab | 75 | gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */ |
83909c73 BC |
76 | }; |
77 | ||
78 | user1 { | |
79 | label = "omap4:blue:user"; | |
6d624eab | 80 | gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */ |
83909c73 BC |
81 | }; |
82 | ||
83 | user2 { | |
84 | label = "omap4:red:user"; | |
6d624eab | 85 | gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */ |
83909c73 BC |
86 | }; |
87 | ||
88 | user3 { | |
89 | label = "omap4:green:user"; | |
6d624eab | 90 | gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */ |
83909c73 BC |
91 | }; |
92 | }; | |
b15bb2c0 | 93 | |
28f166cb PU |
94 | pwmleds { |
95 | compatible = "pwm-leds"; | |
96 | kpad { | |
97 | label = "omap4::keypad"; | |
98 | pwms = <&twl_pwm 0 7812500>; | |
99 | max-brightness = <127>; | |
100 | }; | |
101 | ||
102 | charging { | |
103 | label = "omap4:green:chrg"; | |
104 | pwms = <&twl_pwmled 0 7812500>; | |
105 | max-brightness = <255>; | |
106 | }; | |
107 | }; | |
108 | ||
f95c01df PU |
109 | backlight { |
110 | compatible = "pwm-backlight"; | |
111 | pwms = <&twl_pwm 1 7812500>; | |
112 | brightness-levels = < | |
113 | 0 10 20 30 40 | |
114 | 50 60 70 80 90 | |
115 | 100 110 120 127 | |
116 | >; | |
117 | default-brightness-level = <13>; | |
118 | }; | |
119 | ||
b15bb2c0 PU |
120 | sound { |
121 | compatible = "ti,abe-twl6040"; | |
122 | ti,model = "SDP4430"; | |
123 | ||
124 | ti,jack-detection = <1>; | |
125 | ti,mclk-freq = <38400000>; | |
126 | ||
127 | ti,mcpdm = <&mcpdm>; | |
128 | ti,dmic = <&dmic>; | |
129 | ||
130 | ti,twl6040 = <&twl6040>; | |
131 | ||
132 | /* Audio routing */ | |
133 | ti,audio-routing = | |
134 | "Headset Stereophone", "HSOL", | |
135 | "Headset Stereophone", "HSOR", | |
136 | "Earphone Spk", "EP", | |
137 | "Ext Spk", "HFL", | |
138 | "Ext Spk", "HFR", | |
139 | "Line Out", "AUXL", | |
140 | "Line Out", "AUXR", | |
141 | "Vibrator", "VIBRAL", | |
142 | "Vibrator", "VIBRAR", | |
143 | "HSMIC", "Headset Mic", | |
144 | "Headset Mic", "Headset Mic Bias", | |
145 | "MAINMIC", "Main Handset Mic", | |
146 | "Main Handset Mic", "Main Mic Bias", | |
147 | "SUBMIC", "Sub Handset Mic", | |
148 | "Sub Handset Mic", "Main Mic Bias", | |
149 | "AFML", "Line In", | |
150 | "AFMR", "Line In", | |
151 | "DMic", "Digital Mic", | |
152 | "Digital Mic", "Digital Mic1 Bias"; | |
153 | }; | |
775d2418 TL |
154 | |
155 | /* regulator for wl12xx on sdio5 */ | |
156 | wl12xx_vmmc: wl12xx_vmmc { | |
157 | pinctrl-names = "default"; | |
158 | pinctrl-0 = <&wl12xx_gpio>; | |
159 | compatible = "regulator-fixed"; | |
160 | regulator-name = "vwl1271"; | |
161 | regulator-min-microvolt = <1800000>; | |
162 | regulator-max-microvolt = <1800000>; | |
3a637e00 | 163 | gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; |
775d2418 TL |
164 | startup-delay-us = <70000>; |
165 | enable-active-high; | |
166 | }; | |
7c572d5e | 167 | |
f9a1017a | 168 | tpd12s015: encoder { |
7c572d5e TV |
169 | compatible = "ti,tpd12s015"; |
170 | ||
171 | gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ | |
172 | <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ | |
173 | <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ | |
174 | ||
175 | ports { | |
176 | #address-cells = <1>; | |
177 | #size-cells = <0>; | |
178 | ||
179 | port@0 { | |
180 | reg = <0>; | |
181 | ||
f9a1017a | 182 | tpd12s015_in: endpoint { |
7c572d5e TV |
183 | remote-endpoint = <&hdmi_out>; |
184 | }; | |
185 | }; | |
186 | ||
187 | port@1 { | |
188 | reg = <1>; | |
189 | ||
f9a1017a | 190 | tpd12s015_out: endpoint { |
7c572d5e TV |
191 | remote-endpoint = <&hdmi_connector_in>; |
192 | }; | |
193 | }; | |
194 | }; | |
195 | }; | |
196 | ||
f9a1017a | 197 | hdmi0: connector { |
7c572d5e TV |
198 | compatible = "hdmi-connector"; |
199 | label = "hdmi"; | |
200 | ||
201 | type = "c"; | |
202 | ||
203 | port { | |
204 | hdmi_connector_in: endpoint { | |
205 | remote-endpoint = <&tpd12s015_out>; | |
206 | }; | |
207 | }; | |
208 | }; | |
492beedf | 209 | }; |
33632ae7 | 210 | |
26638c66 | 211 | &omap4_pmx_core { |
08386feb PU |
212 | pinctrl-names = "default"; |
213 | pinctrl-0 = < | |
347bf48f RN |
214 | &dss_hdmi_pins |
215 | &tpd12s015_pins | |
08386feb PU |
216 | >; |
217 | ||
26638c66 TL |
218 | uart2_pins: pinmux_uart2_pins { |
219 | pinctrl-single,pins = < | |
b6bf441e JMC |
220 | OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ |
221 | OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ | |
222 | OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ | |
223 | OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ | |
26638c66 TL |
224 | >; |
225 | }; | |
226 | ||
227 | uart3_pins: pinmux_uart3_pins { | |
228 | pinctrl-single,pins = < | |
b6bf441e JMC |
229 | OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ |
230 | OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ | |
231 | OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ | |
232 | OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ | |
26638c66 TL |
233 | >; |
234 | }; | |
235 | ||
236 | uart4_pins: pinmux_uart4_pins { | |
237 | pinctrl-single,pins = < | |
b6bf441e JMC |
238 | OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ |
239 | OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ | |
26638c66 TL |
240 | >; |
241 | }; | |
08386feb PU |
242 | |
243 | twl6040_pins: pinmux_twl6040_pins { | |
244 | pinctrl-single,pins = < | |
b6bf441e JMC |
245 | OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ |
246 | OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ | |
08386feb PU |
247 | >; |
248 | }; | |
249 | ||
08386feb PU |
250 | dmic_pins: pinmux_dmic_pins { |
251 | pinctrl-single,pins = < | |
b6bf441e JMC |
252 | OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ |
253 | OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ | |
254 | OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */ | |
255 | OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */ | |
08386feb PU |
256 | >; |
257 | }; | |
258 | ||
259 | mcbsp1_pins: pinmux_mcbsp1_pins { | |
260 | pinctrl-single,pins = < | |
b6bf441e JMC |
261 | OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ |
262 | OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ | |
263 | OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ | |
264 | OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ | |
08386feb PU |
265 | >; |
266 | }; | |
267 | ||
268 | mcbsp2_pins: pinmux_mcbsp2_pins { | |
269 | pinctrl-single,pins = < | |
b6bf441e JMC |
270 | OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ |
271 | OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ | |
272 | OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */ | |
273 | OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */ | |
08386feb PU |
274 | >; |
275 | }; | |
347bf48f | 276 | |
d5a2b34f TL |
277 | mcspi1_pins: pinmux_mcspi1_pins { |
278 | pinctrl-single,pins = < | |
b6bf441e JMC |
279 | OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ |
280 | OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ | |
281 | OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ | |
282 | OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ | |
d5a2b34f TL |
283 | >; |
284 | }; | |
285 | ||
347bf48f RN |
286 | dss_hdmi_pins: pinmux_dss_hdmi_pins { |
287 | pinctrl-single,pins = < | |
3a8ed20d | 288 | OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ |
b6bf441e JMC |
289 | OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ |
290 | OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ | |
347bf48f RN |
291 | >; |
292 | }; | |
293 | ||
294 | tpd12s015_pins: pinmux_tpd12s015_pins { | |
295 | pinctrl-single,pins = < | |
b6bf441e JMC |
296 | OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ |
297 | OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ | |
298 | OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ | |
347bf48f RN |
299 | >; |
300 | }; | |
be26cd6d SP |
301 | |
302 | i2c1_pins: pinmux_i2c1_pins { | |
303 | pinctrl-single,pins = < | |
b6bf441e JMC |
304 | OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
305 | OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ | |
be26cd6d SP |
306 | >; |
307 | }; | |
308 | ||
309 | i2c2_pins: pinmux_i2c2_pins { | |
310 | pinctrl-single,pins = < | |
b6bf441e JMC |
311 | OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ |
312 | OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ | |
be26cd6d SP |
313 | >; |
314 | }; | |
315 | ||
316 | i2c3_pins: pinmux_i2c3_pins { | |
317 | pinctrl-single,pins = < | |
b6bf441e JMC |
318 | OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ |
319 | OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ | |
be26cd6d SP |
320 | >; |
321 | }; | |
322 | ||
323 | i2c4_pins: pinmux_i2c4_pins { | |
324 | pinctrl-single,pins = < | |
b6bf441e JMC |
325 | OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ |
326 | OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ | |
be26cd6d SP |
327 | >; |
328 | }; | |
775d2418 TL |
329 | |
330 | /* wl12xx GPIO output for WLAN_EN */ | |
331 | wl12xx_gpio: pinmux_wl12xx_gpio { | |
332 | pinctrl-single,pins = < | |
b6bf441e | 333 | OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ |
775d2418 TL |
334 | >; |
335 | }; | |
336 | ||
337 | /* wl12xx GPIO inputs and SDIO pins */ | |
338 | wl12xx_pins: pinmux_wl12xx_pins { | |
339 | pinctrl-single,pins = < | |
b6bf441e JMC |
340 | OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ |
341 | OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ | |
342 | OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ | |
343 | OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ | |
344 | OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ | |
345 | OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ | |
346 | OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ | |
775d2418 TL |
347 | >; |
348 | }; | |
b4c30df0 PU |
349 | |
350 | /* gpio_48 for ENET_ENABLE */ | |
351 | enet_enable_gpio: pinmux_enet_enable_gpio { | |
352 | pinctrl-single,pins = < | |
353 | OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ | |
354 | >; | |
355 | }; | |
356 | ||
357 | ks8851_pins: pinmux_ks8851_pins { | |
358 | pinctrl-single,pins = < | |
359 | /* ENET_INT */ | |
360 | OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ | |
361 | /* | |
362 | * Misterious pin which makes the ethernet working | |
363 | * The legacy board file requested this pin on boot | |
364 | * (ETH_KS8851_QUART) and set it to high, similarly to | |
365 | * the ENET_ENABLE pin. | |
366 | * We could use gpio-hog to keep it high, but let's use | |
367 | * it as a reset GPIO for ks8851. | |
368 | */ | |
369 | OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */ | |
370 | >; | |
371 | }; | |
26638c66 TL |
372 | }; |
373 | ||
33632ae7 | 374 | &i2c1 { |
be26cd6d SP |
375 | pinctrl-names = "default"; |
376 | pinctrl-0 = <&i2c1_pins>; | |
377 | ||
33632ae7 BC |
378 | clock-frequency = <400000>; |
379 | ||
380 | twl: twl@48 { | |
381 | reg = <0x48>; | |
382 | /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ | |
8fea7d5a | 383 | interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ |
33632ae7 | 384 | }; |
efd2af55 PU |
385 | |
386 | twl6040: twl@4b { | |
387 | compatible = "ti,twl6040"; | |
3cec531b | 388 | #clock-cells = <0>; |
efd2af55 | 389 | reg = <0x4b>; |
c5d75d5a PU |
390 | |
391 | pinctrl-names = "default"; | |
392 | pinctrl-0 = <&twl6040_pins>; | |
393 | ||
efd2af55 | 394 | /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ |
8fea7d5a | 395 | interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ |
3a637e00 | 396 | ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ |
efd2af55 PU |
397 | |
398 | vio-supply = <&v1v8>; | |
399 | v2v1-supply = <&v2v1>; | |
400 | enable-active-high; | |
401 | ||
402 | /* regulators for vibra motor */ | |
403 | vddvibl-supply = <&vbat>; | |
404 | vddvibr-supply = <&vbat>; | |
405 | ||
406 | vibra { | |
407 | /* Vibra driver, motor resistance parameters */ | |
408 | ti,vibldrv-res = <8>; | |
409 | ti,vibrdrv-res = <3>; | |
410 | ti,viblmotor-res = <10>; | |
411 | ti,vibrmotor-res = <10>; | |
412 | }; | |
413 | }; | |
33632ae7 BC |
414 | }; |
415 | ||
98ef7957 | 416 | #include "twl6030.dtsi" |
06a9ea5d | 417 | #include "twl6030_omap4.dtsi" |
33632ae7 BC |
418 | |
419 | &i2c2 { | |
be26cd6d SP |
420 | pinctrl-names = "default"; |
421 | pinctrl-0 = <&i2c2_pins>; | |
422 | ||
33632ae7 BC |
423 | clock-frequency = <400000>; |
424 | }; | |
425 | ||
426 | &i2c3 { | |
be26cd6d SP |
427 | pinctrl-names = "default"; |
428 | pinctrl-0 = <&i2c3_pins>; | |
429 | ||
33632ae7 BC |
430 | clock-frequency = <400000>; |
431 | ||
432 | /* | |
433 | * Temperature Sensor | |
434 | * http://www.ti.com/lit/ds/symlink/tmp105.pdf | |
435 | */ | |
436 | tmp105@48 { | |
437 | compatible = "ti,tmp105"; | |
438 | reg = <0x48>; | |
439 | }; | |
440 | ||
441 | /* | |
442 | * Ambient Light Sensor | |
443 | * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf | |
444 | */ | |
445 | bh1780@29 { | |
446 | compatible = "rohm,bh1780"; | |
447 | reg = <0x29>; | |
448 | }; | |
449 | }; | |
450 | ||
451 | &i2c4 { | |
be26cd6d SP |
452 | pinctrl-names = "default"; |
453 | pinctrl-0 = <&i2c4_pins>; | |
454 | ||
33632ae7 BC |
455 | clock-frequency = <400000>; |
456 | ||
457 | /* | |
458 | * 3-Axis Digital Compass | |
459 | * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf | |
460 | */ | |
461 | hmc5843@1e { | |
462 | compatible = "honeywell,hmc5843"; | |
463 | reg = <0x1e>; | |
464 | }; | |
465 | }; | |
e7c64db9 BC |
466 | |
467 | &mcspi1 { | |
d5a2b34f TL |
468 | pinctrl-names = "default"; |
469 | pinctrl-0 = <&mcspi1_pins>; | |
470 | ||
e7c64db9 | 471 | eth@0 { |
b4c30df0 PU |
472 | pinctrl-names = "default"; |
473 | pinctrl-0 = <&ks8851_pins>; | |
474 | ||
e7c64db9 BC |
475 | compatible = "ks8851"; |
476 | spi-max-frequency = <24000000>; | |
477 | reg = <0>; | |
478 | interrupt-parent = <&gpio2>; | |
8fea7d5a | 479 | interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */ |
e7c64db9 | 480 | vdd-supply = <&vdd_eth>; |
b4c30df0 | 481 | reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; |
e7c64db9 BC |
482 | }; |
483 | }; | |
74981768 RN |
484 | |
485 | &mmc1 { | |
486 | vmmc-supply = <&vmmc>; | |
7f217794 | 487 | bus-width = <8>; |
74981768 RN |
488 | }; |
489 | ||
490 | &mmc2 { | |
491 | vmmc-supply = <&vaux1>; | |
7f217794 | 492 | bus-width = <8>; |
74981768 RN |
493 | ti,non-removable; |
494 | }; | |
495 | ||
496 | &mmc3 { | |
fd5c3fd7 | 497 | status = "disabled"; |
74981768 RN |
498 | }; |
499 | ||
500 | &mmc4 { | |
fd5c3fd7 | 501 | status = "disabled"; |
74981768 RN |
502 | }; |
503 | ||
504 | &mmc5 { | |
775d2418 TL |
505 | pinctrl-names = "default"; |
506 | pinctrl-0 = <&wl12xx_pins>; | |
507 | vmmc-supply = <&wl12xx_vmmc>; | |
508 | non-removable; | |
7f217794 | 509 | bus-width = <4>; |
775d2418 | 510 | cap-power-off-card; |
99f84cae EP |
511 | |
512 | #address-cells = <1>; | |
513 | #size-cells = <0>; | |
514 | wlcore: wlcore@2 { | |
515 | compatible = "ti,wl1281"; | |
516 | reg = <2>; | |
517 | interrupt-parent = <&gpio1>; | |
572cf7d7 | 518 | interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ |
99f84cae EP |
519 | ref-clock-frequency = <26000000>; |
520 | tcxo-clock-frequency = <26000000>; | |
521 | }; | |
74981768 | 522 | }; |
61bc3544 | 523 | |
11c27069 A |
524 | &emif1 { |
525 | cs1-used; | |
526 | device-handle = <&elpida_ECB240ABACN>; | |
527 | }; | |
528 | ||
529 | &emif2 { | |
530 | cs1-used; | |
531 | device-handle = <&elpida_ECB240ABACN>; | |
532 | }; | |
533 | ||
61bc3544 SP |
534 | &keypad { |
535 | keypad,num-rows = <8>; | |
536 | keypad,num-columns = <8>; | |
537 | linux,keymap = <0x00000012 /* KEY_E */ | |
538 | 0x00010013 /* KEY_R */ | |
539 | 0x00020014 /* KEY_T */ | |
540 | 0x00030066 /* KEY_HOME */ | |
541 | 0x0004003f /* KEY_F5 */ | |
542 | 0x000500f0 /* KEY_UNKNOWN */ | |
543 | 0x00060017 /* KEY_I */ | |
544 | 0x0007002a /* KEY_LEFTSHIFT */ | |
545 | 0x01000020 /* KEY_D*/ | |
546 | 0x01010021 /* KEY_F */ | |
547 | 0x01020022 /* KEY_G */ | |
548 | 0x010300e7 /* KEY_SEND */ | |
549 | 0x01040040 /* KEY_F6 */ | |
550 | 0x010500f0 /* KEY_UNKNOWN */ | |
551 | 0x01060025 /* KEY_K */ | |
552 | 0x0107001c /* KEY_ENTER */ | |
553 | 0x0200002d /* KEY_X */ | |
554 | 0x0201002e /* KEY_C */ | |
555 | 0x0202002f /* KEY_V */ | |
556 | 0x0203006b /* KEY_END */ | |
557 | 0x02040041 /* KEY_F7 */ | |
558 | 0x020500f0 /* KEY_UNKNOWN */ | |
559 | 0x02060034 /* KEY_DOT */ | |
560 | 0x0207003a /* KEY_CAPSLOCK */ | |
561 | 0x0300002c /* KEY_Z */ | |
562 | 0x0301004e /* KEY_KPLUS */ | |
563 | 0x03020030 /* KEY_B */ | |
564 | 0x0303003b /* KEY_F1 */ | |
565 | 0x03040042 /* KEY_F8 */ | |
566 | 0x030500f0 /* KEY_UNKNOWN */ | |
567 | 0x03060018 /* KEY_O */ | |
568 | 0x03070039 /* KEY_SPACE */ | |
569 | 0x04000011 /* KEY_W */ | |
570 | 0x04010015 /* KEY_Y */ | |
571 | 0x04020016 /* KEY_U */ | |
572 | 0x0403003c /* KEY_F2 */ | |
573 | 0x04040073 /* KEY_VOLUMEUP */ | |
574 | 0x040500f0 /* KEY_UNKNOWN */ | |
575 | 0x04060026 /* KEY_L */ | |
576 | 0x04070069 /* KEY_LEFT */ | |
577 | 0x0500001f /* KEY_S */ | |
578 | 0x05010023 /* KEY_H */ | |
579 | 0x05020024 /* KEY_J */ | |
580 | 0x0503003d /* KEY_F3 */ | |
581 | 0x05040043 /* KEY_F9 */ | |
582 | 0x05050072 /* KEY_VOLUMEDOWN */ | |
583 | 0x05060032 /* KEY_M */ | |
584 | 0x0507006a /* KEY_RIGHT */ | |
585 | 0x06000010 /* KEY_Q */ | |
586 | 0x0601001e /* KEY_A */ | |
587 | 0x06020031 /* KEY_N */ | |
588 | 0x0603009e /* KEY_BACK */ | |
589 | 0x0604000e /* KEY_BACKSPACE */ | |
590 | 0x060500f0 /* KEY_UNKNOWN */ | |
591 | 0x06060019 /* KEY_P */ | |
592 | 0x06070067 /* KEY_UP */ | |
593 | 0x07000094 /* KEY_PROG1 */ | |
594 | 0x07010095 /* KEY_PROG2 */ | |
595 | 0x070200ca /* KEY_PROG3 */ | |
596 | 0x070300cb /* KEY_PROG4 */ | |
597 | 0x0704003e /* KEY_F4 */ | |
598 | 0x070500f0 /* KEY_UNKNOWN */ | |
599 | 0x07060160 /* KEY_OK */ | |
600 | 0x0707006c>; /* KEY_DOWN */ | |
601 | linux,input-no-autorepeat; | |
602 | }; | |
26638c66 TL |
603 | |
604 | &uart2 { | |
7136d457 | 605 | interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH |
31f0820a | 606 | &omap4_pmx_core OMAP4_UART2_RX>; |
26638c66 TL |
607 | pinctrl-names = "default"; |
608 | pinctrl-0 = <&uart2_pins>; | |
609 | }; | |
610 | ||
611 | &uart3 { | |
7136d457 | 612 | interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH |
31f0820a | 613 | &omap4_pmx_core OMAP4_UART3_RX>; |
26638c66 TL |
614 | pinctrl-names = "default"; |
615 | pinctrl-0 = <&uart3_pins>; | |
616 | }; | |
617 | ||
618 | &uart4 { | |
7136d457 | 619 | interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH |
31f0820a | 620 | &omap4_pmx_core OMAP4_UART4_RX>; |
26638c66 TL |
621 | pinctrl-names = "default"; |
622 | pinctrl-0 = <&uart4_pins>; | |
623 | }; | |
6e659281 | 624 | |
c5d75d5a PU |
625 | &mcbsp1 { |
626 | pinctrl-names = "default"; | |
627 | pinctrl-0 = <&mcbsp1_pins>; | |
628 | status = "okay"; | |
629 | }; | |
630 | ||
631 | &mcbsp2 { | |
632 | pinctrl-names = "default"; | |
633 | pinctrl-0 = <&mcbsp2_pins>; | |
634 | status = "okay"; | |
635 | }; | |
636 | ||
c5d75d5a PU |
637 | &dmic { |
638 | pinctrl-names = "default"; | |
639 | pinctrl-0 = <&dmic_pins>; | |
640 | status = "okay"; | |
641 | }; | |
642 | ||
6ff862f6 KVA |
643 | &twl_usb_comparator { |
644 | usb-supply = <&vusb>; | |
645 | }; | |
ad871c10 KVA |
646 | |
647 | &usb_otg_hs { | |
648 | interface-type = <1>; | |
649 | mode = <3>; | |
650 | power = <50>; | |
651 | }; | |
7c572d5e TV |
652 | |
653 | &dss { | |
654 | status = "ok"; | |
655 | }; | |
656 | ||
657 | &dsi1 { | |
658 | status = "ok"; | |
659 | vdd-supply = <&vcxio>; | |
660 | ||
661 | port { | |
662 | dsi1_out_ep: endpoint { | |
663 | remote-endpoint = <&lcd0_in>; | |
664 | lanes = <0 1 2 3 4 5>; | |
665 | }; | |
666 | }; | |
667 | ||
668 | lcd0: display { | |
669 | compatible = "tpo,taal", "panel-dsi-cm"; | |
670 | label = "lcd0"; | |
671 | ||
672 | reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ | |
673 | ||
674 | port { | |
675 | lcd0_in: endpoint { | |
676 | remote-endpoint = <&dsi1_out_ep>; | |
677 | }; | |
678 | }; | |
679 | }; | |
680 | }; | |
681 | ||
682 | &dsi2 { | |
683 | status = "ok"; | |
684 | vdd-supply = <&vcxio>; | |
685 | ||
686 | port { | |
687 | dsi2_out_ep: endpoint { | |
688 | remote-endpoint = <&lcd1_in>; | |
689 | lanes = <0 1 2 3 4 5>; | |
690 | }; | |
691 | }; | |
692 | ||
693 | lcd1: display { | |
694 | compatible = "tpo,taal", "panel-dsi-cm"; | |
695 | label = "lcd1"; | |
696 | ||
697 | reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ | |
698 | ||
699 | port { | |
700 | lcd1_in: endpoint { | |
701 | remote-endpoint = <&dsi2_out_ep>; | |
702 | }; | |
703 | }; | |
704 | }; | |
705 | }; | |
706 | ||
707 | &hdmi { | |
708 | status = "ok"; | |
709 | vdda-supply = <&vdac>; | |
710 | ||
711 | port { | |
712 | hdmi_out: endpoint { | |
713 | remote-endpoint = <&tpd12s015_in>; | |
714 | }; | |
715 | }; | |
716 | }; |