]>
Commit | Line | Data |
---|---|---|
ee9a97db TL |
1 | /* |
2 | * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | #include "omap5.dtsi" | |
9 | #include <dt-bindings/interrupt-controller/irq.h> | |
10 | #include <dt-bindings/interrupt-controller/arm-gic.h> | |
11 | ||
12 | / { | |
13 | aliases { | |
14 | display0 = &hdmi0; | |
15 | }; | |
16 | ||
6b4e9418 NM |
17 | vmain: fixedregulator-vmain { |
18 | compatible = "regulator-fixed"; | |
19 | regulator-name = "vmain"; | |
20 | regulator-min-microvolt = <5000000>; | |
21 | regulator-max-microvolt = <5000000>; | |
22 | }; | |
23 | ||
24 | vsys_cobra: fixedregulator-vsys_cobra { | |
25 | compatible = "regulator-fixed"; | |
26 | regulator-name = "vsys_cobra"; | |
27 | vin-supply = <&vmain>; | |
28 | regulator-min-microvolt = <5000000>; | |
29 | regulator-max-microvolt = <5000000>; | |
30 | }; | |
31 | ||
32 | vdds_1v8_main: fixedregulator-vdds_1v8_main { | |
33 | compatible = "regulator-fixed"; | |
34 | regulator-name = "vdds_1v8_main"; | |
35 | vin-supply = <&smps7_reg>; | |
36 | regulator-min-microvolt = <1800000>; | |
37 | regulator-max-microvolt = <1800000>; | |
38 | }; | |
39 | ||
ee9a97db TL |
40 | vmmcsd_fixed: fixedregulator-mmcsd { |
41 | compatible = "regulator-fixed"; | |
42 | regulator-name = "vmmcsd_fixed"; | |
43 | regulator-min-microvolt = <3000000>; | |
44 | regulator-max-microvolt = <3000000>; | |
45 | }; | |
46 | ||
47 | mmc3_pwrseq: sdhci0_pwrseq { | |
48 | compatible = "mmc-pwrseq-simple"; | |
49 | clocks = <&clk32kgaudio>; | |
50 | clock-names = "ext_clock"; | |
51 | }; | |
52 | ||
53 | vmmcsdio_fixed: fixedregulator-mmcsdio { | |
54 | compatible = "regulator-fixed"; | |
55 | regulator-name = "vmmcsdio_fixed"; | |
56 | regulator-min-microvolt = <1800000>; | |
57 | regulator-max-microvolt = <1800000>; | |
58 | gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ | |
59 | enable-active-high; | |
60 | startup-delay-us = <70000>; | |
61 | pinctrl-names = "default"; | |
62 | pinctrl-0 = <&wlan_pins>; | |
63 | }; | |
64 | ||
65 | /* HS USB Host PHY on PORT 2 */ | |
66 | hsusb2_phy: hsusb2_phy { | |
67 | compatible = "usb-nop-xceiv"; | |
68 | reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ | |
69 | clocks = <&auxclk1_ck>; | |
70 | clock-names = "main_clk"; | |
71 | clock-frequency = <19200000>; | |
72 | }; | |
73 | ||
74 | /* HS USB Host PHY on PORT 3 */ | |
75 | hsusb3_phy: hsusb3_phy { | |
76 | compatible = "usb-nop-xceiv"; | |
77 | reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ | |
78 | }; | |
79 | ||
e6db7f1a | 80 | tpd12s015: encoder { |
ee9a97db TL |
81 | compatible = "ti,tpd12s015"; |
82 | ||
83 | pinctrl-names = "default"; | |
84 | pinctrl-0 = <&tpd12s015_pins>; | |
85 | ||
86 | /* gpios defined in the board specific dts */ | |
87 | ||
88 | ports { | |
89 | #address-cells = <1>; | |
90 | #size-cells = <0>; | |
91 | ||
92 | port@0 { | |
93 | reg = <0>; | |
94 | ||
e6db7f1a | 95 | tpd12s015_in: endpoint { |
ee9a97db TL |
96 | remote-endpoint = <&hdmi_out>; |
97 | }; | |
98 | }; | |
99 | ||
100 | port@1 { | |
101 | reg = <1>; | |
102 | ||
e6db7f1a | 103 | tpd12s015_out: endpoint { |
ee9a97db TL |
104 | remote-endpoint = <&hdmi_connector_in>; |
105 | }; | |
106 | }; | |
107 | }; | |
108 | }; | |
109 | ||
e6db7f1a | 110 | hdmi0: connector { |
ee9a97db TL |
111 | compatible = "hdmi-connector"; |
112 | label = "hdmi"; | |
113 | ||
114 | type = "b"; | |
115 | ||
116 | port { | |
117 | hdmi_connector_in: endpoint { | |
118 | remote-endpoint = <&tpd12s015_out>; | |
119 | }; | |
120 | }; | |
121 | }; | |
122 | ||
123 | sound: sound { | |
124 | compatible = "ti,abe-twl6040"; | |
125 | ti,model = "omap5-uevm"; | |
126 | ||
0b68f1be | 127 | ti,jack-detection; |
ee9a97db TL |
128 | ti,mclk-freq = <19200000>; |
129 | ||
130 | ti,mcpdm = <&mcpdm>; | |
131 | ||
132 | ti,twl6040 = <&twl6040>; | |
133 | ||
134 | /* Audio routing */ | |
135 | ti,audio-routing = | |
136 | "Headset Stereophone", "HSOL", | |
137 | "Headset Stereophone", "HSOR", | |
138 | "Line Out", "AUXL", | |
139 | "Line Out", "AUXR", | |
140 | "HSMIC", "Headset Mic", | |
141 | "Headset Mic", "Headset Mic Bias", | |
142 | "AFML", "Line In", | |
143 | "AFMR", "Line In"; | |
144 | }; | |
145 | }; | |
146 | ||
af756bbc TL |
147 | &gpio8 { |
148 | /* TI trees use GPIO instead of msecure, see also muxing */ | |
149 | p234 { | |
150 | gpio-hog; | |
151 | gpios = <10 GPIO_ACTIVE_HIGH>; | |
152 | output-high; | |
153 | line-name = "gpio8_234/msecure"; | |
154 | }; | |
155 | }; | |
156 | ||
ee9a97db TL |
157 | &omap5_pmx_core { |
158 | pinctrl-names = "default"; | |
159 | pinctrl-0 = < | |
160 | &usbhost_pins | |
161 | &led_gpio_pins | |
162 | >; | |
163 | ||
164 | twl6040_pins: pinmux_twl6040_pins { | |
165 | pinctrl-single,pins = < | |
2fcf367a | 166 | OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ |
ee9a97db TL |
167 | >; |
168 | }; | |
169 | ||
170 | mcpdm_pins: pinmux_mcpdm_pins { | |
171 | pinctrl-single,pins = < | |
2fcf367a JMC |
172 | OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ |
173 | OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ | |
174 | OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ | |
175 | OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ | |
176 | OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ | |
ee9a97db TL |
177 | >; |
178 | }; | |
179 | ||
180 | mcbsp1_pins: pinmux_mcbsp1_pins { | |
181 | pinctrl-single,pins = < | |
2fcf367a JMC |
182 | OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ |
183 | OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ | |
184 | OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ | |
185 | OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ | |
ee9a97db TL |
186 | >; |
187 | }; | |
188 | ||
189 | mcbsp2_pins: pinmux_mcbsp2_pins { | |
190 | pinctrl-single,pins = < | |
2fcf367a JMC |
191 | OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ |
192 | OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ | |
193 | OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ | |
194 | OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ | |
ee9a97db TL |
195 | >; |
196 | }; | |
197 | ||
198 | i2c1_pins: pinmux_i2c1_pins { | |
199 | pinctrl-single,pins = < | |
2fcf367a JMC |
200 | OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ |
201 | OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ | |
ee9a97db TL |
202 | >; |
203 | }; | |
204 | ||
205 | mcspi2_pins: pinmux_mcspi2_pins { | |
206 | pinctrl-single,pins = < | |
2fcf367a JMC |
207 | OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ |
208 | OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ | |
209 | OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ | |
210 | OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ | |
ee9a97db TL |
211 | >; |
212 | }; | |
213 | ||
214 | mcspi3_pins: pinmux_mcspi3_pins { | |
215 | pinctrl-single,pins = < | |
2fcf367a JMC |
216 | OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ |
217 | OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ | |
218 | OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ | |
219 | OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ | |
ee9a97db TL |
220 | >; |
221 | }; | |
222 | ||
223 | mmc3_pins: pinmux_mmc3_pins { | |
224 | pinctrl-single,pins = < | |
225 | OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ | |
226 | OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ | |
227 | OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ | |
228 | OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ | |
229 | OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ | |
230 | OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ | |
231 | >; | |
232 | }; | |
233 | ||
234 | wlan_pins: pinmux_wlan_pins { | |
235 | pinctrl-single,pins = < | |
236 | OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ | |
237 | >; | |
238 | }; | |
239 | ||
af756bbc TL |
240 | /* TI trees use GPIO mode; msecure mode does not work reliably? */ |
241 | palmas_msecure_pins: palmas_msecure_pins { | |
242 | pinctrl-single,pins = < | |
243 | OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ | |
244 | >; | |
245 | }; | |
246 | ||
ee9a97db TL |
247 | usbhost_pins: pinmux_usbhost_pins { |
248 | pinctrl-single,pins = < | |
2fcf367a JMC |
249 | OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ |
250 | OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ | |
ee9a97db | 251 | |
2fcf367a JMC |
252 | OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ |
253 | OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ | |
ee9a97db | 254 | |
2fcf367a JMC |
255 | OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ |
256 | OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ | |
ee9a97db TL |
257 | >; |
258 | }; | |
259 | ||
260 | led_gpio_pins: pinmux_led_gpio_pins { | |
261 | pinctrl-single,pins = < | |
2fcf367a | 262 | OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ |
ee9a97db TL |
263 | >; |
264 | }; | |
265 | ||
266 | uart1_pins: pinmux_uart1_pins { | |
267 | pinctrl-single,pins = < | |
2fcf367a JMC |
268 | OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ |
269 | OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ | |
270 | OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ | |
271 | OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ | |
ee9a97db TL |
272 | >; |
273 | }; | |
274 | ||
275 | uart3_pins: pinmux_uart3_pins { | |
276 | pinctrl-single,pins = < | |
2fcf367a JMC |
277 | OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ |
278 | OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ | |
ee9a97db TL |
279 | >; |
280 | }; | |
281 | ||
282 | uart5_pins: pinmux_uart5_pins { | |
283 | pinctrl-single,pins = < | |
2fcf367a JMC |
284 | OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ |
285 | OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ | |
286 | OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ | |
287 | OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ | |
ee9a97db TL |
288 | >; |
289 | }; | |
290 | ||
291 | dss_hdmi_pins: pinmux_dss_hdmi_pins { | |
292 | pinctrl-single,pins = < | |
3a8ed20d | 293 | OMAP5_IOPAD(0x13c, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ |
2fcf367a JMC |
294 | OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ |
295 | OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ | |
ee9a97db TL |
296 | >; |
297 | }; | |
298 | ||
299 | tpd12s015_pins: pinmux_tpd12s015_pins { | |
300 | pinctrl-single,pins = < | |
2fcf367a | 301 | OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ |
ee9a97db TL |
302 | >; |
303 | }; | |
304 | }; | |
305 | ||
306 | &omap5_pmx_wkup { | |
307 | pinctrl-names = "default"; | |
308 | pinctrl-0 = < | |
309 | &usbhost_wkup_pins | |
310 | >; | |
311 | ||
af756bbc TL |
312 | palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { |
313 | pinctrl-single,pins = < | |
314 | OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */ | |
315 | >; | |
316 | }; | |
317 | ||
ee9a97db TL |
318 | usbhost_wkup_pins: pinmux_usbhost_wkup_pins { |
319 | pinctrl-single,pins = < | |
2fcf367a | 320 | OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ |
ee9a97db TL |
321 | >; |
322 | }; | |
323 | ||
324 | wlcore_irq_pin: pinmux_wlcore_irq_pin { | |
325 | pinctrl-single,pins = < | |
08f9268b | 326 | OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ |
ee9a97db TL |
327 | >; |
328 | }; | |
329 | }; | |
330 | ||
331 | &mmc1 { | |
332 | vmmc-supply = <&ldo9_reg>; | |
333 | bus-width = <4>; | |
334 | }; | |
335 | ||
336 | &mmc2 { | |
337 | vmmc-supply = <&vmmcsd_fixed>; | |
338 | bus-width = <8>; | |
339 | ti,non-removable; | |
340 | }; | |
341 | ||
342 | &mmc3 { | |
343 | vmmc-supply = <&vmmcsdio_fixed>; | |
344 | mmc-pwrseq = <&mmc3_pwrseq>; | |
345 | bus-width = <4>; | |
346 | non-removable; | |
347 | cap-power-off-card; | |
348 | pinctrl-names = "default"; | |
08f9268b TL |
349 | pinctrl-0 = <&mmc3_pins>; |
350 | interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH | |
351 | &omap5_pmx_core 0x16a>; | |
ee9a97db TL |
352 | |
353 | #address-cells = <1>; | |
354 | #size-cells = <0>; | |
355 | wlcore: wlcore@2 { | |
356 | compatible = "ti,wl1271"; | |
357 | reg = <2>; | |
08f9268b TL |
358 | pinctrl-names = "default"; |
359 | pinctrl-0 = <&wlcore_irq_pin>; | |
ee9a97db TL |
360 | interrupt-parent = <&gpio1>; |
361 | interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ | |
362 | ref-clock-frequency = <26000000>; | |
363 | }; | |
364 | }; | |
365 | ||
366 | &mmc4 { | |
367 | status = "disabled"; | |
368 | }; | |
369 | ||
370 | &mmc5 { | |
371 | status = "disabled"; | |
372 | }; | |
373 | ||
374 | &i2c1 { | |
375 | pinctrl-names = "default"; | |
376 | pinctrl-0 = <&i2c1_pins>; | |
377 | ||
378 | clock-frequency = <400000>; | |
379 | ||
380 | palmas: palmas@48 { | |
381 | compatible = "ti,palmas"; | |
382 | interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ | |
383 | reg = <0x48>; | |
384 | interrupt-controller; | |
385 | #interrupt-cells = <2>; | |
386 | ti,system-power-controller; | |
952a5db0 TL |
387 | ti,mux-pad1 = <0xa1>; |
388 | ti,mux-pad2 = <0x1b>; | |
af756bbc TL |
389 | pinctrl-names = "default"; |
390 | pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; | |
ee9a97db | 391 | |
952a5db0 TL |
392 | palmas_gpio: gpio { |
393 | compatible = "ti,palmas-gpio"; | |
394 | gpio-controller; | |
395 | #gpio-cells = <2>; | |
396 | }; | |
397 | ||
ee9a97db TL |
398 | extcon_usb3: palmas_usb { |
399 | compatible = "ti,palmas-usb-vid"; | |
400 | ti,enable-vbus-detection; | |
401 | ti,enable-id-detection; | |
402 | ti,wakeup; | |
952a5db0 | 403 | id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>; |
ee9a97db TL |
404 | }; |
405 | ||
406 | clk32kgaudio: palmas_clk32k@1 { | |
407 | compatible = "ti,palmas-clk32kgaudio"; | |
408 | #clock-cells = <0>; | |
409 | }; | |
410 | ||
c08659d4 NS |
411 | rtc { |
412 | compatible = "ti,palmas-rtc"; | |
413 | interrupt-parent = <&palmas>; | |
414 | interrupts = <8 IRQ_TYPE_NONE>; | |
415 | ti,backup-battery-chargeable; | |
416 | ti,backup-battery-charge-high-current; | |
417 | }; | |
418 | ||
725ed223 | 419 | gpadc: gpadc { |
cecc77c8 NS |
420 | compatible = "ti,palmas-gpadc"; |
421 | interrupts = <18 0 | |
422 | 16 0 | |
423 | 17 0>; | |
424 | #io-channel-cells = <1>; | |
425 | ti,channel0-current-microamp = <5>; | |
426 | ti,channel3-current-microamp = <10>; | |
427 | }; | |
428 | ||
ee9a97db TL |
429 | palmas_pmic { |
430 | compatible = "ti,palmas-pmic"; | |
431 | interrupt-parent = <&palmas>; | |
432 | interrupts = <14 IRQ_TYPE_NONE>; | |
e640bc30 | 433 | interrupt-names = "short-irq"; |
ee9a97db TL |
434 | |
435 | ti,ldo6-vibrator; | |
436 | ||
6b4e9418 NM |
437 | smps123-in-supply = <&vsys_cobra>; |
438 | smps45-in-supply = <&vsys_cobra>; | |
439 | smps6-in-supply = <&vsys_cobra>; | |
440 | smps7-in-supply = <&vsys_cobra>; | |
441 | smps8-in-supply = <&vsys_cobra>; | |
442 | smps9-in-supply = <&vsys_cobra>; | |
443 | smps10_out2-in-supply = <&vsys_cobra>; | |
444 | smps10_out1-in-supply = <&vsys_cobra>; | |
445 | ldo1-in-supply = <&vsys_cobra>; | |
446 | ldo2-in-supply = <&vsys_cobra>; | |
447 | ldo3-in-supply = <&vdds_1v8_main>; | |
448 | ldo4-in-supply = <&vdds_1v8_main>; | |
449 | ldo5-in-supply = <&vsys_cobra>; | |
450 | ldo6-in-supply = <&vdds_1v8_main>; | |
451 | ldo7-in-supply = <&vsys_cobra>; | |
452 | ldo8-in-supply = <&vsys_cobra>; | |
453 | ldo9-in-supply = <&vmmcsd_fixed>; | |
454 | ldoln-in-supply = <&vsys_cobra>; | |
455 | ldousb-in-supply = <&vsys_cobra>; | |
456 | ||
ee9a97db TL |
457 | regulators { |
458 | smps123_reg: smps123 { | |
459 | /* VDD_OPP_MPU */ | |
460 | regulator-name = "smps123"; | |
461 | regulator-min-microvolt = < 600000>; | |
462 | regulator-max-microvolt = <1500000>; | |
463 | regulator-always-on; | |
464 | regulator-boot-on; | |
465 | }; | |
466 | ||
467 | smps45_reg: smps45 { | |
468 | /* VDD_OPP_MM */ | |
469 | regulator-name = "smps45"; | |
470 | regulator-min-microvolt = < 600000>; | |
471 | regulator-max-microvolt = <1310000>; | |
472 | regulator-always-on; | |
473 | regulator-boot-on; | |
474 | }; | |
475 | ||
476 | smps6_reg: smps6 { | |
477 | /* VDD_DDR3 - over VDD_SMPS6 */ | |
478 | regulator-name = "smps6"; | |
1bc2f5fa NS |
479 | regulator-min-microvolt = <1350000>; |
480 | regulator-max-microvolt = <1350000>; | |
ee9a97db TL |
481 | regulator-always-on; |
482 | regulator-boot-on; | |
483 | }; | |
484 | ||
485 | smps7_reg: smps7 { | |
486 | /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ | |
487 | regulator-name = "smps7"; | |
488 | regulator-min-microvolt = <1800000>; | |
489 | regulator-max-microvolt = <1800000>; | |
490 | regulator-always-on; | |
491 | regulator-boot-on; | |
492 | }; | |
493 | ||
494 | smps8_reg: smps8 { | |
495 | /* VDD_OPP_CORE */ | |
496 | regulator-name = "smps8"; | |
497 | regulator-min-microvolt = < 600000>; | |
498 | regulator-max-microvolt = <1310000>; | |
499 | regulator-always-on; | |
500 | regulator-boot-on; | |
501 | }; | |
502 | ||
503 | smps9_reg: smps9 { | |
504 | /* VDDA_2v1_AUD over VDD_2v1 */ | |
505 | regulator-name = "smps9"; | |
506 | regulator-min-microvolt = <2100000>; | |
507 | regulator-max-microvolt = <2100000>; | |
508 | ti,smps-range = <0x80>; | |
509 | }; | |
510 | ||
511 | smps10_out2_reg: smps10_out2 { | |
512 | /* VBUS_5V_OTG */ | |
513 | regulator-name = "smps10_out2"; | |
514 | regulator-min-microvolt = <5000000>; | |
515 | regulator-max-microvolt = <5000000>; | |
516 | regulator-always-on; | |
517 | regulator-boot-on; | |
518 | }; | |
519 | ||
520 | smps10_out1_reg: smps10_out1 { | |
521 | /* VBUS_5V_OTG */ | |
522 | regulator-name = "smps10_out1"; | |
523 | regulator-min-microvolt = <5000000>; | |
524 | regulator-max-microvolt = <5000000>; | |
525 | }; | |
526 | ||
527 | ldo1_reg: ldo1 { | |
528 | /* VDDAPHY_CAM: vdda_csiport */ | |
529 | regulator-name = "ldo1"; | |
5086e5c7 | 530 | regulator-min-microvolt = <1800000>; |
ee9a97db TL |
531 | regulator-max-microvolt = <1800000>; |
532 | }; | |
533 | ||
534 | ldo2_reg: ldo2 { | |
535 | /* VCC_2V8_DISP: Does not go anywhere */ | |
536 | regulator-name = "ldo2"; | |
537 | regulator-min-microvolt = <2800000>; | |
538 | regulator-max-microvolt = <2800000>; | |
539 | /* Unused */ | |
540 | status = "disabled"; | |
541 | }; | |
542 | ||
543 | ldo3_reg: ldo3 { | |
544 | /* VDDAPHY_MDM: vdda_lli */ | |
545 | regulator-name = "ldo3"; | |
546 | regulator-min-microvolt = <1500000>; | |
547 | regulator-max-microvolt = <1500000>; | |
548 | regulator-boot-on; | |
549 | /* Only if Modem is used */ | |
550 | status = "disabled"; | |
551 | }; | |
552 | ||
553 | ldo4_reg: ldo4 { | |
554 | /* VDDAPHY_DISP: vdda_dsiport/hdmi */ | |
555 | regulator-name = "ldo4"; | |
5086e5c7 | 556 | regulator-min-microvolt = <1800000>; |
ee9a97db TL |
557 | regulator-max-microvolt = <1800000>; |
558 | }; | |
559 | ||
560 | ldo5_reg: ldo5 { | |
561 | /* VDDA_1V8_PHY: usb/sata/hdmi.. */ | |
562 | regulator-name = "ldo5"; | |
563 | regulator-min-microvolt = <1800000>; | |
564 | regulator-max-microvolt = <1800000>; | |
565 | regulator-always-on; | |
566 | regulator-boot-on; | |
567 | }; | |
568 | ||
569 | ldo6_reg: ldo6 { | |
570 | /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ | |
571 | regulator-name = "ldo6"; | |
572 | regulator-min-microvolt = <1200000>; | |
573 | regulator-max-microvolt = <1200000>; | |
574 | regulator-always-on; | |
575 | regulator-boot-on; | |
576 | }; | |
577 | ||
578 | ldo7_reg: ldo7 { | |
579 | /* VDD_VPP: vpp1 */ | |
580 | regulator-name = "ldo7"; | |
581 | regulator-min-microvolt = <2000000>; | |
582 | regulator-max-microvolt = <2000000>; | |
583 | /* Only for efuse reprograming! */ | |
584 | status = "disabled"; | |
585 | }; | |
586 | ||
587 | ldo8_reg: ldo8 { | |
588 | /* VDD_3v0: Does not go anywhere */ | |
589 | regulator-name = "ldo8"; | |
590 | regulator-min-microvolt = <3000000>; | |
591 | regulator-max-microvolt = <3000000>; | |
592 | regulator-boot-on; | |
593 | /* Unused */ | |
594 | status = "disabled"; | |
595 | }; | |
596 | ||
597 | ldo9_reg: ldo9 { | |
598 | /* VCC_DV_SDIO: vdds_sdcard */ | |
599 | regulator-name = "ldo9"; | |
600 | regulator-min-microvolt = <1800000>; | |
601 | regulator-max-microvolt = <3000000>; | |
602 | regulator-boot-on; | |
603 | }; | |
604 | ||
605 | ldoln_reg: ldoln { | |
606 | /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ | |
607 | regulator-name = "ldoln"; | |
608 | regulator-min-microvolt = <1800000>; | |
609 | regulator-max-microvolt = <1800000>; | |
610 | regulator-always-on; | |
611 | regulator-boot-on; | |
612 | }; | |
613 | ||
614 | ldousb_reg: ldousb { | |
615 | /* VDDA_3V_USB: VDDA_USBHS33 */ | |
616 | regulator-name = "ldousb"; | |
617 | regulator-min-microvolt = <3250000>; | |
618 | regulator-max-microvolt = <3250000>; | |
619 | regulator-always-on; | |
620 | regulator-boot-on; | |
621 | }; | |
622 | ||
623 | regen3_reg: regen3 { | |
624 | /* REGEN3 controls LDO9 supply to card */ | |
625 | regulator-name = "regen3"; | |
626 | regulator-always-on; | |
627 | regulator-boot-on; | |
628 | }; | |
629 | }; | |
630 | }; | |
631 | ||
632 | palmas_power_button: palmas_power_button { | |
633 | compatible = "ti,palmas-pwrbutton"; | |
634 | interrupt-parent = <&palmas>; | |
635 | interrupts = <1 IRQ_TYPE_EDGE_FALLING>; | |
636 | wakeup-source; | |
637 | }; | |
638 | }; | |
639 | ||
640 | twl6040: twl@4b { | |
641 | compatible = "ti,twl6040"; | |
9e21c75d | 642 | #clock-cells = <0>; |
ee9a97db TL |
643 | reg = <0x4b>; |
644 | ||
645 | pinctrl-names = "default"; | |
646 | pinctrl-0 = <&twl6040_pins>; | |
647 | ||
648 | interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ | |
49111cd1 TL |
649 | |
650 | /* audpwron gpio defined in the board specific dts */ | |
ee9a97db TL |
651 | |
652 | vio-supply = <&smps7_reg>; | |
653 | v2v1-supply = <&smps9_reg>; | |
654 | enable-active-high; | |
655 | ||
656 | clocks = <&clk32kgaudio>; | |
657 | clock-names = "clk32k"; | |
658 | }; | |
659 | }; | |
660 | ||
661 | &mcpdm { | |
662 | pinctrl-names = "default"; | |
663 | pinctrl-0 = <&mcpdm_pins>; | |
9e21c75d PU |
664 | |
665 | clocks = <&twl6040>; | |
666 | clock-names = "pdmclk"; | |
667 | ||
ee9a97db TL |
668 | status = "okay"; |
669 | }; | |
670 | ||
671 | &mcbsp1 { | |
672 | pinctrl-names = "default"; | |
673 | pinctrl-0 = <&mcbsp1_pins>; | |
674 | status = "okay"; | |
675 | }; | |
676 | ||
677 | &mcbsp2 { | |
678 | pinctrl-names = "default"; | |
679 | pinctrl-0 = <&mcbsp2_pins>; | |
680 | status = "okay"; | |
681 | }; | |
682 | ||
683 | &usbhshost { | |
684 | port2-mode = "ehci-hsic"; | |
685 | port3-mode = "ehci-hsic"; | |
686 | }; | |
687 | ||
688 | &usbhsehci { | |
689 | phys = <0 &hsusb2_phy &hsusb3_phy>; | |
690 | }; | |
691 | ||
692 | &usb3 { | |
693 | extcon = <&extcon_usb3>; | |
694 | vbus-supply = <&smps10_out1_reg>; | |
695 | }; | |
696 | ||
697 | &mcspi1 { | |
698 | ||
699 | }; | |
700 | ||
701 | &mcspi2 { | |
702 | pinctrl-names = "default"; | |
703 | pinctrl-0 = <&mcspi2_pins>; | |
704 | }; | |
705 | ||
706 | &mcspi3 { | |
707 | pinctrl-names = "default"; | |
708 | pinctrl-0 = <&mcspi3_pins>; | |
709 | }; | |
710 | ||
711 | &uart1 { | |
712 | pinctrl-names = "default"; | |
713 | pinctrl-0 = <&uart1_pins>; | |
714 | }; | |
715 | ||
716 | &uart3 { | |
717 | pinctrl-names = "default"; | |
718 | pinctrl-0 = <&uart3_pins>; | |
719 | interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, | |
720 | <&omap5_pmx_core 0x19c>; | |
721 | }; | |
722 | ||
723 | &uart5 { | |
724 | pinctrl-names = "default"; | |
725 | pinctrl-0 = <&uart5_pins>; | |
726 | }; | |
727 | ||
728 | &cpu0 { | |
729 | cpu0-supply = <&smps123_reg>; | |
730 | }; | |
731 | ||
732 | &dss { | |
733 | status = "ok"; | |
734 | }; | |
735 | ||
736 | &hdmi { | |
737 | status = "ok"; | |
738 | ||
739 | /* vdda-supply populated in board specific dts file */ | |
740 | ||
741 | pinctrl-names = "default"; | |
742 | pinctrl-0 = <&dss_hdmi_pins>; | |
743 | ||
744 | port { | |
745 | hdmi_out: endpoint { | |
746 | remote-endpoint = <&tpd12s015_in>; | |
747 | }; | |
748 | }; | |
749 | }; |