[mirror_ubuntu-focal-kernel.git] / arch / arm / boot / dts / qcom-apq8064-ifc6410.dts

#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Qualcomm APQ8064/IFC6410";
	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";

	aliases {
		serial0 = &gsbi7_serial;
		serial1 = &gsbi6_serial;
	};

	soc {
		pinctrl@800000 {
			card_detect: card_detect {
				mux {
					pins = "gpio26";
					function = "gpio";
					bias-disable;
				};
			};
		};

		rpm@108000 {
			regulators {
				vin_lvs1_3_6-supply = <&pm8921_s4>;
				vin_lvs2-supply = <&pm8921_s1>;
				vin_lvs4_5_7-supply = <&pm8921_s4>;

				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
				vdd_l24-supply = <&pm8921_s1>;
				vdd_l25-supply = <&pm8921_s1>;
				vdd_l26-supply = <&pm8921_s7>;
				vdd_l27-supply = <&pm8921_s7>;
				vdd_l28-supply = <&pm8921_s7>;


				/* Buck SMPS */
				pm8921_s1: s1 {
					regulator-always-on;
					regulator-min-microvolt = <1225000>;
					regulator-max-microvolt = <1225000>;
					qcom,switch-mode-frequency = <3200000>;
					bias-pull-down;
				};

				pm8921_s3: s3 {
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1400000>;
					qcom,switch-mode-frequency = <4800000>;
				};

				pm8921_s4: s4 {
					regulator-min-microvolt	= <1800000>;
					regulator-max-microvolt	= <1800000>;
					qcom,switch-mode-frequency = <3200000>;
				};

				pm8921_s7: s7 {
					regulator-min-microvolt = <1300000>;
					regulator-max-microvolt = <1300000>;
					qcom,switch-mode-frequency = <3200000>;
				};

				pm8921_l3: l3 {
					regulator-min-microvolt = <3050000>;
					regulator-max-microvolt = <3300000>;
					bias-pull-down;
				};

				pm8921_l4: l4 {
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1800000>;
					bias-pull-down;
				};

				pm8921_l5: l5 {
					regulator-min-microvolt = <2750000>;
					regulator-max-microvolt = <3000000>;
					bias-pull-down;
				};

				pm8921_l6: l6 {
					regulator-min-microvolt = <2950000>;
					regulator-max-microvolt = <2950000>;
					bias-pull-down;
				};

				pm8921_l23: l23 {
					regulator-min-microvolt = <1700000>;
					regulator-max-microvolt = <1900000>;
					bias-pull-down;
				};

				pm8921_lvs1: lvs1 {
					bias-pull-down;
				};
			};
		};

		ext_3p3v: regulator-fixed@1 {
			compatible = "regulator-fixed";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-name = "ext_3p3v";
			regulator-type = "voltage";
			startup-delay-us = <0>;
			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			regulator-boot-on;
		};

		gsbi3: gsbi@16200000 {
			status = "okay";
			qcom,mode = <GSBI_PROT_I2C>;
			i2c3: i2c@16280000 {
				status = "okay";
				pinctrl-0 = <&i2c3_pins>;
				pinctrl-names = "default";
			};
		};

		gsbi@12440000 {
			status = "okay";
			qcom,mode = <GSBI_PROT_I2C>;

			i2c@12460000 {
				status = "okay";
				clock-frequency = <200000>;
				pinctrl-0 = <&i2c1_pins>;
				pinctrl-names = "default";

				eeprom: eeprom@52 {
					compatible = "atmel,24c128";
					reg = <0x52>;
					pagesize = <32>;
				};
			};
		};

		gsbi@16500000 {
			status = "ok";
			qcom,mode = <GSBI_PROT_I2C_UART>;

			serial@16540000 {
				status = "ok";

				pinctrl-names = "default";
				pinctrl-0 = <&uart_pins>;
			};
		};

		gsbi@16600000 {
			status = "ok";
			qcom,mode = <GSBI_PROT_I2C_UART>;
			serial@16640000 {
				status = "ok";
			};
		};

		sata_phy0: phy@1b400000 {
			status = "okay";
		};

		sata0: sata@29000000 {
			status		= "okay";
			target-supply	= <&pm8921_s4>;
		};

		/* OTG */
		usb1_phy: phy@12500000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l4>;
		};

		usb3_phy: phy@12520000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l23>;
		};

		usb4_phy: phy@12530000 {
			status		= "okay";
			vddcx-supply	= <&pm8921_s3>;
			v3p3-supply	= <&pm8921_l3>;
			v1p8-supply	= <&pm8921_l23>;
		};

		gadget1: gadget@12500000 {
			status = "okay";
		};

		/* OTG */
		usb1: usb@12500000 {
			status = "okay";
		};

		usb3: usb@12520000 {
			status = "okay";
		};

		usb4: usb@12530000 {
			status = "okay";
		};

		amba {
			/* eMMC */
			sdcc1: sdcc@12400000 {
				status = "okay";
				vmmc-supply = <&pm8921_l5>;
				vqmmc-supply = <&pm8921_s4>;
			};

			/* External micro SD card */
			sdcc3: sdcc@12180000 {
				status = "okay";
				vmmc-supply = <&pm8921_l6>;
				pinctrl-names	= "default";
				pinctrl-0	= <&card_detect>;
				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
			};
			/* WLAN */
			sdcc4: sdcc@121c0000 {
				status = "okay";
				vmmc-supply = <&ext_3p3v>;
				vqmmc-supply = <&pm8921_lvs1>;
			};
		};
	};
};
Commit	Line	Data
f335b8af	1	#include "qcom-apq8064-v2.0.dtsi"
b4e10dd7	2	#include <dt-bindings/gpio/gpio.h>
f335b8af KG	3
	4	/ {
	5	model = "Qualcomm APQ8064/IFC6410";
	6	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
	7
d5d4654e PG	8	aliases {
d5d4654e PG	9	serial0 = &gsbi7_serial;
86e252a4	10	serial1 = &gsbi6_serial;
d5d4654e PG	11	};
d5d4654e PG	12
f335b8af	13	soc {
8c3166f5	14	pinctrl@800000 {
b4e10dd7 PG	15	card_detect: card_detect {
	16	mux {
	17	pins = "gpio26";
	18	function = "gpio";
	19	bias-disable;
	20	};
	21	};
8c3166f5	22	};
8c3166f5	23
ad560450 SK	24	rpm@108000 {
	25	regulators {
	26	vin_lvs1_3_6-supply = <&pm8921_s4>;
	27	vin_lvs2-supply = <&pm8921_s1>;
	28	vin_lvs4_5_7-supply = <&pm8921_s4>;
	29
	30	vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
	31	vdd_l24-supply = <&pm8921_s1>;
	32	vdd_l25-supply = <&pm8921_s1>;
	33	vdd_l26-supply = <&pm8921_s7>;
	34	vdd_l27-supply = <&pm8921_s7>;
	35	vdd_l28-supply = <&pm8921_s7>;
	36
	37
	38	/* Buck SMPS */
	39	pm8921_s1: s1 {
	40	regulator-always-on;
	41	regulator-min-microvolt = <1225000>;
	42	regulator-max-microvolt = <1225000>;
	43	qcom,switch-mode-frequency = <3200000>;
	44	bias-pull-down;
	45	};
	46
	47	pm8921_s3: s3 {
	48	regulator-min-microvolt = <1000000>;
	49	regulator-max-microvolt = <1400000>;
	50	qcom,switch-mode-frequency = <4800000>;
	51	};
	52
	53	pm8921_s4: s4 {
	54	regulator-min-microvolt = <1800000>;
	55	regulator-max-microvolt = <1800000>;
	56	qcom,switch-mode-frequency = <3200000>;
	57	};
	58
	59	pm8921_s7: s7 {
	60	regulator-min-microvolt = <1300000>;
	61	regulator-max-microvolt = <1300000>;
	62	qcom,switch-mode-frequency = <3200000>;
	63	};
	64
	65	pm8921_l3: l3 {
	66	regulator-min-microvolt = <3050000>;
	67	regulator-max-microvolt = <3300000>;
	68	bias-pull-down;
	69	};
	70
	71	pm8921_l4: l4 {
	72	regulator-min-microvolt = <1000000>;
	73	regulator-max-microvolt = <1800000>;
	74	bias-pull-down;
	75	};
	76
2736bbac SK	77	pm8921_l5: l5 {
	78	regulator-min-microvolt = <2750000>;
	79	regulator-max-microvolt = <3000000>;
	80	bias-pull-down;
	81	};
	82
ad560450 SK	83	pm8921_l6: l6 {
	84	regulator-min-microvolt = <2950000>;
	85	regulator-max-microvolt = <2950000>;
	86	bias-pull-down;
	87	};
	88
	89	pm8921_l23: l23 {
	90	regulator-min-microvolt = <1700000>;
	91	regulator-max-microvolt = <1900000>;
	92	bias-pull-down;
	93	};
2736bbac SK	94
	95	pm8921_lvs1: lvs1 {
	96	bias-pull-down;
	97	};
ad560450 SK	98	};
	99	};
	100
2736bbac SK	101	ext_3p3v: regulator-fixed@1 {
	102	compatible = "regulator-fixed";
	103	regulator-min-microvolt = <3300000>;
	104	regulator-max-microvolt = <3300000>;
	105	regulator-name = "ext_3p3v";
	106	regulator-type = "voltage";
	107	startup-delay-us = <0>;
	108	gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
	109	enable-active-high;
	110	regulator-boot-on;
	111	};
	112
3f62b46b SK	113	gsbi3: gsbi@16200000 {
	114	status = "okay";
	115	qcom,mode = <GSBI_PROT_I2C>;
	116	i2c3: i2c@16280000 {
	117	status = "okay";
	118	pinctrl-0 = <&i2c3_pins>;
	119	pinctrl-names = "default";
	120	};
	121	};
	122
8c3166f5	123	gsbi@12440000 {
	124	status = "okay";
	125	qcom,mode = <GSBI_PROT_I2C>;
	126
	127	i2c@12460000 {
	128	status = "okay";
	129	clock-frequency = <200000>;
	130	pinctrl-0 = <&i2c1_pins>;
	131	pinctrl-names = "default";
	132
	133	eeprom: eeprom@52 {
	134	compatible = "atmel,24c128";
	135	reg = <0x52>;
	136	pagesize = <32>;
	137	};
	138	};
	139	};
	140
86e252a4 PG	141	gsbi@16500000 {
	142	status = "ok";
	143	qcom,mode = <GSBI_PROT_I2C_UART>;
	144
	145	serial@16540000 {
	146	status = "ok";
	147
	148	pinctrl-names = "default";
	149	pinctrl-0 = <&uart_pins>;
	150	};
	151	};
	152
f335b8af KG	153	gsbi@16600000 {
	154	status = "ok";
	155	qcom,mode = <GSBI_PROT_I2C_UART>;
	156	serial@16640000 {
	157	status = "ok";
	158	};
	159	};
045644ff	160
e629335f SK	161	sata_phy0: phy@1b400000 {
	162	status = "okay";
	163	};
	164
	165	sata0: sata@29000000 {
	166	status = "okay";
	167	target-supply = <&pm8921_s4>;
	168	};
	169
ea986611 SK	170	/* OTG */
	171	usb1_phy: phy@12500000 {
	172	status = "okay";
	173	vddcx-supply = <&pm8921_s3>;
	174	v3p3-supply = <&pm8921_l3>;
	175	v1p8-supply = <&pm8921_l4>;
	176	};
	177
223280b1 SK	178	usb3_phy: phy@12520000 {
	179	status = "okay";
	180	vddcx-supply = <&pm8921_s3>;
	181	v3p3-supply = <&pm8921_l3>;
	182	v1p8-supply = <&pm8921_l23>;
	183	};
	184
	185	usb4_phy: phy@12530000 {
	186	status = "okay";
	187	vddcx-supply = <&pm8921_s3>;
	188	v3p3-supply = <&pm8921_l3>;
	189	v1p8-supply = <&pm8921_l23>;
	190	};
	191
ea986611 SK	192	gadget1: gadget@12500000 {
	193	status = "okay";
	194	};
	195
	196	/* OTG */
	197	usb1: usb@12500000 {
	198	status = "okay";
	199	};
	200
223280b1 SK	201	usb3: usb@12520000 {
	202	status = "okay";
	203	};
	204
	205	usb4: usb@12530000 {
	206	status = "okay";
	207	};
	208
045644ff SK	209	amba {
	210	/* eMMC */
	211	sdcc1: sdcc@12400000 {
	212	status = "okay";
2736bbac SK	213	vmmc-supply = <&pm8921_l5>;
2736bbac SK	214	vqmmc-supply = <&pm8921_s4>;
045644ff SK	215	};
	216
	217	/* External micro SD card */
	218	sdcc3: sdcc@12180000 {
	219	status = "okay";
2736bbac	220	vmmc-supply = <&pm8921_l6>;
b4e10dd7 PG	221	pinctrl-names = "default";
	222	pinctrl-0 = <&card_detect>;
	223	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
045644ff	224	};
0be5fef1 SK	225	/* WLAN */
	226	sdcc4: sdcc@121c0000 {
	227	status = "okay";
2736bbac SK	228	vmmc-supply = <&ext_3p3v>;
2736bbac SK	229	vqmmc-supply = <&pm8921_lvs1>;
0be5fef1	230	};
045644ff	231	};
f335b8af KG	232	};
f335b8af KG	233	};