[mirror_ubuntu-zesty-kernel.git] / arch / arm / boot / dts / rk3288-evb.dtsi

/*
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include <dt-bindings/pwm/pwm.h>
#include "rk3288.dtsi"

/ {
	memory {
		device_type = "memory";
		reg = <0x0 0x80000000>;
	};

	backlight {
		compatible = "pwm-backlight";
		brightness-levels = <
			  0   1   2   3   4   5   6   7
			  8   9  10  11  12  13  14  15
			 16  17  18  19  20  21  22  23
			 24  25  26  27  28  29  30  31
			 32  33  34  35  36  37  38  39
			 40  41  42  43  44  45  46  47
			 48  49  50  51  52  53  54  55
			 56  57  58  59  60  61  62  63
			 64  65  66  67  68  69  70  71
			 72  73  74  75  76  77  78  79
			 80  81  82  83  84  85  86  87
			 88  89  90  91  92  93  94  95
			 96  97  98  99 100 101 102 103
			104 105 106 107 108 109 110 111
			112 113 114 115 116 117 118 119
			120 121 122 123 124 125 126 127
			128 129 130 131 132 133 134 135
			136 137 138 139 140 141 142 143
			144 145 146 147 148 149 150 151
			152 153 154 155 156 157 158 159
			160 161 162 163 164 165 166 167
			168 169 170 171 172 173 174 175
			176 177 178 179 180 181 182 183
			184 185 186 187 188 189 190 191
			192 193 194 195 196 197 198 199
			200 201 202 203 204 205 206 207
			208 209 210 211 212 213 214 215
			216 217 218 219 220 221 222 223
			224 225 226 227 228 229 230 231
			232 233 234 235 236 237 238 239
			240 241 242 243 244 245 246 247
			248 249 250 251 252 253 254 255>;
		default-brightness-level = <128>;
		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&bl_en>;
		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
	};

	ext_gmac: external-gmac-clock {
		compatible = "fixed-clock";
		clock-frequency = <125000000>;
		clock-output-names = "ext_gmac";
		#clock-cells = <0>;
	};

	gpio-keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		autorepeat;

		pinctrl-names = "default";
		pinctrl-0 = <&pwrbtn>;

		button@0 {
			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
			linux,code = <116>;
			label = "GPIO Key Power";
			linux,input-type = <1>;
			wakeup-source;
			debounce-interval = <100>;
		};
	};

	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
	vcc_host: vcc-host-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&host_vbus_drv>;
		regulator-name = "vcc_host";
		regulator-always-on;
		regulator-boot-on;
	};

	vcc_phy: vcc-phy-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&eth_phy_pwr>;
		regulator-name = "vcc_phy";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vcc_sys: vsys-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sys";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	/*
	 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
	 * vcc_io directly.  Those boards won't be able to power cycle SD cards
	 * but it shouldn't hurt to toggle this pin there anyway.
	 */
	vcc_sd: sdmmc-regulator {
		compatible = "regulator-fixed";
		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&sdmmc_pwr>;
		regulator-name = "vcc_sd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100000>;
		vin-supply = <&vcc_io>;
	};
};

&cpu0 {
	cpu0-supply = <&vdd_cpu>;
};

&emmc {
	broken-cd;
	bus-width = <8>;
	cap-mmc-highspeed;
	disable-wp;
	non-removable;
	num-slots = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
	status = "okay";
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	card-detect-delay = <200>;
	disable-wp;			/* wp not hooked up */
	num-slots = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
	status = "okay";
	vmmc-supply = <&vcc_sd>;
	vqmmc-supply = <&vccio_sd>;
};

&gmac {
	phy-supply = <&vcc_phy>;
	phy-mode = "rgmii";
	clock_in_out = "input";
	snps,reset-gpio = <&gpio4 7 0>;
	snps,reset-active-low;
	snps,reset-delays-us = <0 10000 1000000>;
	assigned-clocks = <&cru SCLK_MAC>;
	assigned-clock-parents = <&ext_gmac>;
	pinctrl-names = "default";
	pinctrl-0 = <&rgmii_pins>;
	tx_delay = <0x30>;
	rx_delay = <0x10>;
	status = "ok";
};

&hdmi {
	ddc-i2c-bus = <&i2c5>;
	status = "okay";
};

&i2c0 {
	status = "okay";
};

&i2c5 {
	status = "okay";
};

&wdt {
	status = "okay";
};

&pwm0 {
	status = "okay";
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&uart4 {
	status = "okay";
};

&tsadc {
	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
	status = "okay";
};

&pinctrl {
	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
		drive-strength = <8>;
	};

	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
		bias-pull-up;
		drive-strength = <8>;
	};

	backlight {
		bl_en: bl-en {
			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	buttons {
		pwrbtn: pwrbtn {
			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	pmic {
		pmic_int: pmic-int {
			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sdmmc {
		/*
		 * Default drive strength isn't enough to achieve even
		 * high-speed mode on EVB board so bump up to 8ma.
		 */
		sdmmc_bus4: sdmmc-bus4 {
			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
		};

		sdmmc_clk: sdmmc-clk {
			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
		};

		sdmmc_cmd: sdmmc-cmd {
			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
		};

		sdmmc_pwr: sdmmc-pwr {
			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		host_vbus_drv: host-vbus-drv {
			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	eth_phy {
		eth_phy_pwr: eth-phy-pwr {
			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&usbphy {
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host1 {
	status = "okay";
};

&vopb {
	status = "okay";
};

&vopb_mmu {
	status = "okay";
};

&vopl {
	status = "okay";
};

&vopl_mmu {
	status = "okay";
};
Commit	Line	Data
6ce0562a	1	/*
cdcc8b6b HS	2	* This file is dual-licensed: you can use it either under the terms
	3	* of the GPL or the X11 license, at your option. Note that this dual
	4	* licensing only applies to this file, and not this project as a
	5	* whole.
6ce0562a	6	*
cdcc8b6b HS	7	* a) This file is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License as
	9	* published by the Free Software Foundation; either version 2 of the
	10	* License, or (at your option) any later version.
	11	*
	12	* This file is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* Or, alternatively,
	18	*
	19	* b) Permission is hereby granted, free of charge, to any person
	20	* obtaining a copy of this software and associated documentation
	21	* files (the "Software"), to deal in the Software without
	22	* restriction, including without limitation the rights to use,
	23	* copy, modify, merge, publish, distribute, sublicense, and/or
	24	* sell copies of the Software, and to permit persons to whom the
	25	* Software is furnished to do so, subject to the following
	26	* conditions:
	27	*
	28	* The above copyright notice and this permission notice shall be
	29	* included in all copies or substantial portions of the Software.
	30	*
	31	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	32	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	33	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	34	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	35	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	36	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	37	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	38	* OTHER DEALINGS IN THE SOFTWARE.
6ce0562a HS	39	*/
6ce0562a HS	40
0541f94f	41	#include <dt-bindings/pwm/pwm.h>
6ce0562a HS	42	#include "rk3288.dtsi"
	43
	44	/ {
	45	memory {
6158e6d0	46	device_type = "memory";
6ce0562a HS	47	reg = <0x0 0x80000000>;
	48	};
	49
0541f94f DA	50	backlight {
	51	compatible = "pwm-backlight";
	52	brightness-levels = <
	53	0 1 2 3 4 5 6 7
	54	8 9 10 11 12 13 14 15
	55	16 17 18 19 20 21 22 23
	56	24 25 26 27 28 29 30 31
	57	32 33 34 35 36 37 38 39
	58	40 41 42 43 44 45 46 47
	59	48 49 50 51 52 53 54 55
	60	56 57 58 59 60 61 62 63
	61	64 65 66 67 68 69 70 71
	62	72 73 74 75 76 77 78 79
	63	80 81 82 83 84 85 86 87
	64	88 89 90 91 92 93 94 95
	65	96 97 98 99 100 101 102 103
	66	104 105 106 107 108 109 110 111
	67	112 113 114 115 116 117 118 119
	68	120 121 122 123 124 125 126 127
	69	128 129 130 131 132 133 134 135
	70	136 137 138 139 140 141 142 143
	71	144 145 146 147 148 149 150 151
	72	152 153 154 155 156 157 158 159
	73	160 161 162 163 164 165 166 167
	74	168 169 170 171 172 173 174 175
	75	176 177 178 179 180 181 182 183
	76	184 185 186 187 188 189 190 191
	77	192 193 194 195 196 197 198 199
	78	200 201 202 203 204 205 206 207
	79	208 209 210 211 212 213 214 215
	80	216 217 218 219 220 221 222 223
	81	224 225 226 227 228 229 230 231
	82	232 233 234 235 236 237 238 239
	83	240 241 242 243 244 245 246 247
	84	248 249 250 251 252 253 254 255>;
	85	default-brightness-level = <128>;
	86	enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
	87	pinctrl-names = "default";
	88	pinctrl-0 = <&bl_en>;
	89	pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
	90	};
	91
b04061e6 CZ	92	ext_gmac: external-gmac-clock {
	93	compatible = "fixed-clock";
	94	clock-frequency = <125000000>;
	95	clock-output-names = "ext_gmac";
	96	#clock-cells = <0>;
	97	};
	98
6ce0562a HS	99	gpio-keys {
	100	compatible = "gpio-keys";
	101	#address-cells = <1>;
	102	#size-cells = <0>;
	103	autorepeat;
	104
	105	pinctrl-names = "default";
	106	pinctrl-0 = <&pwrbtn>;
	107
	108	button@0 {
	109	gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
	110	linux,code = <116>;
	111	label = "GPIO Key Power";
	112	linux,input-type = <1>;
4f66f247	113	wakeup-source;
6ce0562a HS	114	debounce-interval = <100>;
	115	};
	116	};
83a742b4 DA	117
	118	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
	119	vcc_host: vcc-host-regulator {
	120	compatible = "regulator-fixed";
	121	enable-active-high;
	122	gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
	123	pinctrl-names = "default";
	124	pinctrl-0 = <&host_vbus_drv>;
	125	regulator-name = "vcc_host";
	126	regulator-always-on;
	127	regulator-boot-on;
	128	};
e35e47ac RC	129
	130	vcc_phy: vcc-phy-regulator {
	131	compatible = "regulator-fixed";
	132	enable-active-high;
	133	gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
	134	pinctrl-names = "default";
	135	pinctrl-0 = <&eth_phy_pwr>;
	136	regulator-name = "vcc_phy";
68c3a884 RP	137	regulator-min-microvolt = <3300000>;
68c3a884 RP	138	regulator-max-microvolt = <3300000>;
e35e47ac RC	139	regulator-always-on;
	140	regulator-boot-on;
	141	};
91d5cb73 HS	142
	143	vcc_sys: vsys-regulator {
	144	compatible = "regulator-fixed";
	145	regulator-name = "vcc_sys";
	146	regulator-min-microvolt = <5000000>;
	147	regulator-max-microvolt = <5000000>;
	148	regulator-always-on;
	149	regulator-boot-on;
	150	};
e565abe1 DA	151
	152	/*
	153	* NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
	154	* vcc_io directly. Those boards won't be able to power cycle SD cards
	155	* but it shouldn't hurt to toggle this pin there anyway.
	156	*/
	157	vcc_sd: sdmmc-regulator {
	158	compatible = "regulator-fixed";
	159	gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
	160	pinctrl-names = "default";
	161	pinctrl-0 = <&sdmmc_pwr>;
	162	regulator-name = "vcc_sd";
	163	regulator-min-microvolt = <3300000>;
	164	regulator-max-microvolt = <3300000>;
	165	startup-delay-us = <100000>;
	166	vin-supply = <&vcc_io>;
	167	};
6ce0562a HS	168	};
6ce0562a HS	169
b04061e6 CZ	170	&cpu0 {
	171	cpu0-supply = <&vdd_cpu>;
	172	};
	173
2c31d949 DA	174	&emmc {
	175	broken-cd;
	176	bus-width = <8>;
	177	cap-mmc-highspeed;
	178	disable-wp;
	179	non-removable;
	180	num-slots = <1>;
	181	pinctrl-names = "default";
	182	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
	183	status = "okay";
	184	};
	185
	186	&sdmmc {
	187	bus-width = <4>;
	188	cap-mmc-highspeed;
	189	cap-sd-highspeed;
	190	card-detect-delay = <200>;
	191	disable-wp; /* wp not hooked up */
	192	num-slots = <1>;
	193	pinctrl-names = "default";
	194	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
	195	status = "okay";
e565abe1 DA	196	vmmc-supply = <&vcc_sd>;
e565abe1 DA	197	vqmmc-supply = <&vccio_sd>;
2c31d949 DA	198	};
2c31d949 DA	199
b04061e6 CZ	200	&gmac {
	201	phy-supply = <&vcc_phy>;
	202	phy-mode = "rgmii";
	203	clock_in_out = "input";
	204	snps,reset-gpio = <&gpio4 7 0>;
	205	snps,reset-active-low;
	206	snps,reset-delays-us = <0 10000 1000000>;
	207	assigned-clocks = <&cru SCLK_MAC>;
	208	assigned-clock-parents = <&ext_gmac>;
	209	pinctrl-names = "default";
	210	pinctrl-0 = <&rgmii_pins>;
	211	tx_delay = <0x30>;
	212	rx_delay = <0x10>;
	213	status = "ok";
	214	};
	215
	216	&hdmi {
	217	ddc-i2c-bus = <&i2c5>;
	218	status = "okay";
	219	};
	220
6ce0562a HS	221	&i2c0 {
	222	status = "okay";
	223	};
	224
863b76b2 HS	225	&i2c5 {
	226	status = "okay";
	227	};
	228
6ce0562a HS	229	&wdt {
	230	status = "okay";
	231	};
	232
0541f94f DA	233	&pwm0 {
	234	status = "okay";
	235	};
	236
6ce0562a HS	237	&uart0 {
	238	status = "okay";
	239	};
	240
	241	&uart1 {
	242	status = "okay";
	243	};
	244
	245	&uart2 {
	246	status = "okay";
	247	};
	248
	249	&uart3 {
	250	status = "okay";
	251	};
	252
	253	&uart4 {
	254	status = "okay";
	255	};
	256
ff9d0ecb CW	257	&tsadc {
	258	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
	259	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
	260	status = "okay";
	261	};
	262
6ce0562a	263	&pinctrl {
6618e478 DA	264	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
	265	drive-strength = <8>;
	266	};
	267
	268	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
	269	bias-pull-up;
	270	drive-strength = <8>;
	271	};
	272
0541f94f DA	273	backlight {
	274	bl_en: bl-en {
	275	rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
	276	};
	277	};
	278
6ce0562a HS	279	buttons {
	280	pwrbtn: pwrbtn {
	281	rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
	282	};
	283	};
83a742b4	284
91ff8cd8 DA	285	pmic {
	286	pmic_int: pmic-int {
	287	rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
	288	};
	289	};
	290
6618e478 DA	291	sdmmc {
	292	/*
	293	* Default drive strength isn't enough to achieve even
	294	* high-speed mode on EVB board so bump up to 8ma.
	295	*/
	296	sdmmc_bus4: sdmmc-bus4 {
	297	rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
	298	<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
	299	<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
	300	<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
	301	};
	302
	303	sdmmc_clk: sdmmc-clk {
	304	rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
	305	};
	306
	307	sdmmc_cmd: sdmmc-cmd {
	308	rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
	309	};
e565abe1 DA	310
	311	sdmmc_pwr: sdmmc-pwr {
	312	rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
	313	};
6618e478 DA	314	};
6618e478 DA	315
83a742b4 DA	316	usb {
	317	host_vbus_drv: host-vbus-drv {
	318	rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
	319	};
	320	};
e35e47ac RC	321
	322	eth_phy {
	323	eth_phy_pwr: eth-phy-pwr {
	324	rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
	325	};
	326	};
6ce0562a	327	};
163cb917	328
e537c9cc YL	329	&usbphy {
	330	status = "okay";
	331	};
	332
163cb917 DA	333	&usb_host0_ehci {
	334	status = "okay";
	335	};
ddf8303f KY	336
	337	&usb_host1 {
	338	status = "okay";
	339	};
863b76b2 HS	340
	341	&vopb {
	342	status = "okay";
	343	};
	344
	345	&vopb_mmu {
	346	status = "okay";
	347	};
	348
	349	&vopl {
	350	status = "okay";
	351	};
	352
	353	&vopl_mmu {
	354	status = "okay";
	355	};