[mirror_ubuntu-focal-kernel.git] / arch / arm / boot / dts / rk3288-evb.dtsi

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>
#include "rk3288.dtsi"

/ {
	memory@0 {
		device_type = "memory";
		reg = <0x0 0x0 0x0 0x80000000>;
	};

	adc-keys {
		compatible = "adc-keys";
		io-channels = <&saradc 1>;
		io-channel-names = "buttons";
		keyup-threshold-microvolt = <1800000>;

		button-up {
			label = "Volume Up";
			linux,code = <KEY_VOLUMEUP>;
			press-threshold-microvolt = <100000>;
		};

		button-down {
			label = "Volume Down";
			linux,code = <KEY_VOLUMEDOWN>;
			press-threshold-microvolt = <300000>;
		};

		menu {
			label = "Menu";
			linux,code = <KEY_MENU>;
			press-threshold-microvolt = <640000>;
		};

		esc {
			label = "Esc";
			linux,code = <KEY_ESC>;
			press-threshold-microvolt = <1000000>;
		};

		home  {
			label = "Home";
			linux,code = <KEY_HOME>;
			press-threshold-microvolt = <1300000>;
		};
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		brightness-levels = <
			  0   1   2   3   4   5   6   7
			  8   9  10  11  12  13  14  15
			 16  17  18  19  20  21  22  23
			 24  25  26  27  28  29  30  31
			 32  33  34  35  36  37  38  39
			 40  41  42  43  44  45  46  47
			 48  49  50  51  52  53  54  55
			 56  57  58  59  60  61  62  63
			 64  65  66  67  68  69  70  71
			 72  73  74  75  76  77  78  79
			 80  81  82  83  84  85  86  87
			 88  89  90  91  92  93  94  95
			 96  97  98  99 100 101 102 103
			104 105 106 107 108 109 110 111
			112 113 114 115 116 117 118 119
			120 121 122 123 124 125 126 127
			128 129 130 131 132 133 134 135
			136 137 138 139 140 141 142 143
			144 145 146 147 148 149 150 151
			152 153 154 155 156 157 158 159
			160 161 162 163 164 165 166 167
			168 169 170 171 172 173 174 175
			176 177 178 179 180 181 182 183
			184 185 186 187 188 189 190 191
			192 193 194 195 196 197 198 199
			200 201 202 203 204 205 206 207
			208 209 210 211 212 213 214 215
			216 217 218 219 220 221 222 223
			224 225 226 227 228 229 230 231
			232 233 234 235 236 237 238 239
			240 241 242 243 244 245 246 247
			248 249 250 251 252 253 254 255>;
		default-brightness-level = <128>;
		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&bl_en>;
		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
	};

	ext_gmac: external-gmac-clock {
		compatible = "fixed-clock";
		clock-frequency = <125000000>;
		clock-output-names = "ext_gmac";
		#clock-cells = <0>;
	};

	panel: panel {
		compatible = "lg,lp079qx1-sp0v", "simple-panel";
		backlight = <&backlight>;
		enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&lcd_cs>;

		ports {
			panel_in: port {
				panel_in_edp: endpoint {
					remote-endpoint = <&edp_out_panel>;
				};
			};
		};
	};

	gpio-keys {
		compatible = "gpio-keys";
		autorepeat;

		pinctrl-names = "default";
		pinctrl-0 = <&pwrbtn>;

		power {
			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
			label = "GPIO Key Power";
			linux,input-type = <1>;
			wakeup-source;
			debounce-interval = <100>;
		};
	};

	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
	vcc_host: vcc-host-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&host_vbus_drv>;
		regulator-name = "vcc_host";
		regulator-always-on;
		regulator-boot-on;
	};

	vcc_phy: vcc-phy-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&eth_phy_pwr>;
		regulator-name = "vcc_phy";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vcc_sys: vsys-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sys";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	/*
	 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
	 * vcc_io directly.  Those boards won't be able to power cycle SD cards
	 * but it shouldn't hurt to toggle this pin there anyway.
	 */
	vcc_sd: sdmmc-regulator {
		compatible = "regulator-fixed";
		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&sdmmc_pwr>;
		regulator-name = "vcc_sd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100000>;
		vin-supply = <&vcc_io>;
	};
};

&cpu0 {
	cpu0-supply = <&vdd_cpu>;
};

&edp {
	force-hpd;
	status = "okay";

	ports {
		edp_out: port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			edp_out_panel: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&panel_in_edp>;
			};
		};
	};
};

&edp_phy {
	status = "okay";
};

&emmc {
	bus-width = <8>;
	cap-mmc-highspeed;
	disable-wp;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
	status = "okay";
};

&saradc {
	vref-supply = <&vcc_18>;
	status = "okay";
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	card-detect-delay = <200>;
	disable-wp;			/* wp not hooked up */
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
	status = "okay";
	vmmc-supply = <&vcc_sd>;
	vqmmc-supply = <&vccio_sd>;
};

&gmac {
	phy-supply = <&vcc_phy>;
	phy-mode = "rgmii";
	clock_in_out = "input";
	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
	snps,reset-active-low;
	snps,reset-delays-us = <0 10000 1000000>;
	assigned-clocks = <&cru SCLK_MAC>;
	assigned-clock-parents = <&ext_gmac>;
	pinctrl-names = "default";
	pinctrl-0 = <&rgmii_pins>;
	tx_delay = <0x30>;
	rx_delay = <0x10>;
	status = "ok";
};

&gpu {
	mali-supply = <&vdd_gpu>;
	status = "okay";
};

&hdmi {
	ddc-i2c-bus = <&i2c5>;
	status = "okay";
};

&i2c0 {
	status = "okay";
};

&i2c5 {
	status = "okay";
};

&wdt {
	status = "okay";
};

&pwm0 {
	status = "okay";
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&uart4 {
	status = "okay";
};

&tsadc {
	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
	status = "okay";
};

&pinctrl {
	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
		drive-strength = <8>;
	};

	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
		bias-pull-up;
		drive-strength = <8>;
	};

	backlight {
		bl_en: bl-en {
			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	buttons {
		pwrbtn: pwrbtn {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	lcd {
		lcd_cs: lcd-cs {
			rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pmic {
		pmic_int: pmic-int {
			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sdmmc {
		/*
		 * Default drive strength isn't enough to achieve even
		 * high-speed mode on EVB board so bump up to 8ma.
		 */
		sdmmc_bus4: sdmmc-bus4 {
			rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
					<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
					<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
					<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
		};

		sdmmc_clk: sdmmc-clk {
			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
		};

		sdmmc_cmd: sdmmc-cmd {
			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
		};

		sdmmc_pwr: sdmmc-pwr {
			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		host_vbus_drv: host-vbus-drv {
			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	eth_phy {
		eth_phy_pwr: eth-phy-pwr {
			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&usbphy {
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host1 {
	status = "okay";
};

&vopb {
	status = "okay";
};

&vopb_mmu {
	status = "okay";
};

&vopl {
	status = "okay";
};

&vopl_mmu {
	status = "okay";
};
Commit	Line	Data
fce152a6	1	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6ce0562a	2
8b30c899	3	#include <dt-bindings/input/input.h>
0541f94f	4	#include <dt-bindings/pwm/pwm.h>
6ce0562a HS	5	#include "rk3288.dtsi"
	6
	7	/ {
0b639b81	8	memory@0 {
6158e6d0	9	device_type = "memory";
79db45be	10	reg = <0x0 0x0 0x0 0x80000000>;
6ce0562a HS	11	};
6ce0562a HS	12
ef93f751 JC	13	adc-keys {
	14	compatible = "adc-keys";
	15	io-channels = <&saradc 1>;
	16	io-channel-names = "buttons";
	17	keyup-threshold-microvolt = <1800000>;
	18
	19	button-up {
	20	label = "Volume Up";
	21	linux,code = <KEY_VOLUMEUP>;
	22	press-threshold-microvolt = <100000>;
	23	};
	24
	25	button-down {
	26	label = "Volume Down";
	27	linux,code = <KEY_VOLUMEDOWN>;
	28	press-threshold-microvolt = <300000>;
	29	};
	30
	31	menu {
	32	label = "Menu";
	33	linux,code = <KEY_MENU>;
	34	press-threshold-microvolt = <640000>;
	35	};
	36
	37	esc {
	38	label = "Esc";
	39	linux,code = <KEY_ESC>;
	40	press-threshold-microvolt = <1000000>;
	41	};
	42
	43	home {
	44	label = "Home";
	45	linux,code = <KEY_HOME>;
	46	press-threshold-microvolt = <1300000>;
	47	};
	48	};
	49
d4da5121	50	backlight: backlight {
0541f94f DA	51	compatible = "pwm-backlight";
	52	brightness-levels = <
	53	0 1 2 3 4 5 6 7
	54	8 9 10 11 12 13 14 15
	55	16 17 18 19 20 21 22 23
	56	24 25 26 27 28 29 30 31
	57	32 33 34 35 36 37 38 39
	58	40 41 42 43 44 45 46 47
	59	48 49 50 51 52 53 54 55
	60	56 57 58 59 60 61 62 63
	61	64 65 66 67 68 69 70 71
	62	72 73 74 75 76 77 78 79
	63	80 81 82 83 84 85 86 87
	64	88 89 90 91 92 93 94 95
	65	96 97 98 99 100 101 102 103
	66	104 105 106 107 108 109 110 111
	67	112 113 114 115 116 117 118 119
	68	120 121 122 123 124 125 126 127
	69	128 129 130 131 132 133 134 135
	70	136 137 138 139 140 141 142 143
	71	144 145 146 147 148 149 150 151
	72	152 153 154 155 156 157 158 159
	73	160 161 162 163 164 165 166 167
	74	168 169 170 171 172 173 174 175
	75	176 177 178 179 180 181 182 183
	76	184 185 186 187 188 189 190 191
	77	192 193 194 195 196 197 198 199
	78	200 201 202 203 204 205 206 207
	79	208 209 210 211 212 213 214 215
	80	216 217 218 219 220 221 222 223
	81	224 225 226 227 228 229 230 231
	82	232 233 234 235 236 237 238 239
	83	240 241 242 243 244 245 246 247
	84	248 249 250 251 252 253 254 255>;
	85	default-brightness-level = <128>;
e9e79d53	86	enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
0541f94f DA	87	pinctrl-names = "default";
	88	pinctrl-0 = <&bl_en>;
	89	pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
	90	};
	91
b04061e6 CZ	92	ext_gmac: external-gmac-clock {
	93	compatible = "fixed-clock";
	94	clock-frequency = <125000000>;
	95	clock-output-names = "ext_gmac";
	96	#clock-cells = <0>;
	97	};
	98
d4da5121	99	panel: panel {
a5021c45	100	compatible = "lg,lp079qx1-sp0v", "simple-panel";
d4da5121	101	backlight = <&backlight>;
e9e79d53	102	enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
d4da5121 YY	103	pinctrl-0 = <&lcd_cs>;
	104
	105	ports {
	106	panel_in: port {
	107	panel_in_edp: endpoint {
	108	remote-endpoint = <&edp_out_panel>;
	109	};
	110	};
	111	};
	112	};
	113
6ce0562a HS	114	gpio-keys {
6ce0562a HS	115	compatible = "gpio-keys";
6ce0562a HS	116	autorepeat;
	117
	118	pinctrl-names = "default";
	119	pinctrl-0 = <&pwrbtn>;
	120
8b30c899	121	power {
e9e79d53	122	gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
8b30c899	123	linux,code = <KEY_POWER>;
6ce0562a HS	124	label = "GPIO Key Power";
6ce0562a HS	125	linux,input-type = <1>;
4f66f247	126	wakeup-source;
6ce0562a HS	127	debounce-interval = <100>;
	128	};
	129	};
83a742b4 DA	130
	131	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
	132	vcc_host: vcc-host-regulator {
	133	compatible = "regulator-fixed";
	134	enable-active-high;
e9e79d53	135	gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
83a742b4 DA	136	pinctrl-names = "default";
	137	pinctrl-0 = <&host_vbus_drv>;
	138	regulator-name = "vcc_host";
	139	regulator-always-on;
	140	regulator-boot-on;
	141	};
e35e47ac RC	142
	143	vcc_phy: vcc-phy-regulator {
	144	compatible = "regulator-fixed";
	145	enable-active-high;
e9e79d53	146	gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
e35e47ac RC	147	pinctrl-names = "default";
	148	pinctrl-0 = <&eth_phy_pwr>;
	149	regulator-name = "vcc_phy";
68c3a884 RP	150	regulator-min-microvolt = <3300000>;
68c3a884 RP	151	regulator-max-microvolt = <3300000>;
e35e47ac RC	152	regulator-always-on;
	153	regulator-boot-on;
	154	};
91d5cb73 HS	155
	156	vcc_sys: vsys-regulator {
	157	compatible = "regulator-fixed";
	158	regulator-name = "vcc_sys";
	159	regulator-min-microvolt = <5000000>;
	160	regulator-max-microvolt = <5000000>;
	161	regulator-always-on;
	162	regulator-boot-on;
	163	};
e565abe1 DA	164
	165	/*
	166	* NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
	167	* vcc_io directly. Those boards won't be able to power cycle SD cards
	168	* but it shouldn't hurt to toggle this pin there anyway.
	169	*/
	170	vcc_sd: sdmmc-regulator {
	171	compatible = "regulator-fixed";
e9e79d53	172	gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
e565abe1 DA	173	pinctrl-names = "default";
	174	pinctrl-0 = <&sdmmc_pwr>;
	175	regulator-name = "vcc_sd";
	176	regulator-min-microvolt = <3300000>;
	177	regulator-max-microvolt = <3300000>;
	178	startup-delay-us = <100000>;
	179	vin-supply = <&vcc_io>;
	180	};
6ce0562a HS	181	};
6ce0562a HS	182
b04061e6 CZ	183	&cpu0 {
	184	cpu0-supply = <&vdd_cpu>;
	185	};
	186
d4da5121 YY	187	&edp {
	188	force-hpd;
	189	status = "okay";
	190
	191	ports {
	192	edp_out: port@1 {
	193	reg = <1>;
	194	#address-cells = <1>;
	195	#size-cells = <0>;
	196
cddb8683	197	edp_out_panel: endpoint@0 {
d4da5121 YY	198	reg = <0>;
	199	remote-endpoint = <&panel_in_edp>;
	200	};
	201	};
	202	};
	203	};
	204
	205	&edp_phy {
	206	status = "okay";
	207	};
	208
2c31d949	209	&emmc {
2c31d949 DA	210	bus-width = <8>;
	211	cap-mmc-highspeed;
	212	disable-wp;
	213	non-removable;
2c31d949 DA	214	pinctrl-names = "default";
	215	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
	216	status = "okay";
	217	};
	218
849f0553 JC	219	&saradc {
	220	vref-supply = <&vcc_18>;
	221	status = "okay";
	222	};
	223
2c31d949 DA	224	&sdmmc {
	225	bus-width = <4>;
	226	cap-mmc-highspeed;
	227	cap-sd-highspeed;
	228	card-detect-delay = <200>;
	229	disable-wp; /* wp not hooked up */
2c31d949 DA	230	pinctrl-names = "default";
	231	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
	232	status = "okay";
e565abe1 DA	233	vmmc-supply = <&vcc_sd>;
e565abe1 DA	234	vqmmc-supply = <&vccio_sd>;
2c31d949 DA	235	};
2c31d949 DA	236
b04061e6 CZ	237	&gmac {
	238	phy-supply = <&vcc_phy>;
	239	phy-mode = "rgmii";
	240	clock_in_out = "input";
e9e79d53	241	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
b04061e6 CZ	242	snps,reset-active-low;
	243	snps,reset-delays-us = <0 10000 1000000>;
	244	assigned-clocks = <&cru SCLK_MAC>;
	245	assigned-clock-parents = <&ext_gmac>;
	246	pinctrl-names = "default";
	247	pinctrl-0 = <&rgmii_pins>;
	248	tx_delay = <0x30>;
	249	rx_delay = <0x10>;
	250	status = "ok";
	251	};
	252
02b12d6a JC	253	&gpu {
	254	mali-supply = <&vdd_gpu>;
	255	status = "okay";
	256	};
	257
b04061e6 CZ	258	&hdmi {
	259	ddc-i2c-bus = <&i2c5>;
	260	status = "okay";
	261	};
	262
6ce0562a HS	263	&i2c0 {
	264	status = "okay";
	265	};
	266
863b76b2 HS	267	&i2c5 {
	268	status = "okay";
	269	};
	270
6ce0562a HS	271	&wdt {
	272	status = "okay";
	273	};
	274
0541f94f DA	275	&pwm0 {
	276	status = "okay";
	277	};
	278
6ce0562a HS	279	&uart0 {
	280	status = "okay";
	281	};
	282
	283	&uart1 {
	284	status = "okay";
	285	};
	286
	287	&uart2 {
	288	status = "okay";
	289	};
	290
	291	&uart3 {
	292	status = "okay";
	293	};
	294
	295	&uart4 {
	296	status = "okay";
	297	};
	298
ff9d0ecb CW	299	&tsadc {
	300	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
	301	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
	302	status = "okay";
	303	};
	304
6ce0562a	305	&pinctrl {
6618e478 DA	306	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
	307	drive-strength = <8>;
	308	};
	309
	310	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
	311	bias-pull-up;
	312	drive-strength = <8>;
	313	};
	314
0541f94f DA	315	backlight {
0541f94f DA	316	bl_en: bl-en {
07f08d9c	317	rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
0541f94f DA	318	};
	319	};
	320
6ce0562a HS	321	buttons {
6ce0562a HS	322	pwrbtn: pwrbtn {
07f08d9c	323	rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
6ce0562a HS	324	};
6ce0562a HS	325	};
83a742b4	326
d4da5121 YY	327	lcd {
d4da5121 YY	328	lcd_cs: lcd-cs {
07f08d9c	329	rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
d4da5121 YY	330	};
	331	};
	332
91ff8cd8 DA	333	pmic {
91ff8cd8 DA	334	pmic_int: pmic-int {
07f08d9c	335	rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
91ff8cd8 DA	336	};
	337	};
	338
6618e478 DA	339	sdmmc {
	340	/*
	341	* Default drive strength isn't enough to achieve even
	342	* high-speed mode on EVB board so bump up to 8ma.
	343	*/
	344	sdmmc_bus4: sdmmc-bus4 {
07f08d9c HS	345	rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
	346	<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
	347	<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
	348	<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
6618e478 DA	349	};
	350
	351	sdmmc_clk: sdmmc-clk {
07f08d9c	352	rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
6618e478 DA	353	};
	354
	355	sdmmc_cmd: sdmmc-cmd {
07f08d9c	356	rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
6618e478	357	};
e565abe1 DA	358
e565abe1 DA	359	sdmmc_pwr: sdmmc-pwr {
07f08d9c	360	rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
e565abe1	361	};
6618e478 DA	362	};
6618e478 DA	363
83a742b4 DA	364	usb {
83a742b4 DA	365	host_vbus_drv: host-vbus-drv {
07f08d9c	366	rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
83a742b4 DA	367	};
83a742b4 DA	368	};
e35e47ac RC	369
	370	eth_phy {
	371	eth_phy_pwr: eth-phy-pwr {
07f08d9c	372	rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
e35e47ac RC	373	};
e35e47ac RC	374	};
6ce0562a	375	};
163cb917	376
e537c9cc YL	377	&usbphy {
	378	status = "okay";
	379	};
	380
163cb917 DA	381	&usb_host0_ehci {
	382	status = "okay";
	383	};
ddf8303f KY	384
	385	&usb_host1 {
	386	status = "okay";
	387	};
863b76b2 HS	388
	389	&vopb {
	390	status = "okay";
	391	};
	392
	393	&vopb_mmu {
	394	status = "okay";
	395	};
	396
	397	&vopl {
	398	status = "okay";
	399	};
	400
	401	&vopl_mmu {
	402	status = "okay";
	403	};