]>
Commit | Line | Data |
---|---|---|
81507732 WE |
1 | /* |
2 | * Device tree file for Phytec PCM-947 carrier board | |
3 | * Copyright (C) 2017 PHYTEC Messtechnik GmbH | |
4 | * Author: Wadim Egorov <w.egorov@phytec.de> | |
5 | * | |
6 | * This file is dual-licensed: you can use it either under the terms | |
7 | * of the GPL or the X11 license, at your option. Note that this dual | |
8 | * licensing only applies to this file, and not this project as a | |
9 | * whole. | |
10 | * | |
11 | * a) This file is free software; you can redistribute it and/or | |
12 | * modify it under the terms of the GNU General Public License as | |
13 | * published by the Free Software Foundation; either version 2 of the | |
14 | * License, or (at your option) any later version. | |
15 | * | |
16 | * This file is distributed in the hope that it will be useful, | |
17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 | * GNU General Public License for more details. | |
20 | * | |
21 | * Or, alternatively, | |
22 | * | |
23 | * b) Permission is hereby granted, free of charge, to any person | |
24 | * obtaining a copy of this software and associated documentation | |
25 | * files (the "Software"), to deal in the Software without | |
26 | * restriction, including without limitation the rights to use, | |
27 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
28 | * sell copies of the Software, and to permit persons to whom the | |
29 | * Software is furnished to do so, subject to the following | |
30 | * conditions: | |
31 | * | |
32 | * The above copyright notice and this permission notice shall be | |
33 | * included in all copies or substantial portions of the Software. | |
34 | * | |
35 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
36 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
37 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
38 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
39 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
40 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
41 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
42 | * OTHER DEALINGS IN THE SOFTWARE. | |
43 | */ | |
44 | ||
45 | /dts-v1/; | |
46 | ||
47 | #include <dt-bindings/input/input.h> | |
48 | #include <dt-bindings/leds/leds-pca9532.h> | |
49 | #include "rk3288-phycore-som.dtsi" | |
50 | ||
51 | / { | |
52 | model = "Phytec RK3288 PCM-947"; | |
53 | compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288"; | |
54 | ||
55 | user_buttons: user-buttons { | |
56 | compatible = "gpio-keys"; | |
57 | pinctrl-names = "default"; | |
58 | pinctrl-0 = <&user_button_pins>; | |
59 | ||
60 | button@0 { | |
61 | label = "home"; | |
62 | linux,code = <KEY_HOME>; | |
63 | gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; | |
64 | wakeup-source; | |
65 | }; | |
66 | ||
67 | button@1 { | |
68 | label = "menu"; | |
69 | linux,code = <KEY_MENU>; | |
70 | gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; | |
71 | wakeup-source; | |
72 | }; | |
73 | }; | |
74 | ||
75 | vcc_host0_5v: usb-host0-regulator { | |
76 | compatible = "regulator-fixed"; | |
77 | gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; | |
78 | pinctrl-names = "default"; | |
79 | pinctrl-0 = <&host0_vbus_drv>; | |
80 | regulator-name = "vcc_host0_5v"; | |
81 | regulator-min-microvolt = <5000000>; | |
82 | regulator-max-microvolt = <5000000>; | |
83 | regulator-always-on; | |
84 | vin-supply = <&vdd_in_otg_out>; | |
85 | }; | |
86 | ||
87 | vcc_host1_5v: usb-host1-regulator { | |
88 | compatible = "regulator-fixed"; | |
89 | gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; | |
90 | pinctrl-names = "default"; | |
91 | pinctrl-0 = <&host1_vbus_drv>; | |
92 | regulator-name = "vcc_host1_5v"; | |
93 | regulator-min-microvolt = <5000000>; | |
94 | regulator-max-microvolt = <5000000>; | |
95 | regulator-always-on; | |
96 | vin-supply = <&vdd_in_otg_out>; | |
97 | }; | |
98 | ||
99 | vcc_otg_5v: usb-otg-regulator { | |
100 | compatible = "regulator-fixed"; | |
101 | gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; | |
102 | pinctrl-names = "default"; | |
103 | pinctrl-0 = <&otg_vbus_drv>; | |
104 | regulator-name = "vcc_otg_5v"; | |
105 | regulator-min-microvolt = <5000000>; | |
106 | regulator-max-microvolt = <5000000>; | |
107 | regulator-always-on; | |
108 | vin-supply = <&vdd_in_otg_out>; | |
109 | }; | |
110 | }; | |
111 | ||
112 | &gmac { | |
113 | status = "okay"; | |
114 | }; | |
115 | ||
116 | &hdmi { | |
117 | status = "okay"; | |
118 | }; | |
119 | ||
120 | &i2c1 { | |
121 | status = "okay"; | |
122 | ||
123 | touchscreen@44 { | |
124 | compatible = "st,stmpe811"; | |
125 | reg = <0x44>; | |
126 | }; | |
127 | ||
128 | adc@64 { | |
129 | compatible = "maxim,max1037"; | |
130 | reg = <0x64>; | |
131 | }; | |
132 | ||
133 | i2c_rtc: rtc@68 { | |
134 | compatible = "rv4162"; | |
135 | reg = <0x68>; | |
136 | pinctrl-names = "default"; | |
137 | pinctrl-0 = <&i2c_rtc_int>; | |
138 | interrupt-parent = <&gpio5>; | |
139 | interrupts = <10 0>; | |
140 | }; | |
141 | }; | |
142 | ||
143 | &i2c3 { | |
144 | status = "okay"; | |
145 | ||
146 | i2c_eeprom_cb: eeprom@51 { | |
147 | compatible = "atmel,24c32"; | |
148 | reg = <0x51>; | |
149 | pagesize = <32>; | |
150 | }; | |
151 | }; | |
152 | ||
153 | &i2c4 { | |
154 | status = "okay"; | |
155 | ||
156 | /* PCA9533 - 4-bit LED dimmer */ | |
157 | leddim: leddimmer@62 { | |
158 | compatible = "nxp,pca9533"; | |
159 | reg = <0x62>; | |
160 | ||
161 | led1 { | |
162 | label = "red:user1"; | |
163 | linux,default-trigger = "none"; | |
164 | type = <PCA9532_TYPE_LED>; | |
165 | }; | |
166 | ||
167 | led2 { | |
168 | label = "green:user2"; | |
169 | linux,default-trigger = "none"; | |
170 | type = <PCA9532_TYPE_LED>; | |
171 | }; | |
172 | ||
173 | led3 { | |
174 | label = "blue:user3"; | |
175 | linux,default-trigger = "none"; | |
176 | type = <PCA9532_TYPE_LED>; | |
177 | }; | |
178 | ||
179 | led4 { | |
180 | label = "red:user4"; | |
181 | linux,default-trigger = "none"; | |
182 | type = <PCA9532_TYPE_LED>; | |
183 | }; | |
184 | }; | |
185 | }; | |
186 | ||
187 | &i2c5 { | |
188 | status = "okay"; | |
189 | }; | |
190 | ||
191 | &pinctrl { | |
192 | pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma { | |
193 | bias-pull-up; | |
194 | drive-strength = <12>; | |
195 | }; | |
196 | ||
197 | buttons { | |
198 | user_button_pins: user-button-pins { | |
199 | /* button 1 */ | |
200 | rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>, | |
201 | /* button 2 */ | |
202 | <8 0 RK_FUNC_GPIO &pcfg_pull_up>; | |
203 | }; | |
204 | }; | |
205 | ||
206 | rv4162 { | |
207 | i2c_rtc_int: i2c-rtc-int { | |
208 | rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; | |
209 | }; | |
210 | }; | |
211 | ||
212 | sdmmc { | |
213 | /* | |
214 | * Default drive strength isn't enough to achieve even | |
215 | * high-speed mode on pcm-947 board so bump up to 12 mA. | |
216 | */ | |
217 | sdmmc_bus4: sdmmc-bus4 { | |
218 | rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, | |
219 | <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, | |
220 | <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>, | |
221 | <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; | |
222 | }; | |
223 | ||
224 | sdmmc_clk: sdmmc-clk { | |
225 | rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>; | |
226 | }; | |
227 | ||
228 | sdmmc_cmd: sdmmc-cmd { | |
229 | rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>; | |
230 | }; | |
231 | ||
232 | sdmmc_pwr: sdmmc-pwr { | |
233 | rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; | |
234 | }; | |
235 | }; | |
236 | ||
237 | touchscreen { | |
238 | ts_irq_pin: ts-irq-pin { | |
239 | rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>; | |
240 | }; | |
241 | }; | |
242 | ||
243 | usb_host { | |
244 | host0_vbus_drv: host0-vbus-drv { | |
245 | rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; | |
246 | }; | |
247 | ||
248 | host1_vbus_drv: host1-vbus-drv { | |
249 | rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>; | |
250 | }; | |
251 | }; | |
252 | ||
253 | usb_otg { | |
254 | otg_vbus_drv: otg-vbus-drv { | |
255 | rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; | |
256 | }; | |
257 | }; | |
258 | }; | |
259 | ||
260 | &sdmmc { | |
261 | bus-width = <4>; | |
262 | cap-mmc-highspeed; | |
263 | cap-sd-highspeed; | |
264 | card-detect-delay = <200>; | |
265 | disable-wp; | |
81507732 WE |
266 | pinctrl-names = "default"; |
267 | pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; | |
268 | vmmc-supply = <&vdd_io_sd>; | |
269 | vqmmc-supply = <&vdd_io_sd>; | |
270 | status = "okay"; | |
271 | }; | |
272 | ||
273 | &uart0 { | |
274 | pinctrl-names = "default"; | |
275 | pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; | |
276 | status = "okay"; | |
277 | }; | |
278 | ||
279 | &uart2 { | |
280 | status = "okay"; | |
281 | }; | |
282 | ||
283 | &usbphy { | |
284 | status = "okay"; | |
285 | }; | |
286 | ||
287 | &usb_host0_ehci { | |
288 | status = "okay"; | |
289 | }; | |
290 | ||
291 | &usb_host1 { | |
292 | status = "okay"; | |
293 | }; | |
294 | ||
295 | &usb_otg { | |
296 | status = "okay"; | |
297 | }; |