[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / s5pv210-goni.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Samsung's S5PV210 SoC device tree source
 *
 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
 *
 * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
 * Tomasz Figa <t.figa@samsung.com>
 *
 * Board device tree source for Samsung Goni board.
 */

/dts-v1/;
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"

/ {
	model = "Samsung Goni based on S5PC110";
	compatible = "samsung,goni", "samsung,s5pv210";

	aliases {
		i2c3 = &i2c_pmic;
	};

	chosen {
		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
	};

	memory@30000000 {
		device_type = "memory";
		reg = <0x30000000 0x05000000
			0x40000000 0x10000000
			0x50000000 0x08000000>;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		vtf_reg: fixed-regulator@0 {
			compatible = "regulator-fixed";
			regulator-name = "V_TF_2.8V";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			reg = <0>;
			gpio = <&mp05 4 0>;
			enable-active-high;
		};

		pda_reg: fixed-regulator@1 {
			compatible = "regulator-fixed";
			regulator-name = "VCC_1.8V_PDA";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			reg = <1>;
		};

		bat_reg: fixed-regulator@2 {
			compatible = "regulator-fixed";
			regulator-name = "V_BAT";
			regulator-min-microvolt = <3700000>;
			regulator-max-microvolt = <3700000>;
			reg = <2>;
		};

		tsp_reg: fixed-regulator@3 {
			compatible = "regulator-fixed";
			regulator-name = "TSP_VDD";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			reg = <3>;
			gpio = <&gpj1 3 0>;
			enable-active-high;
		};
	};

	i2c_pmic: i2c-pmic {
		compatible = "i2c-gpio";
		gpios = <&gpj4 0 0>, /* sda */
			<&gpj4 3 0>; /* scl */
		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
		#address-cells = <1>;
		#size-cells = <0>;

		pmic@66 {
			compatible = "national,lp3974";
			reg = <0x66>;

			max8998,pmic-buck1-default-dvs-idx = <0>;
			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
							<&gph0 4 0>;
			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
							<1200000>, <1200000>;

			max8998,pmic-buck2-default-dvs-idx = <0>;
			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;

			regulators {
				ldo2_reg: LDO2 {
					regulator-name = "VALIVE_1.1V";
					regulator-min-microvolt = <1100000>;
					regulator-max-microvolt = <1100000>;
					regulator-always-on;
				};

				ldo3_reg: LDO3 {
					regulator-name = "VUSB+MIPI_1.1V";
					regulator-min-microvolt = <1100000>;
					regulator-max-microvolt = <1100000>;
					regulator-always-on;
				};

				ldo4_reg: LDO4 {
					regulator-name = "VADC_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo5_reg: LDO5 {
					regulator-name = "VTF_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo6_reg: LDO6 {
					regulator-name = "VCC_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo7_reg: LDO7 {
					regulator-name = "VLCD_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				ldo8_reg: LDO8 {
					regulator-name = "VUSB+VDAC_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo9_reg: LDO9 {
					regulator-name = "VCC+VCAM_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo10_reg: LDO10 {
					regulator-name = "VPLL_1.1V";
					regulator-min-microvolt = <1100000>;
					regulator-max-microvolt = <1100000>;
					regulator-boot-on;
				};

				ldo11_reg: LDO11 {
					regulator-name = "CAM_IO_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo12_reg: LDO12 {
					regulator-name = "CAM_ISP_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				ldo13_reg: LDO13 {
					regulator-name = "CAM_A_2.8V";
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2800000>;
				};

				ldo14_reg: LDO14 {
					regulator-name = "CAM_CIF_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo15_reg: LDO15 {
					regulator-name = "CAM_AF_3.3V";
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				ldo16_reg: LDO16 {
					regulator-name = "VMIPI_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				ldo17_reg: LDO17 {
					regulator-name = "CAM_8M_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				buck1_reg: BUCK1 {
					regulator-name = "VARM_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				buck2_reg: BUCK2 {
					regulator-name = "VINT_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				buck3_reg: BUCK3 {
					regulator-name = "VCC_1.8V";
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
					regulator-always-on;
				};

				buck4_reg: BUCK4 {
					regulator-name = "CAM_CORE_1.2V";
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
					regulator-always-on;
				};
			};
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		power-key {
			gpios = <&gph2 6 1>;
			linux,code = <KEY_POWER>;
			label = "power";
			debounce-interval = <1>;
			wakeup-source;
		};
	};
};

&xusbxti {
	clock-frequency = <24000000>;
};

&keypad {
	linux,input-no-autorepeat;
	wakeup-source;
	samsung,keypad-num-rows = <3>;
	samsung,keypad-num-columns = <3>;
	pinctrl-names = "default";
	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
	status = "okay";

	key_1 {
		keypad,row = <0>;
		keypad,column = <1>;
		linux,code = <KEY_CONNECT>;
	};

	key_2 {
		keypad,row = <0>;
		keypad,column = <2>;
		linux,code = <KEY_BACK>;
	};

	key_3 {
		keypad,row = <1>;
		keypad,column = <1>;
		linux,code = <KEY_CAMERA_FOCUS>;
	};

	key_4 {
		keypad,row = <1>;
		keypad,column = <2>;
		linux,code = <KEY_VOLUMEUP>;
	};

	key_5 {
		keypad,row = <2>;
		keypad,column = <1>;
		linux,code = <KEY_CAMERA>;
	};

	key_6 {
		keypad,row = <2>;
		keypad,column = <2>;
		linux,code = <KEY_VOLUMEDOWN>;
	};
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&uart3 {
	status = "okay";
};

&sdhci0 {
	bus-width = <4>;
	non-removable;
	vmmc-supply = <&ldo5_reg>;
	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&sdhci2 {
	bus-width = <4>;
	cd-gpios = <&gph3 4 1>;
	vmmc-supply = <&vtf_reg>;
	cd-inverted;
	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
	pinctrl-names = "default";
	status = "okay";
};

&hsotg {
	vusb_a-supply = <&ldo3_reg>;
	vusb_d-supply = <&ldo8_reg>;
	dr_mode = "peripheral";
	status = "okay";
};

&usbphy {
	status = "okay";
};

&i2c2 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-max-bus-freq = <400000>;
	samsung,i2c-slave-addr = <0x10>;
	status = "okay";

	tsp@4a {
		compatible = "atmel,maxtouch";
		reg = <0x4a>;
		interrupt-parent = <&gpj0>;
		interrupts = <5 2>;

		atmel,x-line = <17>;
		atmel,y-line = <11>;
		atmel,x-size = <800>;
		atmel,y-size = <480>;
		atmel,burst-length = <0x21>;
		atmel,threshold = <0x28>;
		atmel,orientation = <1>;

		vdd-supply = <&tsp_reg>;
	};
};

&i2c0 {
	samsung,i2c-sda-delay = <100>;
	samsung,i2c-max-bus-freq = <100000>;
	samsung,i2c-slave-addr = <0x10>;
	status = "okay";

	noon010pc30: sensor@30 {
		compatible = "siliconfile,noon010pc30";
		reg = <0x30>;
		vddio-supply = <&ldo11_reg>;
		vdda-supply = <&ldo13_reg>;
		vdd_core-supply = <&ldo14_reg>;

		clock-frequency = <16000000>;
		clocks = <&clock_cam 0>;
		clock-names = "mclk";
		nreset-gpios = <&gpb 2 0>;
		nstby-gpios = <&gpb 0 0>;

		port {
			noon010pc30_ep: endpoint {
				remote-endpoint = <&fimc0_ep>;
				bus-width = <8>;
				hsync-active = <0>;
				vsync-active = <1>;
				pclk-sample = <1>;
			};
		};
	};
};

&camera {
	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
	pinctrl-names = "default", "idle";

	parallel-ports {
		#address-cells = <1>;
		#size-cells = <0>;

		/* camera A input */
		port@1 {
			reg = <1>;
			fimc0_ep: endpoint {
				remote-endpoint = <&noon010pc30_ep>;
				bus-width = <8>;
				hsync-active = <1>;
				vsync-active = <1>;
				pclk-sample = <0>;
			};
		};
	};
};

&fimd {
	pinctrl-0 = <&lcd_clk &lcd_data24>;
	pinctrl-names = "default";
	status = "okay";

	display-timings {
		native-mode = <&timing0>;
		timing0: timing {
			/* 480x800@55Hz */
			clock-frequency = <23439570>;
			hactive = <480>;
			hfront-porch = <16>;
			hback-porch = <16>;
			hsync-len = <2>;
			vactive = <800>;
			vback-porch = <2>;
			vfront-porch = <28>;
			vsync-len = <1>;
			hsync-active = <0>;
			vsync-active = <0>;
			de-active = <0>;
			pixelclk-active = <0>;
		};
	};
};

&onenand {
	status = "okay";
};
Commit	Line	Data
e9c1fad0	1	// SPDX-License-Identifier: GPL-2.0
b672b27d MK	2	/*
	3	* Samsung's S5PV210 SoC device tree source
	4	*
	5	* Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
	6	*
	7	* Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
	8	* Tomasz Figa <t.figa@samsung.com>
	9	*
	10	* Board device tree source for Samsung Goni board.
b672b27d MK	11	*/
	12
	13	/dts-v1/;
	14	#include <dt-bindings/input/input.h>
	15	#include "s5pv210.dtsi"
	16
	17	/ {
	18	model = "Samsung Goni based on S5PC110";
	19	compatible = "samsung,goni", "samsung,s5pv210";
	20
	21	aliases {
	22	i2c3 = &i2c_pmic;
	23	};
	24
	25	chosen {
	26	bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
	27	};
	28
5271d002	29	memory@30000000 {
b672b27d MK	30	device_type = "memory";
	31	reg = <0x30000000 0x05000000
	32	0x40000000 0x10000000
	33	0x50000000 0x08000000>;
	34	};
	35
	36	regulators {
	37	compatible = "simple-bus";
	38	#address-cells = <1>;
	39	#size-cells = <0>;
	40
	41	vtf_reg: fixed-regulator@0 {
	42	compatible = "regulator-fixed";
	43	regulator-name = "V_TF_2.8V";
	44	regulator-min-microvolt = <2800000>;
	45	regulator-max-microvolt = <2800000>;
	46	reg = <0>;
1f7ce3d1	47	gpio = <&mp05 4 0>;
b672b27d MK	48	enable-active-high;
	49	};
	50
	51	pda_reg: fixed-regulator@1 {
	52	compatible = "regulator-fixed";
	53	regulator-name = "VCC_1.8V_PDA";
	54	regulator-min-microvolt = <1800000>;
	55	regulator-max-microvolt = <1800000>;
	56	reg = <1>;
	57	};
	58
	59	bat_reg: fixed-regulator@2 {
	60	compatible = "regulator-fixed";
	61	regulator-name = "V_BAT";
	62	regulator-min-microvolt = <3700000>;
	63	regulator-max-microvolt = <3700000>;
	64	reg = <2>;
	65	};
	66
	67	tsp_reg: fixed-regulator@3 {
	68	compatible = "regulator-fixed";
	69	regulator-name = "TSP_VDD";
	70	regulator-min-microvolt = <2800000>;
	71	regulator-max-microvolt = <2800000>;
	72	reg = <3>;
1f7ce3d1	73	gpio = <&gpj1 3 0>;
b672b27d MK	74	enable-active-high;
	75	};
	76	};
	77
	78	i2c_pmic: i2c-pmic {
	79	compatible = "i2c-gpio";
	80	gpios = <&gpj4 0 0>, /* sda */
	81	<&gpj4 3 0>; /* scl */
	82	i2c-gpio,delay-us = <2>; /* ~100 kHz */
	83	#address-cells = <1>;
	84	#size-cells = <0>;
	85
	86	pmic@66 {
	87	compatible = "national,lp3974";
	88	reg = <0x66>;
	89
	90	max8998,pmic-buck1-default-dvs-idx = <0>;
	91	max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
	92	<&gph0 4 0>;
	93	max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
	94	<1200000>, <1200000>;
	95
	96	max8998,pmic-buck2-default-dvs-idx = <0>;
	97	max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
	98	max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
	99
	100	regulators {
	101	ldo2_reg: LDO2 {
	102	regulator-name = "VALIVE_1.1V";
	103	regulator-min-microvolt = <1100000>;
	104	regulator-max-microvolt = <1100000>;
	105	regulator-always-on;
	106	};
	107
	108	ldo3_reg: LDO3 {
	109	regulator-name = "VUSB+MIPI_1.1V";
	110	regulator-min-microvolt = <1100000>;
	111	regulator-max-microvolt = <1100000>;
	112	regulator-always-on;
	113	};
	114
	115	ldo4_reg: LDO4 {
	116	regulator-name = "VADC_3.3V";
	117	regulator-min-microvolt = <3300000>;
	118	regulator-max-microvolt = <3300000>;
	119	};
	120
	121	ldo5_reg: LDO5 {
	122	regulator-name = "VTF_2.8V";
	123	regulator-min-microvolt = <2800000>;
	124	regulator-max-microvolt = <2800000>;
	125	};
	126
	127	ldo6_reg: LDO6 {
	128	regulator-name = "VCC_3.3V";
	129	regulator-min-microvolt = <3300000>;
	130	regulator-max-microvolt = <3300000>;
	131	};
	132
	133	ldo7_reg: LDO7 {
	134	regulator-name = "VLCD_1.8V";
	135	regulator-min-microvolt = <1800000>;
	136	regulator-max-microvolt = <1800000>;
	137	regulator-always-on;
138	};
139
140	ldo8_reg: LDO8 {
141	regulator-name = "VUSB+VDAC_3.3V";
142	regulator-min-microvolt = <3300000>;
143	regulator-max-microvolt = <3300000>;
144	};
145
146	ldo9_reg: LDO9 {
147	regulator-name = "VCC+VCAM_2.8V";
148	regulator-min-microvolt = <2800000>;
149	regulator-max-microvolt = <2800000>;
150	};
151
152	ldo10_reg: LDO10 {
153	regulator-name = "VPLL_1.1V";
154	regulator-min-microvolt = <1100000>;
155	regulator-max-microvolt = <1100000>;
156	regulator-boot-on;
157	};
158
159	ldo11_reg: LDO11 {
160	regulator-name = "CAM_IO_2.8V";
161	regulator-min-microvolt = <2800000>;
162	regulator-max-microvolt = <2800000>;
163	};
164
165	ldo12_reg: LDO12 {
166	regulator-name = "CAM_ISP_1.2V";
167	regulator-min-microvolt = <1200000>;
168	regulator-max-microvolt = <1200000>;
169	};
170
171	ldo13_reg: LDO13 {
172	regulator-name = "CAM_A_2.8V";
173	regulator-min-microvolt = <2800000>;
174	regulator-max-microvolt = <2800000>;
175	};
176
177	ldo14_reg: LDO14 {
178	regulator-name = "CAM_CIF_1.8V";
179	regulator-min-microvolt = <1800000>;
180	regulator-max-microvolt = <1800000>;
181	};
182
183	ldo15_reg: LDO15 {
184	regulator-name = "CAM_AF_3.3V";
185	regulator-min-microvolt = <3300000>;
186	regulator-max-microvolt = <3300000>;
187	};
188
189	ldo16_reg: LDO16 {
190	regulator-name = "VMIPI_1.8V";
191	regulator-min-microvolt = <1800000>;
192	regulator-max-microvolt = <1800000>;
193	};
194
195	ldo17_reg: LDO17 {
196	regulator-name = "CAM_8M_1.8V";
197	regulator-min-microvolt = <1800000>;
198	regulator-max-microvolt = <1800000>;
199	regulator-always-on;
200	};
201
202	buck1_reg: BUCK1 {
203	regulator-name = "VARM_1.2V";
204	regulator-min-microvolt = <1200000>;
205	regulator-max-microvolt = <1200000>;
206	};
207
208	buck2_reg: BUCK2 {
209	regulator-name = "VINT_1.2V";
210	regulator-min-microvolt = <1200000>;
211	regulator-max-microvolt = <1200000>;
212	};
213
214	buck3_reg: BUCK3 {
215	regulator-name = "VCC_1.8V";
216	regulator-min-microvolt = <1800000>;
217	regulator-max-microvolt = <1800000>;
218	regulator-always-on;
219	};
220
221	buck4_reg: BUCK4 {
222	regulator-name = "CAM_CORE_1.2V";
223	regulator-min-microvolt = <1200000>;
224	regulator-max-microvolt = <1200000>;
225	regulator-always-on;
226	};
227	};
228	};
229	};
230
231	gpio-keys {
232	compatible = "gpio-keys";
233
234	power-key {
235	gpios = <&gph2 6 1>;
236	linux,code = <KEY_POWER>;
237	label = "power";
238	debounce-interval = <1>;
14579412	239	wakeup-source;
b672b27d MK	240	};
	241	};
	242	};
	243
	244	&xusbxti {
	245	clock-frequency = <24000000>;
	246	};
	247
	248	&keypad {
	249	linux,input-no-autorepeat;
14579412	250	wakeup-source;
b672b27d MK	251	samsung,keypad-num-rows = <3>;
	252	samsung,keypad-num-columns = <3>;
	253	pinctrl-names = "default";
	254	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
	255	<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
	256	status = "okay";
	257
	258	key_1 {
	259	keypad,row = <0>;
	260	keypad,column = <1>;
	261	linux,code = <KEY_CONNECT>;
	262	};
	263
	264	key_2 {
	265	keypad,row = <0>;
	266	keypad,column = <2>;
	267	linux,code = <KEY_BACK>;
	268	};
	269
	270	key_3 {
	271	keypad,row = <1>;
	272	keypad,column = <1>;
	273	linux,code = <KEY_CAMERA_FOCUS>;
	274	};
	275
	276	key_4 {
	277	keypad,row = <1>;
	278	keypad,column = <2>;
	279	linux,code = <KEY_VOLUMEUP>;
	280	};
	281
	282	key_5 {
	283	keypad,row = <2>;
	284	keypad,column = <1>;
	285	linux,code = <KEY_CAMERA>;
	286	};
	287
	288	key_6 {
	289	keypad,row = <2>;
	290	keypad,column = <2>;
	291	linux,code = <KEY_VOLUMEDOWN>;
	292	};
	293	};
	294
	295	&uart0 {
	296	status = "okay";
	297	};
	298
	299	&uart1 {
	300	status = "okay";
	301	};
	302
	303	&uart2 {
	304	status = "okay";
	305	};
	306
	307	&uart3 {
	308	status = "okay";
	309	};
	310
	311	&sdhci0 {
	312	bus-width = <4>;
	313	non-removable;
	314	vmmc-supply = <&ldo5_reg>;
315	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
316	pinctrl-names = "default";
317	status = "okay";
318	};
319
320	&sdhci2 {
321	bus-width = <4>;
322	cd-gpios = <&gph3 4 1>;
323	vmmc-supply = <&vtf_reg>;
324	cd-inverted;
325	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
326	pinctrl-names = "default";
327	status = "okay";
328	};
329
330	&hsotg {
331	vusb_a-supply = <&ldo3_reg>;
332	vusb_d-supply = <&ldo8_reg>;
32f144f2	333	dr_mode = "peripheral";
b672b27d MK	334	status = "okay";
	335	};
	336
	337	&usbphy {
	338	status = "okay";
	339	};
	340
	341	&i2c2 {
	342	samsung,i2c-sda-delay = <100>;
	343	samsung,i2c-max-bus-freq = <400000>;
	344	samsung,i2c-slave-addr = <0x10>;
	345	status = "okay";
	346
	347	tsp@4a {
	348	compatible = "atmel,maxtouch";
	349	reg = <0x4a>;
	350	interrupt-parent = <&gpj0>;
	351	interrupts = <5 2>;
	352
	353	atmel,x-line = <17>;
	354	atmel,y-line = <11>;
	355	atmel,x-size = <800>;
	356	atmel,y-size = <480>;
	357	atmel,burst-length = <0x21>;
	358	atmel,threshold = <0x28>;
	359	atmel,orientation = <1>;
	360
	361	vdd-supply = <&tsp_reg>;
	362	};
	363	};
	364
	365	&i2c0 {
	366	samsung,i2c-sda-delay = <100>;
	367	samsung,i2c-max-bus-freq = <100000>;
	368	samsung,i2c-slave-addr = <0x10>;
	369	status = "okay";
	370
	371	noon010pc30: sensor@30 {
	372	compatible = "siliconfile,noon010pc30";
	373	reg = <0x30>;
	374	vddio-supply = <&ldo11_reg>;
	375	vdda-supply = <&ldo13_reg>;
	376	vdd_core-supply = <&ldo14_reg>;
	377
	378	clock-frequency = <16000000>;
	379	clocks = <&clock_cam 0>;
	380	clock-names = "mclk";
	381	nreset-gpios = <&gpb 2 0>;
	382	nstby-gpios = <&gpb 0 0>;
	383
	384	port {
	385	noon010pc30_ep: endpoint {
	386	remote-endpoint = <&fimc0_ep>;
	387	bus-width = <8>;
	388	hsync-active = <0>;
	389	vsync-active = <1>;
	390	pclk-sample = <1>;
	391	};
	392	};
	393	};
	394	};
	395
	396	&camera {
	397	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
398	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
399	pinctrl-names = "default", "idle";
400
401	parallel-ports {
402	#address-cells = <1>;
403	#size-cells = <0>;
404
405	/* camera A input */
406	port@1 {
407	reg = <1>;
408	fimc0_ep: endpoint {
409	remote-endpoint = <&noon010pc30_ep>;
410	bus-width = <8>;
411	hsync-active = <1>;
412	vsync-active = <1>;
413	pclk-sample = <0>;
414	};
415	};
416	};
417	};
418
419	&fimd {
420	pinctrl-0 = <&lcd_clk &lcd_data24>;
421	pinctrl-names = "default";
422	status = "okay";
423
424	display-timings {
425	native-mode = <&timing0>;
426	timing0: timing {
427	/* 480x800@55Hz */
428	clock-frequency = <23439570>;
429	hactive = <480>;
430	hfront-porch = <16>;
431	hback-porch = <16>;
432	hsync-len = <2>;
433	vactive = <800>;
434	vback-porch = <2>;
435	vfront-porch = <28>;
436	vsync-len = <1>;
437	hsync-active = <0>;
438	vsync-active = <0>;
439	de-active = <0>;
440	pixelclk-active = <0>;
441	};
442	};
443	};
444
445	&onenand {
446	status = "okay";
447	};