]>
Commit | Line | Data |
---|---|---|
655ff266 LD |
1 | /* |
2 | * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board | |
3 | * | |
4 | * Copyright (C) 2013 Atmel, | |
5 | * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> | |
6 | * | |
7 | * Licensed under GPLv2 or later. | |
8 | */ | |
6db64d29 | 9 | #include "sama5d3xcm.dtsi" |
655ff266 LD |
10 | |
11 | / { | |
12 | compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; | |
13 | ||
14 | ahb { | |
15 | apb { | |
16 | mmc0: mmc@f0000000 { | |
17 | pinctrl-names = "default"; | |
18 | pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; | |
19 | status = "okay"; | |
20 | slot@0 { | |
21 | reg = <0>; | |
22 | bus-width = <4>; | |
92f8629b | 23 | cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; |
655ff266 LD |
24 | }; |
25 | }; | |
26 | ||
27 | spi0: spi@f0004000 { | |
28 | m25p80@0 { | |
29 | compatible = "atmel,at25df321a"; | |
30 | spi-max-frequency = <50000000>; | |
31 | reg = <0>; | |
32 | }; | |
33 | }; | |
34 | ||
35 | /* | |
36 | * i2c0 conflicts with ISI: | |
37 | * disable it to allow the use of ISI | |
38 | * can not enable audio when i2c0 disabled | |
39 | */ | |
40 | i2c0: i2c@f0014000 { | |
41 | wm8904: wm8904@1a { | |
42 | compatible = "wm8904"; | |
43 | reg = <0x1a>; | |
44 | }; | |
45 | }; | |
46 | ||
47 | usart1: serial@f0020000 { | |
48 | pinctrl-names = "default"; | |
49 | pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; | |
50 | status = "okay"; | |
51 | }; | |
52 | ||
53 | isi: isi@f0034000 { | |
54 | pinctrl-names = "default"; | |
55 | pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>; | |
56 | }; | |
57 | ||
58 | mmc1: mmc@f8000000 { | |
59 | pinctrl-names = "default"; | |
60 | pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; | |
61 | status = "okay"; | |
62 | slot@0 { | |
63 | reg = <0>; | |
64 | bus-width = <4>; | |
92f8629b | 65 | cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; |
655ff266 LD |
66 | }; |
67 | }; | |
68 | ||
69 | adc0: adc@f8018000 { | |
70 | pinctrl-names = "default"; | |
71 | pinctrl-0 = < | |
72 | &pinctrl_adc0_adtrg | |
73 | &pinctrl_adc0_ad0 | |
74 | &pinctrl_adc0_ad1 | |
75 | &pinctrl_adc0_ad2 | |
76 | &pinctrl_adc0_ad3 | |
77 | &pinctrl_adc0_ad4 | |
78 | >; | |
79 | status = "okay"; | |
80 | }; | |
81 | ||
82 | macb1: ethernet@f802c000 { | |
83 | phy-mode = "rmii"; | |
8c038e7e BB |
84 | |
85 | #address-cells = <1>; | |
86 | #size-cells = <0>; | |
a3a975b1 | 87 | phy0: ethernet-phy@1 { |
8c038e7e BB |
88 | interrupt-parent = <&pioE>; |
89 | interrupts = <30 IRQ_TYPE_EDGE_FALLING>; | |
90 | reg = <1>; | |
91 | }; | |
655ff266 LD |
92 | }; |
93 | ||
94 | pinctrl@fffff200 { | |
95 | board { | |
96 | pinctrl_mmc0_cd: mmc0_cd { | |
97 | atmel,pins = | |
c9d0f317 | 98 | <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */ |
655ff266 LD |
99 | }; |
100 | ||
101 | pinctrl_mmc1_cd: mmc1_cd { | |
102 | atmel,pins = | |
c9d0f317 | 103 | <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */ |
655ff266 LD |
104 | }; |
105 | ||
106 | pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { | |
107 | atmel,pins = | |
c9d0f317 | 108 | <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */ |
655ff266 LD |
109 | }; |
110 | ||
111 | pinctrl_isi_reset: isi_reset-0 { | |
112 | atmel,pins = | |
c9d0f317 | 113 | <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */ |
655ff266 LD |
114 | }; |
115 | ||
116 | pinctrl_isi_power: isi_power-0 { | |
117 | atmel,pins = | |
c9d0f317 | 118 | <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */ |
655ff266 LD |
119 | }; |
120 | ||
121 | pinctrl_usba_vbus: usba_vbus { | |
122 | atmel,pins = | |
c9d0f317 | 123 | <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */ |
655ff266 LD |
124 | }; |
125 | }; | |
126 | }; | |
127 | ||
128 | dbgu: serial@ffffee00 { | |
129 | status = "okay"; | |
130 | }; | |
131 | ||
132 | watchdog@fffffe40 { | |
133 | status = "okay"; | |
134 | }; | |
135 | }; | |
136 | ||
137 | usb0: gadget@00500000 { | |
92f8629b | 138 | atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; |
655ff266 LD |
139 | pinctrl-names = "default"; |
140 | pinctrl-0 = <&pinctrl_usba_vbus>; | |
141 | status = "okay"; | |
142 | }; | |
143 | ||
144 | usb1: ohci@00600000 { | |
145 | num-ports = <3>; | |
92f8629b JCPV |
146 | atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH |
147 | &pioD 26 GPIO_ACTIVE_LOW | |
148 | &pioD 27 GPIO_ACTIVE_LOW | |
655ff266 LD |
149 | >; |
150 | status = "okay"; | |
151 | }; | |
152 | ||
153 | usb2: ehci@00700000 { | |
154 | status = "okay"; | |
155 | }; | |
156 | }; | |
157 | ||
158 | sound { | |
159 | compatible = "atmel,sama5d3ek-wm8904"; | |
160 | pinctrl-names = "default"; | |
161 | pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; | |
162 | ||
163 | atmel,model = "wm8904 @ SAMA5D3EK"; | |
164 | atmel,audio-routing = | |
165 | "Headphone Jack", "HPOUTL", | |
166 | "Headphone Jack", "HPOUTR", | |
167 | "IN2L", "Line In Jack", | |
168 | "IN2R", "Line In Jack", | |
169 | "IN1L", "Mic"; | |
170 | ||
171 | atmel,ssc-controller = <&ssc0>; | |
172 | atmel,audio-codec = <&wm8904>; | |
173 | }; | |
174 | }; |