]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/blame - arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
ARM: dts: sun6i: csq cs908 dts cleanup
[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / sun4i-a10-ba10-tvbox.dts
CommitLineData
97cb8f1e
HG
1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
27f38a77
MR
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
97cb8f1e 8 *
27f38a77
MR
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
97cb8f1e
HG
46 */
47
48/dts-v1/;
71455701
MR
49#include "sun4i-a10.dtsi"
50#include "sunxi-common-regulators.dtsi"
97cb8f1e 51
bca12924
MR
52#include <dt-bindings/gpio/gpio.h>
53
97cb8f1e
HG
54/ {
55 model = "BA10 tvbox";
56 compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
b6ef4c2c
MR
57};
58
59&ehci0 {
60 status = "okay";
61};
62
63&ehci1 {
64 status = "okay";
65};
66
67&emac {
68 pinctrl-names = "default";
69 pinctrl-0 = <&emac_pins_a>;
70 phy = <&phy1>;
71 status = "okay";
72};
97cb8f1e 73
b6ef4c2c
MR
74&i2c0 {
75 pinctrl-names = "default";
76 pinctrl-0 = <&i2c0_pins_a>;
77 status = "okay";
78
79 axp209: pmic@34 {
80 compatible = "x-powers,axp209";
81 reg = <0x34>;
82 interrupts = <0>;
83
84 interrupt-controller;
85 #interrupt-cells = <1>;
97cb8f1e 86 };
b6ef4c2c 87};
97cb8f1e 88
b6ef4c2c
MR
89&ir0 {
90 pinctrl-names = "default";
91 pinctrl-0 = <&ir0_pins_a>;
92 status = "okay";
93};
94
95&mdio {
96 status = "okay";
97
98 phy1: ethernet-phy@1 {
99 reg = <1>;
97cb8f1e 100 };
b6ef4c2c 101};
97cb8f1e 102
b6ef4c2c
MR
103&mmc0 {
104 pinctrl-names = "default";
105 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
106 vmmc-supply = <&reg_vcc3v3>;
107 bus-width = <4>;
108 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
109 cd-inverted;
110 status = "okay";
111};
112
113&ohci0 {
114 status = "okay";
115};
116
117&ohci1 {
118 status = "okay";
119};
120
121&pio {
122 usb2_vbus_pin_a: usb2_vbus_pin@0 {
123 allwinner,pins = "PH12";
97cb8f1e
HG
124 };
125};
b6ef4c2c
MR
126
127&reg_usb1_vbus {
128 status = "okay";
129};
130
131&reg_usb2_vbus {
132 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
133 status = "okay";
134};
135
136&uart0 {
137 pinctrl-names = "default";
138 pinctrl-0 = <&uart0_pins_a>;
139 status = "okay";
140};
141
142&usbphy {
143 usb1_vbus-supply = <&reg_usb1_vbus>;
144 usb2_vbus-supply = <&reg_usb2_vbus>;
145 status = "okay";
146};