[mirror_ubuntu-artful-kernel.git] / arch / arm / boot / dts / sun4i-a10-hackberry.dts

/*
 * Copyright 2012 Maxime Ripard
 *
 * Maxime Ripard <maxime.ripard@free-electrons.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 *     You should have received a copy of the GNU General Public
 *     License along with this file; if not, write to the Free
 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 *     MA 02110-1301 USA
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>

/ {
	model = "Miniand Hackberry";
	compatible = "miniand,hackberry", "allwinner,sun4i-a10";

	reg_emac_3v3: emac-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "emac-3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
	};
};

&ehci0 {
	status = "okay";
};

&ehci1 {
	status = "okay";
};

&emac {
	pinctrl-names = "default";
	pinctrl-0 = <&emac_pins_a>;
	phy = <&phy0>;
	status = "okay";
};

&ir0 {
	pinctrl-names = "default";
	pinctrl-0 = <&ir0_pins_a>;
	status = "okay";
};

&mdio {
	phy-supply = <&reg_emac_3v3>;
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
	vmmc-supply = <&reg_vcc3v3>;
	bus-width = <4>;
	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
	cd-inverted;
	status = "okay";
};

&ohci0 {
	status = "okay";
};

&ohci1 {
	status = "okay";
};

&pio {
	pinctrl-names = "default";
	pinctrl-0 = <&hackberry_hogs>;

	hackberry_hogs: hogs@0 {
		allwinner,pins = "PH19";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
		allwinner,pins = "PH12";
		allwinner,function = "gpio_out";
		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};
};

&reg_usb1_vbus {
	status = "okay";
};

&reg_usb2_vbus {
	pinctrl-0 = <&usb2_vbus_pin_hackberry>;
	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&usbphy {
	usb1_vbus-supply = <&reg_usb1_vbus>;
	usb2_vbus-supply = <&reg_usb2_vbus>;
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins_a>;
	status = "okay";
};
Commit	Line	Data
a9d281ca MR	1	/*
	2	* Copyright 2012 Maxime Ripard
	3	*
	4	* Maxime Ripard <maxime.ripard@free-electrons.com>
	5	*
a762e599 MR	6	* This file is dual-licensed: you can use it either under the terms
	7	* of the GPL or the X11 license, at your option. Note that this dual
	8	* licensing only applies to this file, and not this project as a
	9	* whole.
a9d281ca	10	*
a762e599 MR	11	* a) This file is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of the
	14	* License, or (at your option) any later version.
	15	*
	16	* This file is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public
	22	* License along with this file; if not, write to the Free
	23	* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
	24	* MA 02110-1301 USA
	25	*
	26	* Or, alternatively,
	27	*
	28	* b) Permission is hereby granted, free of charge, to any person
	29	* obtaining a copy of this software and associated documentation
	30	* files (the "Software"), to deal in the Software without
	31	* restriction, including without limitation the rights to use,
	32	* copy, modify, merge, publish, distribute, sublicense, and/or
	33	* sell copies of the Software, and to permit persons to whom the
	34	* Software is furnished to do so, subject to the following
	35	* conditions:
	36	*
	37	* The above copyright notice and this permission notice shall be
	38	* included in all copies or substantial portions of the Software.
	39	*
	40	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	41	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	42	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	43	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	44	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	45	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	46	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	47	* OTHER DEALINGS IN THE SOFTWARE.
a9d281ca MR	48	*/
	49
	50	/dts-v1/;
71455701 MR	51	#include "sun4i-a10.dtsi"
71455701 MR	52	#include "sunxi-common-regulators.dtsi"
a9d281ca	53
bca12924	54	#include <dt-bindings/gpio/gpio.h>
092a0c3b	55	#include <dt-bindings/pinctrl/sun4i-a10.h>
bca12924	56
a9d281ca MR	57	/ {
	58	model = "Miniand Hackberry";
	59	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
	60
5991bbe4 HG	61	reg_emac_3v3: emac-3v3 {
	62	compatible = "regulator-fixed";
	63	regulator-name = "emac-3v3";
	64	regulator-min-microvolt = <3300000>;
	65	regulator-max-microvolt = <3300000>;
	66	enable-active-high;
bca12924	67	gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
d97a079a	68	};
4218f450 MR	69	};
	70
	71	&ehci0 {
	72	status = "okay";
	73	};
	74
	75	&ehci1 {
	76	status = "okay";
	77	};
	78
	79	&emac {
	80	pinctrl-names = "default";
	81	pinctrl-0 = <&emac_pins_a>;
	82	phy = <&phy0>;
	83	status = "okay";
	84	};
	85
	86	&ir0 {
	87	pinctrl-names = "default";
	88	pinctrl-0 = <&ir0_pins_a>;
	89	status = "okay";
	90	};
	91
	92	&mdio {
	93	phy-supply = <&reg_emac_3v3>;
	94	status = "okay";
	95
	96	phy0: ethernet-phy@0 {
	97	reg = <0>;
	98	};
	99	};
ca78c26c	100
4218f450 MR	101	&mmc0 {
	102	pinctrl-names = "default";
	103	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
	104	vmmc-supply = <&reg_vcc3v3>;
	105	bus-width = <4>;
	106	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
	107	cd-inverted;
	108	status = "okay";
	109	};
	110
	111	&ohci0 {
	112	status = "okay";
	113	};
	114
	115	&ohci1 {
	116	status = "okay";
	117	};
	118
	119	&pio {
	120	pinctrl-names = "default";
	121	pinctrl-0 = <&hackberry_hogs>;
	122
	123	hackberry_hogs: hogs@0 {
	124	allwinner,pins = "PH19";
	125	allwinner,function = "gpio_out";
	126	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	127	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
ca78c26c HG	128	};
ca78c26c HG	129
4218f450 MR	130	usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
	131	allwinner,pins = "PH12";
	132	allwinner,function = "gpio_out";
	133	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	134	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
ca78c26c	135	};
a9d281ca	136	};
4218f450 MR	137
	138	&reg_usb1_vbus {
	139	status = "okay";
	140	};
	141
	142	&reg_usb2_vbus {
	143	pinctrl-0 = <&usb2_vbus_pin_hackberry>;
	144	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
	145	status = "okay";
	146	};
	147
	148	&usbphy {
	149	usb1_vbus-supply = <&reg_usb1_vbus>;
	150	usb2_vbus-supply = <&reg_usb2_vbus>;
	151	status = "okay";
	152	};
	153
	154	&uart0 {
	155	pinctrl-names = "default";
	156	pinctrl-0 = <&uart0_pins_a>;
	157	status = "okay";
	158	};