[mirror_ubuntu-eoan-kernel.git] / arch / arm / boot / dts / sun4i-a10-inet9f-rev03.dts

/*
 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

/dts-v1/;
#include "sun4i-a10.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	model = "iNet-9F Rev 03";
	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";

	aliases {
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	gpio-keys {
		compatible = "gpio-keys-polled";
		pinctrl-names = "default";
		pinctrl-0 = <&key_pins_inet9f>;
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		left-joystick-left {
			label = "Left Joystick Left";
			linux,code = <ABS_X>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
		};

		left-joystick-right {
			label = "Left Joystick Right";
			linux,code = <ABS_X>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
		};

		left-joystick-up {
			label = "Left Joystick Up";
			linux,code = <ABS_Y>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
		};

		left-joystick-down {
			label = "Left Joystick Down";
			linux,code = <ABS_Y>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
		};

		right-joystick-left {
			label = "Right Joystick Left";
			linux,code = <ABS_Z>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
		};

		right-joystick-right {
			label = "Right Joystick Right";
			linux,code = <ABS_Z>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
		};

		right-joystick-up {
			label = "Right Joystick Up";
			linux,code = <ABS_RZ>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
		};

		right-joystick-down {
			label = "Right Joystick Down";
			linux,code = <ABS_RZ>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
		};

		dpad-left {
			label = "DPad Left";
			linux,code = <ABS_HAT0X>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
		};

		dpad-right {
			label = "DPad Right";
			linux,code = <ABS_HAT0X>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
		};

		dpad-up {
			label = "DPad Up";
			linux,code = <ABS_HAT0Y>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <0xffffffff>; /* -1 */
			gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
		};

		dpad-down {
			label = "DPad Down";
			linux,code = <ABS_HAT0Y>;
			linux,input-type = <EV_ABS>;
			linux,input-value = <1>;
			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
		};

		x {
			label = "Button X";
			linux,code = <BTN_X>;
			gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
		};

		y {
			label = "Button Y";
			linux,code = <BTN_Y>;
			gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
		};

		a {
			label = "Button A";
			linux,code = <BTN_A>;
			gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
		};

		b {
			label = "Button B";
			linux,code = <BTN_B>;
			gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
		};

		select {
			label = "Select Button";
			linux,code = <BTN_SELECT>;
			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
		};

		start {
			label = "Start Button";
			linux,code = <BTN_START>;
			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
		};

		top-left {
			label = "Top Left Button";
			linux,code = <BTN_TL>;
			gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
		};

		top-right {
			label = "Top Right Button";
			linux,code = <BTN_TR>;
			gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
		};
	};
};

&cpu0 {
	cpu-supply = <&reg_dcdc2>;
};

&ehci1 {
	status = "okay";
};

&i2c0 {
	status = "okay";

	axp209: pmic@34 {
		reg = <0x34>;
		interrupts = <0>;
	};
};

#include "axp209.dtsi"

&i2c1 {
	status = "okay";

	/* Accelerometer */
	bma250@18 {
		compatible = "bosch,bma250";
		reg = <0x18>;
		interrupt-parent = <&pio>;
		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
	};
};

&i2c2 {
	status = "okay";

	ft5406ee8: touchscreen@38 {
		compatible = "edt,edt-ft5406";
		reg = <0x38>;
		interrupt-parent = <&pio>;
		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
		touchscreen-size-x = <800>;
		touchscreen-size-y = <480>;
	};
};

&lradc {
	vref-supply = <&reg_ldo2>;
	status = "okay";

	button-200 {
		label = "Menu";
		linux,code = <KEY_MENU>;
		channel = <0>;
		voltage = <200000>;
	};

	button-600 {
		label = "Volume Up";
		linux,code = <KEY_VOLUMEUP>;
		channel = <0>;
		voltage = <600000>;
	};

	button-800 {
		label = "Volume Down";
		linux,code = <KEY_VOLUMEDOWN>;
		channel = <0>;
		voltage = <800000>;
	};

	button-1000 {
		label = "Home";
		linux,code = <KEY_HOMEPAGE>;
		channel = <0>;
		voltage = <1000000>;
	};

	button-1200 {
		label = "Esc";
		linux,code = <KEY_ESC>;
		channel = <0>;
		voltage = <1200000>;
	};
};

&mmc0 {
	vmmc-supply = <&reg_vcc3v3>;
	bus-width = <4>;
	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
	status = "okay";
};

&otg_sram {
	status = "okay";
};

&pio {
	key_pins_inet9f: key-pins {
		pins = "PA0", "PA1", "PA3", "PA4",
		       "PA5", "PA6", "PA8", "PA9",
		       "PA11", "PA12", "PA13",
		       "PA14", "PA15", "PA16", "PA17",
		       "PH22", "PH23", "PH24", "PH25", "PH26";
		function = "gpio_in";
		bias-pull-up;
	};

	usb0_id_detect_pin: usb0-id-detect-pin {
		pins = "PH4";
		function = "gpio_in";
		bias-pull-up;
	};

	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
		pins = "PH5";
		function = "gpio_in";
		bias-pull-down;
	};
};

&reg_dcdc2 {
	regulator-always-on;
	regulator-min-microvolt = <1000000>;
	regulator-max-microvolt = <1400000>;
	regulator-name = "vdd-cpu";
};

&reg_dcdc3 {
	regulator-always-on;
	regulator-min-microvolt = <1250000>;
	regulator-max-microvolt = <1250000>;
	regulator-name = "vdd-int-dll";
};

&reg_ldo1 {
	regulator-name = "vdd-rtc";
};

&reg_ldo2 {
	regulator-always-on;
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "avcc";
};

&reg_usb0_vbus {
	status = "okay";
};

&reg_usb2_vbus {
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pb_pins>;
	status = "okay";
};

&usb_otg {
	dr_mode = "otg";
	status = "okay";
};

&usbphy {
	pinctrl-names = "default";
	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
	usb0_vbus-supply = <&reg_usb0_vbus>;
	usb2_vbus-supply = <&reg_usb2_vbus>;
	status = "okay";
};
Commit	Line	Data
2ecf488b HG	1	/*
	2	* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
	3	*
	4	* This file is dual-licensed: you can use it either under the terms
	5	* of the GPL or the X11 license, at your option. Note that this dual
	6	* licensing only applies to this file, and not this project as a
	7	* whole.
	8	*
	9	* a) This file is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of the
	12	* License, or (at your option) any later version.
	13	*
	14	* This file is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* Or, alternatively,
	20	*
	21	* b) Permission is hereby granted, free of charge, to any person
	22	* obtaining a copy of this software and associated documentation
	23	* files (the "Software"), to deal in the Software without
	24	* restriction, including without limitation the rights to use,
	25	* copy, modify, merge, publish, distribute, sublicense, and/or
	26	* sell copies of the Software, and to permit persons to whom the
	27	* Software is furnished to do so, subject to the following
	28	* conditions:
	29	*
	30	* The above copyright notice and this permission notice shall be
	31	* included in all copies or substantial portions of the Software.
	32	*
	33	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	34	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	35	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	36	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	37	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	38	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	39	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	40	* OTHER DEALINGS IN THE SOFTWARE.
	41	*/
	42
	43	/dts-v1/;
	44	#include "sun4i-a10.dtsi"
	45	#include "sunxi-common-regulators.dtsi"
	46	#include <dt-bindings/gpio/gpio.h>
	47	#include <dt-bindings/input/input.h>
	48	#include <dt-bindings/interrupt-controller/irq.h>
2ecf488b HG	49
	50	/ {
	51	model = "iNet-9F Rev 03";
	52	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
	53
	54	aliases {
	55	serial0 = &uart0;
	56	};
	57
	58	chosen {
	59	stdout-path = "serial0:115200n8";
	60	};
e6c9b754	61
012d5f38	62	gpio-keys {
e6c9b754 HG	63	compatible = "gpio-keys-polled";
	64	pinctrl-names = "default";
	65	pinctrl-0 = <&key_pins_inet9f>;
	66	#address-cells = <1>;
	67	#size-cells = <0>;
	68	poll-interval = <20>;
	69
f42ff299	70	left-joystick-left {
e6c9b754 HG	71	label = "Left Joystick Left";
	72	linux,code = <ABS_X>;
	73	linux,input-type = <EV_ABS>;
	74	linux,input-value = <0xffffffff>; /* -1 */
	75	gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
	76	};
	77
f42ff299	78	left-joystick-right {
e6c9b754 HG	79	label = "Left Joystick Right";
	80	linux,code = <ABS_X>;
	81	linux,input-type = <EV_ABS>;
	82	linux,input-value = <1>;
	83	gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
	84	};
	85
f42ff299	86	left-joystick-up {
e6c9b754 HG	87	label = "Left Joystick Up";
	88	linux,code = <ABS_Y>;
	89	linux,input-type = <EV_ABS>;
	90	linux,input-value = <0xffffffff>; /* -1 */
	91	gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
	92	};
	93
f42ff299	94	left-joystick-down {
e6c9b754 HG	95	label = "Left Joystick Down";
	96	linux,code = <ABS_Y>;
	97	linux,input-type = <EV_ABS>;
	98	linux,input-value = <1>;
	99	gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
	100	};
	101
f42ff299	102	right-joystick-left {
e6c9b754 HG	103	label = "Right Joystick Left";
	104	linux,code = <ABS_Z>;
	105	linux,input-type = <EV_ABS>;
	106	linux,input-value = <0xffffffff>; /* -1 */
	107	gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
	108	};
	109
f42ff299	110	right-joystick-right {
e6c9b754 HG	111	label = "Right Joystick Right";
	112	linux,code = <ABS_Z>;
	113	linux,input-type = <EV_ABS>;
	114	linux,input-value = <1>;
	115	gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
	116	};
	117
f42ff299	118	right-joystick-up {
e6c9b754 HG	119	label = "Right Joystick Up";
	120	linux,code = <ABS_RZ>;
	121	linux,input-type = <EV_ABS>;
	122	linux,input-value = <0xffffffff>; /* -1 */
	123	gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
	124	};
	125
f42ff299	126	right-joystick-down {
e6c9b754 HG	127	label = "Right Joystick Down";
	128	linux,code = <ABS_RZ>;
	129	linux,input-type = <EV_ABS>;
	130	linux,input-value = <1>;
	131	gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
	132	};
	133
f42ff299	134	dpad-left {
e6c9b754 HG	135	label = "DPad Left";
	136	linux,code = <ABS_HAT0X>;
	137	linux,input-type = <EV_ABS>;
	138	linux,input-value = <0xffffffff>; /* -1 */
	139	gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
	140	};
	141
f42ff299	142	dpad-right {
e6c9b754 HG	143	label = "DPad Right";
	144	linux,code = <ABS_HAT0X>;
	145	linux,input-type = <EV_ABS>;
	146	linux,input-value = <1>;
	147	gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
	148	};
	149
f42ff299	150	dpad-up {
e6c9b754 HG	151	label = "DPad Up";
	152	linux,code = <ABS_HAT0Y>;
	153	linux,input-type = <EV_ABS>;
	154	linux,input-value = <0xffffffff>; /* -1 */
	155	gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
	156	};
	157
f42ff299	158	dpad-down {
e6c9b754 HG	159	label = "DPad Down";
	160	linux,code = <ABS_HAT0Y>;
	161	linux,input-type = <EV_ABS>;
	162	linux,input-value = <1>;
	163	gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
	164	};
	165
f42ff299	166	x {
e6c9b754 HG	167	label = "Button X";
	168	linux,code = <BTN_X>;
	169	gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
	170	};
	171
f42ff299	172	y {
e6c9b754 HG	173	label = "Button Y";
	174	linux,code = <BTN_Y>;
	175	gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
	176	};
	177
f42ff299	178	a {
e6c9b754 HG	179	label = "Button A";
	180	linux,code = <BTN_A>;
	181	gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
	182	};
	183
f42ff299	184	b {
e6c9b754 HG	185	label = "Button B";
	186	linux,code = <BTN_B>;
	187	gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
	188	};
	189
f42ff299	190	select {
e6c9b754 HG	191	label = "Select Button";
	192	linux,code = <BTN_SELECT>;
	193	gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
	194	};
	195
f42ff299	196	start {
e6c9b754 HG	197	label = "Start Button";
	198	linux,code = <BTN_START>;
	199	gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
	200	};
	201
f42ff299	202	top-left {
e6c9b754 HG	203	label = "Top Left Button";
	204	linux,code = <BTN_TL>;
	205	gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
	206	};
	207
f42ff299	208	top-right {
e6c9b754 HG	209	label = "Top Right Button";
	210	linux,code = <BTN_TR>;
	211	gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
	212	};
	213	};
2ecf488b HG	214	};
	215
	216	&cpu0 {
	217	cpu-supply = <&reg_dcdc2>;
	218	};
	219
	220	&ehci1 {
	221	status = "okay";
	222	};
	223
	224	&i2c0 {
2ecf488b HG	225	status = "okay";
	226
	227	axp209: pmic@34 {
	228	reg = <0x34>;
	229	interrupts = <0>;
	230	};
	231	};
	232
	233	#include "axp209.dtsi"
	234
	235	&i2c1 {
2ecf488b HG	236	status = "okay";
	237
	238	/* Accelerometer */
	239	bma250@18 {
	240	compatible = "bosch,bma250";
	241	reg = <0x18>;
	242	interrupt-parent = <&pio>;
	243	interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
	244	};
	245	};
	246
	247	&i2c2 {
2ecf488b	248	status = "okay";
925c8710 HG	249
	250	ft5406ee8: touchscreen@38 {
	251	compatible = "edt,edt-ft5406";
	252	reg = <0x38>;
	253	interrupt-parent = <&pio>;
	254	interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
	255	touchscreen-size-x = <800>;
	256	touchscreen-size-y = <480>;
	257	};
2ecf488b HG	258	};
	259
	260	&lradc {
	261	vref-supply = <&reg_ldo2>;
	262	status = "okay";
	263
86f8b2d3	264	button-200 {
2ecf488b HG	265	label = "Menu";
	266	linux,code = <KEY_MENU>;
	267	channel = <0>;
	268	voltage = <200000>;
	269	};
	270
86f8b2d3	271	button-600 {
2ecf488b HG	272	label = "Volume Up";
	273	linux,code = <KEY_VOLUMEUP>;
	274	channel = <0>;
	275	voltage = <600000>;
	276	};
	277
86f8b2d3	278	button-800 {
2ecf488b HG	279	label = "Volume Down";
	280	linux,code = <KEY_VOLUMEDOWN>;
	281	channel = <0>;
	282	voltage = <800000>;
	283	};
	284
86f8b2d3	285	button-1000 {
2ecf488b HG	286	label = "Home";
	287	linux,code = <KEY_HOMEPAGE>;
	288	channel = <0>;
	289	voltage = <1000000>;
	290	};
	291
86f8b2d3	292	button-1200 {
2ecf488b HG	293	label = "Esc";
	294	linux,code = <KEY_ESC>;
	295	channel = <0>;
	296	voltage = <1200000>;
	297	};
	298	};
	299
	300	&mmc0 {
2ecf488b HG	301	vmmc-supply = <&reg_vcc3v3>;
2ecf488b HG	302	bus-width = <4>;
45e01f40	303	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
2ecf488b HG	304	status = "okay";
	305	};
	306
	307	&otg_sram {
	308	status = "okay";
	309	};
	310
	311	&pio {
012d5f38	312	key_pins_inet9f: key-pins {
1edcd36f MR	313	pins = "PA0", "PA1", "PA3", "PA4",
	314	"PA5", "PA6", "PA8", "PA9",
	315	"PA11", "PA12", "PA13",
	316	"PA14", "PA15", "PA16", "PA17",
	317	"PH22", "PH23", "PH24", "PH25", "PH26";
	318	function = "gpio_in";
	319	bias-pull-up;
e6c9b754 HG	320	};
e6c9b754 HG	321
012d5f38	322	usb0_id_detect_pin: usb0-id-detect-pin {
1edcd36f MR	323	pins = "PH4";
	324	function = "gpio_in";
	325	bias-pull-up;
2ecf488b HG	326	};
2ecf488b HG	327
012d5f38	328	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
1edcd36f MR	329	pins = "PH5";
	330	function = "gpio_in";
	331	bias-pull-down;
2ecf488b HG	332	};
	333	};
	334
	335	&reg_dcdc2 {
	336	regulator-always-on;
	337	regulator-min-microvolt = <1000000>;
	338	regulator-max-microvolt = <1400000>;
	339	regulator-name = "vdd-cpu";
	340	};
	341
	342	&reg_dcdc3 {
	343	regulator-always-on;
	344	regulator-min-microvolt = <1250000>;
	345	regulator-max-microvolt = <1250000>;
	346	regulator-name = "vdd-int-dll";
	347	};
	348
	349	&reg_ldo1 {
	350	regulator-name = "vdd-rtc";
	351	};
	352
	353	&reg_ldo2 {
	354	regulator-always-on;
	355	regulator-min-microvolt = <3000000>;
	356	regulator-max-microvolt = <3000000>;
	357	regulator-name = "avcc";
	358	};
	359
	360	&reg_usb0_vbus {
	361	status = "okay";
	362	};
	363
	364	&reg_usb2_vbus {
	365	status = "okay";
	366	};
	367
	368	&uart0 {
	369	pinctrl-names = "default";
e53bd761	370	pinctrl-0 = <&uart0_pb_pins>;
2ecf488b HG	371	status = "okay";
	372	};
	373
	374	&usb_otg {
	375	dr_mode = "otg";
	376	status = "okay";
	377	};
	378
	379	&usbphy {
	380	pinctrl-names = "default";
	381	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
	382	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
	383	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
	384	usb0_vbus-supply = <&reg_usb0_vbus>;
	385	usb2_vbus-supply = <&reg_usb2_vbus>;
	386	status = "okay";
	387	};