]>
Commit | Line | Data |
---|---|---|
465a225f MR |
1 | /* |
2 | * Copyright 2015 Free Electrons | |
3 | * Copyright 2015 NextThing Co | |
4 | * | |
5 | * Maxime Ripard <maxime.ripard@free-electrons.com> | |
6 | * | |
7 | * This file is dual-licensed: you can use it either under the terms | |
8 | * of the GPL or the X11 license, at your option. Note that this dual | |
9 | * licensing only applies to this file, and not this project as a | |
10 | * whole. | |
11 | * | |
12 | * a) This file is free software; you can redistribute it and/or | |
13 | * modify it under the terms of the GNU General Public License as | |
14 | * published by the Free Software Foundation; either version 2 of the | |
15 | * License, or (at your option) any later version. | |
16 | * | |
17 | * This file is distributed in the hope that it will be useful, | |
18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
20 | * GNU General Public License for more details. | |
21 | * | |
22 | * Or, alternatively, | |
23 | * | |
24 | * b) Permission is hereby granted, free of charge, to any person | |
25 | * obtaining a copy of this software and associated documentation | |
26 | * files (the "Software"), to deal in the Software without | |
27 | * restriction, including without limitation the rights to use, | |
28 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
29 | * sell copies of the Software, and to permit persons to whom the | |
30 | * Software is furnished to do so, subject to the following | |
31 | * conditions: | |
32 | * | |
33 | * The above copyright notice and this permission notice shall be | |
34 | * included in all copies or substantial portions of the Software. | |
35 | * | |
36 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
37 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
38 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
39 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
40 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
41 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
42 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
43 | * OTHER DEALINGS IN THE SOFTWARE. | |
44 | */ | |
45 | ||
46 | /dts-v1/; | |
47 | #include "sun5i-r8.dtsi" | |
48 | #include "sunxi-common-regulators.dtsi" | |
49 | ||
50 | #include <dt-bindings/gpio/gpio.h> | |
51 | #include <dt-bindings/interrupt-controller/irq.h> | |
52 | ||
53 | / { | |
54 | model = "NextThing C.H.I.P."; | |
5fc39d34 | 55 | compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13"; |
465a225f MR |
56 | |
57 | aliases { | |
58 | i2c0 = &i2c0; | |
77df9d66 | 59 | i2c1 = &i2c1; |
465a225f MR |
60 | i2c2 = &i2c2; |
61 | serial0 = &uart1; | |
62 | serial1 = &uart3; | |
77df9d66 | 63 | spi0 = &spi2; |
465a225f MR |
64 | }; |
65 | ||
66 | chosen { | |
67 | stdout-path = "serial0:115200n8"; | |
68 | }; | |
3d3f05e6 MR |
69 | |
70 | leds { | |
71 | compatible = "gpio-leds"; | |
72 | ||
73 | status { | |
74 | label = "chip:white:status"; | |
75 | gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; | |
76 | default-state = "on"; | |
77 | }; | |
78 | }; | |
bb1ea8bf MR |
79 | |
80 | mmc0_pwrseq: mmc0_pwrseq { | |
81 | compatible = "mmc-pwrseq-simple"; | |
82 | pinctrl-names = "default"; | |
83 | pinctrl-0 = <&chip_wifi_reg_on_pin>; | |
84 | reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ | |
85 | }; | |
74194620 AT |
86 | |
87 | onewire { | |
88 | compatible = "w1-gpio"; | |
89 | gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ | |
90 | pinctrl-names = "default"; | |
91 | pinctrl-0 = <&chip_w1_pin>; | |
92 | }; | |
465a225f MR |
93 | }; |
94 | ||
8be0fca6 MR |
95 | &be0 { |
96 | status = "okay"; | |
97 | }; | |
98 | ||
e54693ed MR |
99 | &codec { |
100 | status = "okay"; | |
101 | }; | |
102 | ||
db30fce1 MR |
103 | &cpu0 { |
104 | cpu-supply = <®_dcdc2>; | |
105 | }; | |
106 | ||
465a225f MR |
107 | &ehci0 { |
108 | status = "okay"; | |
109 | }; | |
110 | ||
111 | &i2c0 { | |
112 | pinctrl-names = "default"; | |
113 | pinctrl-0 = <&i2c0_pins_a>; | |
114 | status = "okay"; | |
115 | ||
116 | axp209: pmic@34 { | |
117 | reg = <0x34>; | |
118 | ||
119 | /* | |
120 | * The interrupt is routed through the "External Fast | |
121 | * Interrupt Request" pin (ball G13 of the module) | |
122 | * directly to the main interrupt controller, without | |
123 | * any other controller interfering. | |
124 | */ | |
125 | interrupts = <0>; | |
126 | }; | |
127 | }; | |
128 | ||
129 | #include "axp209.dtsi" | |
130 | ||
34723075 QS |
131 | &ac_power_supply { |
132 | status = "okay"; | |
133 | }; | |
134 | ||
b9107d37 QS |
135 | &battery_power_supply { |
136 | status = "okay"; | |
137 | }; | |
138 | ||
77df9d66 MR |
139 | &i2c1 { |
140 | pinctrl-names = "default"; | |
141 | pinctrl-0 = <&i2c1_pins_a>; | |
142 | status = "disabled"; | |
143 | }; | |
144 | ||
465a225f MR |
145 | &i2c2 { |
146 | pinctrl-names = "default"; | |
147 | pinctrl-0 = <&i2c2_pins_a>; | |
148 | status = "okay"; | |
149 | ||
150 | xio: gpio@38 { | |
151 | compatible = "nxp,pcf8574a"; | |
152 | reg = <0x38>; | |
153 | ||
154 | gpio-controller; | |
155 | #gpio-cells = <2>; | |
156 | ||
157 | interrupt-parent = <&pio>; | |
158 | interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; | |
159 | interrupt-controller; | |
160 | #interrupt-cells = <2>; | |
161 | }; | |
162 | }; | |
163 | ||
bb1ea8bf | 164 | &mmc0_pins_a { |
1edcd36f | 165 | bias-pull-up; |
bb1ea8bf MR |
166 | }; |
167 | ||
465a225f MR |
168 | &mmc0 { |
169 | pinctrl-names = "default"; | |
170 | pinctrl-0 = <&mmc0_pins_a>; | |
171 | vmmc-supply = <®_vcc3v3>; | |
bb1ea8bf | 172 | mmc-pwrseq = <&mmc0_pwrseq>; |
465a225f MR |
173 | bus-width = <4>; |
174 | non-removable; | |
175 | status = "okay"; | |
176 | }; | |
177 | ||
178 | &ohci0 { | |
179 | status = "okay"; | |
180 | }; | |
181 | ||
182 | &otg_sram { | |
183 | status = "okay"; | |
184 | }; | |
185 | ||
186 | &pio { | |
187 | chip_vbus_pin: chip_vbus_pin@0 { | |
1edcd36f MR |
188 | pins = "PB10"; |
189 | function = "gpio_out"; | |
465a225f MR |
190 | }; |
191 | ||
bb1ea8bf | 192 | chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { |
1edcd36f MR |
193 | pins = "PC19"; |
194 | function = "gpio_out"; | |
bb1ea8bf MR |
195 | }; |
196 | ||
465a225f | 197 | chip_id_det_pin: chip_id_det_pin@0 { |
1edcd36f MR |
198 | pins = "PG2"; |
199 | function = "gpio_in"; | |
465a225f | 200 | }; |
74194620 AT |
201 | |
202 | chip_w1_pin: chip_w1_pin@0 { | |
1edcd36f MR |
203 | pins = "PD2"; |
204 | function = "gpio_in"; | |
205 | bias-pull-up; | |
74194620 | 206 | }; |
465a225f MR |
207 | }; |
208 | ||
209 | ®_dcdc2 { | |
210 | regulator-min-microvolt = <1000000>; | |
211 | regulator-max-microvolt = <1400000>; | |
212 | regulator-name = "cpuvdd"; | |
213 | regulator-always-on; | |
214 | }; | |
215 | ||
216 | ®_dcdc3 { | |
217 | regulator-min-microvolt = <1000000>; | |
218 | regulator-max-microvolt = <1300000>; | |
219 | regulator-name = "corevdd"; | |
220 | regulator-always-on; | |
221 | }; | |
222 | ||
223 | ®_ldo1 { | |
224 | regulator-name = "rtcvdd"; | |
225 | }; | |
226 | ||
227 | ®_ldo2 { | |
228 | regulator-min-microvolt = <2700000>; | |
229 | regulator-max-microvolt = <3300000>; | |
230 | regulator-name = "avcc"; | |
231 | regulator-always-on; | |
232 | }; | |
233 | ||
bb1ea8bf MR |
234 | /* |
235 | * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT | |
236 | * Chip. | |
237 | * | |
238 | * If those are not enabled, the SDIO part will not enumerate, and | |
239 | * since there's no way currently to pass DT infos to an SDIO device, | |
240 | * we cannot really do better than this ugly hack for now. | |
241 | */ | |
242 | ®_ldo3 { | |
243 | regulator-min-microvolt = <3300000>; | |
244 | regulator-max-microvolt = <3300000>; | |
245 | regulator-name = "vcc-wifi-1"; | |
246 | regulator-always-on; | |
247 | }; | |
248 | ||
249 | ®_ldo4 { | |
250 | regulator-min-microvolt = <3300000>; | |
251 | regulator-max-microvolt = <3300000>; | |
252 | regulator-name = "vcc-wifi-2"; | |
253 | regulator-always-on; | |
254 | }; | |
255 | ||
465a225f MR |
256 | ®_ldo5 { |
257 | regulator-min-microvolt = <1800000>; | |
258 | regulator-max-microvolt = <1800000>; | |
259 | regulator-name = "vcc-1v8"; | |
260 | }; | |
261 | ||
262 | ®_usb0_vbus { | |
263 | pinctrl-0 = <&chip_vbus_pin>; | |
264 | vin-supply = <®_vcc5v0>; | |
265 | gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ | |
266 | status = "okay"; | |
267 | }; | |
268 | ||
77df9d66 MR |
269 | &spi2 { |
270 | pinctrl-names = "default"; | |
271 | pinctrl-0 = <&spi2_pins_a>; | |
272 | status = "disabled"; | |
273 | }; | |
274 | ||
8be0fca6 MR |
275 | &tcon0 { |
276 | status = "okay"; | |
277 | }; | |
278 | ||
279 | &tve0 { | |
280 | status = "okay"; | |
281 | }; | |
282 | ||
465a225f MR |
283 | &uart1 { |
284 | pinctrl-names = "default"; | |
285 | pinctrl-0 = <&uart1_pins_b>; | |
286 | status = "okay"; | |
287 | }; | |
288 | ||
289 | &uart3 { | |
290 | pinctrl-names = "default"; | |
291 | pinctrl-0 = <&uart3_pins_a>, | |
e6f50b22 | 292 | <&uart3_cts_rts_pins_a>; |
465a225f MR |
293 | status = "okay"; |
294 | }; | |
295 | ||
296 | &usb_otg { | |
297 | dr_mode = "otg"; | |
298 | status = "okay"; | |
299 | }; | |
300 | ||
301 | &usb_power_supply { | |
302 | status = "okay"; | |
303 | }; | |
304 | ||
305 | &usbphy { | |
306 | pinctrl-names = "default"; | |
307 | pinctrl-0 = <&chip_id_det_pin>; | |
308 | status = "okay"; | |
309 | ||
310 | usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ | |
311 | usb0_vbus_power-supply = <&usb_power_supply>; | |
312 | usb0_vbus-supply = <®_usb0_vbus>; | |
313 | usb1_vbus-supply = <®_vcc5v0>; | |
314 | }; |