]>
Commit | Line | Data |
---|---|---|
a5ea06d0 KM |
1 | /* |
2 | * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com> | |
3 | * Copyright 2015 Karsten Merker <merker@debian.org> | |
4 | * Copyright 2015 Chen-Yu Tsai <wens@csie.org> | |
5 | * | |
6 | * This file is dual-licensed: you can use it either under the terms | |
7 | * of the GPL or the X11 license, at your option. Note that this dual | |
8 | * licensing only applies to this file, and not this project as a | |
9 | * whole. | |
10 | * | |
11 | * a) This file is free software; you can redistribute it and/or | |
12 | * modify it under the terms of the GNU General Public License as | |
13 | * published by the Free Software Foundation; either version 2 of the | |
14 | * License, or (at your option) any later version. | |
15 | * | |
16 | * This file is distributed in the hope that it will be useful, | |
17 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 | * GNU General Public License for more details. | |
20 | * | |
21 | * Or, alternatively, | |
22 | * | |
23 | * b) Permission is hereby granted, free of charge, to any person | |
24 | * obtaining a copy of this software and associated documentation | |
25 | * files (the "Software"), to deal in the Software without | |
26 | * restriction, including without limitation the rights to use, | |
27 | * copy, modify, merge, publish, distribute, sublicense, and/or | |
28 | * sell copies of the Software, and to permit persons to whom the | |
29 | * Software is furnished to do so, subject to the following | |
30 | * conditions: | |
31 | * | |
32 | * The above copyright notice and this permission notice shall be | |
33 | * included in all copies or substantial portions of the Software. | |
34 | * | |
35 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
36 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES | |
37 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | |
38 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT | |
39 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, | |
40 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
41 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR | |
42 | * OTHER DEALINGS IN THE SOFTWARE. | |
43 | */ | |
44 | ||
45 | /dts-v1/; | |
46 | #include "sun6i-a31s.dtsi" | |
47 | #include "sunxi-common-regulators.dtsi" | |
48 | ||
49 | #include <dt-bindings/gpio/gpio.h> | |
50 | #include <dt-bindings/input/input.h> | |
a5ea06d0 KM |
51 | |
52 | / { | |
53 | model = "MSI Primo81 tablet"; | |
54 | compatible = "msi,primo81", "allwinner,sun6i-a31s"; | |
55 | }; | |
56 | ||
57 | &cpu0 { | |
58 | cpu-supply = <®_dcdc3>; | |
59 | }; | |
60 | ||
61 | &ehci0 { | |
62 | /* rtl8188etv wifi is connected here */ | |
63 | status = "okay"; | |
64 | }; | |
65 | ||
66 | &i2c0 { | |
67 | /* pull-ups and device VDDIO use AXP221 DLDO3 */ | |
68 | pinctrl-names = "default"; | |
69 | pinctrl-0 = <&i2c0_pins_a>; | |
70 | status = "failed"; | |
71 | }; | |
72 | ||
73 | &i2c1 { | |
74 | pinctrl-names = "default"; | |
75 | pinctrl-0 = <&i2c1_pins_a>; | |
76 | status = "okay"; | |
77 | ||
78 | ctp@5d { | |
79 | pinctrl-names = "default"; | |
80 | pinctrl-0 = <>911_int_primo81>; | |
81 | compatible = "goodix,gt911"; | |
82 | reg = <0x5d>; | |
83 | interrupt-parent = <&pio>; | |
84 | interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ | |
c65d2359 | 85 | touchscreen-swapped-x-y; |
a5ea06d0 KM |
86 | }; |
87 | }; | |
88 | ||
89 | &i2c2 { | |
90 | pinctrl-names = "default"; | |
91 | pinctrl-0 = <&i2c2_pins_a>; | |
92 | status = "okay"; | |
93 | ||
94 | accelerometer@1c { | |
95 | pinctrl-names = "default"; | |
96 | pinctrl-0 = <&mma8452_int_primo81>; | |
97 | compatible = "fsl,mma8452"; | |
98 | reg = <0x1c>; | |
99 | interrupt-parent = <&pio>; | |
100 | interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */ | |
101 | #io-channel-cells = <1>; | |
102 | }; | |
103 | }; | |
104 | ||
105 | &lradc { | |
106 | vref-supply = <®_aldo3>; | |
107 | status = "okay"; | |
108 | ||
109 | button@158 { | |
110 | label = "Volume Up"; | |
111 | linux,code = <KEY_VOLUMEUP>; | |
112 | channel = <0>; | |
113 | voltage = <158730>; | |
114 | }; | |
115 | ||
116 | button@349 { | |
117 | label = "Volume Down"; | |
118 | linux,code = <KEY_VOLUMEDOWN>; | |
119 | channel = <0>; | |
120 | voltage = <349206>; | |
121 | }; | |
122 | }; | |
123 | ||
124 | &mmc0 { | |
125 | pinctrl-names = "default"; | |
126 | pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; | |
127 | vmmc-supply = <®_dcdc1>; | |
128 | bus-width = <4>; | |
129 | cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ | |
130 | cd-inverted; | |
131 | status = "okay"; | |
132 | }; | |
133 | ||
134 | &pio { | |
135 | gt911_int_primo81: gt911_int_pin@0 { | |
1edcd36f MR |
136 | pins = "PA3"; |
137 | function = "gpio_in"; | |
a5ea06d0 KM |
138 | }; |
139 | ||
140 | mma8452_int_primo81: mma8452_int_pin@0 { | |
1edcd36f MR |
141 | pins = "PA9"; |
142 | function = "gpio_in"; | |
143 | bias-pull-up; | |
a5ea06d0 KM |
144 | }; |
145 | ||
146 | mmc0_cd_pin_primo81: mmc0_cd_pin@0 { | |
1edcd36f MR |
147 | pins = "PA8"; |
148 | function = "gpio_in"; | |
149 | bias-pull-up; | |
a5ea06d0 KM |
150 | }; |
151 | }; | |
152 | ||
153 | &p2wi { | |
154 | status = "okay"; | |
155 | ||
156 | axp22x: pmic@68 { | |
157 | compatible = "x-powers,axp221"; | |
158 | reg = <0x68>; | |
159 | interrupt-parent = <&nmi_intc>; | |
160 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
723ca929 | 161 | x-powers,drive-vbus-en; |
a5ea06d0 KM |
162 | }; |
163 | }; | |
164 | ||
165 | #include "axp22x.dtsi" | |
166 | ||
167 | ®_aldo3 { | |
168 | regulator-always-on; | |
169 | regulator-min-microvolt = <2700000>; | |
170 | regulator-max-microvolt = <3300000>; | |
171 | regulator-name = "avcc"; | |
172 | }; | |
173 | ||
174 | ®_dc1sw { | |
a5ea06d0 KM |
175 | regulator-name = "vcc-lcd"; |
176 | }; | |
177 | ||
178 | ®_dc5ldo { | |
179 | regulator-min-microvolt = <700000>; | |
180 | regulator-max-microvolt = <1320000>; | |
181 | regulator-name = "vdd-cpus"; /* This is an educated guess */ | |
182 | }; | |
183 | ||
184 | ®_dcdc1 { | |
185 | regulator-always-on; | |
186 | regulator-min-microvolt = <3000000>; | |
187 | regulator-max-microvolt = <3000000>; | |
188 | regulator-name = "vcc-3v0"; | |
189 | }; | |
190 | ||
191 | ®_dcdc2 { | |
192 | regulator-min-microvolt = <700000>; | |
193 | regulator-max-microvolt = <1320000>; | |
194 | regulator-name = "vdd-gpu"; | |
195 | }; | |
196 | ||
197 | ®_dcdc3 { | |
198 | regulator-always-on; | |
199 | regulator-min-microvolt = <700000>; | |
200 | regulator-max-microvolt = <1320000>; | |
201 | regulator-name = "vdd-cpu"; | |
202 | }; | |
203 | ||
204 | ®_dcdc4 { | |
205 | regulator-always-on; | |
206 | regulator-min-microvolt = <700000>; | |
207 | regulator-max-microvolt = <1320000>; | |
208 | regulator-name = "vdd-sys-dll"; | |
209 | }; | |
210 | ||
211 | ®_dcdc5 { | |
212 | regulator-always-on; | |
213 | regulator-min-microvolt = <1500000>; | |
214 | regulator-max-microvolt = <1500000>; | |
215 | regulator-name = "vcc-dram"; | |
216 | }; | |
217 | ||
218 | ®_dldo1 { | |
219 | regulator-min-microvolt = <3300000>; | |
220 | regulator-max-microvolt = <3300000>; | |
221 | regulator-name = "vcc-wifi"; | |
222 | }; | |
223 | ||
224 | ®_dldo3 { | |
225 | regulator-min-microvolt = <2800000>; | |
226 | regulator-max-microvolt = <2800000>; | |
227 | regulator-name = "vddio-csi"; | |
228 | }; | |
229 | ||
723ca929 CYT |
230 | ®_drivevbus { |
231 | regulator-name = "usb0-vbus"; | |
232 | status = "okay"; | |
233 | }; | |
234 | ||
a5ea06d0 KM |
235 | ®_eldo3 { |
236 | regulator-min-microvolt = <1080000>; | |
237 | regulator-max-microvolt = <1320000>; | |
238 | regulator-name = "vdd-mipi-bridge"; | |
239 | }; | |
240 | ||
241 | &simplefb_lcd { | |
242 | vcc-lcd-supply = <®_dc1sw>; | |
243 | vdd-mipi-bridge-supply = <®_eldo3>; | |
244 | }; | |
245 | ||
246 | &usb_otg { | |
723ca929 CYT |
247 | dr_mode = "otg"; |
248 | status = "okay"; | |
249 | }; | |
250 | ||
251 | &usb_power_supply { | |
a5ea06d0 KM |
252 | status = "okay"; |
253 | }; | |
254 | ||
255 | &usbphy { | |
723ca929 CYT |
256 | usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ |
257 | usb0_vbus_power-supply = <&usb_power_supply>; | |
258 | usb0_vbus-supply = <®_drivevbus>; | |
a5ea06d0 KM |
259 | usb1_vbus-supply = <®_dldo1>; |
260 | status = "okay"; | |
261 | }; |